/** * @file * * @ingroup raspberrypi_reg * * @brief Register definitions. */ /* * Copyright (c) 2014-2015 Andre Marques * Copyright (c) 2013 Alan Cudmore. * Copyright (c) 2015 Yang Qiao * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * * http://www.rtems.org/license/LICENSE * */ #ifndef LIBBSP_ARM_RASPBERRYPI_RASPBERRYPI_H #define LIBBSP_ARM_RASPBERRYPI_RASPBERRYPI_H #include #include #include /** * @defgroup raspberrypi_reg Register Definitions * * @ingroup RTEMSBSPsARMRaspberryPi * * @brief Register Definitions * * @{ */ /** * @name Register Macros * * @{ */ #define BCM2835_REG(x) (*(volatile uint32_t *)(x)) #define BCM2835_BIT(n) (1 << (n)) /** @} */ /** * @name Peripheral Base Register Address * * @{ */ #if (BSP_IS_RPI2 == 1) #define RPI_PERIPHERAL_BASE 0x3F000000 #else #define RPI_PERIPHERAL_BASE 0x20000000 #endif #define RPI_PERIPHERAL_SIZE 0x01000000 /** * @name Internal ARM Timer Registers * * @{ */ #define BCM2835_CLOCK_FREQ 250000000 #define BCM2835_TIMER_BASE (RPI_PERIPHERAL_BASE + 0xB400) #define BCM2835_TIMER_LOD (BCM2835_TIMER_BASE + 0x00) #define BCM2835_TIMER_VAL (BCM2835_TIMER_BASE + 0x04) #define BCM2835_TIMER_CTL (BCM2835_TIMER_BASE + 0x08) #define BCM2835_TIMER_CLI (BCM2835_TIMER_BASE + 0x0C) #define BCM2835_TIMER_RIS (BCM2835_TIMER_BASE + 0x10) #define BCM2835_TIMER_MIS (BCM2835_TIMER_BASE + 0x14) #define BCM2835_TIMER_RLD (BCM2835_TIMER_BASE + 0x18) #define BCM2835_TIMER_DIV (BCM2835_TIMER_BASE + 0x1C) #define BCM2835_TIMER_CNT (BCM2835_TIMER_BASE + 0x20) #define BCM2835_TIMER_PRESCALE 0xF9 /** @} */ /** * @name Power Management and Watchdog Registers * * @{ */ #define BCM2835_PM_PASSWD_MAGIC 0x5a000000 #define BCM2835_PM_BASE (RPI_PERIPHERAL_BASE + 0x100000) #define BCM2835_PM_GNRIC (BCM2835_PM_BASE + 0x00) #define BCM2835_PM_GNRIC_POWUP 0x00000001 #define BCM2835_PM_GNRIC_POWOK 0x00000002 #define BCM2835_PM_GNRIC_ISPOW 0x00000004 #define BCM2835_PM_GNRIC_MEMREP 0x00000008 #define BCM2835_PM_GNRIC_MRDONE 0x00000010 #define BCM2835_PM_GNRIC_ISFUNC 0x00000020 #define BCM2835_PM_GNRIC_RSTN 0x00000fc0 #define BCM2835_PM_GNRIC_ENAB 0x00001000 #define BCM2835_PM_GNRIC_CFG 0x007f0000 #define BCM2835_PM_AUDIO (BCM2835_PM_BASE + 0x04) #define BCM2835_PM_AUDIO_APSM 0x000fffff #define BCM2835_PM_AUDIO_CTRLEN 0x00100000 #define BCM2835_PM_AUDIO_RSTN 0x00200000 #define BCM2835_PM_STATUS (BCM2835_PM_BASE + 0x18) #define BCM2835_PM_RSTC (BCM2835_PM_BASE + 0x1c) #define BCM2835_PM_RSTC_DRCFG 0x00000003 #define BCM2835_PM_RSTC_WRCFG 0x00000030 #define BCM2835_PM_RSTC_WRCFG_FULL 0x00000020 #define BCM2835_PM_RSTC_SRCFG 0x00000300 #define BCM2835_PM_RSTC_QRCFG 0x00003000 #define BCM2835_PM_RSTC_FRCFG 0x00030000 #define BCM2835_PM_RSTC_HRCFG 0x00300000 #define BCM2835_PM_RSTS (BCM2835_PM_BASE + 0x20) #define BCM2835_PM_RSTS_HADDRQ 0x00000001 #define BCM2835_PM_RSTS_HADDRF 0x00000002 #define BCM2835_PM_RSTS_HADDRH 0x00000004 #define BCM2835_PM_RSTS_HADWRQ 0x00000010 #define BCM2835_PM_RSTS_HADWRF 0x00000020 #define BCM2835_PM_RSTS_HADWRH 0x00000040 #define BCM2835_PM_RSTS_HADSRQ 0x00000100 #define BCM2835_PM_RSTS_HADSRF 0x00000200 #define BCM2835_PM_RSTS_HADSRH 0x00000400 #define BCM2835_PM_RSTS_HADPOR 0x00001000 #define BCM2835_PM_WDOG (BCM2835_PM_BASE + 0x24) /** @} */ /** * @name GPIO Registers * * @{ */ #define BCM2835_GPIO_REGS_BASE (RPI_PERIPHERAL_BASE + 0x200000) #define BCM2835_GPIO_GPFSEL1 (BCM2835_GPIO_REGS_BASE + 0x04) #define BCM2835_GPIO_GPSET0 (BCM2835_GPIO_REGS_BASE + 0x1C) #define BCM2835_GPIO_GPCLR0 (BCM2835_GPIO_REGS_BASE + 0x28) #define BCM2835_GPIO_GPLEV0 (BCM2835_GPIO_REGS_BASE + 0x34) #define BCM2835_GPIO_GPEDS0 (BCM2835_GPIO_REGS_BASE + 0x40) #define BCM2835_GPIO_GPREN0 (BCM2835_GPIO_REGS_BASE + 0x4C) #define BCM2835_GPIO_GPFEN0 (BCM2835_GPIO_REGS_BASE + 0x58) #define BCM2835_GPIO_GPHEN0 (BCM2835_GPIO_REGS_BASE + 0x64) #define BCM2835_GPIO_GPLEN0 (BCM2835_GPIO_REGS_BASE + 0x70) #define BCM2835_GPIO_GPAREN0 (BCM2835_GPIO_REGS_BASE + 0x7C) #define BCM2835_GPIO_GPAFEN0 (BCM2835_GPIO_REGS_BASE + 0x88) #define BCM2835_GPIO_GPPUD (BCM2835_GPIO_REGS_BASE + 0x94) #define BCM2835_GPIO_GPPUDCLK0 (BCM2835_GPIO_REGS_BASE + 0x98) /** @} */ /** * @name AUX Registers * * @{ */ #define BCM2835_AUX_BASE (RPI_PERIPHERAL_BASE + 0x215000) #define AUX_ENABLES (BCM2835_AUX_BASE + 0x04) #define AUX_MU_IO_REG (BCM2835_AUX_BASE + 0x40) #define AUX_MU_IER_REG (BCM2835_AUX_BASE + 0x44) #define AUX_MU_IIR_REG (BCM2835_AUX_BASE + 0x48) #define AUX_MU_LCR_REG (BCM2835_AUX_BASE + 0x4C) #define AUX_MU_MCR_REG (BCM2835_AUX_BASE + 0x50) #define AUX_MU_LSR_REG (BCM2835_AUX_BASE + 0x54) #define AUX_MU_MSR_REG (BCM2835_AUX_BASE + 0x58) #define AUX_MU_SCRATCH (BCM2835_AUX_BASE + 0x5C) #define AUX_MU_CNTL_REG (BCM2835_AUX_BASE + 0x60) #define AUX_MU_STAT_REG (BCM2835_AUX_BASE + 0x64) #define AUX_MU_BAUD_REG (BCM2835_AUX_BASE + 0x68) /** @} */ /** * @name UART 0 (PL011) Registers * * @{ */ #define BCM2835_UART0_BASE (RPI_PERIPHERAL_BASE + 0x201000) #define BCM2835_UART0_DR (BCM2835_UART0_BASE + 0x00) #define BCM2835_UART0_RSRECR (BCM2835_UART0_BASE + 0x04) #define BCM2835_UART0_FR (BCM2835_UART0_BASE + 0x18) #define BCM2835_UART0_ILPR (BCM2835_UART0_BASE + 0x20) #define BCM2835_UART0_IBRD (BCM2835_UART0_BASE + 0x24) #define BCM2835_UART0_FBRD (BCM2835_UART0_BASE + 0x28) #define BCM2835_UART0_LCRH (BCM2835_UART0_BASE + 0x2C) #define BCM2835_UART0_CR (BCM2835_UART0_BASE + 0x30) #define BCM2835_UART0_IFLS (BCM2835_UART0_BASE + 0x34) #define BCM2835_UART0_IMSC (BCM2835_UART0_BASE + 0x38) #define BCM2835_UART0_RIS (BCM2835_UART0_BASE + 0x3C) #define BCM2835_UART0_MIS (BCM2835_UART0_BASE + 0x40) #define BCM2835_UART0_ICR (BCM2835_UART0_BASE + 0x44) #define BCM2835_UART0_DMACR (BCM2835_UART0_BASE + 0x48) #define BCM2835_UART0_ITCR (BCM2835_UART0_BASE + 0x80) #define BCM2835_UART0_ITIP (BCM2835_UART0_BASE + 0x84) #define BCM2835_UART0_ITOP (BCM2835_UART0_BASE + 0x88) #define BCM2835_UART0_TDR (BCM2835_UART0_BASE + 0x8C) #define BCM2835_UART0_MIS_RX 0x10 #define BCM2835_UART0_MIS_TX 0x20 #define BCM2835_UART0_IMSC_RX 0x10 #define BCM2835_UART0_IMSC_TX 0x20 #define BCM2835_UART0_FR_RXFE 0x10 #define BCM2835_UART0_FR_TXFF 0x20 #define BCM2835_UART0_ICR_RX 0x10 #define BCM2835_UART0_ICR_TX 0x20 /** @} */ /** * @name I2C (BSC) Registers * * @{ */ #define BCM2835_I2C_BASE (RPI_PERIPHERAL_BASE + 0x804000) #define BCM2835_I2C_C (BCM2835_I2C_BASE + 0x00) #define BCM2835_I2C_S (BCM2835_I2C_BASE + 0x04) #define BCM2835_I2C_DLEN (BCM2835_I2C_BASE + 0x08) #define BCM2835_I2C_A (BCM2835_I2C_BASE + 0x0C) #define BCM2835_I2C_FIFO (BCM2835_I2C_BASE + 0x10) #define BCM2835_I2C_DIV (BCM2835_I2C_BASE + 0x14) #define BCM2835_I2C_DEL (BCM2835_I2C_BASE + 0x18) #define BCM2835_I2C_CLKT (BCM2835_I2C_BASE + 0x1C) /** @} */ /** * @name SPI Registers * * @{ */ #define BCM2835_SPI_BASE (RPI_PERIPHERAL_BASE + 0x204000) #define BCM2835_SPI_CS (BCM2835_SPI_BASE + 0x00) #define BCM2835_SPI_FIFO (BCM2835_SPI_BASE + 0x04) #define BCM2835_SPI_CLK (BCM2835_SPI_BASE + 0x08) #define BCM2835_SPI_DLEN (BCM2835_SPI_BASE + 0x0C) #define BCM2835_SPI_LTOH (BCM2835_SPI_BASE + 0x10) #define BCM2835_SPI_DC (BCM2835_SPI_BASE + 0x14) /** @} */ /** * @name I2C/SPI slave BSC Registers * * @{ */ #define BCM2835_I2C_SPI_BASE (RPI_PERIPHERAL_BASE + 0x214000) #define BCM2835_I2C_SPI_DR (BCM2835_I2C_SPI_BASE + 0x00) #define BCM2835_I2C_SPI_RSR (BCM2835_I2C_SPI_BASE + 0x04) #define BCM2835_I2C_SPI_SLV (BCM2835_I2C_SPI_BASE + 0x08) #define BCM2835_I2C_SPI_CR (BCM2835_I2C_SPI_BASE + 0x0C) #define BCM2835_I2C_SPI_FR (BCM2835_I2C_SPI_BASE + 0x10) #define BCM2835_I2C_SPI_IFLS (BCM2835_I2C_SPI_BASE + 0x14) #define BCM2835_I2C_SPI_IMSC (BCM2835_I2C_SPI_BASE + 0x18) #define BCM2835_I2C_SPI_RIS (BCM2835_I2C_SPI_BASE + 0x1C) #define BCM2835_I2C_SPI_MIS (BCM2835_I2C_SPI_BASE + 0x20) #define BCM2835_I2C_SPI_ICR (BCM2835_I2C_SPI_BASE + 0x24) #define BCM2835_I2C_SPI_DMACR (BCM2835_I2C_SPI_BASE + 0x28) #define BCM2835_I2C_SPI_TDR (BCM2835_I2C_SPI_BASE + 0x2C) #define BCM2835_I2C_SPI_GPUSTAT (BCM2835_I2C_SPI_BASE + 0x30) #define BCM2835_I2C_SPI_HCTRL (BCM2835_I2C_SPI_BASE + 0x34) /** @} */ /** * @name IRQ Registers * * @{ */ #define BCM2835_BASE_INTC (RPI_PERIPHERAL_BASE + 0xB200) #define BCM2835_IRQ_BASIC (BCM2835_BASE_INTC + 0x00) #define BCM2835_IRQ_PENDING1 (BCM2835_BASE_INTC + 0x04) #define BCM2835_IRQ_PENDING2 (BCM2835_BASE_INTC + 0x08) #define BCM2835_IRQ_FIQ_CTRL (BCM2835_BASE_INTC + 0x0C) #define BCM2835_IRQ_ENABLE1 (BCM2835_BASE_INTC + 0x10) #define BCM2835_IRQ_ENABLE2 (BCM2835_BASE_INTC + 0x14) #define BCM2835_IRQ_ENABLE_BASIC (BCM2835_BASE_INTC + 0x18) #define BCM2835_IRQ_DISABLE1 (BCM2835_BASE_INTC + 0x1C) #define BCM2835_IRQ_DISABLE2 (BCM2835_BASE_INTC + 0x20) #define BCM2835_IRQ_DISABLE_BASIC (BCM2835_BASE_INTC + 0x24) /** @} */ /** * @name GPU Timer Registers * * @{ */ /** * NOTE: The GPU uses Compare registers 0 and 2 for * it's own RTOS. 1 and 3 are available for use in * RTEMS. */ #define BCM2835_GPU_TIMER_BASE (RPI_PERIPHERAL_BASE + 0x3000) #define BCM2835_GPU_TIMER_CS (BCM2835_GPU_TIMER_BASE + 0x00) #define BCM2835_GPU_TIMER_CS_M0 0x00000001 #define BCM2835_GPU_TIMER_CS_M1 0x00000002 #define