From c62d36feed16c25aefa8e85de0944f1bff0e7bdf Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Fri, 6 Oct 1995 20:01:20 +0000 Subject: SPARC merged and successfully tested w/o interrupt support --- cpukit/score/cpu/i386/cpu.c | 1 - cpukit/score/cpu/sparc/asm.h | 97 ++++++++++++++++++ cpukit/score/cpu/sparc/cpu.c | 197 +++++++++++++++++++++++++++++++++++++ cpukit/score/cpu/sparc/rtems/asm.h | 97 ++++++++++++++++++ 4 files changed, 391 insertions(+), 1 deletion(-) create mode 100644 cpukit/score/cpu/sparc/asm.h create mode 100644 cpukit/score/cpu/sparc/cpu.c create mode 100644 cpukit/score/cpu/sparc/rtems/asm.h (limited to 'cpukit/score') diff --git a/cpukit/score/cpu/i386/cpu.c b/cpukit/score/cpu/i386/cpu.c index 917cf042a9..ad9c56e20a 100644 --- a/cpukit/score/cpu/i386/cpu.c +++ b/cpukit/score/cpu/i386/cpu.c @@ -15,7 +15,6 @@ #include #include -#include /* _CPU_Initialize * diff --git a/cpukit/score/cpu/sparc/asm.h b/cpukit/score/cpu/sparc/asm.h new file mode 100644 index 0000000000..10157171c5 --- /dev/null +++ b/cpukit/score/cpu/sparc/asm.h @@ -0,0 +1,97 @@ +/* asm.h + * + * This include file attempts to address the problems + * caused by incompatible flavors of assemblers and + * toolsets. It primarily addresses variations in the + * use of leading underscores on symbols and the requirement + * that register names be preceded by a %. + * + * + * NOTE: The spacing in the use of these macros + * is critical to them working as advertised. + * + * COPYRIGHT: + * + * This file is based on similar code found in newlib available + * from ftp.cygnus.com. The file which was used had no copyright + * notice. This file is freely distributable as long as the source + * of the file is noted. + * + * $Id$ + */ + +#ifndef __SPARC_ASM_h +#define __SPARC_ASM_h + +/* + * Indicate we are in an assembly file and get the basic CPU definitions. + */ + +#define ASM +#include + +/* + * Recent versions of GNU cpp define variables which indicate the + * need for underscores and percents. If not using GNU cpp or + * the version does not support this, then you will obviously + * have to define these as appropriate. + */ + +/* XXX This does not appear to work on gcc 2.7.0 on the sparc */ +#undef __USER_LABEL_PREFIX__ +#ifndef __USER_LABEL_PREFIX__ +#define __USER_LABEL_PREFIX__ _ +#endif + +#ifndef __REGISTER_PREFIX__ +#define __REGISTER_PREFIX__ +#endif + +/* ANSI concatenation macros. */ + +#define CONCAT1(a, b) CONCAT2(a, b) +#define CONCAT2(a, b) a ## b + +/* Use the right prefix for global labels. */ + +#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) + +/* Use the right prefix for registers. */ + +#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) + +/* + * define macros for all of the registers on this CPU + * + * EXAMPLE: #define d0 REG (d0) + */ + +/* + * Define macros to handle section beginning and ends. + */ + + +#define BEGIN_CODE_DCL .text +#define END_CODE_DCL +#define BEGIN_DATA_DCL .data +#define END_DATA_DCL +#define BEGIN_CODE .text +#define END_CODE +#define BEGIN_DATA +#define END_DATA +#define BEGIN_BSS +#define END_BSS +#define END + +/* + * Following must be tailor for a particular flavor of the C compiler. + * They may need to put underscores in front of the symbols. + */ + +#define PUBLIC(sym) .globl SYM (sym) +#define EXTERN(sym) .globl SYM (sym) + +#endif +/* end of include file */ + + diff --git a/cpukit/score/cpu/sparc/cpu.c b/cpukit/score/cpu/sparc/cpu.c new file mode 100644 index 0000000000..cf70913d5e --- /dev/null +++ b/cpukit/score/cpu/sparc/cpu.c @@ -0,0 +1,197 @@ +/* + * SPARC