From 4383f3a669f217b197ba6246caee4f61a311c908 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Tue, 27 Nov 2001 12:09:48 +0000 Subject: 2001-11-26 Ralf Corsepius * custom/gen405.cfg: Remove PPC_VECTOR_FILE_BASE, PPC_USE_SPRG; Remove make-target-options. * custom/helas403.cfg: Remove PPC_VECTOR_FILE_BASE, PPC_USE_SPRG; Remove make-target-options. * custom/mbx8xx.cfg: Remove INSTRUCTION_CACHE_ENABLE, DATA_CACHE_ENABLE. * custom/mbx860_005b.cfg: Remove INSTRUCTION_CACHE_ENABLE, DATA_CACHE_ENABLE. * custom/mpc8260ads.cfg: Remove INSTRUCTION_CACHE_ENABLE, DATA_CACHE_ENABLE. --- make/custom/gen405.cfg | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'make/custom/gen405.cfg') diff --git a/make/custom/gen405.cfg b/make/custom/gen405.cfg index 09d01162f8..b0cc6a6de6 100644 --- a/make/custom/gen405.cfg +++ b/make/custom/gen405.cfg @@ -19,23 +19,6 @@ RTEMS_CPU_MODEL=ppc405 # This is the actual bsp directory used during the build process. RTEMS_BSP_FAMILY=gen405 -# This section makes the target dependent options file. - -# PPC_VECTOR_FILE_BASE (PowerPC) -# This defines the base address of the exception table. -# NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100 -# -# PPC_USE_SPRG (RTEMS PowerPC port) -# If defined, then the PowerPC specific code in RTEMS will use some -# of the special purpose registers to slightly optimize interrupt -# response time. The use of these registers can conflict with -# other tools like debuggers. - -define make-target-options - @echo "#define PPC_VECTOR_FILE_BASE 0x0100" >>$@ - @echo "#define PPC_USE_SPRG 1" >>$@ -endef - # This contains the compiler options necessary to select the CPU model # and (hopefully) optimize for it. # -- cgit v1.2.3