From 48a7fa31f918a6fc88719b3c9393a9ba2829f42a Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Tue, 15 Nov 2016 10:37:59 -0600 Subject: Remove texinfo format documentation. Replaced by Sphinx formatted documentation. closes #2812. --- doc/porting/preface.texi | 37 ------------------------------------- 1 file changed, 37 deletions(-) delete mode 100644 doc/porting/preface.texi (limited to 'doc/porting/preface.texi') diff --git a/doc/porting/preface.texi b/doc/porting/preface.texi deleted file mode 100644 index dfdcfbc1f8..0000000000 --- a/doc/porting/preface.texi +++ /dev/null @@ -1,37 +0,0 @@ -@c -@c COPYRIGHT (c) 1989-2011. -@c On-Line Applications Research Corporation (OAR). -@c All rights reserved. - -@node Preface, Development Tools, Top, Top -@unnumbered Preface - -The purpose of this manual is to provide a roadmap to those people porting -RTEMS to a new CPU family. This process includes a variety of activities -including the following: - -@itemize @bullet - -@item targeting the GNU development tools - -@item porting the RTEMS executive code - -@item developing a Board Support Package - -@item writing an RTEMS CPU Supplement manual for the completed port. - -@end itemize - -This document focuses on the process of actually porting the RTEMS -executive code proper. Each of the data structures, routines, and macro -definitions required of a port of RTEMS is described in this document. - -Porting any operating system, including RTEMS, requires knowledge of the -operating system, target CPU architecture, and debug environment. It is -very desirable to have a CPU simulator or hardware emulator when debugging -the port. This manual assumes that the user is familiar with building and -using RTEMS, the C programming language, and the target CPU architecture. -It is desirable to be familiar with the assembly language for the target -CPU family but since only a limited amount of assembly is required to port -RTEMS. - -- cgit v1.2.3