/* * Copyright 2017-2020 NXP * All rights reserved. * * * SPDX-License-Identifier: BSD-3-Clause */ #include "fsl_pxp.h" /******************************************************************************* * Definitions ******************************************************************************/ /* Component ID definition, used by tools. */ #ifndef FSL_COMPONENT_ID #define FSL_COMPONENT_ID "platform.drivers.pxp" #endif /* The CSC2 coefficient is ###.####_#### */ #define PXP_CSC2_COEF_INT_WIDTH 2 #define PXP_CSC2_COEF_FRAC_WIDTH 8 /* Compatibility map macro. */ #if defined(PXP_PS_CLRKEYLOW_0_PIXEL_MASK) && (!defined(PXP_PS_CLRKEYLOW_PIXEL_MASK)) #define PS_CLRKEYLOW PS_CLRKEYLOW_0 #define PS_CLRKEYHIGH PS_CLRKEYHIGH_0 #endif #if defined(PXP_AS_CLRKEYLOW_0_PIXEL_MASK) && (!defined(PXP_AS_CLRKEYLOW_PIXEL_MASK)) #define AS_CLRKEYLOW AS_CLRKEYLOW_0 #define AS_CLRKEYHIGH AS_CLRKEYHIGH_0 #endif #define PXP_MAX_HEIGHT ((PXP_OUT_LRC_Y_MASK >> PXP_OUT_LRC_Y_SHIFT) + 1U) typedef union _u32_f32 { float f32; uint32_t u32; } u32_f32_t; typedef union _pxp_pvoid_u32 { void *pvoid; uint32_t u32; } pxp_pvoid_u32_t; /******************************************************************************* * Prototypes ******************************************************************************/ /*! * @brief Get the instance from the base address * * @param base PXP peripheral base address * * @return The PXP module instance */ static uint32_t PXP_GetInstance(PXP_Type *base); #if !(defined(FSL_FEATURE_PXP_HAS_NO_CSC2) && FSL_FEATURE_PXP_HAS_NO_CSC2) /*! * @brief Convert IEEE 754 float value to the value could be written to registers. * * This function converts the float value to integer value to set the scaler * and CSC parameters. * * This function is an alternative implemention of the following code with no * MISRA 2004 rule 10.4 error: * * @code return (uint32_t)(floatValue * (float)(1 << fracBits)); @endcode * * @param floatValue The float value to convert. * @param intBits Bits number of integer part in result. * @param fracBits Bits number of fractional part in result. * @return The value to set to register. */ static uint32_t PXP_ConvertFloat(float floatValue, uint8_t intBits, uint8_t fracBits); #endif /*! * @brief Convert the desired scale fact to DEC and PS_SCALE. * * @param inputDimension Input dimension. * @param outputDimension Output dimension. * @param dec The decimation filter contr0l value. * @param scale The scale value set to register PS_SCALE. */ static void PXP_GetScalerParam(uint16_t inputDimension, uint16_t outputDimension, uint8_t *dec, uint32_t *scale); /*! * @brief Reset the PXP to initialized state. * * @param base PXP peripheral base address. */ static void PXP_ResetToInit(PXP_Type *base); /*! * @brief Copy rectangle. * * @param base PXP peripheral base address. * @param srcAddr Start address of the soruce rectangle. * @param srcPitchBytes Pitch of source buffer. * @param destAddr Start address of the destination rectangle. * @param destPitchBytes Pitch of destination buffer. * @param width How many pixels one line to copy. * @param height How many lines to copy. * @param pixelFormat Pixel format. */ static void PXP_StartRectCopy(PXP_Type *base, uint32_t srcAddr, uint16_t srcPitchBytes, uint32_t destAddr, uint16_t destPitchBytes, uint16_t width, uint16_t height, pxp_as_pixel_format_t pixelFormat); /******************************************************************************* * Variables ******************************************************************************/ /*! @brief Pointers to PXP bases for each instance. */ static PXP_Type *const s_pxpBases[] = PXP_BASE_PTRS; #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) /*! @brief Pointers to PXP clocks for each PXP submodule. */ static const clock_ip_name_t s_pxpClocks[] = PXP_CLOCKS; #endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ /******************************************************************************* * Code ******************************************************************************/ static uint32_t PXP_GetInstance(PXP_Type *base) { uint32_t instance; /* Find the instance index from base address mappings. */ for (instance = 0; instance < ARRAY_SIZE(s_pxpBases); instance++) { if (s_pxpBases[instance] == base) { break; } } assert(instance < ARRAY_SIZE(s_pxpBases)); return instance; } #if !(defined(FSL_FEATURE_PXP_HAS_NO_CSC2) && FSL_FEATURE_PXP_HAS_NO_CSC2) static uint32_t PXP_ConvertFloat(float floatValue, uint8_t intBits, uint8_t fracBits) { /* One bit reserved for sign bit. */ assert(intBits + fracBits < 32); u32_f32_t u32_f32; uint32_t ret; u32_f32.f32 = floatValue; uint32_t floatBits = u32_f32.u32; int32_t expValue = (int32_t)((floatBits & 0x7F800000U) >> 23U) - 127; ret = (floatBits & 0x007FFFFFU) | 0x00800000U; expValue += fracBits; if (expValue < 0) { return 0U; } else if (expValue > 23) { /* should not exceed 31-bit when left shift. */ assert((expValue - 23) <= 7); ret <<= (expValue - 23); } else { ret >>= (23 - expValue); } /* Set the sign bit. */ if (floatBits & 0x80000000U) { ret = ((~ret) + 1U) & ~(((uint32_t)-1) << (intBits + fracBits + 1)); } return ret; } #endif static void PXP_GetScalerParam(uint16_t inputDimension, uint16_t outputDimension, uint8_t *dec, uint32_t *scale) { uint32_t scaleFact = ((uint32_t)inputDimension << 12U) / outputDimension; if (scaleFact >= (16UL << 12U)) { /* Desired fact is two large, use the largest support value. */ *dec = 3U; *scale = 0x2000U; } else { if (scaleFact > (8UL << 12U)) { *dec = 3U; } else if (scaleFact > (4UL << 12U)) { *dec = 2U; } else if (scaleFact > (2UL << 12U)) { *dec = 1U; } else { *dec = 0U; } *scale = scaleFact >> (*dec); if (0U == *scale) { *scale = 1U; } } } static void PXP_ResetToInit(PXP_Type *base) { uint32_t ctrl = 0U; PXP_Reset(base); /* Enable the process engine in primary processing flow. */ #if defined(PXP_CTRL_ENABLE_ROTATE0_MASK) ctrl |= PXP_CTRL_ENABLE_ROTATE0_MASK; #endif #if defined(PXP_CTRL_ENABLE_ROTATE1_MASK) ctrl |= PXP_CTRL_ENABLE_ROTATE1_MASK; #endif #if defined(PXP_CTRL_ENABLE_CSC2_MASK) ctrl |= PXP_CTRL_ENABLE_CSC2_MASK; #endif #if defined(PXP_CTRL_ENABLE_LUT_MASK) ctrl |= PXP_CTRL_ENABLE_LUT_MASK; #endif #if defined(PXP_CTRL_ENABLE_PS_AS_OUT_MASK) ctrl |= PXP_CTRL_ENABLE_PS_AS_OUT_MASK; #endif base->CTRL = ctrl; } /*! * brief Initialize the PXP. * * This function enables the PXP peripheral clock, and resets the PXP registers * to default status. * * param base PXP peripheral base address. */ void PXP_Init(PXP_Type *base) { #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) uint32_t instance = PXP_GetInstance(base); CLOCK_EnableClock(s_pxpClocks[instance]); #endif PXP_ResetToInit(base); } /*! * brief De-initialize the PXP. * * This function disables the PXP peripheral clock. * * param base PXP peripheral base address. */ void PXP_Deinit(PXP_Type *base) { #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) uint32_t instance = PXP_GetInstance(base); CLOCK_DisableClock(s_pxpClocks[instance]); #endif } /*! * brief Reset the PXP. * * This function resets the PXP peripheral registers to default status. * * param base PXP peripheral base address. */ void PXP_Reset(PXP_Type *base) { base->CTRL_SET = PXP_CTRL_SFTRST_MASK; base->CTRL_CLR = (PXP_CTRL_SFTRST_MASK | PXP_CTRL_CLKGATE_MASK); } /*! * brief Set the alpha surface input buffer configuration. * * param base PXP peripheral base address. * param config Pointer to the configuration. */ void PXP_SetAlphaSurfaceBufferConfig(PXP_Type *base, const