From 1972b1e7609ec9da3ba2e83d0048ba41940cc282 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Wed, 1 Dec 1999 14:46:02 +0000 Subject: Patch rtems-rc-19991123-rc-2.diff from Ralf Corsepius which implements automake support for some score/cpu/ subdirectories and fixes a few minor configuration bugs. To apply: rm -rf c/src/exec/score/cpu/a29k/wrap rm -rf c/src/exec/score/cpu/hppa1.1/wrap rm -rf c/src/exec/score/cpu/i386/wrap rm -rf c/src/exec/score/cpu/mips64orion/wrap rm -rf c/src/exec/score/cpu/no_cpu/wrap patch -p1 < rtems-rc-19991123-rc-2.diff.gz Notes: * I don't see a possiblity to convert the powerpc subdirectory in its current layout to automake the time being. * Besides the fact that this subdirectory is not in single-tree building layout, the actual showstopper is the ifeq $(RTEMS_CPU_MODEL),mpc750) gmake-conditional in powerpc/Makefile.in, which automake (correctly) refuses to handle. * The problem is *not* specific to the powerpc. Other CPUs basically have similar problems (SH:sh7032 vs sh7045, SPARC: erc32.h in score/cpu/sparc), but have been lucky to get around real issues (cf. configuration files below score/cpu/sh/). * From a configuration focused POV this problem boils down to a file/subdirectory selection problem: ppc: 1 or others sh: 1 out of 2 sparc: 1 out of 1 Automake's means to implement such behavior is using conditionals to be evaluated at configuration-time. The old configuration scheme however used make-time conditionals. The SH port was lucky to get around this issue because it applies a selection from a limited set of possible selections, the powerpc however applies a selection from an unlimited set, based on data not being available at configuration time. * Currently I only see two general solutions: 1) make RTEMS_CPU_MODEL available at configuration time, ie. replace make-time configuration by configuration-time configuration 2) Perform the selection at build-time, i.e. always install all files, but use #ifdef #else #endif in source files. This is what the m68k has exploited at other locations inside of the source-tree. => This directory is the last one remaining not using automake below the whole exec/ hierarchy. --- c/src/exec/score/cpu/a29k/configure.in | 40 ++++++++++ c/src/exec/score/cpu/hppa1.1/configure.in | 40 ++++++++++ c/src/exec/score/cpu/hppa1.1/wrap/Makefile.in | 90 ---------------------- c/src/exec/score/cpu/i386/configure.in | 40 ++++++++++ c/src/exec/score/cpu/i386/wrap/Makefile.in | 90 ---------------------- c/src/exec/score/cpu/mips/configure.in | 40 ++++++++++ c/src/exec/score/cpu/mips64orion/configure.in | 40 ++++++++++ c/src/exec/score/cpu/mips64orion/wrap/Makefile.in | 90 ---------------------- c/src/exec/score/cpu/no_cpu/configure.in | 40 ++++++++++ c/src/exec/score/cpu/no_cpu/wrap/Makefile.in | 91 ----------------------- 10 files changed, 240 insertions(+), 361 deletions(-) create mode 100644 c/src/exec/score/cpu/a29k/configure.in create mode 100644 c/src/exec/score/cpu/hppa1.1/configure.in delete mode 100644 c/src/exec/score/cpu/hppa1.1/wrap/Makefile.in create mode 100644 c/src/exec/score/cpu/i386/configure.in delete mode 100644 c/src/exec/score/cpu/i386/wrap/Makefile.in create mode 100644 c/src/exec/score/cpu/mips/configure.in create mode 100644 c/src/exec/score/cpu/mips64orion/configure.in delete mode 100644 c/src/exec/score/cpu/mips64orion/wrap/Makefile.in create mode 100644 c/src/exec/score/cpu/no_cpu/configure.in delete mode 100644 c/src/exec/score/cpu/no_cpu/wrap/Makefile.in (limited to 'c/src') diff --git a/c/src/exec/score/cpu/a29k/configure.in b/c/src/exec/score/cpu/a29k/configure.in new file mode 100644 index 0000000000..22f6e36c53 --- /dev/null +++ b/c/src/exec/score/cpu/a29k/configure.in @@ -0,0 +1,40 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl $Id$ + +AC_PREREQ(2.13) +AC_INIT(cpu_asm.S) +RTEMS_TOP(../../../../../..) +AC_CONFIG_AUX_DIR(../../../../../..) + +RTEMS_CANONICAL_TARGET_CPU + +AM_INIT_AUTOMAKE(rtems-c-src-exec-score-cpu-a29k,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_ENABLE_LIBCDIR + +RTEMS_ENV_RTEMSBSP + +RTEMS_CHECK_CPU +RTEMS_CANONICAL_HOST + +RTEMS_PROJECT_ROOT + +dnl check target cc +RTEMS_PROG_CC_FOR_TARGET +RTEMS_CANONICALIZE_TOOLS + +RTEMS_CHECK_NEWLIB + +# Check if there is custom/*.cfg for this BSP +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) + +PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include" +AC_SUBST(PROJECT_INCLUDE) + +# Try to explicitly list a Makefile here +AC_OUTPUT( +Makefile +rtems/Makefile +rtems/score/Makefile) diff --git a/c/src/exec/score/cpu/hppa1.1/configure.in b/c/src/exec/score/cpu/hppa1.1/configure.in new file mode 100644 index 0000000000..7b33e6537a --- /dev/null +++ b/c/src/exec/score/cpu/hppa1.1/configure.in @@ -0,0 +1,40 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl $Id$ + +AC_PREREQ(2.13) +AC_INIT(cpu_asm.S) +RTEMS_TOP(../../../../../..) +AC_CONFIG_AUX_DIR(../../../../../..) + +RTEMS_CANONICAL_TARGET_CPU + +AM_INIT_AUTOMAKE(rtems-c-src-exec-score-cpu-hppa1.1,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_ENABLE_LIBCDIR + +RTEMS_ENV_RTEMSBSP + +RTEMS_CHECK_CPU +RTEMS_CANONICAL_HOST + +RTEMS_PROJECT_ROOT + +dnl check target cc +RTEMS_PROG_CC_FOR_TARGET +RTEMS_CANONICALIZE_TOOLS + +RTEMS_CHECK_NEWLIB + +# Check if there is custom/*.cfg for this BSP +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) + +PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include" +AC_SUBST(PROJECT_INCLUDE) + +# Try to explicitly list a Makefile here +AC_OUTPUT( +Makefile +rtems/Makefile +rtems/score/Makefile) diff --git a/c/src/exec/score/cpu/hppa1.1/wrap/Makefile.in b/c/src/exec/score/cpu/hppa1.1/wrap/Makefile.in deleted file mode 100644 index e285c2f4ec..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/wrap/Makefile.in +++ /dev/null @@ -1,90 +0,0 @@ -# -# $Id$ -# -# *** NOTE *** This Makefile violates RTEMS Makefile standards. -# This Makefile picks up sources from outside this directory -# and installs relocatible objects outside of this directory. -# This behavior is a work-around for RTEMS Makefile's missing -# ability to compile inside of directories containing subdirectories. -# This directory will disapear once automake will be introduced. -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../.. -subdir = hppa1.1/wrap - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@/.. - -RELS = ../$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = cpu -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_PIECES = -H_FILES = $(H_PIECES:%=$(srcdir)/../%) - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = cpu_asm rtems -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -I$(srcdir)/.. -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += ../$(ARCH) -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(ARCH)/rtems.o $(RELS) - $(INSTALL_VARIANT) -m 644 $(ARCH)/rtems.o $(PROJECT_RELEASE)/lib - -../$(ARCH)/rtems-cpu.rel: $(OBJS) - test -d ../$(ARCH) || mkdir ../$(ARCH) - $(make-rel) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL_CHANGE) -install: all - -preinstall: ${ARCH} - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/exec/score/cpu/i386/configure.in b/c/src/exec/score/cpu/i386/configure.in new file mode 100644 index 0000000000..de9384efd1 --- /dev/null +++ b/c/src/exec/score/cpu/i386/configure.in @@ -0,0 +1,40 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl $Id$ + +AC_PREREQ(2.13) +AC_INIT(cpu_asm.S) +RTEMS_TOP(../../../../../..) +AC_CONFIG_AUX_DIR(../../../../../..) + +RTEMS_CANONICAL_TARGET_CPU + +AM_INIT_AUTOMAKE(rtems-c-src-exec-score-cpu-i386,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_ENABLE_LIBCDIR + +RTEMS_ENV_RTEMSBSP + +RTEMS_CHECK_CPU +RTEMS_CANONICAL_HOST + +RTEMS_PROJECT_ROOT + +dnl check target cc +RTEMS_PROG_CC_FOR_TARGET +RTEMS_CANONICALIZE_TOOLS + +RTEMS_CHECK_NEWLIB + +# Check if there is custom/*.cfg for this BSP +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) + +PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include" +AC_SUBST(PROJECT_INCLUDE) + +# Try to explicitly list a Makefile