/* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */

/* If defined, then the BSP Framework will put a non-zero pattern into the
   RTEMS Workspace and C program heap. This should assist in finding code that
   assumes memory starts set to zero. */
#undef BSP_DIRTY_MEMORY

/* If defined, print a message and wait until pressed before resetting board
   when application exits. */
#undef BSP_PRESS_KEY_FOR_RESET

/* If defined, reset the board when the application exits. */
#undef BSP_RESET_BOARD_AT_EXIT

/* disable testsuite samples with high memory demands */
#undef BSP_SMALL_MEMORY

/* reset vector address for BSP start */
#undef BSP_START_RESET_VECTOR

/* CPU clock in Hz */
#undef LPC24XX_CCLK

/* configuration for console (UART 0) */
#undef LPC24XX_CONFIG_CONSOLE

/* configuration for I2C 0 */
#undef LPC24XX_CONFIG_I2C_0

/* configuration for I2C 1 */
#undef LPC24XX_CONFIG_I2C_1

/* configuration for I2C 2 */
#undef LPC24XX_CONFIG_I2C_2

/* configuration for UART 1 */
#undef LPC24XX_CONFIG_UART_1

/* configuration for UART 2 */
#undef LPC24XX_CONFIG_UART_2

/* configuration for UART 3 */
#undef LPC24XX_CONFIG_UART_3

/* clock divider for EMCCLK (EMCCLK = CCLK / EMCCLKDIV) */
#undef LPC24XX_EMCCLKDIV

/* enable ISSI IS42S32800B configuration for EMC */
#undef LPC24XX_EMC_IS42S32800B

/* enable ISSI IS42S32800D7 configuration for EMC */
#undef LPC24XX_EMC_IS42S32800D7

/* enable M29W160E configuration for EMC */
#undef LPC24XX_EMC_M29W160E

/* enable M29W320E70 configuration for EMC */
#undef LPC24XX_EMC_M29W320E70

/* enable Micron MT48LC4M16A2 configuration for EMC */
#undef LPC24XX_EMC_MT48LC4M16A2

/* enable SST39VF3201 configuration for EMC */
#undef LPC24XX_EMC_SST39VF3201

/* enable tests for EMC */
#undef LPC24XX_EMC_TEST

/* enable Winbond W9825G2JB75I configuration for EMC */
#undef LPC24XX_EMC_W9825G2JB75I

/* enable RMII for Ethernet */
#undef LPC24XX_ETHERNET_RMII

/* enable heap extend by Ethernet and USB regions */
#undef LPC24XX_HEAP_EXTEND

/* main oscillator frequency in Hz */
#undef LPC24XX_OSCILLATOR_MAIN

/* RTC oscillator frequency in Hz */
#undef LPC24XX_OSCILLATOR_RTC

/* clock divider for default PCLK (PCLK = CCLK / PCLKDIV) */
#undef LPC24XX_PCLKDIV

/* stop Ethernet controller at start-up to avoid DMA interference */
#undef LPC24XX_STOP_ETHERNET

/* stop general purpose DMA at start-up to avoid DMA interference */
#undef LPC24XX_STOP_GPDMA

/* stop USB controller at start-up to avoid DMA interference */
#undef LPC24XX_STOP_USB

/* baud for UARTs */
#undef LPC24XX_UART_BAUD

/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT

/* Define to the full name of this package. */
#undef PACKAGE_NAME

/* Define to the full name and version of this package. */
#undef PACKAGE_STRING

/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME

/* Define to the home page for this package. */
#undef PACKAGE_URL

/* Define to the version of this package. */
#undef PACKAGE_VERSION