/* ---------------------------------------------------------------------------- */
/*                  Atmel Microcontroller Software Support                      */
/*                       SAM Software Package License                           */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) 2015, Atmel Corporation                                        */
/*                                                                              */
/* All rights reserved.                                                         */
/*                                                                              */
/* Redistribution and use in source and binary forms, with or without           */
/* modification, are permitted provided that the following condition is met:    */
/*                                                                              */
/* - Redistributions of source code must retain the above copyright notice,     */
/* this list of conditions and the disclaimer below.                            */
/*                                                                              */
/* Atmel's name may not be used to endorse or promote products derived from     */
/* this software without specific prior written permission.                     */
/*                                                                              */
/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
/* ---------------------------------------------------------------------------- */

#ifndef _SAMS70_ACC_COMPONENT_
#define _SAMS70_ACC_COMPONENT_

/* ============================================================================= */
/**  SOFTWARE API DEFINITION FOR Analog Comparator Controller */
/* ============================================================================= */
/** \addtogroup SAMS70_ACC Analog Comparator Controller */
/*@{*/

#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
/** \brief Acc hardware registers */
typedef struct {
  __O  uint32_t ACC_CR;        /**< \brief (Acc Offset: 0x00) Control Register */
  __IO uint32_t ACC_MR;        /**< \brief (Acc Offset: 0x04) Mode Register */
  __I  uint32_t Reserved1[7];
  __O  uint32_t ACC_IER;       /**< \brief (Acc Offset: 0x24) Interrupt Enable Register */
  __O  uint32_t ACC_IDR;       /**< \brief (Acc Offset: 0x28) Interrupt Disable Register */
  __I  uint32_t ACC_IMR;       /**< \brief (Acc Offset: 0x2C) Interrupt Mask Register */
  __I  uint32_t ACC_ISR;       /**< \brief (Acc Offset: 0x30) Interrupt Status Register */
  __I  uint32_t Reserved2[24];
  __IO uint32_t ACC_ACR;       /**< \brief (Acc Offset: 0x94) Analog Control Register */
  __I  uint32_t Reserved3[19];
  __IO uint32_t ACC_WPMR;      /**< \brief (Acc Offset: 0xE4) Write Protection Mode Register */
  __I  uint32_t ACC_WPSR;      /**< \brief (Acc Offset: 0xE8) Write Protection Status Register */
} Acc;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- ACC_CR : (ACC Offset: 0x00) Control Register -------- */
#define ACC_CR_SWRST (0x1u << 0) /**< \brief (ACC_CR) Software Reset */
/* -------- ACC_MR : (ACC Offset: 0x04) Mode Register -------- */
#define ACC_MR_SELMINUS_Pos 0
#define ACC_MR_SELMINUS_Msk (0x7u << ACC_MR_SELMINUS_Pos) /**< \brief (ACC_MR) Selection for Minus Comparator Input */
#define ACC_MR_SELMINUS(value) ((ACC_MR_SELMINUS_Msk & ((value) << ACC_MR_SELMINUS_Pos)))
#define   ACC_MR_SELMINUS_TS (0x0u << 0) /**< \brief (ACC_MR) Select TS */
#define   ACC_MR_SELMINUS_VREFP (0x1u << 0) /**< \brief (ACC_MR) Select VREFP */
#define   ACC_MR_SELMINUS_DAC0 (0x2u << 0) /**< \brief (ACC_MR) Select DAC0 */
#define   ACC_MR_SELMINUS_DAC1 (0x3u << 0) /**< \brief (ACC_MR) Select DAC1 */
#define   ACC_MR_SELMINUS_AFE0_AD0 (0x4u << 0) /**< \brief (ACC_MR) Select AFE0_AD0 */
#define   ACC_MR_SELMINUS_AFE0_AD1 (0x5u << 0) /**< \brief (ACC_MR) Select AFE0_AD1 */
#define   ACC_MR_SELMINUS_AFE0_AD2 (0x6u << 0) /**< \brief (ACC_MR) Select AFE0_AD2 */
#define   ACC_MR_SELMINUS_AFE0_AD3 (0x7u << 0) /**< \brief (ACC_MR) Select AFE0_AD3 */
#define ACC_MR_SELPLUS_Pos 4
#define ACC_MR_SELPLUS_Msk (0x7u << ACC_MR_SELPLUS_Pos) /**< \brief (ACC_MR) Selection For Plus Comparator Input */
#define ACC_MR_SELPLUS(value) ((ACC_MR_SELPLUS_Msk & ((value) << ACC_MR_SELPLUS_Pos)))
#define   ACC_MR_SELPLUS_AFE0_AD0 (0x0u << 4) /**< \brief (ACC_MR) Select AFE0_AD0 */
