/*
 *  bsp.h  -- contain BSP API definition.
 *
 *  Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
 *
 *  The license and distribution terms for this file may be
 *  found in found in the file LICENSE in this distribution or at
 *  http://www.rtems.com/license/LICENSE.
 *
 * $Id$
 */
#ifndef LIBBSP_POWERPC_MOTOROLA_SHARED_BSP_H
#define LIBBSP_POWERPC_MOTOROLA_SHARED_BSP_H

#include <bspopts.h>

#include <rtems.h>
#include <rtems/console.h>
#include <libcpu/io.h>
#include <rtems/clockdrv.h>
#include <bsp/vectors.h>

/*
 *  confdefs.h overrides for this BSP:
 *   - termios serial ports (defaults to 1)
 *   - Interrupt stack space is not minimum if defined.
 */

#if !defined(mvme2100)
#define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2
#endif

#define CONFIGURE_INTERRUPT_STACK_MEMORY  (16 * 1024)

/* fundamental addresses for BSP (CHRPxxx and PREPxxx are from libcpu/io.h) */
#if defined(mvme2100)
#define	_IO_BASE		CHRP_ISA_IO_BASE
#define	_ISA_MEM_BASE		CHRP_ISA_MEM_BASE
/* address of our ram on the PCI bus   */
#define	PCI_DRAM_OFFSET		CHRP_PCI_DRAM_OFFSET
#define PCI_MEM_BASE		0x80000000 
#define PCI_MEM_BASE_ADJUSTMENT	0

#else
#define	_IO_BASE		PREP_ISA_IO_BASE
#define	_ISA_MEM_BASE		PREP_ISA_MEM_BASE
/* address of our ram on the PCI bus   */
#define	PCI_DRAM_OFFSET		PREP_PCI_DRAM_OFFSET
/* offset of pci memory as seen from the CPU */
#define PCI_MEM_BASE		PREP_ISA_MEM_BASE
#define PCI_MEM_BASE_ADJUSTMENT	PREP_ISA_MEM_BASE
#endif


/*
 *  Base address definitions for several devices
 *
 *  MVME2100 is very similar but has fewer devices and uses on-CPU EPIC
 *  implementation of OpenPIC controller.  It also cannot be probed to
 *  find out what it is which is VERY different from other Motorola boards.
 */

#if defined(mvme2100)
#define BSP_UART_IOBASE_COM1 ((_IO_BASE)+0x01e10000)
/* #define BSP_UART_IOBASE_COM1     (0xffe10000) */
#define BSP_OPEN_PIC_BASE_OFFSET 0x40000

#define MVME_HAS_DEC21140
#else
#define BSP_UART_IOBASE_COM1 ((_IO_BASE)+0x3f8)
#define BSP_UART_IOBASE_COM2 ((_IO_BASE)+0x2f8)

#define BSP_KBD_IOBASE       ((_IO_BASE)+0x60)
#define BSP_VGA_IOBASE       ((_IO_BASE)+0x3c0)

#if defined(mvme2300)
#define MVME_HAS_DEC21140
#endif
#endif

#define BSP_CONSOLE_PORT	BSP_UART_COM1
#define BSP_UART_BAUD_BASE	115200

#include <bsp/openpic.h>
#define BSP_PIC_DO_EOI openpic_eoi(0)

#ifndef ASM
#define outport_byte(port,value) outb(value,port)
#define outport_word(port,value) outw(value,port)
#define outport_long(port,value) outl(value,port)

#define inport_byte(port,value) (value = inb(port))
#define inport_word(port,value) (value = inw(port))
#define inport_long(port,value) (value = inl(port))

/*
 * Vital Board data Start using DATA RESIDUAL
 */

/*
 * Total memory using RESIDUAL DATA
 */
extern unsigned int BSP_mem_size;
/*
 * PCI Bus Frequency
 */
extern unsigned int BSP_bus_frequency;
/*
 * processor clock frequency
 */
extern unsigned int BSP_processor_frequency;
/*
 * Time base divisior (how many tick for 1 second).
 */
extern unsigned int BSP_time_base_divisor;

#define BSP_Convert_decrementer( _value ) \
  ((unsigned long long) ((((unsigned long long)BSP_time_base_divisor) * 1000000ULL) /((unsigned long long) BSP_bus_frequency)) * ((unsigned long long) (_value)))

extern rtems_configuration_table  BSP_Configuration;
extern void BSP_panic(char *s);
extern void rtemsReboot(void);
/* extern int printk(const char *, ...) __attribute__((format(printf, 1, 2))); */
extern int BSP_disconnect_clock_handler (void);
extern int BSP_connect_clock_handler (void);

/* clear hostbridge errors
 *
 * enableMCP: whether to enable MCP checkstop / machine check interrupts
 *            on the hostbridge and in HID0.
 *
 *            NOTE: HID0 and MEREN are left alone if this flag is 0
 *
 * quiet    : be silent
 *
 * RETURNS  : raven MERST register contents (lowermost 16 bits), 0 if
 *            there were no errors
 */
extern unsigned long _BSP_clear_hostbridge_errors(int enableMCP, int quiet);

#endif

#endif