/******************************************************************************
* Copyright (c) 2009 - 2021 Xilinx, Inc.  All rights reserved.
* SPDX-License-Identifier: MIT
******************************************************************************/

/*****************************************************************************/
/**
*
* @file xil_cache.h
*
* @addtogroup microblaze_cache_apis Microblaze Cache APIs
* @{
*
*
* The xil_cache.h file contains cache related driver functions (or macros)
* that can be used to access the device.  The user should refer to the
* hardware device specification for more details of the device operation.
* The functions in this header file can be used across all Xilinx supported
* processors.
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver   Who  Date     Changes
* ----- ---- -------- -------------------------------------------------------
* 1.00  hbm  07/28/09 Initial release
* 3.02a sdm  10/24/11 Updated the file to include xparameters.h so that
*                     the correct cache flush routines are used based on
*                     whether the write-back or write-through caches are
*                     used (cr #630532).
* 3.10a asa  05/04/13 This version of MicroBlaze BSP adds support for system
*					  cache/L2 cache. The existing/old APIs/macros in this
*					  file are renamed to imply that they deal with L1 cache.
*					  New macros/APIs are added to address similar features for
*					  L2 cache. Users can include this file in their application
*					  to use the various cache related APIs. These changes are
*					  done for implementing PR #697214.
*
* </pre>
*
*
******************************************************************************/

#ifndef XIL_CACHE_H
#define XIL_CACHE_H

#if defined XENV_VXWORKS
/* VxWorks environment */
#error "Unknown processor / architecture. Must be PPC for VxWorks."
#else
/* standalone environment */

#include "mb_interface.h"
#include "xil_types.h"
#include "xparameters.h"

#ifdef __cplusplus
extern "C" {
#endif

/****************************************************************************/
/**
*
* @brief    Invalidate the entire L1 data cache. If the cacheline is modified
*            (dirty), the modified contents are lost.
*
*
* @return   None.
*
* @note		Processor must be in real mode.
****************************************************************************/
#define Xil_L1DCacheInvalidate() microblaze_invalidate_dcache()

/****************************************************************************/
/**
*
* @brief    Invalidate the entire L2 data cache. If the cacheline is modified
*           (dirty),the modified contents are lost.
*
* @return   None.
*
* @note		Processor must be in real mode.
****************************************************************************/
#define Xil_L2CacheInvalidate() microblaze_invalidate_cache_ext()

/****************************************************************************/
/**
*
* @brief    Invalidate the L1 data cache for the given address range.
*           If the bytes specified by the address (Addr) are cached by the L1
*           data cache, the cacheline containing that byte is invalidated.If
*           the cacheline is modified (dirty), the modified contents are lost.
*
* @param    Addr is address of range to be invalidated.
* @param    Len is the length in bytes to be invalidated.
*
* @return   None.
*
* @note     Processor must be in real mode.
****************************************************************************/
#define Xil_L1DCacheInvalidateRange(Addr, Len) \
			microblaze_invalidate_dcache_range((Addr), (Len))

/****************************************************************************/
/**
*
* @brief    Invalidate the L1 data cache for the given address range.
*           If the bytes specified by the address (Addr) are cached by the
*           L1 data cache, the cacheline containing that byte is invalidated.
*           If the cacheline is modified (dirty), the modified contents are lost.
*
* @param    Addr: address of range to be invalidated.
* @param    Len: length in bytes to be invalidated.
*
* @return   None.
*
* @note     Processor must be in real mode.
****************************************************************************/
#define Xil_L2CacheInvalidateRange(Addr, Len) \
		microblaze_invalidate_cache_ext_range((Addr), (Len))

/****************************************************************************/
/**
* @brief   Flush the L1 data cache for the given address range.
*          If the bytes specified by the address (Addr) are cached by the
*          data cache, and is modified (dirty), the cacheline will be written
*          to system memory.The cacheline will also be invalidated.
*
* @param    Addr: the starting address of the range to be flushed.
* @param    Len: length in byte to be flushed.
*
* @return   None.
*
****************************************************************************/
#if (XPAR_MICROBLAZE_DCACHE_USE_WRITEBACK == 1)
#   define Xil_L1DCacheFlushRange(Addr, Len) \
		microblaze_flush_dcache_range((Addr), (Len))
#else
#   define Xil_L1DCacheFlushRange(Addr, Len) \
		microblaze_invalidate_dcache_range((Addr), (Len))
#endif /* XPAR_MICROBLAZE_DCACHE_USE_WRITEBACK */

/****************************************************************************/
/**
* @brief    Flush the L2 data cache for the given address range.
*           If the bytes specified by the address (Addr) are cached by the
*           data cache, and is modified (dirty), the cacheline will be
*           written to system memory. The cacheline will also be invalidated.
*
* @param   Addr: the starting address of the range to be flushed.
* @param   Len: length in byte to be flushed.
*
* @return   None.
*
****************************************************************************/
#define Xil_L2CacheFlushRange(Addr, Len) \
		microblaze_flush_cache_ext_range((Addr), (Len))

/****************************************************************************/
/**
* @brief    Flush the entire L1 data cache. If any cacheline is dirty, the
*           cacheline will be written to system memory. The entire data cache
*           will be invalidated.
*
* @return   None.
*
****************************************************************************/
#if (XPAR_MICROBLAZE_DCACHE_USE_WRITEBACK == 1)
#   define Xil_L1DCacheFlush() microblaze_flush_dcache()
#else
#   define Xil_L1DCacheFlush() microblaze_invalidate_dcache()
#endif /* XPAR_MICROBLAZE_DCACHE_USE_WRITEBACK */