pxp_as_buffer_config_t *config) { assert(NULL != config); base->AS_CTRL = (base->AS_CTRL & ~PXP_AS_CTRL_FORMAT_MASK) | PXP_AS_CTRL_FORMAT(config->pixelFormat); base->AS_BUF = config->bufferAddr; base->AS_PITCH = config->pitchBytes; } /*! * brief Set the alpha surface blending configuration. * * param base PXP peripheral base address. * param config Pointer to the configuration structure. */ void PXP_SetAlphaSurfaceBlendConfig(PXP_Type *base, const pxp_as_blend_config_t *config) { assert(NULL != config); uint32_t reg; reg = base->AS_CTRL; reg &= ~(PXP_AS_CTRL_ALPHA0_INVERT_MASK | PXP_AS_CTRL_ROP_MASK | PXP_AS_CTRL_ALPHA_MASK | PXP_AS_CTRL_ALPHA_CTRL_MASK); reg |= (PXP_AS_CTRL_ROP(config->ropMode) | PXP_AS_CTRL_ALPHA(config->alpha) | PXP_AS_CTRL_ALPHA_CTRL(config->alphaMode)); if (config->invertAlpha) { reg |= PXP_AS_CTRL_ALPHA0_INVERT_MASK; } base->AS_CTRL = reg; } /*! * brief Set the alpha surface position in output buffer. * * param base PXP peripheral base address. * param upperLeftX X of the upper left corner. * param upperLeftY Y of the upper left corner. * param lowerRightX X of the lower right corner. * param lowerRightY Y of the lower right corner. */ void PXP_SetAlphaSurfacePosition( PXP_Type *base, uint16_t upperLeftX, uint16_t upperLeftY, uint16_t lowerRightX, uint16_t lowerRightY) { base->OUT_AS_ULC = PXP_OUT_AS_ULC_Y(upperLeftY) | PXP_OUT_AS_ULC_X(upperLeftX); base->OUT_AS_LRC = PXP_OUT_AS_LRC_Y(lowerRightY) | PXP_OUT_AS_LRC_X(lowerRightX); } /*! * brief Set the alpha surface overlay color key. * * If a pixel in the current overlay image with a color that falls in the range * from the p colorKeyLow to p colorKeyHigh range, it will use the process surface * pixel value for that location. If no PS image is present or if the PS image also * matches its colorkey range, the PS background color is used. * * param base PXP peripheral base address. * param colorKeyLow Color key low range. * param colorKeyHigh Color key high range. * * note Colorkey operations are higher priority than alpha or ROP operations */ void PXP_SetAlphaSurfaceOverlayColorKey(PXP_Type *base, uint32_t colorKeyLow, uint32_t colorKeyHigh) { base->AS_CLRKEYLOW = colorKeyLow; base->AS_CLRKEYHIGH = colorKeyHigh; } /*! * brief Set the process surface input buffer configuration. * * param base PXP peripheral base address. * param config Pointer to the configuration. */ void PXP_SetProcessSurfaceBufferConfig(PXP_Type *base, const pxp_ps_buffer_config_t *config) { assert(NULL != config); base->PS_CTRL = ((base->PS_CTRL & ~(PXP_PS_CTRL_FORMAT_MASK | PXP_PS_CTRL_WB_SWAP_MASK)) | PXP_PS_CTRL_FORMAT(config->pixelFormat) | PXP_PS_CTRL_WB_SWAP(config->swapByte)); base->PS_BUF = config->bufferAddr; base->PS_UBUF = config->bufferAddrU; base->PS_VBUF = config->bufferAddrV; base->PS_PITCH = config->pitchBytes; } /*! * brief Set the process surface scaler configuration. * * The valid down scale fact is 1/(2^12) ~ 16. * * param base PXP peripheral base address. * param inputWidth Input image width. * param inputHeight Input image height. * param outputWidth Output image width. * param outputHeight Output image height. */ void PXP_SetProcessSurfaceScaler( PXP_Type *base, uint16_t inputWidth, uint16_t inputHeight, uint16_t outputWidth, uint16_t outputHeight) { uint8_t decX, decY; uint32_t scaleX, scaleY; PXP_GetScalerParam(inputWidth, outputWidth, &decX, &scaleX); PXP_GetScalerParam(inputHeight, outputHeight, &decY, &scaleY); base->PS_CTRL = (base->PS_CTRL & ~(PXP_PS_CTRL_DECX_MASK | PXP_PS_CTRL_DECY_MASK)) | PXP_PS_CTRL_DECX(decX) | PXP_PS_CTRL_DECY(decY); base->PS_SCALE = PXP_PS_SCALE_XSCALE(scaleX) | PXP_PS_SCALE_YSCALE(scaleY); } /*! * brief Set the process surface position in output buffer. * * param base PXP peripheral base