From d0a4cad98a6e3cd76ac9fbca05c48e51bb6b4a98 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Thu, 11 May 2000 19:05:00 +0000 Subject: Added information on the location where the tools are installed. --- doc/started/binaries.t | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'doc') diff --git a/doc/started/binaries.t b/doc/started/binaries.t index 88189c7645..98d7d0681a 100644 --- a/doc/started/binaries.t +++ b/doc/started/binaries.t @@ -48,6 +48,16 @@ rpm -i rtems-base-gdb-4.18-2.i386.rpm rpm -i sparc-rtems-gdb-4.18-2.i386.rpm @end example +Upon successful completion of the above command sequence, a +C/C++ cross development toolset targetting the SPARC is +installed in @code{/opt/rtems}. In order to use this toolset, +the directory @code{/opt/rtems/bin} must be included in your +PATH. + +NOTE: This process does not install RTEMS itself, only the tools +required to build RTEMS. See @ref{Building RTEMS} for the next +step in the process. + @section Removing RPMs The following is a sample session illustrating the removal -- cgit v1.2.3