/* * Copyright (c) 2016, Freescale Semiconductor, Inc. * Copyright 2017-2020 NXP * All rights reserved. * * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _FSL_SPDIF_H_ #define _FSL_SPDIF_H_ #include "fsl_common.h" /*! * @addtogroup spdif * @{ */ /******************************************************************************* * Definitions ******************************************************************************/ /*! @name Driver version */ /*@{*/ #define FSL_SPDIF_DRIVER_VERSION (MAKE_VERSION(2, 0, 3)) /*!< Version 2.0.3 */ /*@}*/ /*! @brief SPDIF return status*/ enum { kStatus_SPDIF_RxDPLLLocked = MAKE_STATUS(kStatusGroup_SPDIF, 0), /*!< SPDIF Rx PLL locked. */ kStatus_SPDIF_TxFIFOError = MAKE_STATUS(kStatusGroup_SPDIF, 1), /*!< SPDIF Tx FIFO error. */ kStatus_SPDIF_TxFIFOResync = MAKE_STATUS(kStatusGroup_SPDIF, 2), /*!< SPDIF Tx left and right FIFO resync. */ kStatus_SPDIF_RxCnew = MAKE_STATUS(kStatusGroup_SPDIF, 3), /*!< SPDIF Rx status channel value updated. */ kStatus_SPDIF_ValidatyNoGood = MAKE_STATUS(kStatusGroup_SPDIF, 4), /*!< SPDIF validaty flag not good. */ kStatus_SPDIF_RxIllegalSymbol = MAKE_STATUS(kStatusGroup_SPDIF, 5), /*!< SPDIF Rx receive illegal symbol. */ kStatus_SPDIF_RxParityBitError = MAKE_STATUS(kStatusGroup_SPDIF, 6), /*!< SPDIF Rx parity bit error. */ kStatus_SPDIF_UChannelOverrun = MAKE_STATUS(kStatusGroup_SPDIF, 7), /*!< SPDIF receive U channel overrun. */ kStatus_SPDIF_QChannelOverrun = MAKE_STATUS(kStatusGroup_SPDIF, 8), /*!< SPDIF receive Q channel overrun. */ kStatus_SPDIF_UQChannelSync = MAKE_STATUS(kStatusGroup_SPDIF, 9), /*!< SPDIF U/Q channel sync found. */ kStatus_SPDIF_UQChannelFrameError = MAKE_STATUS(kStatusGroup_SPDIF, 10), /*!< SPDIF U/Q channel frame error. */ kStatus_SPDIF_RxFIFOError = MAKE_STATUS(kStatusGroup_SPDIF, 11), /*!< SPDIF Rx FIFO error. */ kStatus_SPDIF_RxFIFOResync = MAKE_STATUS(kStatusGroup_SPDIF, 12), /*!< SPDIF Rx left and right FIFO resync. */ kStatus_SPDIF_LockLoss = MAKE_STATUS(kStatusGroup_SPDIF, 13), /*!< SPDIF Rx PLL clock lock loss. */ kStatus_SPDIF_TxIdle = MAKE_STATUS(kStatusGroup_SPDIF, 14), /*!< SPDIF Tx is idle */ kStatus_SPDIF_RxIdle = MAKE_STATUS(kStatusGroup_SPDIF, 15), /*!< SPDIF Rx is idle */ kStatus_SPDIF_QueueFull = MAKE_STATUS(kStatusGroup_SPDIF, 16) /*!< SPDIF queue full */ }; /*! @brief SPDIF Rx FIFO full falg select, it decides when assert the rx full flag */ typedef enum _spdif_rxfull_select { kSPDIF_RxFull1Sample = 0x0u, /*!< Rx full at least 1 sample in left and right FIFO */ kSPDIF_RxFull4Samples, /*!< Rx full at least 4 sample in left and right FIFO*/ kSPDIF_RxFull8Samples, /*!< Rx full at least 8 sample in left and right FIFO*/ kSPDIF_RxFull16Samples, /*!< Rx full at least 16 sample in left and right FIFO*/ } spdif_rxfull_select_t; /*! @brief SPDIF tx FIFO EMPTY falg select, it decides when assert the tx empty flag */ typedef enum _spdif_txempty_select { kSPDIF_TxEmpty0Sample = 0x0u, /*!< Tx empty at most 0 sample in left and right FIFO */ kSPDIF_TxEmpty4Samples, /*!< Tx empty at most 4 sample in left and right FIFO*/ kSPDIF_TxEmpty8Samples, /*!< Tx empty at most 8 sample in left and right FIFO*/ kSPDIF_TxEmpty12Samples, /*!< Tx empty at most 12 sample in left and right FIFO*/ } spdif_txempty_select_t; /*! @brief SPDIF U channel source */ typedef enum _spdif_uchannel_source { kSPDIF_NoUChannel = 0x0U, /*!