Dependent Source + * + * $Id$ + */ + +#include +#include + +/* _CPU_Initialize + * + * This routine performs processor dependent initialization. + * + * INPUT PARAMETERS: + * cpu_table - CPU table to initialize + * thread_dispatch - address of disptaching routine + */ + + +void _CPU_Initialize( + rtems_cpu_table *cpu_table, + void (*thread_dispatch) /* ignored on this CPU */ +) +{ + void *pointer; + + /* + * The thread_dispatch argument is the address of the entry point + * for the routine called at the end of an ISR once it has been + * decided a context switch is necessary. On some compilation + * systems it is difficult to call a high-level language routine + * from assembly. This allows us to trick these systems. + * + * If you encounter this problem save the entry point in a CPU + * dependent variable. + */ + + _CPU_Thread_dispatch_pointer = thread_dispatch; + + /* + * If there is not an easy way to initialize the FP context + * during Context_Initialize, then it is usually easier to + * save an "uninitialized" FP context here and copy it to + * the task's during Context_Initialize. + */ + + pointer = &_CPU_Null_fp_context; + _CPU_Context_save_fp( &pointer ); + + _CPU_Table = *cpu_table; +} + +/*PAGE + * + * _CPU_ISR_Get_level + */ + +unsigned32 _CPU_ISR_Get_level( void ) +{ + unsigned32 level; + + sparc_get_interrupt_level( level ); + + return level; +} + +/* _CPU_ISR_install_vector + * + * This kernel routine installs the RTEMS handler for the + * specified vector. + * + * Input parameters: + * vector - interrupt vector number + * old_handler - former ISR for this vector number + * new_handler - replacement ISR for this vector number + * + * Output parameters: NONE + * + */ + + +void _CPU_ISR_install_vector( + unsigned32 vector, + proc_ptr new_handler, + proc_ptr *old_handler +) +{ + *old_handler = _ISR_Vector_table[ vector ]; + + /* + * If the interrupt vector table is a table of pointer to isr entry + * points, then we need to install the appropriate RTEMS interrupt + * handler for this vector number. + */ + + /* + * We put the actual user ISR address in '_ISR_vector_table'. This will + * be used by the _ISR_Handler so the user gets control. + */ + + _ISR_Vector_table[ vector ] = new_handler; +} + +/*PAGE + * + * _CPU_Install_interrupt_stack + */ + +void _CPU_Install_interrupt_stack( void ) +{ +} + +/*PAGE + * + * _CPU_Context_Initialize + */ + +/* + * The following constants assist in building a thread's initial context. + */ + +#define CPU_FRAME_SIZE (112) /* based on disassembled test code */ +#define ADDR_ADJ_OFFSET -8 + +void _CPU_Context_Initialize( + Context_Control *_the_context, + unsigned32 *_stack_base, + unsigned32 _size, + unsigned32 _new_level, + void *_entry_point +) +{ + unsigned32 jmp_addr; + unsigned32 _stack_high; /* highest "stack aligned" address */ + unsigned32 _the_size; + unsigned32 tmp_psr; + + jmp_addr = (unsigned32) _entry_point; + + /* + * On CPUs with stacks which grow down (i.e. SPARC), we build the stack + * based on the _stack_high address. + */ + + _stack_high = ((unsigned32)(_stack_base) + _size); + _stack_high &= ~(CPU_STACK_ALIGNMENT - 1); + + _the_size = _size & ~(CPU_STACK_ALIGNMENT - 1); + +/* XXX following code is based on unix port */ + /* + * XXX SPARC port needs a diagram like this one... + * See /usr/include/sys/stack.h in Solaris 2.3 for a nice + * diagram of the stack. + */ + + _the_context->o7 = jmp_addr + ADDR_ADJ_OFFSET; + _the_context->o6 = (unsigned32)(_stack_high - CPU_FRAME_SIZE); + _the_context->i6 = (unsigned32)(_stack_high); +#if 