/* ---------------------------------------------------------------------------- */
/*                  Atmel Microcontroller Software Support                      */
/*                       SAM Software Package License                           */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) 2015, Atmel Corporation                                        */
/*                                                                              */
/* All rights reserved.                                                         */
/*                                                                              */
/* Redistribution and use in source and binary forms, with or without           */
/* modification, are permitted provided that the following condition is met:    */
/*                                                                              */
/* - Redistributions of source code must retain the above copyright notice,     */
/* this list of conditions and the disclaimer below.                            */
/*                                                                              */
/* Atmel's name may not be used to endorse or promote products derived from     */
/* this software without specific prior written permission.                     */
/*                                                                              */
/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
/* ---------------------------------------------------------------------------- */

/** \addtogroup rtng_module Working with RTNG
 * \ingroup peripherals_module
 * The TRNG driver provides the interface to configure and use the TRNG
 * peripheral.\n
 *
 * The True Random Number Generator (TRNG) passes the American NIST Special
 * Publication 800-22 and Diehard Random Tests Suites. As soon as the TRNG is
 * enabled (TRNG_Enable()),  the generator provides one 32-bit value every 84
 * clock cycles.  Interrupt trng_int can be enabled through TRNG_EnableIt()
 * (respectively disabled in TRNG_IDR).
 * This interrupt is set when a new random value is available and is cleared
 * when the status  register is read (TRNG_SR register). The flag DATRDY of
 * the status register (TRNG_ISR) is set when the random data is ready to be
 * read out on the 32-bit output data through TRNG_GetRandData().
 *
 * For more accurate information, please look at the SHA section of the
 * Datasheet.
 *
 * Related files :\n
 * \ref trng.c\n
 * \ref trng.h\n
 */
/*@{*/
/*@}*/

/**
 * \file
 *
 * Implementation of True Random Number Generator (TRNG)
 *
 */

/*----------------------------------------------------------------------------
 *        Headers
 *----------------------------------------------------------------------------*/

#include "chip.h"

/*----------------------------------------------------------------------------
 *        Exported functions
 *----------------------------------------------------------------------------*/

/**
 * \brief Enables the TRNG to provide Random Values.
 * \param key  This key is to be written when the ENABLE bit is set.
 */
void TRNG_Enable(void)
{
	TRNG->TRNG_CR = TRNG_CR_ENABLE | TRNG_CR_KEY_PASSWD;
}

/**
 * \brief Disables the TRNG to provide Random Values.
 * \param key  This key is to be written when the DISABLE bit is set.
 */
void TRNG_Disable(void)
{
	TRNG->TRNG_CR = TRNG_CR_KEY_PASSWD;
}

/**
 * \brief Data Ready Interrupt enable.
 */
void TRNG_EnableIt(void)
{
	TRNG->TRNG_IER = TRNG_IER_DATRDY;
}

/**
 * \brief Data Ready Interrupt Disable.
 */
void TRNG_DisableIt(void)
{
	TRNG->TRNG_IDR = TRNG_IDR_DATRDY;
}

/**
 * \brief Get the current status register of the given TRNG peripheral.
 * \return  TRNG status register.
 */
uint32_t TRNG_GetStatus(void)
{
	return TRNG->TRNG_ISR;
}

/**
 * \brief Get the  32-bit Output Data from TRNG peripheral.
 * \return  TRNG output data.
 */
uint32_t TRNG_GetRandData(void)
{
	return TRNG->TRNG_ODATA;
}