address. * param upperLeftX X of the upper left corner. * param upperLeftY Y of the upper left corner. * param lowerRightX X of the lower right corner. * param lowerRightY Y of the lower right corner. */ void PXP_SetProcessSurfacePosition( PXP_Type *base, uint16_t upperLeftX, uint16_t upperLeftY, uint16_t lowerRightX, uint16_t lowerRightY) { base->OUT_PS_ULC = PXP_OUT_PS_ULC_Y(upperLeftY) | PXP_OUT_PS_ULC_X(upperLeftX); base->OUT_PS_LRC = PXP_OUT_PS_LRC_Y(lowerRightY) | PXP_OUT_PS_LRC_X(lowerRightX); } /*! * brief Set the process surface color key. * * If the PS image matches colorkey range, the PS background color is output. Set * p colorKeyLow to 0xFFFFFFFF and p colorKeyHigh to 0 will disable the colorkeying. * * param base PXP peripheral base address. * param colorKeyLow Color key low range. * param colorKeyHigh Color key high range. */ void PXP_SetProcessSurfaceColorKey(PXP_Type *base, uint32_t colorKeyLow, uint32_t colorKeyHigh) { base->PS_CLRKEYLOW = colorKeyLow; base->PS_CLRKEYHIGH = colorKeyHigh; } /*! * brief Set the PXP outpt buffer configuration. * * param base PXP peripheral base address. * param config Pointer to the configuration. */ void PXP_SetOutputBufferConfig(PXP_Type *base, const pxp_output_buffer_config_t *config) { assert(NULL != config); base->OUT_CTRL = (base->OUT_CTRL & ~(PXP_OUT_CTRL_FORMAT_MASK | PXP_OUT_CTRL_INTERLACED_OUTPUT_MASK)) | PXP_OUT_CTRL_FORMAT(config->pixelFormat) | PXP_OUT_CTRL_INTERLACED_OUTPUT(config->interlacedMode); base->OUT_BUF = config->buffer0Addr; base->OUT_BUF2 = config->buffer1Addr; base->OUT_PITCH = config->pitchBytes; base->OUT_LRC = PXP_OUT_LRC_Y((uint32_t)config->height - 1U) | PXP_OUT_LRC_X((uint32_t)config->width - 1U); /* * The dither store size must be set to the same with the output buffer size, * otherwise the dither engine could not work. */ #if defined(PXP_DITHER_STORE_SIZE_CH0_OUT_WIDTH_MASK) base->DITHER_STORE_SIZE_CH0 = PXP_DITHER_STORE_SIZE_CH0_OUT_WIDTH(config->width - 1U) | PXP_DITHER_STORE_SIZE_CH0_OUT_HEIGHT(config->height - 1U); #endif } /*! * brief Set the next command. * * The PXP supports a primitive ability to queue up one operation while the current * operation is running. Workflow: * * 1. Prepare the PXP register values except STAT, CSCCOEFn, NEXT in the memory * in the order they appear in the register map. * 2. Call this function sets the new operation to PXP. * 3. There are two methods to check whether the PXP has loaded the new operation. * The first method is using ref PXP_IsNextCommandPending. If there is new operation * not loaded by the PXP, this function returns true. The second method is checking * the flag ref kPXP_CommandLoadFlag, if command loaded, this flag asserts. User * could enable interrupt ref kPXP_CommandLoadInterruptEnable to get the loaded * signal in interrupt way. * 4. When command loaded by PXP, a new command could be set using this function. * * param base PXP peripheral base address. * param commandAddr Address of the new command. */ void PXP_SetNextCommand(PXP_Type *base, void *commandAddr) { pxp_pvoid_u32_t addr; /* Make sure commands have been saved to memory. */ __DSB(); addr.pvoid = commandAddr; base->NEXT = addr.u32 & PXP_NEXT_POINTER_MASK; } #if !