0 + _the_context->rp = jmp_addr + ADDR_ADJ_OFFSET; + _the_context->sp = (unsigned32)(_stack_high - CPU_FRAME_SIZE); + _the_context->fp = (unsigned32)(_stack_high); +#endif + + _the_context->wim = 0x01; + + sparc_get_psr( tmp_psr ); + tmp_psr &= ~SPARC_PIL_MASK; + tmp_psr |= (((_new_level) << 8) & SPARC_PIL_MASK); + tmp_psr = (tmp_psr & ~0x07) | 0x07; /* XXX should use num windows */ + _the_context->psr = tmp_psr; +} + +/*PAGE + * + * _CPU_Internal_threads_Idle_thread_body + * + * NOTES: + * + * 1. This is the same as the regular CPU independent algorithm. + * + * 2. If you implement this using a "halt", "idle", or "shutdown" + * instruction, then don't forget to put it in an infinite loop. + * + * 3. Be warned. Some processors with onboard DMA have been known + * to stop the DMA if the CPU were put in IDLE mode. This might + * also be a problem with other on-chip peripherals. So use this + * hook with caution. + */ + +void _CPU_Internal_threads_Idle_thread_body( void ) +{ + + for( ; ; ) + /* insert your "halt" instruction here */ ; +} diff --git a/cpukit/score/cpu/sparc/rtems/asm.h b/cpukit/score/cpu/sparc/rtems/asm.h new file mode 100644 index 0000000000..10157171c5 --- /dev/null +++ b/cpukit/score/cpu/sparc/rtems/asm.h @@ -0,0 +1,97 @@ +/* asm.h + * + * This include file attempts to address the problems + * caused by incompatible flavors of assemblers and + * toolsets. It primarily addresses variations in the + * use of leading underscores on symbols and the requirement + * that register names be preceded by a %. + * + * + * NOTE: The spacing in the use of these macros + * is critical to them working as advertised. + * + * COPYRIGHT: + * + * This file is based on similar code found in newlib available + * from ftp.cygnus.com. The file which was used had no copyright + * notice. This file is freely distributable as long as the source + * of the file is noted. + * + * $Id$ + */ + +#ifndef __SPARC_ASM_h +#define __SPARC_ASM_h + +/* + * Indicate we are in an assembly file and get the basic CPU definitions. + */ + +#define ASM +#include + +/* + * Recent versions of GNU cpp define variables which indicate the + * need for underscores and percents. If not using GNU cpp or + * the version does not support this, then you will obviously + * have to define these as appropriate. + */ + +/* XXX This does not appear to work on gcc 2.7.0 on the sparc */ +#undef __USER_LABEL_PREFIX__ +#ifndef __USER_LABEL_PREFIX__ +#define __USER_LABEL_PREFIX__ _ +#endif + +#ifndef __REGISTER_PREFIX__ +#define __REGISTER_PREFIX__ +#endif + +/* ANSI concatenation macros. */ + +#define CONCAT1(a, b) CONCAT2(a, b) +#define CONCAT2(a, b) a ## b + +/* Use the right prefix for global labels. */ + +#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) + +/* Use the right prefix for registers. */ + +#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) + +/* + * define macros for all of the registers on this CPU + * + * EXAMPLE: #define d0 REG (d0) + */ + +/* + * Define macros to handle section beginning and ends. + */ + + +#define BEGIN_CODE_DCL .text +#define END_CODE_DCL +#define BEGIN_DATA_DCL .data +#define END_DATA_DCL +#define BEGIN_CODE .text +#define END_CODE +#define BEGIN_DATA +#define END_DATA +#define BEGIN_BSS +#define END_BSS +#define END + +/* + * Following must be tailor for a particular flavor of the C compiler. + * They may need to put underscores in front of the symbols. + */ + +#define PUBLIC(sym) .globl SYM (sym) +#define EXTERN(sym) .globl SYM (sym) + +#endif +/* end of include file */ + + -- cgit v1.2.3