From a884df35945d8e7ec4171f16e6a4995b9fffc048 Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Tue, 17 Apr 2018 09:49:49 +0200 Subject: bsp/motorola_powerpc: Move bspstart.c to bsps This shared powerpc file was only used by this BSP. This patch is a part of the BSP source reorganization. Update #3285. --- .../libbsp/powerpc/motorola_powerpc/Makefile.am | 2 +- c/src/lib/libbsp/powerpc/shared/startup/bspstart.c | 376 --------------------- 2 files changed, 1 insertion(+), 377 deletions(-) delete mode 100644 c/src/lib/libbsp/powerpc/shared/startup/bspstart.c (limited to 'c') diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am index 212c6920de..71567fc38a 100644 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am +++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am @@ -34,7 +34,7 @@ project_lib_LIBRARIES = librtemsbsp.a librtemsbsp_a_SOURCES = # startup -librtemsbsp_a_SOURCES += ../shared/startup/bspstart.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/motorola_powerpc/start/bspstart.c librtemsbsp_a_SOURCES += ../shared/startup/bspgetworkarea.c librtemsbsp_a_SOURCES += ../shared/showbats.c librtemsbsp_a_SOURCES += ../shared/startup/bsppredriverhook.c diff --git a/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c b/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c deleted file mode 100644 index dac4b2452d..0000000000 --- a/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c +++ /dev/null @@ -1,376 +0,0 @@ -/* - * This routine does the bulk of the system initialization. - */ - -/* - * COPYRIGHT (c) 1989-2007. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - * - * Modified to support the MCP750. - * Modifications Copyright (C) 1999 Eric Valette. valette@crf.canon.fr - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern void _return_to_ppcbug(void); -extern unsigned long __rtems_end[]; -extern void L1_caches_enables(void); -extern unsigned get_L2CR(void); -extern void set_L2CR(unsigned); -extern Triv121PgTbl BSP_pgtbl_setup(unsigned int *); -extern void BSP_pgtbl_activate(Triv121PgTbl); - -SPR_RW(SPRG1) - -#if defined(DEBUG_BATS) -extern void ShowBATS(void); -#endif - -/* - * Driver configuration parameters - */ -uint32_t bsp_clicks_per_usec; - -/* - * Copy of residuals passed by firmware - */ -RESIDUAL residualCopy; -/* - * Copy Additional boot param passed by boot loader - */ -#define MAX_LOADER_ADD_PARM 80 -char loaderParam[MAX_LOADER_ADD_PARM]; - -char *BSP_commandline_string = loaderParam; -/* - * Vital Board data Start using DATA RESIDUAL - */ -/* - * Total memory using RESIDUAL DATA - */ -unsigned int BSP_mem_size; - -/* - * PCI Bus Frequency - */ -unsigned int BSP_bus_frequency; -/* - * processor clock frequency - */ -unsigned int BSP_processor_frequency; -/* - * Time base divisior (how many tick for 1 second). - */ -unsigned int BSP_time_base_divisor; - -/* - * Use the shared implementations of the following routines - */ - -char *save_boot_params( - void *r3, - void *r4, - void *r5, - char *cmdline_start, - char *cmdline_end -) -{ - - residualCopy = *(RESIDUAL *)r3; - strncpy(loaderParam, cmdline_start, MAX_LOADER_ADD_PARM); - loaderParam[MAX_LOADER_ADD_PARM - 1] ='\0'; - return loaderParam; -} - -#if defined(mvme2100) -unsigned int EUMBBAR; - -/* - * Return the current value of the Embedded Utilities Memory Block Base Address - * Register (EUMBBAR) as read from the processor configuration register using - * Processor Address Map B (CHRP). - */ -static unsigned int get_eumbbar(void) { - out_le32( (volatile uint32_t *)0xfec00000, 0x80000078 ); - return in_le32( (volatile uint32_t *)0xfee00000 ); -} -#endif - -/* - * bsp_start - * - * This routine does the bulk of the system initialization. - */ - -void bsp_start( void ) -{ -#if !defined(mvme2100) - unsigned l2cr; -#endif - uintptr_t intrStackStart; - uintptr_t intrStackSize; - prep_t boardManufacturer; - motorolaBoard myBoard; - Triv121PgTbl pt=0; - - /* - * Get CPU identification dynamically. Note that the get_ppc_cpu_type() - * function store the result in global variables so that it can be used - * later... - */ - get_ppc_cpu_type(); - get_ppc_cpu_revision(); - - /* - * Init MMU block address translation to enable hardware access - */ - -#if !defined(mvme2100) - /* - * PC legacy IO space used for inb/outb and all PC compatible hardware - */ - setdbat(1, _IO_BASE, _IO_BASE, 0x10000000, IO_PAGE); -#endif - - /* - * PCI devices memory area. Needed to access OpenPIC features - * provided by the Raven - * - * T. Straumann: give more PCI address space - */ - setdbat(2, PCI_MEM_BASE+PCI_MEM_WIN0, PCI_MEM_BASE+PCI_MEM_WIN0, 0x10000000, IO_PAGE); - - /* - * Must have acces to open pic PCI ACK registers provided by the RAVEN - */ -#ifndef qemu - setdbat(3, 0xf0000000, 0xf0000000, 0x10000000, IO_PAGE); -#else - setdbat(3, 0xb0000000, 0xb0000000, 0x10000000, IO_PAGE); -#endif - -#if defined(mvme2100) - /* Need 0xfec00000 mapped for this */ - EUMBBAR = get_eumbbar(); -#endif - - /* - * enables L1 Cache. Note that the L1_caches_enables() codes checks for - * relevant CPU type so that the reason why there is no use of myCpu... - */ - L1_caches_enables(); - - select_console(CONSOLE_LOG); - - /* - * We check that the keyboard is present and immediately - * select the serial console if not. - */ -#if defined(BSP_KBD_IOBASE) - { int err; - err = kbdreset(); - if (err) select_console(CONSOLE_SERIAL); - } -#else - select_console(CONSOLE_SERIAL); -#endif - - -#if !defined(mvme2100) - /* - * Enable L2 Cache. Note that the set_L2CR(L2CR) codes checks for - * relevant CPU type (mpc750)... - */ - l2cr = get_L2CR(); -#ifdef SHOW_LCR2_REGISTER - printk("Initial L2CR value = %x\n", l2cr); -#endif - if ( (! (l2cr & 0x80000000)) && ((int) l2cr == -1)) - set_L2CR(0xb9A14000); -#endif - - /* - * Initialize the interrupt related settings. - */ - intrStackStart = (uintptr_t) __rtems_end; - intrStackSize = rtems_configuration_get_interrupt_stack_size(); - - /* - * Initialize default raw exception handlers. - */ - ppc_exc_initialize(intrStackStart, intrStackSize); - - boardManufacturer = checkPrepBoardType(&residualCopy); - if (boardManufacturer != PREP_Motorola) { - printk("Unsupported hardware vendor\n"); - while (1); - } - myBoard = getMotorolaBoard(); - - printk("-----------------------------------------\n"); - printk("Welcome to %s on %s\n", _RTEMS_version, - motorolaBoardToString(myBoard)); - printk("-----------------------------------------\n"); -#ifdef SHOW_MORE_INIT_SETTINGS - printk("Residuals are located at %x\n", (unsigned) &residualCopy); - printk("Additionnal boot options are %s\n", loaderParam); - printk("Software IRQ stack starts at %x with size %u\n", intrStackStart, intrStackSize); - printk("-----------------------------------------\n"); -#endif - -#ifdef TEST_RETURN_TO_PPCBUG - printk("Hit to return to PPCBUG monitor\n"); - printk("When Finished hit GO. It should print \n"); - debug_getc(); - _return_to_ppcbug(); - printk("Back from monitor\n"); - _return_to_ppcbug(); -#endif /* TEST_RETURN_TO_PPCBUG */ - -#ifdef SHOW_MORE_INIT_SETTINGS - printk("Going to start PCI buses scanning and