From 0689ac5b005456d31e2fc208737173cac9291342 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Tue, 2 May 2000 13:16:06 +0000 Subject: Modified to correct references to gmake per comment from Stephan Wilms . --- doc/started/buildrt.t | 4 ++-- doc/started/gdb.t | 9 ++++++--- doc/started/nt.t | 2 +- 3 files changed, 9 insertions(+), 6 deletions(-) (limited to 'doc/started') diff --git a/doc/started/buildrt.t b/doc/started/buildrt.t index eaf7af70f5..e3d70efcab 100644 --- a/doc/started/buildrt.t +++ b/doc/started/buildrt.t @@ -124,7 +124,7 @@ cd build-rtems --disable-posix --disable-tcpip --disable-cxx \ --enable-rtemsbsp=\ --prefix= -gmake all install +make all install @end example Where the list of currently supported of 's and @@ -134,4 +134,4 @@ tools/@value{RTEMS-UNTAR}/README.configure. is the installation point from the previous step "Modify the bit script" in the build of the tools. - +NOTE: The @code{make} utility used should be GNU make. diff --git a/doc/started/gdb.t b/doc/started/gdb.t index 1052315875..57f3bb1981 100644 --- a/doc/started/gdb.t +++ b/doc/started/gdb.t @@ -135,9 +135,10 @@ with SIS will be created. From tools/build-sis execute the following command sequence: @example -gmake all install +make all install @end example +NOTE: The @code{make} utility used should be GNU make. @subsection GDB with PowerPC Instruction Simulator @@ -177,9 +178,10 @@ with PSIM will be created. From tools/build-ppc execute the following command sequence: @example -gmake all install +make all install @end example +NOTE: The @code{make} utility used should be GNU make. @subsection GDB for DINK32 @@ -213,6 +215,7 @@ gdb Dink32 will be created. From tools/build-dink32 execute the following command sequence: @example -gmake all install +make all install @end example +NOTE: The @code{make} utility used should be GNU make. diff --git a/doc/started/nt.t b/doc/started/nt.t index c1805f3c34..7e364b2446 100644 --- a/doc/started/nt.t +++ b/doc/started/nt.t @@ -30,7 +30,7 @@ Please be careful when following these instructions. This installation process works well under Windows NT. Using Windows 95 or 98 is not recommended although it -should be possible with version 3.77 of gmake and an updated +should be possible with version 3.77 of GNU make and an updated cygwinb19.dll. This procedure should also work with newer version of -- cgit v1.2.3