< No embedded U channel */ kSPDIF_UChannelFromRx = 0x1U, /*!< U channel from receiver, it is CD mode */ kSPDIF_UChannelFromTx = 0x3U, /*!< U channel from on chip tx */ } spdif_uchannel_source_t; /*! @brief SPDIF clock gain*/ typedef enum _spdif_gain_select { kSPDIF_GAIN_24 = 0x0U, /*!< Gain select is 24 */ kSPDIF_GAIN_16, /*!< Gain select is 16 */ kSPDIF_GAIN_12, /*!< Gain select is 12 */ kSPDIF_GAIN_8, /*!< Gain select is 8 */ kSPDIF_GAIN_6, /*!< Gain select is 6 */ kSPDIF_GAIN_4, /*!< Gain select is 4 */ kSPDIF_GAIN_3, /*!< Gain select is 3 */ } spdif_gain_select_t; /*! @brief SPDIF tx data source */ typedef enum _spdif_tx_source { kSPDIF_txFromReceiver = 0x1U, /*!< Tx data directly through SPDIF receiver */ kSPDIF_txNormal = 0x5U, /*!< Normal operation, data from processor */ } spdif_tx_source_t; /*! @brief SPDIF tx data source */ typedef enum _spdif_validity_config { kSPDIF_validityFlagAlwaysSet = 0x0U, /*!< Outgoing validity flags always set */ kSPDIF_validityFlagAlwaysClear, /*!< Outgoing validity flags always clear */ } spdif_validity_config_t; /*! @brief The SPDIF interrupt enable flag */ enum { kSPDIF_RxDPLLLocked = SPDIF_SIE_LOCK_MASK, /*!< SPDIF DPLL locked */ kSPDIF_TxFIFOError = SPDIF_SIE_TXUNOV_MASK, /*!< Tx FIFO underrun or overrun */ kSPDIF_TxFIFOResync = SPDIF_SIE_TXRESYN_MASK, /*!< Tx FIFO left and right channel resync */ kSPDIF_RxControlChannelChange = SPDIF_SIE_CNEW_MASK, /*!< SPDIF Rx control channel value changed */ kSPDIF_ValidityFlagNoGood = SPDIF_SIE_VALNOGOOD_MASK, /*!< SPDIF validity flag no good */ kSPDIF_RxIllegalSymbol = SPDIF_SIE_SYMERR_MASK, /*!< SPDIF receiver found illegal symbol */ kSPDIF_RxParityBitError = SPDIF_SIE_BITERR_MASK, /*!< SPDIF receiver found parity bit error */ kSPDIF_UChannelReceiveRegisterFull = SPDIF_SIE_URXFUL_MASK, /*!< SPDIF U channel revceive register full */ kSPDIF_UChannelReceiveRegisterOverrun = SPDIF_SIE_URXOV_MASK, /*!< SPDIF U channel receive register overrun */ kSPDIF_QChannelReceiveRegisterFull = SPDIF_SIE_QRXFUL_MASK, /*!< SPDIF Q channel receive reigster full */ kSPDIF_QChannelReceiveRegisterOverrun = SPDIF_SIE_QRXOV_MASK, /*!< SPDIF Q channel receive register overrun */ kSPDIF_UQChannelSync = SPDIF_SIE_UQSYNC_MASK, /*!< SPDIF U/Q channel sync found */ kSPDIF_UQChannelFrameError = SPDIF_SIE_UQERR_MASK, /*!< SPDIF U/Q channel frame error */ kSPDIF_RxFIFOError = SPDIF_SIE_RXFIFOUNOV_MASK, /*!< SPDIF Rx FIFO underrun/overrun */ kSPDIF_RxFIFOResync = SPDIF_SIE_RXFIFORESYN_MASK, /*!< SPDIF Rx left and right FIFO resync */ kSPDIF_LockLoss = SPDIF_SIE_LOCKLOSS_MASK, /*!< SPDIF receiver loss of lock */ kSPDIF_TxFIFOEmpty = SPDIF_SIE_TXEM_MASK, /*!< SPDIF Tx FIFO empty */ kSPDIF_RxFIFOFull = SPDIF_SIE_RXFIFOFUL_MASK /*!< SPDIF Rx FIFO full */ }; /*! @brief The DMA request sources */ enum { kSPDIF_RxDMAEnable = SPDIF_SCR_DMA_RX_EN_MASK, /*!< Rx FIFO full */ kSPDIF_TxDMAEnable = SPDIF_SCR_DMA_TX_EN_MASK, /*!< Tx FIFO empty */ }; /*! @brief SPDIF user configuration structure */ typedef struct _spdif_config { bool isTxAutoSync; /*!< If auto sync mechanism open */ bool isRxAutoSync; /*!< If auto sync mechanism open */ uint8_t DPLLClkSource; /*!< SPDIF DPLL clock source, range from 0~15, meaning is chip-specific */ uint8_t txClkSource; /*!