/*
 * RTEMS support for MPC83xx
 *
 * This file contains the MPC83xx SPI driver declarations.
 * NOTE: This driver has the same API as a I2C driver.
 */

/*
 * Copyright (c) 2007 embedded brains GmbH. All rights reserved.
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rtems.org/license/LICENSE.
 */

#ifndef _MPC83XX_SPIDRV_H
#define _MPC83XX_SPIDRV_H

#include <mpc83xx/mpc83xx.h>
#include <rtems/libi2c.h>
#include <rtems/irq.h>

#ifdef __cplusplus
extern "C" {
#endif

typedef struct mpc83xx_spi_softc {
  m83xxSPIRegisters_t *reg_ptr;
  int                  initialized;
  rtems_irq_number     irq_number;
  uint32_t             base_frq;    /* input frq for baud rate divider */
  rtems_id             irq_sema_id;
  uint32_t             curr_addr; /* current spi address */
  uint32_t             idle_char;
  uint8_t              bytes_per_char;
  uint8_t              bit_shift;
} mpc83xx_spi_softc_t ;

typedef struct {
  rtems_libi2c_bus_t  bus_desc;
  mpc83xx_spi_softc_t softc;
} mpc83xx_spi_desc_t;

/*=========================================================================*\
| Function:                                                                 |
\*-------------------------------------------------------------------------*/
rtems_status_code mpc83xx_spi_init
(
/*-------------------------------------------------------------------------*\
| Purpose:                                                                  |
|   initialize the driver                                                   |
+---------------------------------------------------------------------------+
| Input Parameters:                                                         |
\*-------------------------------------------------------------------------*/
 rtems_libi2c_bus_t *bh                  /* bus specifier structure        */
 );
/*-------------------------------------------------------------------------*\
| Return Value:                                                             |
|    o = ok or error code                                                   |
\*=========================================================================*/

/*=========================================================================*\
| Function:                                                                 |
\*-------------------------------------------------------------------------*/
int mpc83xx_spi_read_write_bytes
(
/*-------------------------------------------------------------------------*\
| Purpose:                                                                  |
|   transmit/receive some bytes from SPI device                             |
+---------------------------------------------------------------------------+
| Input Parameters:                                                         |
\*-------------------------------------------------------------------------*/
 rtems_libi2c_bus_t *bh,                 /* bus specifier structure        */
 unsigned char *rbuf,                    /* buffer to store bytes          */
 const unsigned char *tbuf,              /* buffer to send  bytes          */
 int len                                 /* number of bytes to transceive  */
 );
/*-------------------------------------------------------------------------*\
| Return Value:                                                             |
|    number of bytes received or (negative) error code                      |
\*=========================================================================*/

/*=========================================================================*\
| Function:                                                                 |
\*-------------------------------------------------------------------------*/
int mpc83xx_spi_read_bytes
(
/*-------------------------------------------------------------------------*\
| Purpose:                                                                  |
|   receive some bytes from SPI device                                      |
+---------------------------------------------------------------------------+
| Input Parameters:                                                         |
\*-------------------------------------------------------------------------*/
 rtems_libi2c_bus_t *bh,                 /* bus specifier structure        */
 unsigned char *buf,                     /* buffer to store bytes          */
 int len                                 /* number of bytes to receive     */
 );
/*-------------------------------------------------------------------------*\
| Return Value:                                                             |
|    number of bytes received or (negative) error code                      |
\*=========================================================================*/

/*=========================================================================*\
| Function:                                                                 |
\*-------------------------------------------------------------------------*/
int mpc83xx_spi_write_bytes
(
/*-------------------------------------------------------------------------*\
| Purpose:                                                                  |
|   send some bytes to SPI device                                           |
+---------------------------------------------------------------------------+
| Input Parameters:                                                         |
\*-------------------------------------------------------------------------*/
 rtems_libi2c_bus_t *bh,                 /* bus specifier structure        */
 unsigned char *buf,                     /* buffer to send                 */
 int len                                 /* number of bytes to send        */

 );
/*-------------------------------------------------------------------------*\
| Return Value:                                                             |
|    number of bytes sent or (negative) error code                          |
\*=========================================================================*/

/*=========================================================================*\
| Function:                                                                 |
\*-------------------------------------------------------------------------*/
rtems_status_code mpc83xx_spi_set_tfr_mode
(
/*-------------------------------------------------------------------------*\
| Purpose:                                                                  |
|   set SPI to desired baudrate/clock mode/character mode                   |
+---------------------------------------------------------------------------+
| Input Parameters:                                                         |
\*-------------------------------------------------------------------------*/
 rtems_libi2c_bus_t *bh,                 /* bus specifier structure        */
 const rtems_libi2c_tfr_mode_t *tfr_mode /* transfer mode info             */
 );
/*-------------------------------------------------------------------------*\
| Return Value:                                                             |
|    rtems_status_code                                                      |
\*=========================================================================*/

/*=========================================================================*\
| Function:                                                                 |
\*-------------------------------------------------------------------------*/
int mpc83xx_spi_ioctl
(
/*-------------------------------------------------------------------------*\
| Purpose:                                                                  |
|   perform selected ioctl function for SPI                                 |
+---------------------------------------------------------------------------+
| Input Parameters:                                                         |
\*-------------------------------------------------------------------------*/
 rtems_libi2c_bus_t *bh,                 /* bus specifier structure        */
 int                 cmd,                /* ioctl command code             */
 void               *arg                 /* additional argument array      */
 );
/*-------------------------------------------------------------------------*\
| Return Value:                                                             |
|    rtems_status_code                                                      |
\*=========================================================================*/

#ifdef __cplusplus
}
#endif


#endif /* _MPC83XX_I2CDRV_H */