# # $Id$ # This file documents the on board monitor (PPCBUG) configuration used to be able to boot the archives located in powerpc-rtems/c/mcp750/bin. This information was provided by Eric Valette ----------------------- ENV command-------------- PPC1-Bug>env Bug or System environment [B/S] = B? Field Service Menu Enable [Y/N] = N? Probe System for Supported I/O Controllers [Y/N] = Y? Auto-Initialize of NVRAM Header Enable [Y/N] = Y? Network PReP-Boot Mode Enable [Y/N] = Y? <==================== SCSI Bus Reset on Debugger Startup [Y/N] = N? Primary SCSI Bus Negotiations Type [A/S/N] = A? Primary SCSI Data Bus Width [W/N] = N? Secondary SCSI Identifier = "07"? NVRAM Boot List (GEV.fw-boot-path) Boot Enable [Y/N] = Y? NVRAM Boot List (GEV.fw-boot-path) Boot at power-up only [Y/N] = Y? NVRAM Boot List (GEV.fw-boot-path) Boot Abort Delay = 5? Auto Boot Enable [Y/N] = Y? Auto Boot at power-up only [Y/N] = Y? Auto Boot Scan Enable [Y/N] = Y? Auto Boot Scan Device Type List = FDISK/CDROM/TAPE/HDISK/? Auto Boot Controller LUN = 14? Auto Boot Device LUN = 40? Auto Boot Partition Number = 03? Auto Boot Abort Delay = 7? Auto Boot Default String [NULL for an empty string] = ? ROM Boot Enable [Y/N] = N? ROM Boot at power-up only [Y/N] = Y? ROM Boot Abort Delay = 5? ROM Boot Direct Starting Address = FFF00000? ROM Boot Direct Ending Address = FFFFFFFC? Network Auto Boot Enable [Y/N] = N? Network Auto Boot at power-up only [Y/N] = N? Network Auto Boot Controller LUN = 00? Network Auto Boot Device LUN = 00? Network Auto Boot Abort Delay = 5? Network Auto Boot Configuration Parameters Offset (NVRAM) = 00001000? Memory Size Enable [Y/N] = Y? Memory Size Starting Address = 00000000? Memory Size Ending Address = 02000000? DRAM Speed in NANO Seconds = 60? ROM First Access Length (0 - 31) = 10? ROM Next Access Length (0 - 15) = 0? DRAM Parity Enable [On-Detection/Always/Never - O/A/N] = O? L2Cache Parity Enable [On-Detection/Always/Never - O/A/N] = O? PCI Interrupts Route Control Registers (PIRQ0/1/2/3) = 0A050000? Serial Startup Code Master Enable [Y/N] = N? Serial Startup Code LF Enable [Y/N] = N? ---------------------NIOT --------------------------- PPC1-Bug>niot Controller LUN =00? Device LUN =00? Node Control Memory Address =03F9E000? Client IP Address =194.2.81.157? Server IP Address =194.2.81.241? Subnet IP Address Mask =255.255.255.0? Broadcast IP Address =255.255.255.255? Gateway IP Address =194.2.81.254? Boot File Name ("NULL" for None) =debug-ppc? Argument File Name ("NULL" for None) =? Boot File Load Address =001F0000? Boot File Execution Address =001F0000? Boot File Execution Delay =00000000? Boot File Length =00000000? Boot File Byte Offset =00000000? BOOTP/RARP Request Retry =05? TFTP/ARP Request Retry =05? Trace Character Buffer Address =00000000? BOOTP/RARP Request Control: Always/When-Needed (A/W)=W? BOOTP/RARP Reply Update Control: Yes/No (Y/N) =Y? --------------------------------------------------------