From c1c37a1c5819ecd1d8fc0495ea0d5561dc5ced0d Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Tue, 7 Apr 2015 14:25:49 +0200 Subject: LIBPCI: converted to BSD header --- cpukit/libpci/pci.h | 279 ++-------------------------------------------------- 1 file changed, 9 insertions(+), 270 deletions(-) (limited to 'cpukit/libpci/pci.h') diff --git a/cpukit/libpci/pci.h b/cpukit/libpci/pci.h index e9955bc6a2..fc33bbb18a 100644 --- a/cpukit/libpci/pci.h +++ b/cpukit/libpci/pci.h @@ -1,285 +1,24 @@ /* + * PCI library. Defines in this file was taken from FreeBSD and auto-generated + * pci_ids.h reused from RTEMS. * - * PCI defines and function prototypes - * Copyright 1994, Drew Eckhardt - * Copyright 1997, 1998 Martin Mares - * - * New PCI library written from scratch. Defines in this file was reused. - * auto-generated pci_ids.h also reused. - * Copyright 2009, Cobham Gaisler AB + * COPYRIGHT (c) 2009 Cobham Gaisler AB. * - * For more information, please consult the following manuals (look at - * http://www.pcisig.com/ for how to get them): - * - * PCI BIOS Specification - * PCI Local Bus Specification - * PCI to PCI Bridge Specification - * PCI System Design Guide + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rtems.com/license/LICENSE. */ #ifndef __PCI_H__ #define __PCI_H__ +#include #include -/* - * Under PCI, each device has 256 bytes of configuration address space, - * of which the first 64 bytes are standardized as follows: - */ -#define PCI_VENDOR_ID 0x00 /* 16 bits */ -#define PCI_DEVICE_ID 0x02 /* 16 bits */ -#define PCI_COMMAND 0x04 /* 16 bits */ -#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ -#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ -#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ -#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ -#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ -#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ -#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ -#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ -#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ -#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ - -#define PCI_STATUS 0x06 /* 16 bits */ -#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ -#define PCI_STATUS_UDF 0x40 /* Support User Definable Features */ - -#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ -#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ -#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ -#define PCI_STATUS_DEVSEL_FAST 0x000 -#define PCI_STATUS_DEVSEL_MEDIUM 0x200 -#define PCI_STATUS_DEVSEL_SLOW 0x400 -#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ -#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ -#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ -#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ -#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ - -#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 - revision */ -#define PCI_REVISION_ID 0x08 /* Revision ID */ -#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ -#define PCI_CLASS_DEVICE 0x0a /* Device class */ - -#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ -#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ -#define PCI_HEADER_TYPE 0x0e /* 8 bits */ -#define PCI_HEADER_TYPE_NORMAL 0 -#define PCI_HEADER_TYPE_BRIDGE 1 -#define PCI_HEADER_TYPE_CARDBUS 2 - -#define PCI_BIST 0x0f /* 8 bits */ -#define PCI_BIST_CODE_MASK 0x0f /* Return result */ -#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ -#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ - -/* - * Base addresses specify locations in memory or I/O space. - * Decoded size can be determined by writing a value of - * 0xffffffff to the register, and reading it back. Only - * 1 bits are decoded. - */ -#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ -#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ -#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ -#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ -#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ -#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ -#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ -#define PCI_BASE_ADDRESS_SPACE_IO 0x01 -#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 -#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 -#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ -#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M */ -#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ -#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ -#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) -#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) -/* bit 1 is reserved if address_space = 1 */ - -/* Header type 0 (normal devices) */ -#define PCI_CARDBUS_CIS 0x28 -#define PCI_SUBSYSTEM_VENDOR_ID 0x2c -#define PCI_SUBSYSTEM_ID 0x2e -#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ -#define PCI_ROM_ADDRESS_ENABLE 0x01 -#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) - -/* 0x34 Capabilities Pointer (PCI 2.3) */ -#define PCI_CAP_PTR 0x34 /* 8 bits */ - -/* 0x35-0x3b are reserved */ -#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ -#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ -#define PCI_MIN_GNT 0x3e /* 8 bits */ -#define PCI_MAX_LAT 0x3f /* 8 bits */ - -/* Header type 1 (PCI-to-PCI bridges) */ -#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ -#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ -#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ -#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ -#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ -#define PCI_IO_LIMIT 0x1d -#define PCI_IO_RANGE_TYPE_MASK 0x0f /* I/O bridging type */ -#define PCI_IO_RANGE_TYPE_16 0x00 -#define PCI_IO_RANGE_TYPE_32 0x01 -#define PCI_IO_RANGE_MASK (~0x0f) -#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ -#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ -#define PCI_MEMORY_LIMIT 0x22 -#define PCI_MEMORY_RANGE_TYPE_MASK 0x0f -#define PCI_MEMORY_RANGE_MASK (~0x0f) -#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ -#define PCI_PREF_MEMORY_LIMIT 0x26 -#define PCI_PREF_RANGE_TYPE_MASK 0x0f -#define PCI_PREF_RANGE_TYPE_32 0x00 -#define PCI_PREF_RANGE_TYPE_64 0x01 -#define PCI_PREF_RANGE_MASK (~0x0f) -#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ -#define PCI_PREF_LIMIT_UPPER32 0x2c -#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ -#define PCI_IO_LIMIT_UPPER16 0x32 -/* 0x34-0x3b is reserved */ -#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ -/* 0x3c-0x3d are same as for htype 0 */ -#define PCI_BRIDGE_CONTROL 0x3e -#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ -#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ -#define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */ -#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ -#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ -#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ -#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ - -/* Header type 2 (CardBus bridges) */ -/* 0x14-0x15 reserved */ -#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ -#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ -#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ -#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ -#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ -#define PCI_CB_MEMORY_BASE_0 0x1c -#define PCI_CB_MEMORY_LIMIT_0 0x20 -#define PCI_CB_MEMORY_BASE_1 0x24 -#define PCI_CB_MEMORY_LIMIT_1 0x28 -#define PCI_CB_IO_BASE_0 0x2c -#define PCI_CB_IO_BASE_0_HI 0x2e -#define PCI_CB_IO_LIMIT_0 0x30 -#define PCI_CB_IO_LIMIT_0_HI 0x32 -#define PCI_CB_IO_BASE_1 0x34 -#define PCI_CB_IO_BASE_1_HI 0x36 -#define PCI_CB_IO_LIMIT_1 0x38 -#define PCI_CB_IO_LIMIT_1_HI 0x3a -#define PCI_CB_IO_RANGE_MASK (~0x03) -/* 0x3c-0x3d are same as for htype 