From 990458b684d60cc1145ff78b3599f77f8882aa56 Mon Sep 17 00:00:00 2001 From: Chris Johns Date: Sat, 29 Mar 2008 05:01:30 +0000 Subject: 2008-03-29 Chris Johns * networking/testing.t: Cleaned up the patch from Ian. --- doc/networking/testing.t | 52 +++++++++++++++++++++++++++++------------------- 1 file changed, 32 insertions(+), 20 deletions(-) (limited to 'doc/networking') diff --git a/doc/networking/testing.t b/doc/networking/testing.t index 6e41c42e06..fa7c78d38a 100644 --- a/doc/networking/testing.t +++ b/doc/networking/testing.t @@ -106,9 +106,11 @@ is a list of them: This command shows the current routing information for the TCP/IP stack. Following is an example showing the output of this command. -@code{Destination Gateway/Mask/Hw Flags Refs Use Expire Interface +@example +Destination Gateway/Mask/Hw Flags Refs Use Expire Interface 10.0.0.0 255.0.0.0 U 0 0 17 smc1 -127.0.0.1 127.0.0.1 UH 0 0 0 lo0} +127.0.0.1 127.0.0.1 UH 0 0 0 lo0 +@end example In this example, there is only one network interface with an IP address of 10.8.1.1. This link is currently not up. @@ -118,48 +120,58 @@ loopback interface (127.0.0.1). Since the stack comes from BSD, this command is very similar to the netstat command. For more details on the network routing please look the following -URL: (@code{http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-routing.html}) +URL: (@url{http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-routing.html}) For a quick reference to the flags, see the table below: -U Up: The route is active. -H Host: The route destination is a single host. -G Gateway: Send anything for this destination on to this remote - system, which will figure out from there where to send it. -S Static: This route was configured manually, not automatically - generated by the system. -C Clone: Generates a new route based upon this route for machines - we connect to. This type of route is normally used for local - networks. -W WasCloned: Indicated a route that was auto-configured based upon - a local area network (Clone) route. -L Link: Route involves references to Ethernet hardware. +@table @samp +@item U +Up: The route is active. +@item H +Host: The route destination is a single host. +@item G +Gateway: Send anything for this destination on to this remote system, which +will figure out from there where to send it. +@item S +Static: This route was configured manually, not automatically generated by the +system. +@item C +Clone: Generates a new route based upon this route for machines we connect +to. This type of route is normally used for local networks. +@item W +WasCloned: Indicated a route that was auto-configured based upon a local area +network (Clone) route. +@item L +Link: Route involves references to Ethernet hardware. +@end table @item @code{mbuf} This command shows the current MBUF statistics. An example of the command is shown below: -@code{************ MBUF STATISTICS ************ +@example +************ MBUF STATISTICS ************ mbufs:4096 clusters: 256 free: 241 drops: 0 waits: 0 drains: 0 free:4080 data:16 header:0 socket:0 pcb:0 rtable:0 htable:0 atable:0 soname:0 soopts:0 ftable:0 rights:0 ifaddr:0 control:0 oobdata:0 -} +@end example @item @code{if} This command shows the current statistics for your Ethernet driver as long as the ioctl hook @code{SIO_RTEMS_SHOW_STATS} has been implemented. Below is an example: -@code{************ INTERFACE STATISTICS ************ +@example +************ INTERFACE STATISTICS ************ ***** smc1 ***** Ethernet Address: 00:12:76:43:34:25 Address:10.8.1.1 Broadcast Address:10.255.255.255 Net mask:255.0.0.0 Flags: Up Broadcast Running Simplex Send queue limit:50 length:0 Dropped:0 -SMC91C111 RTEMS driver A0.01 11/03/2002 Ian Caddy (ianc@microsol.iinet.net.au) +SMC91C111 RTEMS driver A0.01 11/03/2002 Ian Caddy (ianc@@microsol.iinet.net.au) Rx Interrupts:0 Not First:0 Not Last:0 Giant:0 Runt:0 Non-octet:0 Bad CRC:0 Overrun:0 Collision:0 @@ -171,7 +183,7 @@ SMC91C111 RTEMS driver A0.01 11/03/2002 Ian Caddy (ianc@microsol.iinet.net.au) Address:127.0.0.1 Net mask:255.0.0.0 Flags: Up Loopback Running Multicast Send queue limit:50 length:0 Dropped:0 -} +@end example @item @code{ip} -- cgit v1.2.3