From f6a8663ec590a07d0a65c7305bacec0f9534775e Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Sat, 26 Dec 2015 10:58:25 -0600 Subject: Remove H8300 port updates #2452. --- cpukit/score/cpu/h8300/Makefile.am | 19 - cpukit/score/cpu/h8300/README | 27 - cpukit/score/cpu/h8300/cpu.c | 134 --- cpukit/score/cpu/h8300/cpu_asm.S | 221 ---- .../score/cpu/h8300/h8300-exception-frame-print.c | 24 - cpukit/score/cpu/h8300/preinstall.am | 45 - cpukit/score/cpu/h8300/rtems/asm.h | 118 -- cpukit/score/cpu/h8300/rtems/score/cpu.h | 1176 -------------------- cpukit/score/cpu/h8300/rtems/score/cpuatomic.h | 14 - cpukit/score/cpu/h8300/rtems/score/h8300.h | 44 - cpukit/score/cpu/h8300/rtems/score/types.h | 47 - 11 files changed, 1869 deletions(-) delete mode 100644 cpukit/score/cpu/h8300/Makefile.am delete mode 100644 cpukit/score/cpu/h8300/README delete mode 100644 cpukit/score/cpu/h8300/cpu.c delete mode 100644 cpukit/score/cpu/h8300/cpu_asm.S delete mode 100644 cpukit/score/cpu/h8300/h8300-exception-frame-print.c delete mode 100644 cpukit/score/cpu/h8300/preinstall.am delete mode 100644 cpukit/score/cpu/h8300/rtems/asm.h delete mode 100644 cpukit/score/cpu/h8300/rtems/score/cpu.h delete mode 100644 cpukit/score/cpu/h8300/rtems/score/cpuatomic.h delete mode 100644 cpukit/score/cpu/h8300/rtems/score/h8300.h delete mode 100644 cpukit/score/cpu/h8300/rtems/score/types.h (limited to 'cpukit/score/cpu/h8300') diff --git a/cpukit/score/cpu/h8300/Makefile.am b/cpukit/score/cpu/h8300/Makefile.am deleted file mode 100644 index 6a80409fe1..0000000000 --- a/cpukit/score/cpu/h8300/Makefile.am +++ /dev/null @@ -1,19 +0,0 @@ -include $(top_srcdir)/automake/compile.am - -include_rtemsdir = $(includedir)/rtems -include_rtems_HEADERS = rtems/asm.h - -include_rtems_scoredir = $(includedir)/rtems/score -include_rtems_score_HEADERS = rtems/score/cpu.h -include_rtems_score_HEADERS += rtems/score/h8300.h -include_rtems_score_HEADERS += rtems/score/types.h -include_rtems_score_HEADERS += rtems/score/cpuatomic.h - -noinst_LIBRARIES = libscorecpu.a -libscorecpu_a_SOURCES = cpu.c cpu_asm.S -libscorecpu_a_SOURCES += ../no_cpu/cpucounterread.c -libscorecpu_a_SOURCES += h8300-exception-frame-print.c -libscorecpu_a_CPPFLAGS = $(AM_CPPFLAGS) - -include $(srcdir)/preinstall.am -include $(top_srcdir)/automake/local.am diff --git a/cpukit/score/cpu/h8300/README b/cpukit/score/cpu/h8300/README deleted file mode 100644 index 1fed837fc8..0000000000 --- a/cpukit/score/cpu/h8300/README +++ /dev/null @@ -1,27 +0,0 @@ - -This port was done by Philip Quaife of Q Solutions -using RTEMS 3.5.1 under DOS and Hiview. Philip used an H8300H -to develop and test this port. - -It was updated to 4.5 and merged into the main development trunk -by Joel Sherrill . As part of the merger, the -port was made to conditionally compile for the H8, H8300H, and H8300S -series. - -The status of each CPU subfamily is as follows. - -H8 - Although RTEMS compiles with for these CPUs, it does not - truly support them. All code that will not work on these - CPUs is conditionally disabled. These CPUs have a 16-bit - address space. Thus although a port is technically - feasible, some work will to be performed on RTEMS to - further minimize its footprint and address pointer - manipulation issues. - -H8H - Port was developed on this class of H8 so there should be - no problems. - -H8S - Port should work on this class of H8 but it is untested. - ---joel -28 June 2000 diff --git a/cpukit/score/cpu/h8300/cpu.c b/cpukit/score/cpu/h8300/cpu.c deleted file mode 100644 index 36c41a256a..0000000000 --- a/cpukit/score/cpu/h8300/cpu.c +++ /dev/null @@ -1,134 +0,0 @@ -/** - * @file - * - * @brief H8300 CPU Dependent Source - */ - -/* - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include -#include -#include - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: NONE - */ - - -void _CPU_Initialize(void) -{ - /* - * If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* FP context initialization support goes here */ -} - -uint32_t _CPU_ISR_Get_level( void ) -{ - unsigned int _ccr; - -#if defined(__H8300__) -#warning "How