/****************************************************************************/
/**
* @brief    Flush the entire L2 data cache. If any cacheline is dirty, the
*           cacheline will be written to system memory. The entire data cache
*           will be invalidated.
*
* @return   None.
*
****************************************************************************/
#define Xil_L2CacheFlush() microblaze_flush_cache_ext()

/****************************************************************************/
/**
*
* @brief    Invalidate the instruction cache for the given address range.
*
* @param    Addr is address of ragne to be invalidated.
* @param    Len is the length in bytes to be invalidated.
*
* @return   None.
*
****************************************************************************/
#define Xil_L1ICacheInvalidateRange(Addr, Len) \
			microblaze_invalidate_icache_range((Addr), (Len))

/****************************************************************************/
/**
*
* @brief    Invalidate the entire instruction cache.
*
* @return   None.
*
****************************************************************************/
#define Xil_L1ICacheInvalidate() \
			microblaze_invalidate_icache()


/****************************************************************************/
/**
*
* @brief    Enable the L1 data cache.
*
* @return   None.
*
* @note     This is processor specific.
*
****************************************************************************/
#define Xil_L1DCacheEnable() \
			microblaze_enable_dcache()

/****************************************************************************/
/**
*
* @brief    Disable the L1 data cache.
*
* @return   None.
*
* @note     This is processor specific.
*
****************************************************************************/
#define Xil_L1DCacheDisable() \
			microblaze_disable_dcache()

/****************************************************************************/
/**
*
* @brief    Enable the instruction cache.
*
* @return   None.
*
* @note     This is processor specific.
*
****************************************************************************/
#define Xil_L1ICacheEnable() \
			microblaze_enable_icache()

/****************************************************************************/
/**
*
* @brief    Disable the L1 Instruction cache.
*
* @return   None.
*
* @note     This is processor specific.
*
****************************************************************************/
#define Xil_L1ICacheDisable() \
			microblaze_disable_icache()

/****************************************************************************/
/**
*
* @brief    Enable the data cache.
*
* @return   None.
*
****************************************************************************/
#define Xil_DCacheEnable() Xil_L1DCacheEnable()

/****************************************************************************/
/**
*
* @brief    Enable the instruction cache.
*
* @return   None.
*
*
****************************************************************************/
#define Xil_ICacheEnable() Xil_L1ICacheEnable()

/****************************************************************************/
/**
*
* @brief    Invalidate the entire Data cache.
*
* @return	None.
*
****************************************************************************/
#define Xil_DCacheInvalidate() \
	Xil_L2CacheInvalidate(); \
	Xil_L1DCacheInvalidate();


/****************************************************************************/
/**
*
* @brief    Invalidate the Data cache for the given address range.
*           If the bytes specified by the address (adr) are cached by the
*           Data cache, the cacheline containing that byte is invalidated.
*           If the cacheline is modified (dirty), the modified contents are
*           lost and are NOT written to system memory before the line is
*           invalidated.
*
* @param	Addr: Start address of range to be invalidated.
* @param	Len: Length of range to be invalidated in bytes.
*
* @return	None.
*
****************************************************************************/
#define Xil_DCacheInvalidateRange(Addr, Len) \
	Xil_L2CacheInvalidateRange((Addr), (Len)); \
	Xil_L1DCacheInvalidateRange((Addr), (Len));


/****************************************************************************/
/**
*
* @brief    Flush the entire Data cache.
*
* @return	None.
*
****************************************************************************/
#define Xil_DCacheFlush() \
	Xil_L2CacheFlush(); \
	Xil_L1DCacheFlush();

/****************************************************************************/
/**
* @brief     Flush the Data cache for the given address range.
*            If the bytes specified by the address (adr) are cached by the
*            Data cache, the cacheline containing that byte is invalidated.
*            If the cacheline is modified (dirty), the written to system
*            memory first before the before the line is invalidated.
*
* @param	Addr: Start address of range to be flushed.
* @param	Len: Length of range to be flushed in bytes.
*
* @return	None.
*
****************************************************************************/
#define Xil_DCacheFlushRange(Addr, Len) \
	Xil_L2CacheFlushRange((Addr), (Len)); \
	Xil_L1DCacheFlushRange((Addr), (Len));


/****************************************************************************/
/**
* @brief    Invalidate the entire instruction cache.
*
* @return	None.
*
****************************************************************************/
#define Xil_ICacheInvalidate() \
	Xil_L2CacheInvalidate(); \
	Xil_L1ICacheInvalidate();


/****************************************************************************/
/**
* @brief     Invalidate the instruction cache for the given address range.
*            If the bytes specified by the address (adr) are cached by the
*            Data cache, the cacheline containing that byte is invalidated.
*            If the cacheline is modified (dirty), the modified contents are
*            lost and are NOT written to system memory before the line is
*            invalidated.
*
* @param	Addr: Start address of ragne to be invalidated.
* @param	Len: Length of range to be invalidated in bytes.
*
* @return	None.
*
****************************************************************************/
#define Xil_ICacheInvalidateRange(Addr, Len) \
	Xil_L2CacheInvalidateRange((Addr), (Len)); \
	Xil_L1ICacheInvalidateRange((Addr), (Len));

void Xil_DCacheDisable(void);
void Xil_ICacheDisable(void);

#ifdef __cplusplus
}
#endif

#endif

#endif
/**
* @} End of "addtogroup microblaze_cache_apis".
*/