2009-10-13	Till Straumann <strauman@slac.stanford.edu>

	PR 1451/bsps
	* network/tsec.c: Fix mbuf leak when watchdog expires. The
	re-initialization algorithm failed to release mbuf chains
	held in the TX ring.
	Also, during initialization the initial link status is determined
	and IFF_OACTIVE set if no active link was detected.

2009-08-17	Till Straumann <strauman@slac.stanford.edu>

	* network/tsec.c, network/if_tsec_pub.h:
	Fixed bugs in multicast support; added reference-count
	for hash-table entries which allows for the implementation
	of a 'deletion' routine.
	NOTE: mcast support largely untested.

2009-06-05	Till Straumann <strauman@slac.stanford.edu>

	* irq/irq_init.c: silenced compiler warning.

2009-06-05	Till Straumann <strauman@slac.stanford.edu>

	* network/tsec.c, network/if_tsec_pub.h:
	implemented multicast support.

2009-03-05	Till Straumann <strauman@slac.stanford.edu>

	* startup/bspstart.c: removed legacy code (inherited
	from old mvme2307 BSP) -- for testing trapping into
	PPCBug -- which is irrelevant on this BSP.
	Removed warning about SPRG0 having been reassigned
	-- this BSP is OK.

2008-12-08	Ralf Corsépius <ralf.corsepius@rtems.org>

	* bsp_specs: Backport from CVS-HEAD.

2008-09-24	Ralf Corsépius <ralf.corsepius@rtems.org>

	PR 1322/bsps
	* include/bspopts.h.in: Remove.

2008-08-20	Ralf Corsépius <ralf.corsepius@rtems.org>

	* i2c/i2c_init.c, i2c/mpc8540_i2c.c, irq/irq_init.c,
	network/tsec.c, pci/detect_host_bridge.c, startup/bspstart.c:
	Add missing prototypes.

2008-08-20	Ralf Corsépius <ralf.corsepius@rtems.org>

	* Makefile.am: Cleanup.

2008-07-18	Till Straumann <strauman@slac.stanford.edu>

	* startup/bspstart.c: removed warning about SPRG0
	now being used for IRQ mask; this BSP is OK.

2008-06-04	Joel Sherrill <joel.sherrill@OARcorp.com>

	* Makefile.am, preinstall.am: Need tm27.h

2008-05-15	Joel Sherrill <joel.sherrill@OARcorp.com>

	* Makefile.am: Remove stray line.

2008-05-14	Joel Sherrill <joel.sherrill@OARcorp.com>

	* Makefile.am: Rework to avoid .rel files.

2008-05-10	Till Straumann <strauman@slac.stanford.edu>

	* network/tsec.c: removed memory input/output operands
	which caused problems with gcc-4.3.0 (see
	http://gcc.gnu.org/ml/gcc/2008-03/msg00976.html)

2008-03-25	Till Straumann <strauman@slac.stanford.edu>

	* include/bsp.h: declare BSP_commandline_string.

2008-03-20	Till Straumann <strauman@slac.stanford.edu>

	* include/bsp.h, startup/bspstart.c: confdefs.h now wants
	us to use BSP_INTERRUPT_STACK_SIZE instead of
	CONFIGURE_INTERRUPT_STACK_MEMORY.

2008-03-05	Till Straumann <strauman@slac.stanford.edu>

	* start/start.S, startup/bspstart.c: disable memory-select
	errors early (in start.S) to avoid hangs due to speculative
	memory access (motload maps absent memory in TLBs).
	Remove TLB mappings for which no physical memory is installed
	(bspstart). Enable HID1[RFXE] so that 'core_fault_in' errors
	result in a machine-check rather than stalling the machine.
	Re-enable memory-select errors at this point.

2008-03-05	Till Straumann <strauman@slac.stanford.edu>

	* Makefile.am: add e500/mmu.rel to libbsp_a_LIBADD.

2008-01-29	Eric Norum <norume@aps.anl.gov>

	* startup/bspstart.c: Fixes a lockup which occurs when a speculative
	load occurs from a particular range of memory.

2008-01-09	Eric Norum <norume@aps.anl.gov>

	* include/bsp.h: Include <bsp/vectors.h>.

2007-12-13	Till Straumann <strauman@slac.stanford.edu>

	* Makefile.am: use preload.S, vectors_entry.S from shared
	area.