OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc") OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ MEMORY { VECTORS : ORIGIN = 0x0 , LENGTH = 0x3000 CODE : ORIGIN = 0x3000 , LENGTH = 32M - 0x3000 } /* * The upper layer linker command file may optionally define the symbol * bsp_section_small_data_area_size. By default, the small data area is * defined by the .sdata and .sbss input sections. Define * bsp_section_small_data_area_size, if you want to make space available for * dynamically loaded libraries (libdl). Small memory targets which do not use * libdl, should not define this symbol. */ SECTIONS { .entry_point_section : { KEEP(*(.entry_point_section)) } > VECTORS /* * This section is used only if NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL * is defined in vectors/vectors.S */ .vectors : { *(.vectors) } > VECTORS /* Read-only sections, merged into text segment: */ .interp : { *(.interp) } > CODE .hash : { *(.hash) } > CODE .dynsym : { *(.dynsym) } > CODE .dynstr : { *(.dynstr) } > CODE .gnu.version : { *(.gnu.version) } > CODE .gnu.version_d : { *(.gnu.version_d) } > CODE .gnu.version_r : { *(.gnu.version_r) } > CODE .rela.text : { *(.rela.text) *(.rela.gnu.linkonce.t*) } > CODE .rela.data : { *(.rela.data) *(.rela.gnu.linkonce.d*) } > CODE .rela.rodata : { *(.rela.rodata*) *(.rela.gnu.linkonce.r*) } > CODE .rela.got : { *(.rela.got) } > CODE .rela.got1 : { *(.rela.got1) } > CODE .rela.got2 : { *(.rela.got2) } > CODE .rela.ctors : { *(.rela.ctors) } > CODE .rela.dtors : { *(.rela.dtors) } > CODE .rela.init : { *(.rela.init) } > CODE .rela.fini : { *(.rela.fini) } > CODE .rela.bss : { *(.rela.bss) } > CODE .rela.plt : { *(.rela.plt) } > CODE .rela.sdata : { *(.rela.sdata) } > CODE .rela.sbss : { *(.rela.sbss) } > CODE .rela.sdata2 : { *(.rela.sdata2) } > CODE .rela.sbss2 : { *(.rela.sbss2) } > CODE .rela.dyn : { *(.rela.dyn) } > CODE .init : { KEEP(*(.init)) } > CODE .text : { *(.text*) /* * Special FreeBSD sysctl sections. */ . = ALIGN (16); __start_set_sysctl_set = .; *(set_sysctl_*); __stop_set_sysctl_set = ABSOLUTE(.); *(set_domain_*); *(set_pseudo_*); /* .gnu.warning sections are handled specially by elf32.em. */ *(.gnu.warning) *(.gnu.linkonce.t*) } > CODE .fini : { _fini = .; KEEP(*(.fini)) } > CODE .rodata : { *(.rodata*) KEEP (*(SORT(.rtemsroset.*))) *(.gnu.linkonce.r*) } > CODE .rodata1 : { *(.rodata1) } > CODE .tdata : { _TLS_Data_begin = .; *(.tdata .tdata.* .gnu.linkonce.td.*) _TLS_Data_end = .; } >CODE .tbss : { _TLS_BSS_begin = .; *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) _TLS_BSS_end = .; } >CODE _TLS_Data_size = _TLS_Data_end - _TLS_Data_begin; _TLS_Data_begin = _TLS_Data_size != 0 ? _TLS_Data_begin : _TLS_BSS_begin; _TLS_Data_end = _TLS_Data_size != 0 ? _TLS_Data_end : _TLS_BSS_begin; _TLS_BSS_size = _TLS_BSS_end - _TLS_BSS_begin; _TLS_Size = _TLS_BSS_end - _TLS_Data_begin; _TLS_Alignment = MAX (ALIGNOF (.tdata), ALIGNOF (.tbss)); /* Adjust the address for the data segment. We want to adjust up to the same address within the page on the next page up. */ . = ALIGN(0x10000) + (. & (0x10000 - 1)); /* Ensure the __preinit_array_start label is properly aligned. We could instead move the label definition inside the section, but the linker would then create the section even if it turns out to be empty, which isn't pretty. */ . = ALIGN(32 / 8); PROVIDE (__preinit_array_start = .); .preinit_array : { *(.preinit_array) } >CODE PROVIDE (__preinit_array_end = .); PROVIDE (__init_array_start = .); .init_array : { *(.init_array) } >CODE PROVIDE (__init_array_end = .); PROVIDE (__fini_array_start = .); .fini_array : { *(.fini_array) } >CODE PROVIDE (__fini_array_end = .); .sdata2 : {PROVIDE (_SDA2_BASE_ = 32768); *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) } >CODE .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) /* avoid empty sdata2/sbss2 area -- __eabi would not set up r2 * which may be important if run-time loading is used */ . += 1; PROVIDE (__SBSS2_END__ = .); } >CODE .eh_frame_hdr : { *(.eh_frame_hdr) } >CODE .eh_frame : { KEEP (*(.eh_frame)) } >CODE /* NOTE: if the BSP uses page tables, the correctness of * '_etext' (and __DATA_START__) is CRUCIAL - otherwise, * an invalid mapping may result!!! */ _etext = .; PROVIDE (etext = .); /* Adjust the address for the data segment. We want to adjust up to the same address within the page on the next page up. It would be more correct to do this: . = ALIGN(0x40000) + (ALIGN(8) & (0x40000 - 