< SPDIF tx clock source, range from 0~7, meaning is chip-specific */ spdif_rxfull_select_t rxFullSelect; /*!< SPDIF rx buffer full select */ spdif_txempty_select_t txFullSelect; /*!< SPDIF tx buffer empty select */ spdif_uchannel_source_t uChannelSrc; /*!< U channel source */ spdif_tx_source_t txSource; /*!< SPDIF tx data source */ spdif_validity_config_t validityConfig; /*!< Validity flag config */ spdif_gain_select_t gain; /*!< Rx receive clock measure gain parameter. */ } spdif_config_t; /*!@brief SPDIF transfer queue size, user can refine it according to use case. */ #define SPDIF_XFER_QUEUE_SIZE (4U) /*! @brief SPDIF transfer structure */ typedef struct _spdif_transfer { uint8_t *data; /*!< Data start address to transfer. */ uint8_t *qdata; /*!< Data buffer for Q channel */ uint8_t *udata; /*!< Data buffer for C channel */ size_t dataSize; /*!< Transfer size. */ } spdif_transfer_t; typedef struct _spdif_handle spdif_handle_t; /*! @brief SPDIF transfer callback prototype */ typedef void (*spdif_transfer_callback_t)(SPDIF_Type *base, spdif_handle_t *handle, status_t status, void *userData); /*! @brief SPDIF handle structure */ struct _spdif_handle { uint32_t state; /*!< Transfer status */ spdif_transfer_callback_t callback; /*!< Callback function called at transfer event*/ void *userData; /*!< Callback parameter passed to callback function*/ spdif_transfer_t spdifQueue[SPDIF_XFER_QUEUE_SIZE]; /*!< Transfer queue storing queued transfer */ size_t transferSize[SPDIF_XFER_QUEUE_SIZE]; /*!< Data bytes need to transfer */ volatile uint8_t queueUser; /*!< Index for user to queue transfer */ volatile uint8_t queueDriver; /*!< Index for driver to get the transfer data and size */ uint8_t watermark; /*!< Watermark value */ }; /******************************************************************************* * API ******************************************************************************/ #if defined(__cplusplus) extern "C" { #endif /*_cplusplus*/ /*! * @name Initialization and deinitialization * @{ */ /*! * @brief Initializes the SPDIF peripheral. * * Ungates the SPDIF clock, resets the module, and configures SPDIF with a configuration structure. * The configuration structure can be custom filled or set with default values by * SPDIF_GetDefaultConfig(). * * @note This API should be called at the beginning of the application to use * the SPDIF driver. Otherwise, accessing the SPDIF module can cause a hard fault * because the clock is not enabled. * * @param base SPDIF base pointer * @param config SPDIF configuration structure. */ void SPDIF_Init(SPDIF_Type *base, const spdif_config_t *config); /*! * @brief Sets the SPDIF configuration structure to default values. * * This API initializes the configuration structure for use in SPDIF_Init. * The initialized structure can remain unchanged in SPDIF_Init, or it can be modified * before calling SPDIF_Init. * This is an example. @code spdif_config_t config; SPDIF_GetDefaultConfig(&config); @endcode * * @param config pointer to master configuration structure */ void SPDIF_GetDefaultConfig(spdif_config_t *config); /*! * @brief De-initializes the SPDIF peripheral. * * This API gates the SPDIF clock. The SPDIF module can't operate unless SPDIF_Init is called to enable the clock. * * @param base SPDIF base pointer */ void SPDIF_Deinit(SPDIF_Type *base); /*! * @brief Get the instance number for SPDIF. * * @param base SPDIF base pointer. */ uint32_t SPDIF_GetInstance(SPDIF_Type *base); /*! * @brief Resets the SPDIF Tx. * * This function makes Tx FIFO in reset mode. * * @param base SPDIF base pointer */ static inline void SPDIF_TxFIFOReset(SPDIF_Type *base) { base->SCR |= SPDIF_SCR_RXFIFO_RST_MASK; } /*! * @brief Resets the SPDIF Rx. * * This function enables the software reset and FIFO reset of SPDIF Rx. After reset, clear the reset bit. * * @param base SPDIF base pointer */ static inline void SPDIF_RxFIFOReset(SPDIF_Type *base) { base->SCR |= SPDIF_SCR_RXFIFO_RST_MASK; } /*! * @brief Enables/disables the SPDIF Tx. * * @param base SPDIF base pointer * @param enable True means enable SPDIF Tx, false means disable. */ void SPDIF_TxEnable(SPDIF_Type *base, bool enable); /*! * @brief Enables/disables the SPDIF Rx. * * @param base SPDIF base pointer * @param enable True means enable SPDIF Rx, false means disable. */ static inline void SPDIF_RxEnable(SPDIF_Type *base, bool enable) { if (enable) { /* Open Rx FIFO */ base->SCR &= ~(SPDIF_SCR_RXFIFO_CTRL_MASK | SPDIF_SCR_RXFIFO_OFF_ON_MASK); } else { base->SCR |= SPDIF_SCR_RXFIFO_OFF_ON_MASK; } } /*! @} */ /*! * @name Status * @{ */ /*! * @brief Gets the SPDIF status flag state. * * @param base SPDIF base pointer * @return SPDIF status flag value. Use the _spdif_interrupt_enable_t to get the status value needed. */ static inline uint32_t SPDIF_GetStatusFlag(SPDIF_Type *base) { return base->SIS; } /*! * @brief Clears the SPDIF status flag state. * * @param base SPDIF base pointer * @param mask State mask. It can be a combination of the _spdif_interrupt_enable_t member. Notice these members * cannot be included, as these flags cannot be cleared by writing 1 to these bits: * @arg kSPDIF_UChannelReceiveRegisterFull * @arg kSPDIF_QChannelReceiveRegisterFull * @arg kSPDIF_TxFIFOEmpty * @arg kSPDIF_RxFIFOFull */ static inline void SPDIF_ClearStatusFlags(SPDIF_Type *base, uint32_t mask) { base->SIC = mask; } /*! @} */ /*! * @name Interrupts * @{ */ /*! * @brief Enables the SPDIF Tx interrupt requests. * * @param base SPDIF base pointer * @param mask interrupt source * The parameter can be a combination of the following sources if defined. * @arg kSPDIF_WordStartInterruptEnable * @arg kSPDIF_SyncErrorInterruptEnable * @arg kSPDIF_FIFOWarningInterruptEnable * @arg kSPDIF_FIFORequestInterruptEnable * @arg kSPDIF_FIFOErrorInterruptEnable */ static inline void SPDIF_EnableInterrupts(SPDIF_Type *base, uint32_t mask) { base->SIE |= mask; } /*! * @brief Disables the SPDIF Tx interrupt requests. * * @param base SPDIF base pointer * @param mask interrupt source * The parameter can be a combination of the following sources if defined. * @arg kSPDIF_WordStartInterruptEnable * @arg kSPDIF_SyncErrorInterruptEnable * @arg kSPDIF_FIFOWarningInterruptEnable * @arg kSPDIF_FIFORequestInterruptEnable * @arg kSPDIF_FIFOErrorInterruptEnable */ static inline void SPDIF_DisableInterrupts(SPDIF_Type *base, uint32_t mask) { base->SIE &= ~mask; } /*! @} */ /*! * @name DMA Control * @{ */ /*! * @brief Enables/disables the SPDIF DMA requests. * @param base SPDIF base pointer * @param mask SPDIF DMA enable mask, The parameter can be a combination of the following sources if defined * @arg kSPDIF_RxDMAEnable * @arg kSPDIF_TxDMAEnable * @param enable True means enable DMA, false means disable DMA. */ static inline void SPDIF_EnableDMA(SPDIF_Type *base, uint32_t mask, bool enable) { if (enable) { base->SCR |= mask; } else { base->SCR &= ~mask; } } /*! * @brief Gets the SPDIF Tx left data register address. * * This API is used to provide a transfer address for the SPDIF DMA transfer configuration. * * @param base SPDIF base pointer. * @return data register address. */ static inline uint32_t SPDIF_TxGetLeftDataRegisterAddress(SPDIF_Type *base) { return (uint32_t)(&(base->STL)); } /*! * @brief Gets the SPDIF Tx right data register address. * * This API is used to provide a transfer address for the SPDIF DMA transfer configuration. * * @param base SPDIF base pointer. * @return data register address. */ static inline uint32_t SPDIF_TxGetRightDataRegisterAddress(SPDIF_Type *base) { return (uint32_t)(&(base->STR)); } /*! * @brief Gets the SPDIF Rx left data register address. * * This API is used to provide a transfer address for the SPDIF DMA transfer configuration. * * @param base SPDIF base pointer. * @return data register address. */ static inline uint32_t SPDIF_RxGetLeftDataRegisterAddress(SPDIF_Type *base) { return (uint32_t)(&(base->SRL)); } /*! * @brief Gets the SPDIF Rx right data register address. * * This API is used to provide a transfer address for the SPDIF DMA transfer configuration. * * @param base SPDIF base pointer. * @return data register address. */ static inline uint32_t SPDIF_RxGetRightDataRegisterAddress(SPDIF_Type *base) { return (uint32_t)(&(base->SRR)); } /*! @} */ /*! * @name Bus Operations * @{ */ /*! * @brief Configures the SPDIF Tx sample rate. * * The audio format can be changed at run-time. This function configures the sample rate. * * @param base SPDIF base pointer. * @param sampleRate_Hz SPDIF sample rate frequency in Hz. * @param sourceClockFreq_Hz SPDIF tx clock source frequency in Hz. */ void SPDIF_TxSetSampleRate(SPDIF_Type *base, uint32_t sampleRate_Hz, uint32_t sourceClockFreq_Hz); /*! * @brief Configures the SPDIF Rx audio format. * * The audio format can be changed at run-time. This function configures the sample rate and audio data * format to be transferred. * * @param base SPDIF base pointer. * @param clockSourceFreq_Hz SPDIF system clock frequency in hz. */ uint32_t SPDIF_GetRxSampleRate(SPDIF_Type *base, uint32_t clockSourceFreq_Hz); /*! * @brief Sends data using a blocking method. * * @note This function blocks by polling until data is ready to be sent. * * @param base SPDIF base pointer. * @param buffer Pointer to the data to be written. * @param size Bytes to be written. */ void SPDIF_WriteBlocking(SPDIF_Type *base, uint8_t *buffer, uint32_t size); /*! * @brief Writes data into SPDIF FIFO. * * @param base SPDIF base pointer. * @param data Data needs to be written. */ static inline void SPDIF_WriteLeftData(SPDIF_Type *base, uint32_t data) { base->STL = data; } /*! * @brief Writes data into SPDIF FIFO. * * @param base SPDIF base pointer. * @param data Data needs to be written. */ static inline void SPDIF_WriteRightData(SPDIF_Type *base, uint32_t data) { base->STR = data; } /*! * @brief Writes data into SPDIF FIFO. * * @param base SPDIF base pointer. * @param data Data needs to be written. */ static