BCM2835_GPU_TIMER_CS_M2 0x00000004 #define BCM2835_GPU_TIMER_CS_M3 0x00000008 #define BCM2835_GPU_TIMER_CLO (BCM2835_GPU_TIMER_BASE + 0x04) #define BCM2835_GPU_TIMER_CHI (BCM2835_GPU_TIMER_BASE + 0x08) #define BCM2835_GPU_TIMER_C0 (BCM2835_GPU_TIMER_BASE + 0x0C) #define BCM2835_GPU_TIMER_C1 (BCM2835_GPU_TIMER_BASE + 0x10) #define BCM2835_GPU_TIMER_C2 (BCM2835_GPU_TIMER_BASE + 0x14) #define BCM2835_GPU_TIMER_C3 (BCM2835_GPU_TIMER_BASE + 0x18) /** @} */ /** * @name EMMC Registers * * @{ */ /** * NOTE: Since the SD controller follows the SDHCI standard, * the rtems-libbsd tree already provides the remaining registers. */ #define BCM2835_EMMC_BASE (RPI_PERIPHERAL_BASE + 0x300000) /** @} */ /** * @name Mailbox Registers * * @{ */ #define BCM2835_MBOX_BASE (RPI_PERIPHERAL_BASE+0xB880) #define BCM2835_MBOX_PEEK (BCM2835_MBOX_BASE+0x10) #define BCM2835_MBOX_READ (BCM2835_MBOX_BASE+0x00) #define BCM2835_MBOX_WRITE (BCM2835_MBOX_BASE+0x20) #define BCM2835_MBOX_STATUS (BCM2835_MBOX_BASE+0x18) #define BCM2835_MBOX_SENDER (BCM2835_MBOX_BASE+0x14) #define BCM2835_MBOX_CONFIG (BCM2835_MBOX_BASE+0x1C) #define BCM2835_MBOX_FULL 0x80000000 #define BCM2835_MBOX_EMPTY 0x40000000 /** @} */ /** * @name Mailbox Channels * * @{ */ /* Power Manager channel */ #define BCM2835_MBOX_CHANNEL_PM 0 /* Framebuffer channel */ #define BCM2835_MBOX_CHANNEL_FB 1 /* Virtual UART channel */ #define BCM2835_MBOX_CHANNEL_VUART 2 /* VCHIQ channel */ #define BCM2835_MBOX_CHANNEL_VCHIQ 3 /* LEDs channel */ #define BCM2835_MBOX_CHANNEL_LED 4 /* Button channel */ #define BCM2835_MBOX_CHANNEL_BUTTON 5 /* Touch screen channel */ #define BCM2835_MBOX_CHANNEL_TOUCHS 6 /* Property tags (ARM <-> VC) channel */ #define BCM2835_MBOX_CHANNEL_PROP_AVC 8 /* Property tags (VC <-> ARM) channel */ #define BCM2835_MBOX_CHANNEL_PROP_VCA 9 /** @} */ /** * @name USB Registers * * @{ */ #define BCM2835_USB_BASE (RPI_PERIPHERAL_BASE + 0x980000) /* DTC_OTG USB controller */ /** @} */ /** * @name Raspberry Pi 2 CPU Cores Local Peripherals * * @{ */ #define BCM2836_CORE_LOCAL_PERIPH_BASE 0x40000000 #define BCM2836_CORE_LOCAL_PERIPH_SIZE 0x00040000 /** @} */ /** * @name Raspberry Pi 2 Mailbox Register Defines * * @{ */ #define BCM2836_MAILBOX_0_WRITE_SET_BASE 0x40000080 #define BCM2836_MAILBOX_1_WRITE_SET_BASE 