initialization\n"); -#endif - - pci_initialize(); - { - const struct _int_map *bspmap = motorolaIntMap(currentBoard); - if( bspmap ) { - printk("pci : Configuring interrupt routing for '%s'\n", - motorolaBoardToString(currentBoard)); - FixupPCI(bspmap, motorolaIntSwizzle(currentBoard)); - } - else - printk("pci : Interrupt routing not available for this bsp\n"); - } - -#ifdef SHOW_MORE_INIT_SETTINGS - printk("Number of PCI buses found is : %d\n", pci_bus_count()); -#endif -#ifdef TEST_RAW_EXCEPTION_CODE - printk("Testing exception handling Part 1\n"); - /* - * Cause a software exception - */ - __asm__ __volatile ("sc"); - /* - * Check we can still catch exceptions and return coorectly. - */ - printk("Testing exception handling Part 2\n"); - __asm__ __volatile ("sc"); - - /* - * Somehow doing the above seems to clobber SPRG0 on the mvme2100. The - * interrupt disable mask is stored in SPRG0. Is this a problem? - */ - ppc_interrupt_set_disable_mask( PPC_INTERRUPT_DISABLE_MASK_DEFAULT); - -#endif - -/* See above */ - - BSP_mem_size = residualCopy.TotalMemory; - BSP_bus_frequency = residualCopy.VitalProductData.ProcessorBusHz; - BSP_processor_frequency = residualCopy.VitalProductData.ProcessorHz; - BSP_time_base_divisor = (residualCopy.VitalProductData.TimeBaseDivisor? - residualCopy.VitalProductData.TimeBaseDivisor : 4000); - - /* clear hostbridge errors but leave MCP disabled - - * PCI config space scanning code will trip otherwise :-( - */ - _BSP_clear_hostbridge_errors(0 /* enableMCP */, 0/*quiet*/); - - if (BSP_mem_size > 0x10000000) - { - /* Support cases of system memory size larger than 256Mb. - * - * We use BAT3 in order to obtain access to the top section of the RAM. - * We also need to do this just before setting up the page table because - * this is where the page table will be located. - */ - const unsigned int mem256Count = (BSP_mem_size / 0x10000000); - const unsigned int BAT3Addr = ((BSP_mem_size % 0x10000000) ? - (mem256Count * 0x10000000) : - ((mem256Count-1) * 0x10000000)); - setdbat(3, BAT3Addr, BAT3Addr, 0x10000000, IO_PAGE); -#ifdef SHOW_MORE_INIT_SETTINGS - printk("Setting up BAT3 for large memory support. (BAT3 --> 0x%x)\n", BAT3Addr); -#endif - } - - /* Allocate and set up the page table mappings - * This is only available on >604 CPUs. - * - * NOTE: This setup routine may modify the available memory - * size. It is essential to call it before - * calculating the workspace etc. - */ - pt = BSP_pgtbl_setup(&BSP_mem_size); - - if (!pt || TRIV121_MAP_SUCCESS != triv121PgTblMap( - pt, TRIV121_121_VSID, -#ifndef qemu - 0xfeff0000, -#else - 0xbffff000, -#endif - 1, - TRIV121_ATTR_IO_PAGE, TRIV121_PP_RW_PAGE)) { - printk("WARNING: unable to setup page tables VME " - "bridge must share PCI space\n"); - } - - /* - * initialize the device driver parameters - */ - bsp_clicks_per_usec = BSP_bus_frequency/(BSP_time_base_divisor * 1000); - rtems_counter_initialize_converter( - BSP_bus_frequency / (BSP_time_base_divisor / 1000) - ); - - /* - * Initalize RTEMS IRQ system - */ - BSP_rtems_irq_mng_init(0); - - /* Activate the page table mappings only after - * initializing interrupts because the irq_mng_init() - * routine needs to modify the text - */ - if (pt) { -#ifdef SHOW_MORE_INIT_SETTINGS - printk("Page table setup finished; will activate it NOW...\n"); -#endif - BSP_pgtbl_activate(pt); - /* finally, switch off DBAT3 */ - setdbat(3, 0, 0, 0, 0); - } - -#if defined(DEBUG_BATS) - ShowBATS(); -#endif - -#ifdef SHOW_MORE_INIT_SETTINGS - printk("Exit from bspstart\n"); -#endif -} -- cgit v1.2.3