inline void SPDIF_WriteChannelStatusHigh(SPDIF_Type *base, uint32_t data) { base->STCSCH = data; } /*! * @brief Writes data into SPDIF FIFO. * * @param base SPDIF base pointer. * @param data Data needs to be written. */ static inline void SPDIF_WriteChannelStatusLow(SPDIF_Type *base, uint32_t data) { base->STCSCL = data; } /*! * @brief Receives data using a blocking method. * * @note This function blocks by polling until data is ready to be sent. * * @param base SPDIF base pointer. * @param buffer Pointer to the data to be read. * @param size Bytes to be read. */ void SPDIF_ReadBlocking(SPDIF_Type *base, uint8_t *buffer, uint32_t size); /*! * @brief Reads data from the SPDIF FIFO. * * @param base SPDIF base pointer. * @return Data in SPDIF FIFO. */ static inline uint32_t SPDIF_ReadLeftData(SPDIF_Type *base) { return base->SRL; } /*! * @brief Reads data from the SPDIF FIFO. * * @param base SPDIF base pointer. * @return Data in SPDIF FIFO. */ static inline uint32_t SPDIF_ReadRightData(SPDIF_Type *base) { return base->SRR; } /*! * @brief Reads data from the SPDIF FIFO. * * @param base SPDIF base pointer. * @return Data in SPDIF FIFO. */ static inline uint32_t SPDIF_ReadChannelStatusHigh(SPDIF_Type *base) { return base->SRCSH; } /*! * @brief Reads data from the SPDIF FIFO. * * @param base SPDIF base pointer. * @return Data in SPDIF FIFO. */ static inline uint32_t SPDIF_ReadChannelStatusLow(SPDIF_Type *base) { return base->SRCSL; } /*! * @brief Reads data from the SPDIF FIFO. * * @param base SPDIF base pointer. * @return Data in SPDIF FIFO. */ static inline uint32_t SPDIF_ReadQChannel(SPDIF_Type *base) { return base->SRQ; } /*! * @brief Reads data from the SPDIF FIFO. * * @param base SPDIF base pointer. * @return Data in SPDIF FIFO. */ static inline uint32_t SPDIF_ReadUChannel(SPDIF_Type *base) { return base->SRU; } /*! @} */ /*! * @name Transactional * @{ */ /*! * @brief Initializes the SPDIF Tx handle. * * This function initializes the Tx handle for the SPDIF Tx transactional APIs. Call * this function once to get the handle initialized. * * @param base SPDIF base pointer * @param handle SPDIF handle pointer. * @param callback Pointer to the user callback function. * @param userData User parameter passed to the callback function */ void SPDIF_TransferTxCreateHandle(SPDIF_Type *base, spdif_handle_t *handle, spdif_transfer_callback_t callback, void *userData); /*! * @brief Initializes the SPDIF Rx handle. * * This function initializes the Rx handle for the SPDIF Rx transactional APIs. Call * this function once to get the handle initialized. * * @param base SPDIF base pointer. * @param handle SPDIF handle pointer. * @param callback Pointer to the user callback function. * @param userData User parameter passed to the callback function. */ void SPDIF_TransferRxCreateHandle(SPDIF_Type *base, spdif_handle_t *handle, spdif_transfer_callback_t callback, void *userData); /*! * @brief Performs an interrupt non-blocking send transfer on SPDIF. * * @note This API returns immediately after the transfer initiates. * Call the SPDIF_TxGetTransferStatusIRQ to poll the transfer status and check whether * the transfer is finished. If the return status is not kStatus_SPDIF_Busy, the transfer * is finished. * * @param base SPDIF base pointer. * @param handle Pointer to the