#define   ACC_MR_SELPLUS_AFE0_AD1 (0x1u << 4) /**< \brief (ACC_MR) Select AFE0_AD1 */
#define   ACC_MR_SELPLUS_AFE0_AD2 (0x2u << 4) /**< \brief (ACC_MR) Select AFE0_AD2 */
#define   ACC_MR_SELPLUS_AFE0_AD3 (0x3u << 4) /**< \brief (ACC_MR) Select AFE0_AD3 */
#define   ACC_MR_SELPLUS_AFE0_AD4 (0x4u << 4) /**< \brief (ACC_MR) Select AFE0_AD4 */
#define   ACC_MR_SELPLUS_AFE0_AD5 (0x5u << 4) /**< \brief (ACC_MR) Select AFE0_AD5 */
#define   ACC_MR_SELPLUS_AFE1_AD0 (0x6u << 4) /**< \brief (ACC_MR) Select AFE1_AD0 */
#define   ACC_MR_SELPLUS_AFE1_AD1 (0x7u << 4) /**< \brief (ACC_MR) Select AFE1_AD1 */
#define ACC_MR_ACEN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator Enable */
#define   ACC_MR_ACEN_DIS (0x0u << 8) /**< \brief (ACC_MR) Analog comparator disabled. */
#define   ACC_MR_ACEN_EN (0x1u << 8) /**< \brief (ACC_MR) Analog comparator enabled. */
#define ACC_MR_EDGETYP_Pos 9
#define ACC_MR_EDGETYP_Msk (0x3u << ACC_MR_EDGETYP_Pos) /**< \brief (ACC_MR) Edge Type */
#define ACC_MR_EDGETYP(value) ((ACC_MR_EDGETYP_Msk & ((value) << ACC_MR_EDGETYP_Pos)))
#define   ACC_MR_EDGETYP_RISING (0x0u << 9) /**< \brief (ACC_MR) Only rising edge of comparator output */
#define   ACC_MR_EDGETYP_FALLING (0x1u << 9) /**< \brief (ACC_MR) Falling edge of comparator output */
#define   ACC_MR_EDGETYP_ANY (0x2u << 9) /**< \brief (ACC_MR) Any edge of comparator output */
#define ACC_MR_INV (0x1u << 12) /**< \brief (ACC_MR) Invert Comparator Output */
#define   ACC_MR_INV_DIS (0x0u << 12) /**< \brief (ACC_MR) Analog comparator output is directly processed. */
#define   ACC_MR_INV_EN (0x1u << 12) /**< \brief (ACC_MR) Analog comparator output is inverted prior to being processed. */
#define ACC_MR_SELFS (0x1u << 13) /**< \brief (ACC_MR) Selection Of Fault Source */
#define   ACC_MR_SELFS_CE (0x0u << 13) /**< \brief (ACC_MR) The CE flag is used to drive the FAULT output. */
#define   ACC_MR_SELFS_OUTPUT (0x1u << 13) /**< \brief (ACC_MR) The output of the analog comparator flag is used to drive the FAULT output. */
#define ACC_MR_FE (0x1u << 14) /**< \brief (ACC_MR) Fault Enable */
#define   ACC_MR_FE_DIS (0x0u << 14) /**< \brief (ACC_MR) The FAULT output is tied to 0. */
#define   ACC_MR_FE_EN (0x1u << 14) /**< \brief (ACC_MR) The FAULT output is driven by the signal defined by SELFS. */
/* -------- ACC_IER : (ACC Offset: 0x24) Interrupt Enable Register -------- */
#define ACC_IER_CE (0x1u << 0) /**< \brief (ACC_IER) Comparison Edge */
/* -------- ACC_IDR : (ACC Offset: 0x28) Interrupt Disable Register -------- */
#define ACC_IDR_CE (0x1u << 0) /**< \brief (ACC_IDR) Comparison Edge */
/* -------- ACC_IMR : (ACC Offset: 0x2C) Interrupt Mask Register -------- */
#define ACC_IMR_CE (0x1u << 0) /**< \brief (ACC_IMR) Comparison Edge */
/* -------- ACC_ISR : (ACC Offset: 0x30) Interrupt Status Register -------- */
#define ACC_ISR_CE (0x1u << 0) /**< \brief (ACC_ISR) Comparison Edge (cleared on read) */
#define ACC_ISR_SCO (0x1u << 1) /**< \brief (ACC_ISR) Synchronized Comparator Output */
#define ACC_ISR_MASK (0x1u << 31) /**< \brief (ACC_ISR) Flag Mask */
/* -------- ACC_ACR : (ACC Offset: 0x94) Analog Control Register -------- */
#define ACC_ACR_ISEL (0x1u << 0) /**< \brief (ACC_ACR) Current Selection */
#define   ACC_ACR_ISEL_LOPW (0x0u << 0) /**< \brief (ACC_ACR) Low-power option. */
#define   ACC_ACR_ISEL_HISP (0x1u << 0) /**< \brief (ACC_ACR) High-speed option. */
#define ACC_ACR_HYST_Pos 1
#define ACC_ACR_HYST_Msk (0x3u << ACC_ACR_HYST_Pos) /**< \brief (ACC_ACR) Hysteresis Selection */
#define ACC_ACR_HYST(value) ((ACC_ACR_HYST_Msk & ((value) << ACC_ACR_HYST_Pos)))
/* -------- ACC_WPMR : (ACC Offset: 0xE4) Write Protection Mode Register -------- */
#define ACC_WPMR_WPEN (0x1u << 0) /**< \brief (ACC_WPMR) Write Protection Enable */
#define ACC_WPMR_WPKEY_Pos 8
#define ACC_WPMR_WPKEY_Msk (0xffffffu << ACC_WPMR_WPKEY_Pos) /**< \brief (ACC_WPMR) Write Protection Key */
#define ACC_WPMR_WPKEY(value) ((ACC_WPMR_WPKEY_Msk & ((value) << ACC_WPMR_WPKEY_Pos)))
#define   ACC_WPMR_WPKEY_PASSWD (0x414343u << 8) /**< \brief (ACC_WPMR) Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0. */
/* -------- ACC_WPSR : (ACC Offset: 0xE8) Write Protection Status Register -------- */
#define ACC_WPSR_WPVS (0x1u << 0) /**< \brief (ACC_WPSR) Write Protection Violation Status */

/*@}*/


#endif /* _SAMS70_ACC_COMPONENT_ */