do we get ccr on base CPU models" -#else - __asm__ volatile ( "stc ccr, %0" : "=m" (_ccr) : ); -#endif - - if ( _ccr & 0x80 ) - return 1; - return 0; -} - -/* - * _CPU_ISR_install_raw_handler - */ - -void _CPU_ISR_install_raw_handler( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is where we install the interrupt handler into the "raw" interrupt - * table used by the CPU to dispatch interrupt handlers. - * Use Debug level IRQ Handlers - */ - H8BD_Install_IRQ(vector,new_handler,old_handler); -} - -void _CPU_ISR_install_vector( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - _CPU_ISR_install_raw_handler( vector, new_handler, old_handler ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; -} - -/* - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -} - -/* - * _CPU_Thread_Idle_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -#if 0 -void *_CPU_Thread_Idle_body( uintptr_t ignored ) -{ - - for( ; ; ) - IDLE_Monitor(); - /* __asm__ (" sleep \n"); */ - /* insert your "halt" instruction here */ ; -} -#endif diff --git a/cpukit/score/cpu/h8300/cpu_asm.S b/cpukit/score/cpu/h8300/cpu_asm.S deleted file mode 100644 index e0fdf0a252..0000000000 --- a/cpukit/score/cpu/h8300/cpu_asm.S +++ /dev/null @@ -1,221 +0,0 @@ -/* - * Hitachi H8 Score CPU functions - * Copyright Comnet Technologies Ltd 1999 - * - * Based on example code and other ports with this copyright: - * - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include -#include - -;.equ RUNCONTEXT_ARG, er0 -;.equ HEIRCONTEXT_ARG, er1 - -/* - * Make sure we tell the assembler what type of CPU model we are - * being compiled for. - */ - -#if defined(__H8300H__) - .h8300h -#endif -#if defined(__H8300S__) - .h8300s -#endif -#if defined(__H8300SX__) - .h8300sx -#endif - .text - - .text -/* - GCC Compiled with optimisations and Wimplicit decs to ensure - that stack from doesn't change - - Supposedly R2 and R3 do not need to be saved but who knows - - Arg1 = er0 (not on stack) - Arg2 = er1 (not on stack) -*/ - - .align 2 - - .global SYM(_CPU_Context_switch) - -SYM(_CPU_Context_switch): - /* Save Context */ -#if defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) - stc.w ccr,@(0:16,er0) - mov.l er7,@(2:16,er0) - mov.l er6,@(6:16,er0) - mov.l er5,@(10:16,er0) - mov.l er4,@(14:16,er0) - mov.l er3,@(18:16,er0) - mov.l er2,@(22:16,er0) - - /* Install New context */ - -restore: - mov.l @(22:16,er1),er2 - mov.l @(18:16,er1),er3 - mov.l @(14:16,er1),er4 - mov.l @(10:16,er1),er5 - mov.l @(6:16,er1),er6 - mov.l @(2:16,er1),er7 - ldc.w @(0:16,er1),ccr -#endif - - rts - - .align 2 - - .global SYM(_CPU_Context_restore) - -SYM(_CPU_Context_restore): - -#if defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) - mov.l er0,er1 - jmp @restore:24 -#endif - - - -/* - VHandler for Vectored Interrupts - - All IRQ's are vectored to routine _ISR_#vector_number - This routine stacks er0 and loads er0 with vector number - before transferring to here - -*/ - .align 2 - .global SYM(_ISR_Handler) - .extern SYM(_Vector_table) - - -SYM(_ISR_Handler): -#if defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) - mov.l er1,@-er7 - mov.l er2,@-er7 - mov.l er3,@-er7 - mov.l er4,@-er7 - mov.l er5,@-er7 - mov.l er6,@-er7 - -/* Set IRQ Stack */ - orc #0xc0,ccr - mov.l er7,er6 ; save stack pointer - mov.l @ISR_NEST_LEVEL,er1 - bne nested - mov.l @INTERRUPT_STACK_HIGH,er7 - -nested: - mov.l er6,@-er7 ; save sp so pop regardless of nest level - -;; Inc system counters - mov.l @ISR_NEST_LEVEL,er1 - inc.l #1,er1 - mov.l er1,@ISR_NEST_LEVEL - mov.l @THREAD_DISPATCH_DISABLE_LEVEL,er1 - inc.l #1,er1 - mov.l er1,@THREAD_DISPATCH_DISABLE_LEVEL - -/* Vector to ISR */ - - mov er0,er2 ; copy vector - shll.l er2 - shll.l er2 ; vector = vector * 4 (sizeof(int)) - mov.l @(SYM(_ISR_Vector_table), er2),er1 - jsr @er1 ; er0 = arg1 =vector - - orc #0xc0,ccr - mov.l @ISR_NEST_LEVEL,er1 - dec.l #1,er1 - mov.l er1,@ISR_NEST_LEVEL - mov.l @THREAD_DISPATCH_DISABLE_LEVEL,er1 - dec.l #1,er1 - mov.l er1,@THREAD_DISPATCH_DISABLE_LEVEL - bne exit - - mov.l @DISPATCH_NEEDED,er1 - beq exit ; If no then exit - - /* Context switch