/*- * Copyright (c) 2014 Ian Lepore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: head/sys/arm/freescale/imx/imx_iomux.c 321938 2017-08-02 18:28:06Z ian $ */ /* * Pin mux and pad control driver for imx5 and imx6. * * This driver implements the fdt_pinctrl interface for configuring the gpio and * peripheral pins based on fdt configuration data. * * When the driver attaches, it walks the entire fdt tree and automatically * configures the pins for each device which has a pinctrl-0 property and whose * status is "okay". In addition it implements the fdt_pinctrl_configure() * method which any other driver can call at any time to reconfigure its pins. * * The nature of the fsl,pins property in fdt data makes this driver's job very * easy. Instead of representing each pin and pad configuration using symbolic * properties such as pullup-enable="true" and so on, the data simply contains * the addresses of the registers that control the pins, and the raw values to * store in those registers. * * The imx5 and imx6 SoCs also have a small number of "general purpose * registers" in the iomuxc device which are used to control an assortment * of completely unrelated aspects of SoC behavior. This driver provides other * drivers with direct access to those registers via simple accessor functions. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct iomux_softc { device_t dev; struct resource *mem_res; u_int last_gpregaddr; }; static struct iomux_softc *iomux_sc; static struct ofw_compat_data compat_data[] = { {"fsl,imx6dl-iomuxc", true}, {"fsl,imx6q-iomuxc", true}, {"fsl,imx6sl-iomuxc", true}, {"fsl,imx6ul-iomuxc", true}, {"fsl,imx6sx-iomuxc", true}, {"fsl,imx53-iomuxc", true}, {"fsl,imx51-iomuxc", true}, {NULL, false}, }; /* * Each tuple in an fsl,pins property contains these fields. */ struct pincfg { uint32_t mux_reg; uint32_t padconf_reg; uint32_t input_reg; uint32_t mux_val; uint32_t input_val; uint32_t padconf_val; }; #define PADCONF_NONE (1U << 31) /* Do not configure pad. */ #define PADCONF_SION (1U << 30) /* Force SION bit in mux register. */ #define PADMUX_SION (1U << 4) /* The SION bit in the mux register. */ static inline uint32_t RD4(struct iomux_softc *sc, bus_size_t off) { return (bus_read_4(sc->mem_res, off)); } static inline void WR4(struct iomux_softc *sc, bus_size_t off, uint32_t val) { bus_write_4(sc->mem_res, off, val); } static void iomux_configure_input(struct iomux_softc *sc, uint32_t reg, uint32_t val) { u_int select, mask, shift, width; /* If register and value are zero, there is nothing to configure. */ if (reg == 0 && val == 0) return; /* * If the config value has 0xff in the high byte it is encoded: * 31 23 15 7 0 * | 0xff | shift | width | select | * We need to mask out the old select value and OR in the new, using a * mask of the given width and shifting the values up by shift. */ if ((val & 0xff000000) == 0xff000000) { select = val & 0x000000ff; width = (val & 0x0000ff00) >> 8; shift = (val & 0x00ff0000) >> 16; mask = ((1u << width) - 1) << shift; val = (RD4(sc, reg) & ~mask) | (select << shift); } WR4(sc, reg, val); } static int iomux_configure_pins(device_t dev, phandle_t cfgxref) { struct iomux_softc *sc; struct pincfg *cfgtuples, *cfg; phandle_t cfgnode; int i, ntuples; uint32_t sion; sc = device_get_softc(dev); cfgnode = OF_node_from_xref(cfgxref); ntuples = OF_getencprop_alloc(cfgnode, "fsl,pins", sizeof(*cfgtuples), (void **)&cfgtuples); if (ntuples < 0) return (ENOENT); if (ntuples == 0) return (0); /* Empty property is not an error. */ for (i = 0, cfg = cfgtuples; i < ntuples; i++, cfg++) { sion = (cfg->padconf_val & PADCONF_SION) ? PADMUX_SION : 0; WR4(sc, cfg->mux_reg, cfg->mux_val | sion); iomux_configure_input(sc, cfg->input_reg, cfg->input_val); if ((cfg->padconf_val & PADCONF_NONE) == 0) WR4(sc, cfg->padconf_reg, cfg->padconf_val); if (bootverbose) { char name[32]; OF_getprop(cfgnode, "name", &name, sizeof(name)); printf("%16s: muxreg 0x%04x muxval 0x%02x " "inpreg 0x%04x inpval 0x%02x " "padreg 0x%04x padval 0x%08x\n", name, cfg->mux_reg, cfg->mux_val | sion, cfg->input_reg, cfg->input_val, cfg->padconf_reg, cfg->padconf_val); } } OF_prop_free(cfgtuples); return (0); } static int iomux_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data) return (ENXIO); device_set_desc(dev, "Freescale i.MX pin configuration"); return (BUS_PROBE_DEFAULT); } static int iomux_detach(device_t dev) { /* This device is always present. */ return (EBUSY); } static int iomux_attach(device_t dev) { struct iomux_softc * sc; int rid; sc = device_get_softc(dev); sc->dev = dev; switch (imx_soc_type()) { case IMXSOC_51: sc->last_gpregaddr = 1 * sizeof(uint32_t); break; case IMXSOC_53: sc->last_gpregaddr = 2 * sizeof(uint32_t); break; case IMXSOC_6DL: case IMXSOC_6S: case IMXSOC_6SL: case IMXSOC_6Q: sc->last_gpregaddr = 13 * sizeof(uint32_t); break; case IMXSOC_6UL: sc->last_gpregaddr = 14 * sizeof(uint32_t); break; default: device_printf(dev, "Unknown SoC type\n"); return (ENXIO); } rid = 0; sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->mem_res == NULL) { device_printf(dev, "Cannot allocate memory resources\n"); return (ENXIO); } iomux_sc = sc; /* * Register as a pinctrl device, and call the convenience function that * walks the entire device tree invoking FDT_PINCTRL_CONFIGURE() on any * pinctrl-0 property cells whose xref phandle refers to a configuration * that is a child node of our node in the tree. * * The pinctrl bindings documentation specifically mentions that the * pinctrl device itself may have a pinctrl-0 property which contains * static configuration to be applied at device init time. The tree * walk will automatically handle this for us when it passes through our * node in the tree. */ fdt_pinctrl_register(dev, "fsl,pins"); fdt_pinctrl_configure_tree(dev); return (0); } uint32_t imx_iomux_gpr_get(u_int regaddr) { struct iomux_softc * sc; sc = iomux_sc; KASSERT(sc != NULL, ("%s called before attach", __FUNCTION__)); KASSERT(regaddr >= 0 && regaddr <= sc->last_gpregaddr, ("%s bad regaddr %u, max %u", __FUNCTION__, regaddr, sc->last_gpregaddr)); return (RD4(iomux_sc, regaddr)); } void imx_iomux_gpr_set(u_int regaddr, uint32_t val) { struct iomux_softc * sc; sc = iomux_sc; KASSERT(sc != NULL, ("%s called before attach", __FUNCTION__)); KASSERT(regaddr >= 0 && regaddr <= sc->last_gpregaddr, ("%s bad regaddr %u, max %u", __FUNCTION__, regaddr, sc->last_gpregaddr)); WR4(iomux_sc, regaddr, val); } void imx_iomux_gpr_set_masked(u_int regaddr, uint32_t clrbits, uint32_t setbits) { struct iomux_softc * sc; uint32_t val; sc = iomux_sc; KASSERT(sc != NULL, ("%s called before attach", __FUNCTION__)); KASSERT(regaddr >= 0 && regaddr <= sc->last_gpregaddr, ("%s bad regaddr %u, max %u", __FUNCTION__, regaddr, sc->last_gpregaddr)); val = RD4(iomux_sc, regaddr * 4); val = (val & ~clrbits) | setbits; WR4(iomux_sc, regaddr, val); } static device_method_t imx_iomux_methods[] = { /* Device interface */ DEVMETHOD(device_probe, iomux_probe), DEVMETHOD(device_attach, iomux_attach), DEVMETHOD(device_detach, iomux_detach), /* fdt_pinctrl interface */ DEVMETHOD(fdt_pinctrl_configure,iomux_configure_pins), DEVMETHOD_END }; static driver_t imx_iomux_driver = { "imx_iomux", imx_iomux_methods, sizeof(struct iomux_softc), }; static devclass_t imx_iomux_devclass; EARLY_DRIVER_MODULE(imx_iomux, simplebus, imx_iomux_driver, imx_iomux_devclass, 0, 0, BUS_PASS_CPU + BUS_PASS_ORDER_LATE);