0x40000084 #define BCM2836_MAILBOX_2_WRITE_SET_BASE 0x40000088 #define BCM2836_MAILBOX_3_WRITE_SET_BASE 0x4000008C #define BCM2836_MAILBOX_0_READ_CLEAR_BASE 0x400000C0 #define BCM2836_MAILBOX_1_READ_CLEAR_BASE 0x400000C4 #define BCM2836_MAILBOX_2_READ_CLEAR_BASE 0x400000C8 #define BCM2836_MAILBOX_3_READ_CLEAR_BASE 0x400000CC /** @} */ /** * @name Raspberry Pi 2 Core Timer * * @{ */ #define BCM2836_CORE_TIMER_CTRL 0x40000000 #define BCM2836_CORE_TIMER_CTRL_APB_CLK 0x00000100 #define BCM2836_CORE_TIMER_CTRL_INC_2 0x00000200 #define BCM2836_CORE_TIMER_PRESCALER 0x40000008 #define BCM2836_CORE_TIMER_LS32 0x4000001C #define BCM2836_CORE_TIMER_MS32 0x40000020 /** @} */ /** * @name Raspberry Pi 2 Local Timer * * @{ */ #define BCM2836_LOCAL_TIMER_CTRL 0x40000034 #define BCM2836_LOCAL_TIMER_CTRL_IRQ_FLAG 0x80000000 #define BCM2836_LOCAL_TIMER_CTRL_IRQ_EN 0x20000000 #define BCM2836_LOCAL_TIMER_CTRL_TIMER_EN 0x10000000 #define BCM2836_LOCAL_TIMER_RELOAD 0x0FFFFFFF #define BCM2836_LOCAL_TIMER_IRQ_RELOAD 0x40000038 #define BCM2836_LOCAL_TIMER_IRQ_CLEAR 0x80000000 #define BCM2836_LOCAL_TIMER_RELOAD_NOW 0x40000000 #define BCM2836_LOCAL_TIMER_IRQ_ROUTING 0x40000024 #define BCM2836_LOCAL_TIMER_ROU_CORE0_IRQ 0x00 #define BCM2836_LOCAL_TIMER_ROU_CORE1_IRQ 0x01 #define BCM2836_LOCAL_TIMER_ROU_CORE2_IRQ 0x02 #define BCM2836_LOCAL_TIMER_ROU_CORE3_IRQ 0x03 #define BCM2836_LOCAL_TIMER_ROU_CORE0_FIQ 0x04 #define BCM2836_LOCAL_TIMER_ROU_CORE1_FIQ 0x05 #define BCM2836_LOCAL_TIMER_ROU_CORE2_FIQ 0x06 #define BCM2836_LOCAL_TIMER_ROU_CORE3_FIQ 0x07 /** @} */ /** * @name Raspberry Pi 2 IRQ Routing * * @{ */ #define BCM2836_GPU_IRQ_ROUTING 0x4000000C #define BCM2836_GPU_IRQ_ROU_GPU_IRQ_CORE0 0x00000000 #define BCM2836_GPU_IRQ_ROU_GPU_IRQ_CORE1 0x00000001 #define BCM2836_GPU_IRQ_ROU_GPU_IRQ_CORE2 0x00000002 #define BCM2836_GPU_IRQ_ROU_GPU_IRQ_CORE4 0x00000003 #define BCM2836_GPU_IRQ_ROU_GPU_FIQ_CORE0 0x00000000 #define BCM2836_GPU_IRQ_ROU_GPU_FIQ_CORE1 0x00000004 #define BCM2836_GPU_IRQ_ROU_GPU_FIQ_CORE2 0x00000008 #define BCM2836_GPU_IRQ_ROU_GPU_FIQ_CORE4 0x0000000C #define BCM2836_GPU_IRQ_ROU_GPU_FIQ_CORE4 0x0000000C /** @} */ /** * @name Raspberry Pi 2 Interrupt Register Defines * * @{ */ /* Timers interrupt control registers */ #define BCM2836_CORE0_TIMER_IRQ_CTRL_BASE 