From 849500d0f226e9aa81cbfddf7c09c0f83a7568f9 Mon Sep 17 00:00:00 2001
From: Chris Johns <chrisj@rtems.org>
Date: Wed, 16 Aug 2017 15:10:33 +1000
Subject: dev/i2c: Add I2C device support for FPGA Slave, LM25066A, TMP112,
 ADS1113, ADS1114 and ADS1115

Closes #3101.
---
 cpukit/dev/include/dev/i2c/ti-tmp112.h | 109 +++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)
 create mode 100644 cpukit/dev/include/dev/i2c/ti-tmp112.h

(limited to 'cpukit/dev/include/dev/i2c/ti-tmp112.h')

diff --git a/cpukit/dev/include/dev/i2c/ti-tmp112.h b/cpukit/dev/include/dev/i2c/ti-tmp112.h
new file mode 100644
index 0000000000..58efbef7d8
--- /dev/null
+++ b/cpukit/dev/include/dev/i2c/ti-tmp112.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2016-2017 Chris Johns <chrisj@rtems.org>
+ * All rights reserved.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.org/license/LICENSE.
+ */
+
+/*
+ * TI TMP112
+ *   http://www.ti.com/product/TMP112
+ */
+
+#ifndef TI_TMP112_H
+#define TI_TMP112_H
+
+#include <dev/i2c/i2c.h>
+
+/*
+ * Confirguration.
+ */
+#define TI_TMP112_CR_0_25Hz      (0 << 6)
+#define TI_TMP112_CR_1Hz         (1 << 6)
+#define TI_TMP112_CR_4Hz         (2 << 6)    /* default */
+#define TI_TMP112_CR_8Hz         (3 << 6)
+#define TI_TMP112_EM_NORMAL      (0 << 4)    /* default */
+#define TI_TMP112_EM_EXTENDED    (1 << 4)
+#define TI_TMP112_SD_ON          (0 << 8)    /* default */
+#define TI_TMP112_SD_SHUTDOWN    (1 << 8)
+#define TI_TMP112_TM_COMPARATOR  (0 << 9)    /* default */
+#define TI_TMP112_TM_INTERRUPT   (1 << 9)
+#define TI_TMP112_POL_ALERT_LOW  (0 << 10)   /* default */
+#define TI_TMP112_POL_ALERT_HIGH (1 << 10)
+#define TI_TMP112_FQL_1          (0 << 11)   /* default */
+#define TI_TMP112_FQL_2          (1 << 11)
+#define TI_TMP112_FQL_4          (2 << 11)
+#define TI_TMP112_FQL_6          (3 << 11)
+
+/*
+ * IO control interface.
+ */
+#define TI_TMP112_GET_TEMP      (I2C_DEV_IO_CONTROL + 0)
+#define TI_TMP112_GET_TEMP_RAW  (I2C_DEV_IO_CONTROL + 1)
+#define TI_TMP112_SET_CONFIG    (I2C_DEV_IO_CONTROL + 2)
+#define TI_TMP112_SET_LOW_TEMP  (I2C_DEV_IO_CONTROL + 3)
+#define TI_TMP112_SET_HIGH_TEMP (I2C_DEV_IO_CONTROL + 4)
+
+/*
+ * Register the device.
+ */
+int i2c_dev_register_ti_tmp112(const char* bus_path,
+                               const char* dev_path,
+                               uint16_t    address);
+
+/*
+ * Get the temperature in degrees C x 10000. To print you would so:
+ *
+ *   printf("Temperature is %3d.%04d\n", temp / 10000, temp % 10000);
+ *
+ * If the device is shutdown a single conversion is made waiting for the
+ * conversion to complete.
+ */
+static inline int
+ti_tmp112_get_temperature(int fd, int* temp)
+{
+  return ioctl(fd, TI_TMP112_GET_TEMP, temp);
+}
+
+/*
+ * Get the temperature as the raw register value.
+ *
+ * If the device is shutdown a single conversion is made waiting for the
+ * conversion to complete.
+ */
+static inline int
+ti_tmp112_get_temperature_raw(int fd, unsigned int* temp)
+{
+  return ioctl(fd, TI_TMP112_GET_TEMP_RAW, temp);
+}
+
+/*
+ * Set the configuration.
+ */
+static inline int
+ti_tmp112_adc_set_mux(int fd, uint16_t config)
+{
+  return ioctl(fd, TI_TMP112_SET_CONFIG, (void *)(uintptr_t) config);
+}
+
+/*
+ * Set the low temperature.
+ */
+static inline int
+ti_tmp112_set_low_temperator(int fd, uint16_t temp)
+{
+  return ioctl(fd, TI_TMP112_SET_LOW_TEMP, (void *)(uintptr_t) temp);
+}
+
+/*
+ * Set the high temperature.
+ */
+static inline int
+ti_tmp112_adc_set_high_threshold(int fd, uint16_t level)
+{
+  return ioctl(fd, TI_TMP112_SET_HIGH_TEMP, (void *)(uintptr_t) level);
+}
+
+#endif
-- 
cgit v1.2.3