here through ISR_Dispatch */ -bframe: - orc #0xc0,ccr -/* Pop Stack */ - mov @er7+,er6 - mov er6,er7 - - /* Set up IRQ stack frame and dispatch to _ISR_Dispatch */ - - mov.l #0xc0000000,er2 /* Disable IRQ */ - or.l #SYM(_ISR_Dispatch),er2 - mov.l er2,@-er7 - rte - -/* Inner IRQ Return, pop flags and return */ -exit: -/* Pop Stack */ - orc #0x80,ccr - mov @er7+,er6 - mov er6,er7 - mov @er7+,er6 - mov @er7+,er5 - mov @er7+,er4 - mov @er7+,er3 - mov @er7+,er2 - mov @er7+,er1 - mov @er7+,er0 -#endif - rte - -/* - Called from ISR_Handler as a way of ending IRQ - but allowing dispatch to another task. - Must use RTE as CCR is still on stack but IRQ has been serviced. - CCR and PC occupy same word so rte can be used. - now using task stack -*/ - - .align 2 - .global SYM(_ISR_Dispatch) - -SYM(_ISR_Dispatch): - -#if defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) - jsr @SYM(_Thread_Dispatch) - mov @er7+,er6 - mov @er7+,er5 - mov @er7+,er4 - mov @er7+,er3 - mov @er7+,er2 - mov @er7+,er1 - mov @er7+,er0 -#endif - rte - - - .align 2 - .global SYM(_CPU_Context_save_fp) - -SYM(_CPU_Context_save_fp): - rts - - - .align 2 - .global SYM(_CPU_Context_restore_fp) - -SYM(_CPU_Context_restore_fp): - rts diff --git a/cpukit/score/cpu/h8300/h8300-exception-frame-print.c b/cpukit/score/cpu/h8300/h8300-exception-frame-print.c deleted file mode 100644 index 71e7e1c516..0000000000 --- a/cpukit/score/cpu/h8300/h8300-exception-frame-print.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (c) 2012 embedded brains GmbH. All rights reserved. - * - * embedded brains GmbH - * Obere Lagerstr. 30 - * 82178 Puchheim - * Germany - * - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifdef HAVE_CONFIG_H - #include "config.h" -#endif - -#include - -void _CPU_Exception_frame_print( const CPU_Exception_frame *frame ) -{ - /* TODO */ -} diff --git a/cpukit/score/cpu/h8300/preinstall.am b/cpukit/score/cpu/h8300/preinstall.am deleted file mode 100644 index f3c1681c10..0000000000 --- a/cpukit/score/cpu/h8300/preinstall.am +++ /dev/null @@ -1,45 +0,0 @@ -## Automatically generated by ampolish3 - Do not edit - -if AMPOLISH3 -$(srcdir)/preinstall.am: Makefile.am - $(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am -endif - -PREINSTALL_DIRS = -DISTCLEANFILES = $(PREINSTALL_DIRS) - -all-am: $(PREINSTALL_FILES) - -PREINSTALL_FILES = -CLEANFILES = $(PREINSTALL_FILES) - -$(PROJECT_INCLUDE)/rtems/$(dirstamp): - @$(MKDIR_P) $(PROJECT_INCLUDE)/rtems - @: > $(PROJECT_INCLUDE)/rtems/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_INCLUDE)/rtems/$(dirstamp) - -$(PROJECT_INCLUDE)/rtems/asm.h: rtems/asm.h $(PROJECT_INCLUDE)/rtems/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/rtems/asm.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/asm.h - -$(PROJECT_INCLUDE)/rtems/score/$(dirstamp): - @$(MKDIR_P) $(PROJECT_INCLUDE)/rtems/score - @: > $(PROJECT_INCLUDE)/rtems/score/$(dirstamp) -PREINSTALL_DIRS += $(PROJECT_INCLUDE)/rtems/score/$(dirstamp) - -$(PROJECT_INCLUDE)/rtems/score/cpu.h: rtems/score/cpu.h $(PROJECT_INCLUDE)/rtems/score/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/rtems/score/cpu.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/score/cpu.h - -$(PROJECT_INCLUDE)/rtems/score/h8300.h: rtems/score/h8300.h $(PROJECT_INCLUDE)/rtems/score/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/rtems/score/h8300.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/score/h8300.h - -$(PROJECT_INCLUDE)/rtems/score/types.h: rtems/score/types.h $(PROJECT_INCLUDE)/rtems/score/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/rtems/score/types.