/*
 * Cirrus EP7312 Startup code
 *
 * Copyright (c) 2002 by Jay Monkman <jtm@smoothsmoothie.com>
 *
 * Copyright (c) 2002 by Charlie Steader <charlies@poliac.com>
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *
 *  http://www.rtems.com/license/LICENSE.
 *
 *
 *  $Id$
*/


/* Some standard definitions...*/

.equ Mode_USR,        	     0x10
.equ Mode_FIQ,        	     0x11
.equ Mode_IRQ,        	     0x12
.equ Mode_SVC,        	     0x13
.equ Mode_ABT,        	     0x17
.equ Mode_ABORT,             0x17
.equ Mode_UNDEF,      	     0x1B
.equ Mode_SYS,        	     0x1F /*only available on ARM Arch. v4*/

.equ I_Bit,           	     0x80
.equ F_Bit,           	     0x40


	.text
	.globl	_start


_start:
	/* store the sp */
	mov	r12, sp
/*
 * Here is the code to initialize the low-level BSP environment
 * (Chip Select, PLL, ....?)
 */

/* zero the bss */
        LDR     r1, =_bss_end_       /* get end of ZI region */
        LDR     r0, =_bss_start_     /* load base address of ZI region */

zi_init:
        MOV     r2, #0
        CMP     r0, r1		       /* loop whilst r0 < r1 */
        STRLOT   r2, [r0], #4
        BLO     zi_init

/* Load basic ARM7 interrupt table */
VectorInit:
	MOV	R0, #0
	ADR	R1, Vector_Init_Block
	LDMIA	R1!, {R2, r3}	/* Copy the Vectors (8 words) */
	STMIA	R0!, {r2, r3}
	LDMIA	R1!, {R2, r3}	/* Copy the Vectors (8 words) */
	STMIA	R0!, {r2, r3}
	LDMIA	R1!, {R2, r3}	/* Copy the Vectors (8 words) */
	STMIA	R0!, {r2, r3}
	LDMIA	R1!, {R2, r3}	/* Copy the Vectors (8 words) */
	STMIA	R0!, {r2, r3}

	LDMIA	R1!, {R2, r3}	/* Copy the .long'ed addresses (8 words) */
	STMIA	R0!, {r2, r3}
	LDMIA	R1!, {R2, r3}	/* Copy the .long'ed addresses (8 words) */
	STMIA	R0!, {r2, r3}
	LDMIA	R1!, {R2, r3}	/* Copy the .long'ed addresses (8 words) */
	STMIA	R0!, {r2, r3}
	LDMIA	R1!, {R2, r3}	/* Copy the .long'ed addresses (8 words) */
	STMIA	R0!, {r2, r3}

	B	init2

/*******************************************************
 standard exception vectors table
 *** Must be located at address 0
********************************************************/

Vector_Init_Block:
	LDR	PC, Reset_Addr
	LDR	PC, Undefined_Addr
	LDR	PC, SWI_Addr
	LDR	PC, Prefetch_Addr
	LDR	PC, Abort_Addr
	NOP
	LDR	PC, IRQ_Addr
	LDR	PC, FIQ_Addr

	.globl Reset_Addr
Reset_Addr:	.long   _start
Undefined_Addr:	.long	Undefined_Handler
SWI_Addr:	.long	SWI_Handler
Prefetch_Addr:	.long	Prefetch_Handler
Abort_Addr:	.long	Abort_Handler
		.long	0
IRQ_Addr:	.long	IRQ_Handler
FIQ_Addr:	.long	FIQ_Handler

/* The following handlers do not do anything useful */
	.globl Undefined_Handler
Undefined_Handler:
        B       Undefined_Handler
	.globl SWI_Handler
SWI_Handler:
        B       SWI_Handler
	.globl Prefetch_Handler
Prefetch_Handler:
        B       Prefetch_Handler
	.globl Abort_Handler
Abort_Handler:
        B       Abort_Handler
	.globl IRQ_Handler
IRQ_Handler:
        B       IRQ_Handler
	.globl FIQ_Handler
FIQ_Handler:
        B       FIQ_Handler

init2 :
/* --- Initialise stack pointer registers */

/* Enter IRQ mode and set up the IRQ stack pointer */
    MOV     r0, #Mode_IRQ | I_Bit | F_Bit     /* No interrupts */
    MSR     cpsr, r0
    ldr	    r1, =_irq_stack_size
    LDR     sp, =_irq_stack
    add	    sp, sp, r1
    sub     sp, sp, #0x64

/* Enter FIQ mode and set up the FIQ stack pointer */
    MOV     r0, #Mode_FIQ | I_Bit | F_Bit     /* No interrupts */
    MSR     cpsr, r0
    ldr	    r1, =_fiq_stack_size
    LDR     sp, =_fiq_stack
    add	    sp, sp, r1
    sub     sp, sp, #0x64

/* Enter ABT mode and set up the ABT stack pointer */
    MOV     r0, #Mode_ABT | I_Bit | F_Bit     /* No interrupts */
    MSR     cpsr, r0
    ldr	    r1, =_abt_stack_size
    LDR     sp, =_abt_stack
    add	    sp, sp, r1
    sub     sp, sp, #0x64

/* Set up the SVC stack pointer last and stay in SVC mode */
    MOV     r0, #Mode_SVC | I_Bit | F_Bit     /* No interrupts */
    MSR     cpsr, r0
    ldr	    r1, =_svc_stack_size
    LDR     sp, =_svc_stack
    add	    sp, sp, r1
    sub     sp, sp, #0x64

	/* save the original registers */
	stmdb	sp!, {r4-r12, lr}

/* --- Now we enter the C code */

    bl	boot_card

	ldmia	sp!, {r4-r12, lr}
	mov	sp, r12
	mov	pc, lr