From bfad6e21edf44d2ac53b0514c98844d42006b7ae Mon Sep 17 00:00:00 2001 From: Jennifer Averett Date: Tue, 2 Dec 1997 16:02:45 +0000 Subject: Added definations for serial_per_sec, serial_rate, and serial_xon_xoff. --- doc/supplements/powerpc/cputable.t | 12 ++++++------ doc/supplements/powerpc/cputable.texi | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'doc/supplements/powerpc') diff --git a/doc/supplements/powerpc/cputable.t b/doc/supplements/powerpc/cputable.t index b5b8a51c6e..673387723a 100644 --- a/doc/supplements/powerpc/cputable.t +++ b/doc/supplements/powerpc/cputable.t @@ -131,9 +131,11 @@ indicates whether the exception vectors are located in RAM or ROM. If they are located in RAM dynamic vector installation occurs, otherwise it does not. - @item serial_per_sec -is the XXX +is the number of clock ticks per second for the PPC403 serial timer. + +@item serial_rate +is the baud rate for the PPC403 serial timer. @item serial_external_clock is a flag used by the BSP to indicate whether or not to mask in a 0x2 into @@ -141,7 +143,8 @@ the Input/Output Configuration Register (IOCR) during initialization of the PPC403 console. XXX This bit is defined as "reserved" 6-12? @item serial_xon_xoff -is the XXX +is a flag used by the BSP to indicate whether or not XON/XOFF flow control +is supported for the PPC403 serial timer. @item serial_cts_rts is a flag used by the BSP to indicate whether or not to set the lsb of the @@ -149,9 +152,6 @@ Input/Output Configuration Register (IOCR) during initialization of the PPC403 console. XXX This bit is defined as "reserved" 6-12? -@item serial_rate -is the XXX - @item timer_average_overhead is the average number of overhead ticks that occur on the PPC403 timer. diff --git a/doc/supplements/powerpc/cputable.texi b/doc/supplements/powerpc/cputable.texi index b5b8a51c6e..673387723a 100644 --- a/doc/supplements/powerpc/cputable.texi +++ b/doc/supplements/powerpc/cputable.texi @@ -131,9 +131,11 @@ indicates whether the exception vectors are located in RAM or ROM. If they are located in RAM dynamic vector installation occurs, otherwise it does not. - @item serial_per_sec -is the XXX +is the number of clock ticks per second for the PPC403 serial timer. + +@item serial_rate +is the baud rate for the PPC403 serial timer. @item serial_external_clock is a flag used by the BSP to indicate whether or not to mask in a 0x2 into @@ -141,7 +143,8 @@ the Input/Output Configuration Register (IOCR) during initialization of the PPC403 console. XXX This bit is defined as "reserved" 6-12? @item serial_xon_xoff -is the XXX +is a flag used by the BSP to indicate whether or not XON/XOFF flow control +is supported for the PPC403 serial timer. @item serial_cts_rts is a flag used by the BSP to indicate whether or not to set the lsb of the @@ -149,9 +152,6 @@ Input/Output Configuration Register (IOCR) during initialization of the PPC403 console. XXX This bit is defined as "reserved" 6-12? -@item serial_rate -is the XXX - @item timer_average_overhead is the average number of overhead ticks that occur on the PPC403 timer. -- cgit v1.2.3