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/score/types.h - -$(PROJECT_INCLUDE)/rtems/score/cpuatomic.h: rtems/score/cpuatomic.h $(PROJECT_INCLUDE)/rtems/score/$(dirstamp) - $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/rtems/score/cpuatomic.h -PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/score/cpuatomic.h - diff --git a/cpukit/score/cpu/h8300/rtems/asm.h b/cpukit/score/cpu/h8300/rtems/asm.h deleted file mode 100644 index 6c1a643db4..0000000000 --- a/cpukit/score/cpu/h8300/rtems/asm.h +++ /dev/null @@ -1,118 +0,0 @@ -/** - * @file - * - * @brief Address the Problems Caused by Incompatible Flavor of - * Assemblers and Toolsets - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - */ - -/* - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef _RTEMS_ASM_H -#define _RTEMS_ASM_H - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#include - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -#include - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ -#define r0 REG(r0) -#define r1 REG(r1) -#define r2 REG(r2) -#define r3 REG(r3) -#define r4 REG(r4) -#define r5 REG(r5) -#define r6 REG(r6) -#define r7 REG(r7) - -#define er0 REG(er0) -#define er1 REG(er1) -#define er2 REG(er2) -#define er3 REG(er3) -#define er4 REG(er4) -#define er5 REG(er5) -#define er6 REG(er6) -#define er7 REG(er7) - -#define sp REG(sp) - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE __asm__ ( ".text -#define END_CODE "); -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif diff --git a/cpukit/score/cpu/h8300/rtems/score/cpu.h b/cpukit/score/cpu/h8300/rtems/score/cpu.h deleted file mode 100644 index 8b34bb4c7f..0000000000 --- a/cpukit/score/cpu/h8300/rtems/score/cpu.h +++ /dev/null @@ -1,1176 +0,0 @@ -/** - * @file - * - * @brief Hitachi H8300 CPU Department Source - * - * This include file contains information pertaining to the H8300 - * processor. - */ - -/* - * COPYRIGHT (c) 1989-2006. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef _RTEMS_SCORE_CPU_H -#define _RTEMS_SCORE_CPU_H - -#ifdef __cplusplus -extern "C" { -#endif - -#include -#include -#ifndef ASM - #include -#endif - -/* conditional compilation parameters */ - -/* - * Should the calls to _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - * - * Basically this is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. - * [NOTE: In general, the _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls _Thread_Enable_dispatch which in turns calls - * _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely.] - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_INLINE_ENABLE_DISPATCH FALSE - -/* - * Should this target use 16 or 32 bit object Ids? - * - */ -#define RTEMS_USE_16_BIT_OBJECT - -/* - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in _ISR_Handler_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK TRUE - -/* - * Does the CPU follow the simple vectored interrupt model? - * - * If TRUE, then RTEMS allocates the vector table it internally manages. - * If FALSE, then the BSP is assumed to allocate and manage the vector - * table - * - * H8300 Specific Information: - * - * XXX document implementation including references if appropriate - */ -#define CPU_SIMPLE_VECTORED_INTERRUPTS TRUE - -/* - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE - -/* - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - * - * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/* - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. - * - * The macro name "H8300_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_HARDWARE_FP FALSE - -/* - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_ALL_TASKS_ARE_FP FALSE - -/* - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_IDLE_TASK_IS_FP FALSE - -/* - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Internal_threads_Idle_thread_body - * must be provided and is the default IDLE thread body instead of - * _Internal_threads_Idle_thread_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * 1. BSP provided - * 2. CPU dependent (if provided) - * 3. generic (if no BSP and no CPU dependent) - * - * H8300 Specific Information: - * - * XXX - * The port initially called a BSP dependent routine called - * IDLE_Monitor. The idle task body can be overridden by - * the BSP in newer versions of RTEMS. - */ - -#define CPU_PROVIDES_IDLE_THREAD_BODY FALSE - -/* - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_STACK_GROWS_UP FALSE - -/* - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. - * - * __attribute__ ((aligned (32))) - * - * NOTE: Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_STRUCTURE_ALIGNMENT - -#define CPU_TIMESTAMP_USE_STRUCT_TIMESPEC TRUE - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - -/* - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_MODES_INTERRUPT_MASK 0x00000001 - -#define CPU_PER_CPU_CONTROL_SIZE 0 - -/* - * Processor defined structures required for cpukit/score. - * - * H8300 Specific Information: - * - * XXX - */ - -/* may need to put some structures here. */ - -/* - * Contexts - * - * Generally there are 2 types of context to save. - * 1. Interrupt registers to save - * 2. Task level registers to save - * - * This means we have the following 3 context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * 3. special interrupt level context :: Context_Control_interrupt - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - * - * H8300 Specific Information: - * - * XXX - */ - -#ifndef ASM - -typedef struct { - /* There is no CPU specific per-CPU state */ -} CPU_Per_CPU_control; - -#define nogap __attribute__ ((packed)) - -typedef struct { - uint16_t ccr nogap; - void *er7 nogap; - void *er6 nogap; - uint32_t er5 nogap; - uint32_t er4 nogap; - uint32_t er3 nogap; - uint32_t er2 nogap; - uint32_t er1 nogap; - uint32_t er0 nogap; - uint32_t xxx nogap; -} Context_Control; - -#define _CPU_Context_Get_SP( _context ) \ - (_context)->er7 - -typedef struct { - double some_float_register[2]; -} Context_Control_fp; - -typedef struct { - uint32_t special_interrupt_register; -} CPU_Interrupt_frame; - -/* - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * _CPU_Initialize and copied into the task's FP context area during - * _CPU_Context_Initialize. - * - * H8300 Specific Information: - * - * XXX - */ - -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - * - * H8300 Specific Information: - * - * XXX - */ - -/* XXX: if needed, put more variables here */ - -/* - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -#endif /* ASM */ - -/* - * Amount of extra stack (above minimum stack size) required by - * system initialization thread. Remember that in a multiprocessor - * system the system intialization thread becomes the MP server thread. - * - * H8300 Specific Information: - * - * It is highly unlikely the H8300 will get used in a multiprocessor system. - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/* - * This defines the number of entries in the ISR_Vector_table managed - * by RTEMS. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 64 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * This is defined if the port has a special way to report the ISR nesting - * level. Most ports maintain the variable _ISR_Nest_level. - */ - -#define CPU_PROVIDES_ISR_IS_IN_PROGRESS FALSE - -/* - * Should be large enough to run all RTEMS tests. This ensures - * that a "reasonable" small application should not have any problems. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_STACK_MINIMUM_SIZE (1536) - -#if defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) - #define CPU_SIZEOF_POINTER 4 -#else - #define CPU_SIZEOF_POINTER 2 -#endif - -/* - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_ALIGNMENT 8 - -/* - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, - * then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict - * enough for the partition, then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT - * is strict enough for the stack, then this should be set to 0. - * - * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_STACK_ALIGNMENT 2 - -/* - * ISR handler macros - */ - -/* - * Support routine to initialize the RTEMS vector table after it is allocated. - */ - -#define _CPU_Initialize_vectors() - -/* COPE With Brain dead version of GCC distributed with Hitachi HIView Tools. - Note requires ISR_Level be uint16_t or assembler croaks. -*/ - -#if (__GNUC__ == 2 && __GNUC_MINOR__ == 7 ) - - -/* - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in _level. - */ - -#define _CPU_ISR_Disable( _isr_cookie ) \ - do { \ - __asm__ volatile( "stc.w ccr, @-er7 ;\n orc #0xC0,ccr ;\n mov.w @er7+,%0" : : "r" (_isr_cookie) ); \ - } while (0) - - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * _level is not modified. - */ - - -#define _CPU_ISR_Enable( _isr_cookie ) \ - do { \ - __asm__ volatile( "mov.w %0,@-er7 ;\n ldc.w @er7+, ccr" : : "r" (_isr_cookie) ); \ - } while (0) - - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _level is not - * modified. - */ - - -#define _CPU_ISR_Flash( _isr_cookie ) \ - do { \ - __asm__ volatile( "mov.w %0,@-er7 ;\n ldc.w @er7+, ccr ;\n orc #0xC0,ccr" : : "r" (_isr_cookie) ); \ - } while (0) - -/* end of ISR handler macros */ - -#else /* modern gcc version */ - -/* - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in _level. - * - * H8300 Specific Information: - * - * TODO: As of 8 October 2014, this method is not implemented for the SX. - */ - -#if defined(__H8300H__) || defined(__H8300S__) -#define _CPU_ISR_Disable( _isr_cookie ) \ - do { \ - unsigned char __ccr; \ - __asm__ volatile( "stc ccr, %0 ; orc #0x80,ccr " \ - : "=m" (__ccr) /* : "0" (__ccr) */ ); \ - (_isr_cookie) = __ccr; \ - } while (0) -#else -#define _CPU_ISR_Disable( _isr_cookie ) \ - do { \ - (_isr_cookie) = 0; \ - } while (0) -#endif - - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * _level is not modified. - * - * H8300 Specific Information: - * - * TODO: As of 8 October 2014, this method is not implemented for the SX. - */ - -#if defined(__H8300H__) || defined(__H8300S__) -#define _CPU_ISR_Enable( _isr_cookie ) \ - do { \ - unsigned char __ccr = (unsigned char) (_isr_cookie); \ - __asm__ volatile( "ldc %0, ccr" : : "m" (__ccr) ); \ - } while (0) -#else -#define _CPU_ISR_Enable( _isr_cookie ) \ - do { \ - (_isr_cookie) = (_isr_cookie); \ - } while (0) -#endif - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _level is not - * modified. - * - * H8300 Specific Information: - * - * TODO: As of 8 October 2014, this method is not implemented for the SX. - */ - -#if defined(__H8300H__) || defined(__H8300S__) -#define _CPU_ISR_Flash( _isr_cookie ) \ - do { \ - unsigned char __ccr = (unsigned char) (_isr_cookie); \ - __asm__ volatile( "ldc %0, ccr ; orc #0x80,ccr " : : "m" (__ccr) ); \ - } while (0) -#else -#define _CPU_ISR_Flash( _isr_cookie ) \ - do { \ - _CPU_ISR_Enable( _isr_cookie ); \ - _CPU_ISR_Disable( _isr_cookie ); \ - } while (0) -#endif - -#endif /* end of old gcc */ - - -/* - * Map interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - * - * H8300 Specific Information: - * - * XXX - */ - -#define _CPU_ISR_Set_level( _new_level ) \ - { \ - if ( _new_level ) __asm__ volatile ( "orc #0x80,ccr\n" ); \ - else __asm__ volatile ( "andc #0x7f,ccr\n" ); \ - } - -#ifndef ASM - -uint32_t _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* Context handler macros */ - -/* - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * NOTE: This is_fp parameter is TRUE if the thread is to be a floating - * point thread. This is typically only used on CPUs where the - * FPU may be easily disabled by software such as on the SPARC - * where the PSR contains an enable FPU bit. - * - * H8300 Specific Information: - * - * XXX - */ - - -#define CPU_CCR_INTERRUPTS_ON 0x80 -#define CPU_CCR_INTERRUPTS_OFF 0x00 - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry_point, _is_fp, _tls_area ) \ - /* Locate Me */ \ - do { \ - uintptr_t _stack; \ - \ - if ( (_isr) ) (_the_context)->ccr = CPU_CCR_INTERRUPTS_OFF; \ - else (_the_context)->ccr = CPU_CCR_INTERRUPTS_ON; \ - \ - (void) _is_fp; /* to eliminate set but not used warning */ \ - _stack = ((uintptr_t)(_stack_base)) + (_size) - 4; \ - *((proc_ptr *)(_stack)) = (_entry_point); \ - (_the_context)->er7 = (void *) _stack; \ - (_the_context)->er6 = (void *) _stack; \ - (_the_context)->er5 = 0; \ - (_the_context)->er4 = 1; \ - (_the_context)->er3 = 2; \ - } while (0) - - -/* - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. Context_Restore should work most of the time. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - * - * H8300 Specific Information: - * - * XXX - */ - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/* - * The purpose of this macro is to allow the initial pointer into - * a floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. - * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. - * - * H8300 Specific Information: - * - * XXX - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) (_base) + (_offset) ) - -/* - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other models include (1) not doing anything, and (2) putting - * a "null FP status word" in the correct place in the FP context. - * - * H8300 Specific Information: - * - * XXX - */ - -#define _CPU_Context_Initialize_fp( _destination ) \ - { \ - *(*(_destination)) = _CPU_Null_fp_context; \ - } - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/* - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - * - * H8300 Specific Information: - * - * XXX - */ - -#define _CPU_Fatal_halt( _source, _error ) \ - printk("Fatal Error %d.%d Halted\n",_source, _error); \ - for(;;) - - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/* - * This routine sets _output to the bit number of the first bit - * set in _value. _value is of CPU dependent type Priority_bit_map_Word. - * This type may be either 16 or 32 bits wide although only the 16 - * least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * (1) What happens when run on a value of zero? - * (2) Bits may be numbered from MSB to LSB or vice-versa. - * (3) The numbering may be zero or one based. - * (4) The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and - * _CPU_Priority_bits_index(). These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by _CPU_Priority_mask(). - * The basic major and minor values calculated by _Priority_Major() - * and _Priority_Minor() are "massaged" by _CPU_Priority_bits_index() - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for _Priority_Get_highest() to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: - * - * - a series of 16 bit test instructions - * - a "binary search using if's" - * - _number = 0 - * if _value > 0x00ff - * _value >>=8 - * _number = 8; - * - * if _value > 0x0000f - * _value >=8 - * _number += 4 - * - * _number += bit_set_table[ _value ] - * - * where bit_set_table[ 16 ] has values which indicate the first - * bit set - * - * H8300 Specific Information: - * - * XXX - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE -#define CPU_USE_GENERIC_BITFIELD_DATA TRUE - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - (_output) = 0; /* do something to prevent warnings */ \ - } - -#endif - -/* end of Bitfield handler macros */ - -/* - * This routine builds the mask which corresponds to the bit fields - * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion - * for that routine. - * - * H8300 Specific Information: - * - * XXX - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 1 << (_bit_number) ) - -#endif - -/* - * This routine translates the bit numbers returned by - * _CPU_Bitfield_Find_first_bit() into something suitable for use as - * a major or minor component of a priority. See the discussion - * for that routine. - * - * H8300 Specific Information: - * - * XXX - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -#endif - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - * - * H8300 Specific Information: - * - * XXX - */ - -void _CPU_Initialize(void); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - * - * H8300 Specific Information: - * - * XXX - */ - -void _CPU_ISR_install_raw_handler( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - * - * H8300 Specific Information: - * - * XXX - */ - -void _CPU_ISR_install_vector( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - * - * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - * - * H8300 Specific Information: - * - * XXX - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Internal_threads_Idle_thread_body - * - * This routine is the CPU dependent IDLE thread body. - * - * NOTE: It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY - * is TRUE. - * - * H8300 Specific Information: - * - * XXX - */ - -void *_CPU_Thread_Idle_body( uint32_t ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - * - * H8300 Specific Information: - * - * XXX - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generallu