0x40000040 #define BCM2836_CORE1_TIMER_IRQ_CTRL_BASE 0x40000044 #define BCM2836_CORE2_TIMER_IRQ_CTRL_BASE 0x40000048 #define BCM2836_CORE3_TIMER_IRQ_CTRL_BASE 0x4000004C #define BCM2836_CORE_TIMER_IRQ_CTRL(cpuidx) \ (BCM2836_CORE0_TIMER_IRQ_CTRL_BASE + 0x4 * (cpuidx)) /* * Where to route timer interrupt to, IRQ/FIQ * Setting both the IRQ and FIQ bit gives an FIQ */ #define BCM2836_CORE_TIMER_IRQ_CTRL_TIMER0_IRQ 0x01 #define BCM2836_CORE_TIMER_IRQ_CTRL_TIMER1_IRQ 0x02 #define BCM2836_CORE_TIMER_IRQ_CTRL_TIMER2_IRQ 0x04 #define BCM2836_CORE_TIMER_IRQ_CTRL_TIMER3_IRQ 0x08 #define BCM2836_CORE_TIMER_IRQ_CTRL_TIMER0_FIQ 0x10 #define BCM2836_CORE_TIMER_IRQ_CTRL_TIMER1_FIQ 0x20 #define BCM2836_CORE_TIMER_IRQ_CTRL_TIMER2_FIQ 0x40 #define BCM2836_CORE_TIMER_IRQ_CTRL_TIMER3_FIQ 0x80 /* CPU mailbox registers */ #define BCM2836_MAILBOX_IRQ_CTRL_BASE 0x40000050 #define BCM2836_MAILBOX_IRQ_CTRL(cpuidx) \ (BCM2836_MAILBOX_IRQ_CTRL_BASE + 0x4 * (cpuidx)) /* * Where to route mailbox interrupt to, IRQ/FIQ * Setting both the IRQ and FIQ bit gives an FIQ */ #define BCM2836_MAILBOX_IRQ_CTRL_MBOX0_IRQ 0x01 #define BCM2836_MAILBOX_IRQ_CTRL_MBOX1_IRQ 0x02 #define BCM2836_MAILBOX_IRQ_CTRL_MBOX2_IRQ 0x04 #define BCM2836_MAILBOX_IRQ_CTRL_MBOX3_IRQ 0x08 #define BCM2836_MAILBOX_IRQ_CTRL_MBOX0_FIQ 0x10 #define BCM2836_MAILBOX_IRQ_CTRL_MBOX1_FIQ 0x20 #define BCM2836_MAILBOX_IRQ_CTRL_MBOX2_FIQ 0x40 #define BCM2836_MAILBOX_IRQ_CTRL_MBOX3_FIQ 0x80 #define BCM2836_IRQ_SOURCE_REG_BASE 0x40000060 #define BCM2836_IRQ_SOURCE_REG(cpuidx) \ (BCM2836_IRQ_SOURCE_REG_BASE + 0x4 * (cpuidx)) #define BCM2836_FIQ_SOURCE_REG_BASE 0x40000070 #define BCM2836_FIQ_SOURCE_REG(cpuidx) \ (BCM2836_FIQ_SOURCE_REG_BASE + 0x4 * (cpuidx)) #define BCM2836_IRQ_SOURCE_TIMER0 0x00000001 #define BCM2836_IRQ_SOURCE_TIMER1 0x00000002 #define BCM2836_IRQ_SOURCE_TIMER2 0x00000004 #define BCM2836_IRQ_SOURCE_TIMER3 0x00000008 #define BCM2836_IRQ_SOURCE_MBOX0 0x00000010 #define BCM2836_IRQ_SOURCE_MBOX1 0x00000020 #define BCM2836_IRQ_SOURCE_MBOX2 0x00000040 #define BCM2836_IRQ_SOURCE_MBOX3 0x00000080 #define BCM2836_IRQ_SOURCE_GPU 0x00000100 #define BCM2836_IRQ_SOURCE_PMU 0x00000200 #define BCM2836_IRQ_SOURCE_LOCAL_TIMER 0x00000800 /** @} */ #endif /* LIBBSP_ARM_RASPBERRYPI_RASPBERRYPI_H */