From b96ca5195021005117ca026a3e196bc224fcb620 Mon Sep 17 00:00:00 2001
From: Joel Sherrill <joel.sherrill@OARcorp.com>
Date: Fri, 11 Aug 2000 19:24:30 +0000
Subject: 2000-08-04	Charles-Antoine Gauthier  <charles.gauthier@nrc.ca>

	* mvme167.cfg: Add specification of printk port, console port
	and serial I/O mode.  Arrange for the stripped executable to
	be copied up the build tree.
---
 make/custom/mvme167.cfg | 56 +++++++++++++++++++++++++++----------------------
 1 file changed, 31 insertions(+), 25 deletions(-)

(limited to 'make/custom/mvme167.cfg')

diff --git a/make/custom/mvme167.cfg b/make/custom/mvme167.cfg
index f93d1cf1b2..12e0ac6664 100644
--- a/make/custom/mvme167.cfg
+++ b/make/custom/mvme167.cfg
@@ -25,28 +25,34 @@ CPU_CFLAGS = -m68040 -DRTEMS_BSP=$(RTEMS_BSP) -D$(RTEMS_BSP)
 
 # BSP specific preprocessor flags.
 # These should only be used in BSP dependent directories.
-BSP_CPPFLAGS += -DCD2401_INT_LEVEL=1 -DCD2401_POLLED_IO=1
+#
+#  CD2401_INT_LEVEL
+#	  Interrupt level for the CD2401(when CD2401_IO_MODE == 1).
+#
+#  CD2401_IO_MODE
+#	   0 for polled I/O, 1 for interrupt-driven.
+#
+#  CONSOLE_MINOR
+#	   Port to use for the RTEMS console
+#       0 - /dev/tty0, Serial Port 1/Console on the MVME712M.
+#       1 - /dev/tty1, Serial Port 2/TTY01 on the MVME712M.
+#       2 - /dev/tty2, Serial Port 3 on the MVME712M.
+#       3 - /dev/tty3, Serial Port 4 on the MVME712M.
+#
+#  PRINTK_MINOR
+#	   Port to use for printk debugging output.
+#       0 - /dev/tty0, Serial Port 1/Console on the MVME712M.
+#       1 - /dev/tty1, Serial Port 2/TTY01 on the MVME712M.
+#       2 - /dev/tty2, Serial Port 3 on the MVME712M.
+#       3 - /dev/tty3, Serial Port 4 on the MVME712M.
+
+BSP_CPPFLAGS += -DCD2401_INT_LEVEL=1 -DCD2401_IO_MODE=0 -DCD2401_USE_TERMIOS=0 -DCONSOLE_MINOR=1 -DPRINTK_MINOR=1
  
 CFLAGS_DEBUG_V += -ggdb
 
 # optimize flag: typically -O, could use -O4 or -fast
 # -O4 is ok for RTEMS
-CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
-
-#  This section makes the target dependent options file.
-
-#  CD2401_INT_LEVEL
-#	  Interrupt level for the CD2401.
-#
-#  CD2401_POLLED_IO
-#	  0 for interrupt-driven, 1 for polled I/O.
-
-define make-target-options
-#	@echo "#define CD2401_INT_LEVEL 1"                  >>$@
-#	@echo "#define CD2401_POLLED_IO 1"                  >>$@
-	
-	
-endef
+CFLAGS_OPTIMIZE_V=-O4 -fno-omit-frame-pointer
 
 # Here is the rule to actually build a $(ARCH)/foo.exe
 # It also builds $(ARCH)/foo.nm
@@ -77,19 +83,19 @@ ifeq ($(RTEMS_USE_GCC272),yes)
 # LIBGCC = $(shell $(CC) -msoft-float -print-libgcc-file-name)
 
 define make-exe
-	$(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).exe \
+	$(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@)_sym.exe \
 	    $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
-	$(NM) -g -n $(basename $@).exe > $(basename $@).nm
-	$(STRIP) -o $(basename $@) $@
-	$(SIZE) $(basename $@).exe
+	$(NM) -g -n $(basename $@)_sym.exe > $(basename $@).nm
+	$(STRIP) -o $(basename $@).exe $(basename $@)_sym.exe
+	$(SIZE) $(basename $@)_sym.exe
 endef
 else
 define make-exe
-	$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $@ \
+	$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $(basename $@)_sym.exe \
 	    $(LINK_OBJS) $(LINK_LIBS)
-	$(NM) -g -n $(basename $@).exe > $(basename $@).nm
-	$(STRIP) -o $(basename $@) $@
-	$(SIZE) $(basename $@).exe
+	$(NM) -g -n $(basename $@)_sym.exe > $(basename $@).nm
+	$(STRIP) -o $(basename $@).exe $(basename $@)_sym.exe
+	$(SIZE) $(basename $@)_sym.exe
 endef
 endif
 
-- 
cgit v1.2.3