used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - * - * H8300 Specific Information: - * - * XXX - */ - -void _CPU_Context_restore( - Context_Control *new_context -) RTEMS_NO_RETURN; - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - * - * H8300 Specific Information: - * - * XXX - */ - -void _CPU_Context_save_fp( - Context_Control_fp **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - * - * H8300 Specific Information: - * - * XXX - */ - -void _CPU_Context_restore_fp( - Context_Control_fp **fp_context_ptr -); - -static inline void _CPU_Context_volatile_clobber( uintptr_t pattern ) -{ - /* TODO */ -} - -static inline void _CPU_Context_validate( uintptr_t pattern ) -{ - while (1) { - /* TODO */ - } -} - -/* FIXME */ -typedef CPU_Interrupt_frame CPU_Exception_frame; - -void _CPU_Exception_frame_print( const CPU_Exception_frame *frame ); - -/* The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to ensure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. - * - * H8300 Specific Information: - * - * This is the generic implementation. - */ - -static inline uint32_t CPU_swap_u32( - uint32_t value -) -{ - uint32_t byte1, byte2, byte3, byte4, swapped; - - byte4 = (value >> 24) & 0xff; - byte3 = (value >> 16) & 0xff; - byte2 = (value >> 8) & 0xff; - byte1 = value & 0xff; - - swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -typedef uint32_t CPU_Counter_ticks; - -CPU_Counter_ticks _CPU_Counter_read( void ); - -static inline CPU_Counter_ticks _CPU_Counter_difference( - CPU_Counter_ticks second, - CPU_Counter_ticks first -) -{ - return second - first; -} - -/* to be provided by the BSP */ -extern void H8BD_Install_IRQ( - uint32_t vector, - proc_ptr new_handler, - proc_ptr *old_handler ); - -#endif /* ASM */ - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/cpukit/score/cpu/h8300/rtems/score/cpuatomic.h b/cpukit/score/cpu/h8300/rtems/score/cpuatomic.h deleted file mode 100644 index 598ee76b20..0000000000 --- a/cpukit/score/cpu/h8300/rtems/score/cpuatomic.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * COPYRIGHT (c) 2012-2013 Deng Hengyi. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef _RTEMS_SCORE_ATOMIC_CPU_H -#define _RTEMS_SCORE_ATOMIC_CPU_H - -#include - -#endif /* _RTEMS_SCORE_ATOMIC_CPU_H */ diff --git a/cpukit/score/cpu/h8300/rtems/score/h8300.h b/cpukit/score/cpu/h8300/rtems/score/h8300.h deleted file mode 100644 index e30343cb84..0000000000 --- a/cpukit/score/cpu/h8300/rtems/score/h8300.h +++ /dev/null @@ -1,44 +0,0 @@ -/** - * @file - * - * @brief Information Required to Build RTEMS for a Particular Member - * of the Hitachi H8/300 Family - * - * This file contains information pertaining to the Hitachi H8/300 - * processor family. - */ - -/* - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef _RTEMS_SCORE_H8300_H -#define _RTEMS_SCORE_H8300_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the "h8300" - * family when executing in protected mode. It does - * this by setting variables to indicate which implementation - * dependent features are present in a particular member - * of the family. - */ - -#define CPU_NAME "Hitachi H8300" -#define CPU_MODEL_NAME "h8300" -#define H8300_HAS_FPU 0 - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/cpukit/score/cpu/h8300/rtems/score/types.h b/cpukit/score/cpu/h8300/rtems/score/types.h deleted file mode 100644 index 7fcac8b552..0000000000 --- a/cpukit/score/cpu/h8300/rtems/score/types.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * @file - * - * @brief Hitachi H8300 CPU Type Definitions - * - * This include file contains type definitions pertaining to the Hitachi - * h8300 processor family. - */ - -/* - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef _RTEMS_SCORE_TYPES_H -#define _RTEMS_SCORE_TYPES_H - -#include - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -/** Type that can store a 32-bit integer or a pointer. */ -typedef unsigned long CPU_Uint32ptr; - -typedef uint16_t Priority_bit_map_Word; -typedef void h8300_isr; -typedef void ( *h8300_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -- cgit v1.2.3