AC_PREREQ(2.60)
AC_INIT([rtems-c-src-lib-libbsp-powerpc-qoriq],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
AC_CONFIG_SRCDIR([bsp_specs])
RTEMS_TOP(../../../../../..)

RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
RTEMS_BSP_CONFIGURE

RTEMS_PROG_CC_FOR_TARGET
RTEMS_CANONICALIZE_TOOLS
RTEMS_PROG_CCAS

RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1])
RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED

RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1])
RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED

RTEMS_BSPOPTS_SET([BSP_CONSOLE_BAUD],[*],[115200])
RTEMS_BSPOPTS_HELP([BSP_CONSOLE_BAUD],[default baud for console and other serial devices])

RTEMS_BSPOPTS_SET([BSP_USE_UART_INTERRUPTS],[*],[1])
RTEMS_BSPOPTS_HELP([BSP_USE_UART_INTERRUPTS],[enable usage of interrupts for the UART modules])

RTEMS_BSPOPTS_SET([HAS_UBOOT],[*],[1])
RTEMS_BSPOPTS_HELP([HAS_UBOOT],[enables U-Boot support])

RTEMS_BSPOPTS_SET([QORIQ_ETSEC_1_PHY_ADDR],[*],[-1])
RTEMS_BSPOPTS_HELP([QORIQ_ETSEC_1_PHY_ADDR],[PHY address for eTSEC interface 1])

RTEMS_BSPOPTS_SET([QORIQ_ETSEC_2_PHY_ADDR],[*],[0])
RTEMS_BSPOPTS_HELP([QORIQ_ETSEC_2_PHY_ADDR],[PHY address for eTSEC interface 2])

RTEMS_BSPOPTS_SET([QORIQ_ETSEC_3_PHY_ADDR],[*],[1])
RTEMS_BSPOPTS_HELP([QORIQ_ETSEC_3_PHY_ADDR],[PHY address for eTSEC interface 3])

RTEMS_BSPOPTS_SET([QORIQ_UART_0_ENABLE],[qoriq_core_0],[1])
RTEMS_BSPOPTS_SET([QORIQ_UART_0_ENABLE],[qoriq_p1020rdb],[1])
RTEMS_BSPOPTS_SET([QORIQ_UART_0_ENABLE],[*],[0])
RTEMS_BSPOPTS_HELP([QORIQ_UART_0_ENABLE],[use 1 to enable UART 0, otherwise use 0])

RTEMS_BSPOPTS_SET([QORIQ_UART_1_ENABLE],[qoriq_core_0],[1])
RTEMS_BSPOPTS_SET([QORIQ_UART_1_ENABLE],[qoriq_p1020rdb],[1])
RTEMS_BSPOPTS_SET([QORIQ_UART_1_ENABLE],[*],[0])
RTEMS_BSPOPTS_HELP([QORIQ_UART_1_ENABLE],[use 1 to enable UART 1, otherwise use 0])

RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_MASTER_CORE],[*],[0])
RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_MASTER_CORE],[UART to Intercom bridge master core index])

RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_SLAVE_CORE],[*],[1])
RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_SLAVE_CORE],[UART to Intercom bridge slave core index])

RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_TASK_PRIORITY],[*],[250])
RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_TASK_PRIORITY],[UART to Intercom bridge task priority])

RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_0_ENABLE],[*],[0])
RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_0_ENABLE],[use 1 to enable UART 0 to Intercom bridge, otherwise use 0])

RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_1_ENABLE],[qoriq_core_0],[1])
RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_1_ENABLE],[qoriq_core_1],[1])
RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_1_ENABLE],[*],[0])
RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_1_ENABLE],[use 1 to enable UART 1 to Intercom bridge, otherwise use 0])

RTEMS_BSPOPTS_SET([BSP_DISABLE_UBOOT_WORK_AREA_CONFIG],[*],[1])
RTEMS_BSPOPTS_HELP([BSP_DISABLE_UBOOT_WORK_AREA_CONFIG],[disable U-Boot work area configuration])

RTEMS_BSPOPTS_SET([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[*],[1])
RTEMS_BSPOPTS_HELP([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[indicate that the interrupt stack is at the work area begin])

RTEMS_BSPOPTS_SET([QORIQ_INTERCOM_AREA_BEGIN],[*],[0x3000000])
RTEMS_BSPOPTS_HELP([QORIQ_INTERCOM_AREA_BEGIN],[inter-processor communication area begin])
RTEMS_BSPOPTS_SET([QORIQ_INTERCOM_AREA_SIZE],[*],[0x1000000])
RTEMS_BSPOPTS_HELP([QORIQ_INTERCOM_AREA_SIZE],[inter-processor communication area size])

RTEMS_BSPOPTS_SET([QORIQ_INITIAL_MSR],[*],[0x02000200])
RTEMS_BSPOPTS_HELP([QORIQ_INITIAL_MSR],[initial MSR value])

RTEMS_BSPOPTS_SET([QORIQ_INITIAL_SPEFSCR],[*],[0x00000000])
RTEMS_BSPOPTS_HELP([QORIQ_INITIAL_SPEFSCR],[initial SPEFSCR value])

RTEMS_BSPOPTS_SET([QORIQ_CLOCK_TIMER],[qoriq_core_1],[4])
RTEMS_BSPOPTS_SET([QORIQ_CLOCK_TIMER],[*],[0])
RTEMS_BSPOPTS_HELP([QORIQ_CLOCK_TIMER],[global timer used for system clock, 0..3 maps to A0..A3, and 4..7 maps to B0..B3])

RTEMS_CHECK_NETWORKING
AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")

RTEMS_BSP_CLEANUP_OPTIONS(0, 0)
RTEMS_PPC_EXCEPTIONS
RTEMS_BSP_LINKCMDS

AC_CONFIG_FILES([Makefile])
AC_OUTPUT