(defined(FSL_FEATURE_PXP_HAS_NO_CSC2) && FSL_FEATURE_PXP_HAS_NO_CSC2) /*! * brief Set the CSC2 configuration. * * The CSC2 module receives pixels in any color space and can convert the pixels * into any of RGB, YUV, or YCbCr color spaces. The output pixels are passed * onto the LUT and rotation engine for further processing * * param base PXP peripheral base address. * param config Pointer to the configuration. */ void PXP_SetCsc2Config(PXP_Type *base, const pxp_csc2_config_t *config) { assert(NULL != config); base->CSC2_CTRL = (base->CSC2_CTRL & ~PXP_CSC2_CTRL_CSC_MODE_MASK) | PXP_CSC2_CTRL_CSC_MODE(config->mode); base->CSC2_COEF0 = (PXP_ConvertFloat(config->A1, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF0_A1_SHIFT) | (PXP_ConvertFloat(config->A2, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF0_A2_SHIFT); base->CSC2_COEF1 = (PXP_ConvertFloat(config->A3, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF1_A3_SHIFT) | (PXP_ConvertFloat(config->B1, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF1_B1_SHIFT); base->CSC2_COEF2 = (PXP_ConvertFloat(config->B2, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF2_B2_SHIFT) | (PXP_ConvertFloat(config->B3, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF2_B3_SHIFT); base->CSC2_COEF3 = (PXP_ConvertFloat(config->C1, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF3_C1_SHIFT) | (PXP_ConvertFloat(config->C2, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF3_C2_SHIFT); base->CSC2_COEF4 = (PXP_ConvertFloat(config->C3, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF4_C3_SHIFT) | PXP_CSC2_COEF4_D1(config->D1); base->CSC2_COEF5 = PXP_CSC2_COEF5_D2(config->D2) | PXP_CSC2_COEF5_D3(config->D3); } #endif /*! * brief Set the CSC1 mode. * * The CSC1 module receives scaled YUV/YCbCr444 pixels from the scale engine and * converts the pixels to the RGB888 color space. It could only be used by process * surface. * * param base PXP peripheral base address. * param mode The conversion mode. */ void PXP_SetCsc1Mode(PXP_Type *base, pxp_csc1_mode_t mode) { /* * The equations used for Colorspace conversion are: * * R = C0*(Y+Y_OFFSET) + C1(V+UV_OFFSET) * G = C0*(Y+Y_OFFSET) + C3(U+UV_OFFSET) + C2(V+UV_OFFSET) * B = C0*(Y+Y_OFFSET) + C4(U+UV_OFFSET) */ if (kPXP_Csc1YUV2RGB == mode) { base->CSC1_COEF0 = (base->CSC1_COEF0 & ~(PXP_CSC1_COEF0_C0_MASK | PXP_CSC1_COEF0_Y_OFFSET_MASK | PXP_CSC1_COEF0_UV_OFFSET_MASK | PXP_CSC1_COEF0_YCBCR_MODE_MASK)) | PXP_CSC1_COEF0_C0(0x100U) /* 1.00. */ | PXP_CSC1_COEF0_Y_OFFSET(0x0U) /* 0. */ | PXP_CSC1_COEF0_UV_OFFSET(0x0U); /* 0. */ base->CSC1_COEF1 = PXP_CSC1_COEF1_C1(0x0123U) /* 1.140. */ | PXP_CSC1_COEF1_C4(0x0208U); /* 2.032. */ base->CSC1_COEF2 = PXP_CSC1_COEF2_C2(0x076BU) /* -0.851. */ | PXP_CSC1_COEF2_C3(0x079BU); /* -0.394. */ } else { base->CSC1_COEF0 = (base->CSC1_COEF0 & ~(PXP_CSC1_COEF0_C0_MASK | PXP_CSC1_COEF0_Y_OFFSET_MASK | PXP_CSC1_COEF0_UV_OFFSET_MASK)) | PXP_CSC1_COEF0_YCBCR_MODE_MASK | PXP_CSC1_COEF0_C0(0x12AU) /* 1.164. */ | PXP_CSC1_COEF0_Y_OFFSET(0x1F0U) /* -16. */ | PXP_CSC1_COEF0_UV_OFFSET(0x180U); /* -128. */ base->CSC1_COEF1 = PXP_CSC1_COEF1_C1(0x0198U) /* 1.596. */ | PXP_CSC1_COEF1_C4(0x0204U); /* 2.017. */ base->CSC1_COEF2 = PXP_CSC1_COEF2_C2(0x0730U) /* -0.813. */ | PXP_CSC1_COEF2_C3(0x079CU); /* -0.392. */ } } #if !(defined(FSL_FEATURE_PXP_HAS_NO_LUT) && FSL_FEATURE_PXP_HAS_NO_LUT) /*! * brief Set the LUT configuration. * * The lookup table (LUT) is used to modify pixels in a manner that is not linear * and that cannot be achieved by the color space conversion modules. To setup * the LUT, the complete workflow is: * 1. Use ref PXP_SetLutConfig to set the configuration, such as the lookup mode. * 2. Use ref PXP_LoadLutTable to load the lookup table to PXP. * 3. Use ref PXP_EnableLut to enable the function. * * param base PXP peripheral base address. * param config Pointer to the configuration. */ void PXP_SetLutConfig(PXP_Type *base, const pxp_lut_config_t *config) { base->LUT_CTRL = (base->LUT_CTRL & ~(PXP_LUT_CTRL_OUT_MODE_MASK | PXP_LUT_CTRL_LOOKUP_MODE_MASK)) | PXP_LUT_CTRL_LRU_UPD_MASK | /* Use Least Recently Used Policy Update Control. */ PXP_LUT_CTRL_OUT_MODE(config->outMode) | PXP_LUT_CTRL_LOOKUP_MODE(config->lookupMode); if (kPXP_LutOutRGBW4444CFA == config->outMode) { base->CFA = config->cfaValue; } } /*! * brief Set the look up table to PXP. * * If lookup mode is DIRECT mode, this function loads p bytesNum of values * from the address p memAddr into PXP LUT address p lutStartAddr. So this * function allows only update part of the PXP LUT. * * If lookup mode is CACHE mode, this function sets the new address to p memAddr * and invalid the PXP LUT cache. * * param base PXP peripheral base address. * param lookupMode Which lookup mode is used. Note that this parameter is only * used to distinguish DIRECT mode and CACHE mode, it does not change the register * value PXP_LUT_CTRL[LOOKUP_MODE]. To change that value, use function ref PXP_SetLutConfig. * param bytesNum How many bytes to set. This value must be divisable by 8. * param memAddr Address of look up table to set. * param lutStartAddr The LUT value will be loaded to LUT from index lutAddr. It should * be 8 bytes aligned. * * retval kStatus_Success Load successfully. * retval kStatus_InvalidArgument Failed because of invalid argument. */ status_t PXP_LoadLutTable( PXP_Type *base, pxp_lut_lookup_mode_t lookupMode, uint32_t bytesNum, uint32_t memAddr, uint16_t lutStartAddr) { if (kPXP_LutCacheRGB565 == lookupMode) { /* Make sure the previous memory write is finished, especially the LUT data memory. */ __DSB(); base->LUT_EXTMEM = memAddr; /* Invalid cache. */ base->LUT_CTRL |= PXP_LUT_CTRL_INVALID_MASK; } else { /* Number of bytes must be divisable by 8. */ if ((bytesNum & 0x07U) || (bytesNum < 8U) || (lutStartAddr & 0x07U) || (bytesNum + lutStartAddr > PXP_LUT_TABLE_BYTE)) { return kStatus_InvalidArgument; } base->LUT_EXTMEM = memAddr; base->LUT_ADDR = PXP_LUT_ADDR_ADDR(lutStartAddr) | PXP_LUT_ADDR_NUM_BYTES(bytesNum); base->STAT_CLR = PXP_STAT_LUT_DMA_LOAD_DONE_IRQ_MASK; /* Start DMA transfer. */ base->LUT_CTRL |= PXP_LUT_CTRL_DMA_START_MASK; __DSB(); /* Wait for transfer completed. */ while (!(base->STAT & PXP_STAT_LUT_DMA_LOAD_DONE_IRQ_MASK)) { } } return kStatus_Success; } #endif /* FSL_FEATURE_PXP_HAS_NO_LUT */ #if (defined(FSL_FEATURE_PXP_HAS_DITHER) && FSL_FEATURE_PXP_HAS_DITHER) /*! * brief Write data to the PXP internal memory. * * param base PXP peripheral base address. * param ram Which internal memory to write. * param bytesNum How many bytes to write. * param data Pointer to the data to write. * param memStartAddr The start address in the internal memory to write the data. */ void PXP_SetInternalRamData(PXP_Type *base, pxp_ram_t ram, uint32_t bytesNum, uint8_t *data, uint16_t memStartAddr) { assert((memStartAddr + bytesNum) <= PXP_INTERNAL_RAM_LUT_BYTE); base->INIT_MEM_CTRL = PXP_INIT_MEM_CTRL_ADDR(memStartAddr) | PXP_INIT_MEM_CTRL_SELECT(ram) | PXP_INIT_MEM_CTRL_START_MASK; while (bytesNum--) { base->INIT_MEM_DATA = (uint32_t)(*data); data++; } base->INIT_MEM_CTRL = 0U; } /*! * brief Set the dither final LUT data. * * The dither final LUT is only applicble to dither engine 0. It takes the bits[7:4] * of the output pixel and looks up and 8 bit value from the 16 value LUT to generate * the final output pixel to the next process module. * * param base PXP peripheral base address. * param data Pointer to the LUT data to set. */ void PXP_SetDitherFinalLutData(PXP_Type *base, const pxp_dither_final_lut_data_t *data) { base->DITHER_FINAL_LUT_DATA0 = data->data_3_0; base->DITHER_FINAL_LUT_DATA1 = data->data_7_4; base->DITHER_FINAL_LUT_DATA2 = data->data_11_8; base->DITHER_FINAL_LUT_DATA3 = data->data_15_12; } /*! * brief Enable or disable dither engine in the PXP process path. * * After the initialize function ref PXP_Init, the dither engine is disabled and not * use in the PXP processing path. This function enables the dither engine and * routes the dither engine output to the output buffer. When the dither engine * is enabled using this function, ref PXP_SetDitherConfig must be called to * configure dither engine correctly, otherwise there is not output to the output * buffer. * * param base PXP peripheral base address. * param enable Pass in true to enable, false to disable. */ void PXP_EnableDither(PXP_Type *base, bool enable) { if (enable) { base->CTRL_SET = PXP_CTRL_ENABLE_DITHER_MASK; /* Route dither output to output buffer. */ base->DATA_PATH_CTRL0 &= ~PXP_DATA_PATH_CTRL0_MUX14_SEL_MASK; } else { base->CTRL_CLR = PXP_CTRL_ENABLE_DITHER_MASK; /* Route MUX 12 output to output buffer. */ base->DATA_PATH_CTRL0 |= PXP_DATA_PATH_CTRL0_MUX14_SEL(1U); } } #endif /* FSL_FEATURE_PXP_HAS_DITHER */ /*! * brief Set the Porter Duff configuration. * * param base PXP peripheral base address. * param config Pointer to the configuration. */ void PXP_SetPorterDuffConfig(PXP_Type *base, const pxp_porter_duff_config_t *config) { assert(NULL != config); union { pxp_porter_duff_config_t pdConfigStruct; uint32_t u32; } pdConfig; pdConfig.pdConfigStruct = *config; base->PORTER_DUFF_CTRL = pdConfig.u32; } /*! * brief Get the Porter Duff configuration by blend mode. * * param mode The blend mode. * param config Pointer to the configuration. * retval kStatus_Success Successfully get the configuratoin. * retval kStatus_InvalidArgument The blend mode not supported. */ status_t PXP_GetPorterDuffConfig(pxp_porter_duff_blend_mode_t mode, pxp_porter_duff_config_t *config) { status_t status; union { pxp_porter_duff_config_t pdConfigStruct; uint32_t u32; } pdConfig; static const uint32_t pdCtrl[] = { /* kPXP_PorterDuffSrc */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorOne) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorZero), /* kPXP_PorterDuffAtop */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorStraight) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorInversed), /* kPXP_PorterDuffOver */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorOne) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorInversed), /* kPXP_PorterDuffIn */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorStraight) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorZero), /* kPXP_PorterDuffOut */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorInversed) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorZero), /* kPXP_PorterDuffDst */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorZero) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorOne), /* kPXP_PorterDuffDstAtop */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorInversed) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorStraight), /* kPXP_PorterDuffDstOver */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorInversed) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorOne), /* kPXP_PorterDuffDstIn */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorZero) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorStraight), /* kPXP_PorterDuffDstOut */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorZero) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorInversed), /* kPXP_PorterDuffXor */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorInversed) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorInversed), /* kPXP_PorterDuffClear */ PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK | PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorZero) | PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorZero), }; if (mode >= kPXP_PorterDuffMax) { status = kStatus_InvalidArgument; } else { pdConfig.u32 = pdCtrl[(uint32_t)mode]; *config = pdConfig.pdConfigStruct; status = kStatus_Success; } return status; } static void PXP_StartRectCopy(PXP_Type *base, uint32_t srcAddr, uint16_t srcPitchBytes, uint32_t destAddr, uint16_t destPitchBytes, uint16_t width, uint16_t height, pxp_as_pixel_format_t pixelFormat) { pxp_output_buffer_config_t outputBufferConfig; pxp_as_buffer_config_t asBufferConfig; uint32_t intMask; #if !