1)); The current expression does not correctly handle the case of a text segment ending precisely at the end of a page; it causes the data segment to skip a page. The above expression does not have this problem, but it will currently (2/95) cause BFD to allocate a single segment, combining both text and data, for this case. This will prevent the text segment from being shared among multiple executions of the program; I think that is more important than losing a page of the virtual address space (note that no actual memory is lost; the page which is skipped can not be referenced). */ . = ALIGN(0x1000); .data ALIGN(0x1000) : { /* NOTE: if the BSP uses page tables, the correctness of * '__DATA_START__' (and _etext) is CRUCIAL - otherwise, * an invalid mapping may result!!! */ PROVIDE(__DATA_START__ = ABSOLUTE(.) ); *(.data .data.* .gnu.linkonce.d*) KEEP (*(SORT(.rtemsrwset.*))) SORT(CONSTRUCTORS) } > CODE .data1 : { *(.data1) } > CODE PROVIDE (__EXCEPT_START__ = .); .gcc_except_table : { *(.gcc_except_table .gcc_except_table.*) } > CODE PROVIDE (__EXCEPT_END__ = .); .got1 : { *(.got1) } > CODE /* Put .ctors and .dtors next to the .got2 section, so that the pointers get relocated with -mrelocatable. Also put in the .fixup pointers. The current compiler no longer needs this, but keep it around for 2.7.2 */ PROVIDE (_GOT2_START_ = .); .got2 : { *(.got2) } > CODE .dynamic : { *(.dynamic) } > CODE .ctors : { KEEP (*ecrti.o(.ctors)) KEEP (*crtbegin.o(.ctors)) KEEP (*crtbegin?.o(.ctors)) KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o *ecrtn.o) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) } > CODE .dtors : { KEEP (*ecrti.o(.dtors)) KEEP (*crtbegin.o(.dtors)) KEEP (*crtbegin?.o(.dtors)) KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o *ecrtn.o) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) } > CODE PROVIDE (_FIXUP_START_ = .); .fixup : { *(.fixup) } > CODE PROVIDE (_FIXUP_END_ = .); PROVIDE (_GOT2_END_ = .); PROVIDE (_GOT_START_ = .); .got : { *(.got) } > CODE .got.plt : { *(.got.plt) } > CODE PROVIDE (_GOT_END_ = .); .jcr : { KEEP (*(.jcr)) } > CODE /* We want the small data sections together, so single-instruction offsets can access them all, and initialized data all before uninitialized, so we can shorten the on-disk segment size. */ .sdata : { bsp_section_sdata_begin = .; PROVIDE (_SDA_BASE_ = 32768); *(.sdata*) *(.gnu.linkonce.s.*) bsp_section_sdata_end = .; } > CODE _edata = .; PROVIDE (edata = .); .sbss : { bsp_section_sbss_begin = .; PROVIDE (__sbss_start = .); *(.dynsbss) *(.sbss* .gnu.linkonce.sb.*) *(.scommon) /* avoid empty sdata/sbss area -- __eabi would not set up r13 * which may be important if run-time loading is used */ . += 1; PROVIDE (__SBSS_END__ = .); PROVIDE (__sbss_end = .); bsp_section_sbss_end = .; bsp_section_sdata_libdl_begin = .; . = DEFINED(bsp_section_small_data_area_size) ? bsp_section_sdata_begin + bsp_section_small_data_area_size : .; bsp_section_sdata_libdl_end = .; } > CODE .plt : { *(.plt) } > CODE .bss : { PROVIDE (__bss_start = .); *(.dynbss) *(.bss .bss* .gnu.linkonce.b*) *(COMMON) . = ALIGN(16); PROVIDE (__bss_end = .); } > CODE .rtemsstack (NOLOAD) : { *(SORT(.rtemsstack.*)) } >CODE . = ALIGN(16); _end = . ; __rtems_end = . ; PROVIDE (end = .); /DISCARD/ : { *(.comment) } /* Stabs debugging sections. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } .stab.excl 0 : { *(.stab.excl) } .stab.exclstr 0 : { *(.stab.exclstr) } .stab.index 0 : { *(.stab.index) } .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } /* DWARF debug sections. Symbols in the DWARF debugging sections are relative to the beginning of the section so we begin them at 0. */ /* DWARF 1 */ .debug 0 : { *(.debug) } .line 0 : { *(.line) } /* GNU DWARF 1 extensions */ .debug_srcinfo 0 : { *(.debug_srcinfo) } .debug_sfnames 0 : { *(.debug_sfnames) } /* DWARF 1.1 and DWARF 2 */ .debug_aranges 0 : { *(.debug_aranges) } .debug_pubnames 0 : { *(.debug_pubnames) } /* DWARF 2 */ .debug_info 0 : { *(.debug_info) } .debug_abbrev 0 : { *(.debug_abbrev) } .debug_line 0 : { *(.debug_line) } .debug_frame 0 : { *(.debug_frame) } .debug_str 0 : { *(.debug_str) } .debug_loc 0 : { *(.debug_loc) } .debug_macinfo 0 : { *(.debug_macinfo) } /* SGI/MIPS DWARF 2 extensions */ .debug_weaknames 0 : { *(.debug_weaknames) } .debug_funcnames 0 : { *(.debug_funcnames) } .debug_typenames 0 : { *(.debug_typenames) } .debug_varnames 0 : { *(.debug_varnames) } /* These must appear regardless of . */ }