From bffb93879940c71c58d2c66410e1bd5e5e4dc979 Mon Sep 17 00:00:00 2001
From: Joel Sherrill <joel.sherrill@OARcorp.com>
Date: Tue, 20 Jan 1998 19:30:30 +0000
Subject: Removed PROJECT_HOME and CONFIG_DIR variables.

---
 make/custom/go32.cfg | 121 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 make/custom/go32.cfg

(limited to 'make/custom/go32.cfg')

diff --git a/make/custom/go32.cfg b/make/custom/go32.cfg
new file mode 100644
index 0000000000..d7c91db343
--- /dev/null
+++ b/make/custom/go32.cfg
@@ -0,0 +1,121 @@
+#
+#  Config file for the go32 BSP .. CPU model defaults to an i486DX
+#  unless set otherwise by a custom configuration file which overrides.
+#
+#  $Id$
+#
+
+# default to i486dx as cpu
+ifeq ($(RTEMS_GO32_CPU_MODEL),)
+TARGET_ARCH=o-go32_i486dx
+RTEMS_CPU_MODEL=i486dx
+else
+ifeq ($(RTEMS_GO32_CPU_MODEL),pentium)
+TARGET_ARCH=o-go32_p5
+RTEMS_CPU_MODEL=pentium
+endif # pentium
+endif # i486dx
+
+include $(RTEMS_ROOT)/make/custom/default.cfg
+
+# Sharing a single bsp among multiple cpu models results in us having to
+# explicitly set some values normally taken care of in the defaults.cfg
+# file.
+
+RTEMS_CPU=i386
+
+# This is the actual bsp directory used during the build process.
+RTEMS_BSP_FAMILY=go32
+
+## Target compiler config file, if any
+CONFIG.$(TARGET_ARCH).CC = $(RTEMS_ROOT)/make/compilers/gcc-target-default.cfg
+
+# We may install in a CPU model based directory but this is still
+# a go32 based bsp.
+RTEMS_BSP=go32
+
+#  This contains the compiler options necessary to select the CPU model
+#  and (hopefully) optimize for it. 
+#
+#  NOTE:  As gcc grows to include more options, this section should also grow.
+#
+ifeq ($(RTEMS_CPU_MODEL),i486dx)
+CPU_CFLAGS = -m486
+else
+ifeq ($(RTEMS_CPU_MODEL),pentium)
+CPU_CFLAGS = -m486
+else
+CPU_CFLAGS =
+endif   # pentium
+endif   # i486dx
+
+# optimize flag: typically -0, could use -O4 or -fast
+# -O4 is ok for RTEMS
+CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
+
+# This target does NOT support the KA9Q TCP/IP stack so ignore requests
+# to enable it.
+HAS_KA9Q=no
+
+# Base name of start file
+# go32 does not use the rtems start file
+START_BASE=
+
+#  This section makes the target dependent options file.
+
+#  NDEBUG (C library)
+#     if defined asserts do not generate code.  This is commonly used
+#     as a command line option.
+#
+#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
+#     do not pause between screens of output in the rtems tests
+#
+#  STACK_CHECKER_ON (RTEMS support code)
+#     If defined, stack bounds checking is enabled.
+#
+#  STACK_CHECKER_REPORT_USAGE (RTEMS support code)
+#     If this and STACK_CHECKER_ON are defined, then a report on stack usage
+#     per task is printed when the program exits.
+#
+#  RTEMS_DEBUG (RTEMS)
+#     If defined, debug checks in RTEMS and support library code are enabled.
+
+define make-target-options
+	@echo "/* #define NDEBUG 1 */ "                     >>$@
+	@echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
+	@echo "/* #define STACK_CHECKER_ON  1 */"           >>$@
+	@echo "/* #define STACK_CHECKER_REPORT_USAGE  1 */" >>$@
+	@echo "/* #define RTEMS_DEBUG  1 */"                >>$@
+endef
+
+# Ultimately, it would be nice to do this when in a cross environment:
+#	$(COFF2EXE) $(basename $@).out
+
+# The following are definitions of make-exe which will work using ld as
+# is currently required.  It is expected that as of gcc 2.8, the end user
+# will be able to override parts of the compilers specs and link using gcc.
+
+# may need to reference libpc.a
+
+ifeq ($(RTEMS_USE_GCC272),yes)
+define make-exe
+	$(LD) $(LDFLAGS) -N -o $(basename $@).exe \
+	    $(shell $(CC) $(CPU_CFLAGS) -print-file-name=crt0.o) \
+	    $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group \
+	    $(shell $(CC) $(CPU_CFLAGS) -print-file-name=libcgo32.a) \
+	    $(shell $(CC) $(CPU_CFLAGS) -print-file-name=libpc.a)
+	$(NM) -g -n $(basename $@).exe > $(basename $@).num
+	$(SIZE) $(basename $@).exe
+endef
+
+else
+define make-exe
+	$(CC) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).exe $(LINK_OBJS)
+	$(NM) -g -n $(basename $@).exe > $(basename $@).num
+	$(SIZE) $(basename $@).exe
+endef
+
+endif
+
+
+# Miscellaneous additions go here
-- 
cgit v1.2.3