(defined(FSL_FEATURE_PXP_HAS_NO_LUT) && FSL_FEATURE_PXP_HAS_NO_LUT) intMask = base->CTRL & (PXP_CTRL_NEXT_IRQ_ENABLE_MASK | PXP_CTRL_IRQ_ENABLE_MASK | PXP_CTRL_LUT_DMA_IRQ_ENABLE_MASK); #else intMask = base->CTRL & (PXP_CTRL_NEXT_IRQ_ENABLE_MASK | PXP_CTRL_IRQ_ENABLE_MASK); #endif PXP_ResetToInit(base); /* Restore previous interrupt configuration. */ PXP_EnableInterrupts(base, intMask); /* Disable PS */ PXP_SetProcessSurfacePosition(base, 0xFFFFU, 0xFFFFU, 0U, 0U); /* Input buffer. */ asBufferConfig.pixelFormat = pixelFormat; asBufferConfig.bufferAddr = srcAddr; asBufferConfig.pitchBytes = srcPitchBytes; PXP_SetAlphaSurfaceBufferConfig(base, &asBufferConfig); PXP_SetAlphaSurfacePosition(base, 0U, 0U, width - 1U, height - 1U); /* Alpha mode set to ROP, AS OR PS*/ const pxp_as_blend_config_t asBlendConfig = { .alpha = 0U, .invertAlpha = false, .alphaMode = kPXP_AlphaRop, .ropMode = kPXP_RopMergeAs}; PXP_SetAlphaSurfaceBlendConfig(base, &asBlendConfig); /* Output buffer. */ outputBufferConfig.pixelFormat = (pxp_output_pixel_format_t)pixelFormat; outputBufferConfig.interlacedMode = kPXP_OutputProgressive; outputBufferConfig.buffer0Addr = destAddr; outputBufferConfig.buffer1Addr = 0U; outputBufferConfig.pitchBytes = destPitchBytes; outputBufferConfig.width = width; outputBufferConfig.height = height; PXP_SetOutputBufferConfig(base, &outputBufferConfig); PXP_ClearStatusFlags(base, (uint32_t)kPXP_CompleteFlag); PXP_Start(base); } /*! * brief Copy picture from one buffer to another buffer. * * This function copies a rectangle from one buffer to another buffer. * * param base PXP peripheral base address. * retval kStatus_Success Successfully started the copy process. * retval kStatus_InvalidArgument Invalid argument. */ status_t PXP_StartPictureCopy(PXP_Type *base, const pxp_pic_copy_config_t *config) { uint8_t bytePerPixel; uint32_t copyFromAddr; uint32_t copyToAddr; if ((0U == config->height) || (0U == config->width)) { return kStatus_InvalidArgument; } if ((config->pixelFormat == kPXP_AsPixelFormatARGB8888) || (config->pixelFormat == kPXP_AsPixelFormatRGB888)) { bytePerPixel = 4U; } else { bytePerPixel = 2U; } copyFromAddr = config->srcPicBaseAddr + ((uint32_t)config->srcOffsetY * (uint32_t)config->srcPitchBytes) + bytePerPixel * config->srcOffsetX; copyToAddr = config->destPicBaseAddr + ((uint32_t)config->destOffsetY * (uint32_t)config->destPitchBytes) + bytePerPixel * config->destOffsetX; PXP_StartRectCopy(base, copyFromAddr, config->srcPitchBytes, copyToAddr, config->destPitchBytes, config->width, config->height, config->pixelFormat); return kStatus_Success; } /*! * brief Copy continous memory. * * The copy size should be 512 byte aligned. * * param base PXP peripheral base address. * retval kStatus_Success Successfully started the copy process. * retval kStatus_InvalidArgument Invalid argument. */ status_t PXP_StartMemCopy(PXP_Type *base, uint32_t srcAddr, uint32_t destAddr, uint32_t size) { uint16_t pitchBytes; uint32_t height; if ((0U == size) || ((size % 512U) != 0U)) { return kStatus_InvalidArgument; } /* * By default, PXP process block is 8x8. For better performance, choose * width and height dividable by block size. */ if (size < 8U * 512U) { height = 8U; pitchBytes = (uint16_t)(size / height); } else { pitchBytes = 512U; height = size / pitchBytes; } if (height > PXP_MAX_HEIGHT) { return kStatus_InvalidArgument; } PXP_StartRectCopy(base, srcAddr, pitchBytes, destAddr, pitchBytes, pitchBytes / 4U, (uint16_t)height, kPXP_AsPixelFormatARGB8888); return kStatus_Success; }