From df49c60c9671e4a28e636964d744c1f59fb6cb68 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Mon, 12 Jun 2000 15:00:15 +0000 Subject: Merged from 4.5.0-beta3a --- make/custom/helas403.cfg | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) (limited to 'make/custom/helas403.cfg') diff --git a/make/custom/helas403.cfg b/make/custom/helas403.cfg index e78f93a954..b9e49b33ba 100644 --- a/make/custom/helas403.cfg +++ b/make/custom/helas403.cfg @@ -18,10 +18,6 @@ RTEMS_CPU_MODEL=ppc403 # This is the actual bsp directory used during the build process. RTEMS_BSP_FAMILY=helas403 -# These should be defined in targopt.h now. -#CPU_DEFINES=-DPPC_ABI=PPC_ABI_POWEROPEN \ -# -DPPC_ASM=PPC_ASM_ELF -DPPC_VECTOR_FILE_BASE=0x0100 - # This section makes the target dependent options file. # NDEBUG (C library) @@ -39,15 +35,6 @@ RTEMS_BSP_FAMILY=helas403 # This defines the base address of the exception table. # NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100 # -# PPC_ABI (PowerPC) -# This defines the calling convention (Application Binary Interface) -# used in this configuration. EABI is the only one supported. -# This BSP was initially developed using the PowerOpen ABI. -# -# PPC_ASM (PowerPC) -# This defines the assembly language format used in this configuration. -# ELF is the only one supported. -# # PPC_USE_SPRG (RTEMS PowerPC port) # If defined, then the PowerPC specific code in RTEMS will use some # of the special purpose registers to slightly optimize interrupt @@ -59,8 +46,6 @@ define make-target-options @echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@ @echo "/* #define RTEMS_DEBUG 1 */" >>$@ @echo "#define PPC_VECTOR_FILE_BASE 0x0100" >>$@ - @echo "#define PPC_ABI PPC_ABI_EABI" >>$@ - @echo "#define PPC_ASM PPC_ASM_ELF" >>$@ @echo "#define PPC_USE_SPRG 1" >>$@ endef @@ -94,7 +79,7 @@ define make-exe endef else define make-exe - $(CC) $(CPPFLAGS) $(CFLAGS) -o $(basename $@).exe \ + $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $(basename $@).exe \ $(LINK_OBJS) $(LINK_LIBS) $(NM) -g -n $@ > $(basename $@).num $(SIZE) $@ -- cgit v1.2.3