From 17a3c690be5f38e2e1ae8597cfe1d60bb2f8f1c6 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Fri, 30 May 1997 22:57:25 +0000 Subject: fixed typos --- doc/supplements/sparc/bsp.t | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'doc/supplements/sparc/bsp.t') diff --git a/doc/supplements/sparc/bsp.t b/doc/supplements/sparc/bsp.t index 78ffa3ac26..3564f1c1c4 100644 --- a/doc/supplements/sparc/bsp.t +++ b/doc/supplements/sparc/bsp.t @@ -25,8 +25,8 @@ An RTEMS Board Support Package (BSP) must be designed to support a particular processor and target board combination. This chapter presents a discussion of SPARC specific BSP issues. For more information on developing a BSP, refer to the chapter -titled Board Support Packages in the RTEMS C Applications User's -Guide. +titled Board Support Packages in the RTEMS +Applications User's Guide. @ifinfo @node Board Support Packages System Reset, Board Support Packages Processor Initialization, Board Support Packages Introduction, Board Support Packages @@ -77,8 +77,9 @@ and this is to be utilized, then it should be enabled during the reset application initialization code. In addition to the requirements described in the -Board Support Packages chapter of the C Applications User's -Manual for the reset code which is executed before the call to +Board Support Packages chapter of the @value{RTEMS-LANGUAGE} +Applications User's Manual for the reset code +which is executed before the call to rtems_initialize executive, the SPARC version has the following specific requirements: -- cgit v1.2.3