spdif_handle_t structure which stores the transfer state. * @param xfer Pointer to the spdif_transfer_t structure. * @retval kStatus_Success Successfully started the data receive. * @retval kStatus_SPDIF_TxBusy Previous receive still not finished. * @retval kStatus_InvalidArgument The input parameter is invalid. */ status_t SPDIF_TransferSendNonBlocking(SPDIF_Type *base, spdif_handle_t *handle, spdif_transfer_t *xfer); /*! * @brief Performs an interrupt non-blocking receive transfer on SPDIF. * * @note This API returns immediately after the transfer initiates. * Call the SPDIF_RxGetTransferStatusIRQ to poll the transfer status and check whether * the transfer is finished. If the return status is not kStatus_SPDIF_Busy, the transfer * is finished. * * @param base SPDIF base pointer * @param handle Pointer to the spdif_handle_t structure which stores the transfer state. * @param xfer Pointer to the spdif_transfer_t structure. * @retval kStatus_Success Successfully started the data receive. * @retval kStatus_SPDIF_RxBusy Previous receive still not finished. * @retval kStatus_InvalidArgument The input parameter is invalid. */ status_t SPDIF_TransferReceiveNonBlocking(SPDIF_Type *base, spdif_handle_t *handle, spdif_transfer_t *xfer); /*! * @brief Gets a set byte count. * * @param base SPDIF base pointer. * @param handle Pointer to the spdif_handle_t structure which stores the transfer state. * @param count Bytes count sent. * @retval kStatus_Success Succeed get the transfer count. * @retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress. */ status_t SPDIF_TransferGetSendCount(SPDIF_Type *base, spdif_handle_t *handle, size_t *count); /*! * @brief Gets a received byte count. * * @param base SPDIF base pointer. * @param handle Pointer to the spdif_handle_t structure which stores the transfer state. * @param count Bytes count received. * @retval kStatus_Success Succeed get the transfer count. * @retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress. */ status_t SPDIF_TransferGetReceiveCount(SPDIF_Type *base, spdif_handle_t *handle, size_t *count); /*! * @brief Aborts the current send. * * @note This API can be called any time when an interrupt non-blocking transfer initiates * to abort the transfer early. * * @param base SPDIF base pointer. * @param handle Pointer to the spdif_handle_t structure which stores the transfer state. */ void SPDIF_TransferAbortSend(SPDIF_Type *base, spdif_handle_t *handle); /*! * @brief Aborts the current IRQ receive. * * @note This API can be called when an interrupt non-blocking transfer initiates * to abort the transfer early. * * @param base SPDIF base pointer * @param handle Pointer to the spdif_handle_t structure which stores the transfer state. */ void SPDIF_TransferAbortReceive(SPDIF_Type *base, spdif_handle_t *handle); /*! * @brief Tx interrupt handler. * * @param base SPDIF base pointer. * @param handle Pointer to the spdif_handle_t structure. */ void SPDIF_TransferTxHandleIRQ(SPDIF_Type *base, spdif_handle_t *handle); /*! * @brief Tx interrupt handler. * * @param base SPDIF base pointer. * @param handle Pointer to the spdif_handle_t structure. */ void SPDIF_TransferRxHandleIRQ(SPDIF_Type *base, spdif_handle_t *handle); /*! @} */ #if defined(__cplusplus) } #endif /*_cplusplus*/ /*! @} */ #endif /* _FSL_SPDIF_H_ */