From bffb93879940c71c58d2c66410e1bd5e5e4dc979 Mon Sep 17 00:00:00 2001
From: Joel Sherrill <joel.sherrill@OARcorp.com>
Date: Tue, 20 Jan 1998 19:30:30 +0000
Subject: Removed PROJECT_HOME and CONFIG_DIR variables.

---
 make/custom/pc386.cfg | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)
 create mode 100644 make/custom/pc386.cfg

(limited to 'make/custom/pc386.cfg')

diff --git a/make/custom/pc386.cfg b/make/custom/pc386.cfg
new file mode 100644
index 0000000000..d014dbc866
--- /dev/null
+++ b/make/custom/pc386.cfg
@@ -0,0 +1,96 @@
+#
+#  Config file for the PC 386 BSP
+#
+#  $Id$
+#
+
+include $(RTEMS_ROOT)/make/custom/default.cfg
+
+RTEMS_CPU=i386
+RTEMS_CPU_MODEL=i386_fp
+
+# This is the actual bsp directory used during the build process.
+RTEMS_BSP_FAMILY=pc386
+
+#  This contains the compiler options necessary to select the CPU model
+#  and (hopefully) optimize for it. 
+#
+CPU_CFLAGS = 
+
+# optimize flag: typically -0, could use -O4 or -fast
+# -O4 is ok for RTEMS
+CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
+
+# Define this to yes if this target supports multiprocessor environments.
+HAS_MP=no
+
+# This target does NOT support the KA9Q TCP/IP stack so ignore requests
+# to enable it.
+HAS_KA9Q=no
+
+#  This section makes the target dependent options file.
+
+#  NDEBUG (C library)
+#     if defined asserts do not generate code.  This is commonly used
+#     as a command line option.
+#
+#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
+#     do not pause between screens of output in the rtems tests
+#
+#  STACK_CHECKER_ON (RTEMS support code)
+#     If defined, stack bounds checking is enabled.
+#
+#  STACK_CHECKER_REPORT_USAGE (RTEMS support code)
+#     If this and STACK_CHECKER_ON are defined, then a report on stack usage
+#     per task is printed when the program exits.
+#
+#  RTEMS_DEBUG (RTEMS)
+#     If defined, debug checks in RTEMS and support library code are enabled.
+
+define make-target-options
+	@echo "/* #define NDEBUG 1 */ "                     >>$@
+	@echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
+	@echo "/* #define STACK_CHECKER_ON  1 */"           >>$@
+	@echo "/* #define STACK_CHECKER_REPORT_USAGE  1 */" >>$@
+	@echo "/* #define RTEMS_DEBUG  1 */"                >>$@
+endef
+
+# Here is the rule to actually build a $(ARCH)/foo.exe
+# It also builds $(ARCH)/foo.sr and $(ARCH)/foo.nm
+# Usage ref: src/tests/sptest/sp1/Makefile
+
+#+--------------------------------------------------------------------------+
+#| Relocation address. Set this to the linear address where you want your code
+#| to start. It should abide to the following constraints:
+#|   RELOCADDR >= 0x10200
+#|   RELOCADDR + 'image file size' < 0xA0000
+#|   RELOCADDR % 4 = 0 (i.e. aligned on a 4 byte boundary)
+#+--------------------------------------------------------------------------+
+RELOCADDR=0x00020200
+
+# The following are definitions of make-exe which will work using ld as
+# is currently required.  It is expected that as of gcc 2.8, the end user
+# will be able to override parts of the compilers specs and link using gcc.
+
+ifeq ($(RTEMS_USE_GCC272),yes)
+define make-exe
+	$(LD) -N -T $(LINKCMDS) -Ttext $(RELOCADDR) -e start -nostdlib \
+           -o $(basename $@).elf \
+	   $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
+	$(OBJCOPY) -O binary --set-start $(RELOCADDR) $(basename $@).elf $@
+	$(PROJECT_TOOLS)/bin2boot -v $@ $(basename $@).bin -s $(RELOCADDR)
+	$(NM) -g -n $(basename $@).elf > $(basename $@).num
+	$(SIZE) $(basename $@).elf
+endef
+else
+define make-exe
+	$(CC) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).elf $(LINK_OBJS)
+	$(OBJCOPY) -O binary --set-start $(RELOCADDR) $(basename $@).elf $@
+	$(PROJECT_TOOLS)/bin2boot -v $@ $(basename $@).bin -s $(RELOCADDR)
+	$(NM) -g -n $(basename $@).elf > $(basename $@).num
+	$(SIZE) $(basename $@).elf
+endef
+endif
+
+# Miscellaneous additions go here
+
-- 
cgit v1.2.3