0 */ -#define PCI_CB_BRIDGE_CONTROL 0x3e -#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ -#define PCI_CB_BRIDGE_CTL_SERR 0x02 -#define PCI_CB_BRIDGE_CTL_ISA 0x04 -#define PCI_CB_BRIDGE_CTL_VGA 0x08 -#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 -#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ -#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ -#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ -#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 -#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 -#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 -#define PCI_CB_SUBSYSTEM_ID 0x42 -#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ -/* 0x48-0x7f reserved */ - -/* Device classes and subclasses */ - -#define PCI_CLASS_NOT_DEFINED 0x0000 -#define PCI_CLASS_NOT_DEFINED_VGA 0x0001 - -#define PCI_BASE_CLASS_STORAGE 0x01 -#define PCI_CLASS_STORAGE_SCSI 0x0100 -#define PCI_CLASS_STORAGE_IDE 0x0101 -#define PCI_CLASS_STORAGE_FLOPPY 0x0102 -#define PCI_CLASS_STORAGE_IPI 0x0103 -#define PCI_CLASS_STORAGE_RAID 0x0104 -#define PCI_CLASS_STORAGE_OTHER 0x0180 - -#define PCI_BASE_CLASS_NETWORK 0x02 -#define PCI_CLASS_NETWORK_ETHERNET 0x0200 -#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201 -#define PCI_CLASS_NETWORK_FDDI 0x0202 -#define PCI_CLASS_NETWORK_ATM 0x0203 -#define PCI_CLASS_NETWORK_OTHER 0x0280 - -#define PCI_BASE_CLASS_DISPLAY 0x03 -#define PCI_CLASS_DISPLAY_VGA 0x0300 -#define PCI_CLASS_DISPLAY_XGA 0x0301 -#define PCI_CLASS_DISPLAY_OTHER 0x0380 - -#define PCI_BASE_CLASS_MULTIMEDIA 0x04 -#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400 -#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401 -#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480 - -#define PCI_BASE_CLASS_MEMORY 0x05 -#define PCI_CLASS_MEMORY_RAM 0x0500 -#define PCI_CLASS_MEMORY_FLASH 0x0501 -#define PCI_CLASS_MEMORY_OTHER 0x0580 - -#define PCI_BASE_CLASS_BRIDGE 0x06 -#define PCI_CLASS_BRIDGE_HOST 0x0600 -#define PCI_CLASS_BRIDGE_ISA 0x0601 -#define PCI_CLASS_BRIDGE_EISA 0x0602 -#define PCI_CLASS_BRIDGE_MC 0x0603 -#define PCI_CLASS_BRIDGE_PCI 0x0604 -#define PCI_CLASS_BRIDGE_PCMCIA 0x0605 -#define PCI_CLASS_BRIDGE_NUBUS 0x0606 -#define PCI_CLASS_BRIDGE_CARDBUS 0x0607 -#define PCI_CLASS_BRIDGE_OTHER 0x0680 - -#define PCI_BASE_CLASS_COMMUNICATION 0x07 -#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700 -#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701 -#define PCI_CLASS_COMMUNICATION_OTHER 0x0780 - -#define PCI_BASE_CLASS_SYSTEM 0x08 -#define PCI_CLASS_SYSTEM_PIC 0x0800 -#define PCI_CLASS_SYSTEM_DMA 0x0801 -#define PCI_CLASS_SYSTEM_TIMER 0x0802 -#define PCI_CLASS_SYSTEM_RTC 0x0803 -#define PCI_CLASS_SYSTEM_OTHER 0x0880 - -#define PCI_BASE_CLASS_INPUT 0x09 -#define PCI_CLASS_INPUT_KEYBOARD 0x0900 -#define PCI_CLASS_INPUT_PEN 0x0901 -#define PCI_CLASS_INPUT_MOUSE 0x0902 -#define PCI_CLASS_INPUT_OTHER 0x0980 - -#define PCI_BASE_CLASS_DOCKING 0x0a -#define PCI_CLASS_DOCKING_GENERIC 0x0a00 -#define PCI_CLASS_DOCKING_OTHER 0x0a01 - -#define PCI_BASE_CLASS_PROCESSOR 0x0b -#define PCI_CLASS_PROCESSOR_386 0x0b00 -#define PCI_CLASS_PROCESSOR_486 0x0b01 -#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02 -#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10 -#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20 -#define PCI_CLASS_PROCESSOR_CO 0x0b40 - -#define PCI_BASE_CLASS_SERIAL 0x0c -#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00 -#define PCI_CLASS_SERIAL_ACCESS 0x0c01 -#define PCI_CLASS_SERIAL_SSA 0x0c02 -#define PCI_CLASS_SERIAL_USB 0x0c03 -#define PCI_CLASS_SERIAL_FIBER 0x0c04 - -#define PCI_CLASS_OTHERS 0xff - #define PCI_INVALID_VENDORDEVICEID 0xffffffff -#define PCI_MULTI_FUNCTION 0x80 -#define PCI_MAX_DEVICES 32 -#define PCI_MAX_FUNCTIONS 8 +#define PCID_CLASS(class, dev) ((class << 8) | dev) +#define PCID_PCI2PCI_BRIDGE PCID_CLASS(PCIC_BRIDGE, PCIS_BRIDGE_PCI) #include -- cgit v1.2.3