here +AC_OUTPUT( +Makefile +rtems/Makefile +rtems/score/Makefile) diff --git a/c/src/exec/score/cpu/i386/wrap/Makefile.in b/c/src/exec/score/cpu/i386/wrap/Makefile.in deleted file mode 100644 index a63ec140f8..0000000000 --- a/c/src/exec/score/cpu/i386/wrap/Makefile.in +++ /dev/null @@ -1,90 +0,0 @@ -# -# $Id$ -# -# *** NOTE *** This Makefile violates RTEMS Makefile standards. -# This Makefile picks up sources from outside this directory -# and installs relocatible objects outside of this directory. -# This behavior is a work-around for RTEMS Makefile's missing -# ability to compile inside of directories containing subdirectories. -# This directory will disapear once automake will be introduced. -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../.. -subdir = i386/wrap - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@/.. - -RELS = ../$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = cpu -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_PIECES = asm.h -H_FILES = $(H_PIECES:%=$(srcdir)/../%) - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = cpu_asm -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -I$(srcdir)/.. -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += ../$(ARCH) -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(ARCH)/rtems.o $(RELS) - $(INSTALL_VARIANT) -m 644 $(ARCH)/rtems.o $(PROJECT_RELEASE)/lib - -../$(ARCH)/rtems-cpu.rel: $(OBJS) - test -d ../$(ARCH) || mkdir ../$(ARCH) - $(make-rel) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL_CHANGE) -install: all - -preinstall: ${ARCH} - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/exec/score/cpu/mips/configure.in b/c/src/exec/score/cpu/mips/configure.in new file mode 100644 index 0000000000..c26e7cb248 --- /dev/null +++ b/c/src/exec/score/cpu/mips/configure.in @@ -0,0 +1,40 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl $Id$ + +AC_PREREQ(2.13) +AC_INIT(cpu_asm.S) +RTEMS_TOP(../../../../../..) +AC_CONFIG_AUX_DIR(../../../../../..) + +RTEMS_CANONICAL_TARGET_CPU + +AM_INIT_AUTOMAKE(rtems-c-src-exec-score-cpu-mips64orion,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_ENABLE_LIBCDIR + +RTEMS_ENV_RTEMSBSP + +RTEMS_CHECK_CPU +RTEMS_CANONICAL_HOST + +RTEMS_PROJECT_ROOT + +dnl check target cc +RTEMS_PROG_CC_FOR_TARGET +RTEMS_CANONICALIZE_TOOLS + +RTEMS_CHECK_NEWLIB + +# Check if there is custom/*.cfg for this BSP +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) + +PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include" +AC_SUBST(PROJECT_INCLUDE) + +# Try to explicitly list a Makefile here +AC_OUTPUT( +Makefile +rtems/Makefile +rtems/score/Makefile) diff --git a/c/src/exec/score/cpu/mips64orion/configure.in b/c/src/exec/score/cpu/mips64orion/configure.in new file mode 100644 index 0000000000..c26e7cb248 --- /dev/null +++ b/c/src/exec/score/cpu/mips64orion/configure.in @@ -0,0 +1,40 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl $Id$ + +AC_PREREQ(2.13) +AC_INIT(cpu_asm.S) +RTEMS_TOP(../../../../../..) +AC_CONFIG_AUX_DIR(../../../../../..) + +RTEMS_CANONICAL_TARGET_CPU + +AM_INIT_AUTOMAKE(rtems-c-src-exec-score-cpu-mips64orion,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_ENABLE_LIBCDIR + +RTEMS_ENV_RTEMSBSP + +RTEMS_CHECK_CPU +RTEMS_CANONICAL_HOST + +RTEMS_PROJECT_ROOT + +dnl check target cc +RTEMS_PROG_CC_FOR_TARGET +RTEMS_CANONICALIZE_TOOLS + +RTEMS_CHECK_NEWLIB + +# Check if there is custom/*.cfg for this BSP +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) + +PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include" +AC_SUBST(PROJECT_INCLUDE) + +# Try to explicitly list a Makefile here +AC_OUTPUT( +Makefile +rtems/Makefile +rtems/score/Makefile) diff --git a/c/src/exec/score/cpu/mips64orion/wrap/Makefile.in b/c/src/exec/score/cpu/mips64orion/wrap/Makefile.in deleted file mode 100644 index 81327eb287..0000000000 --- a/c/src/exec/score/cpu/mips64orion/wrap/Makefile.in +++ /dev/null @@ -1,90 +0,0 @@ -# -# $Id$ -# -# *** NOTE *** This Makefile violates RTEMS Makefile standards. -# This Makefile picks up sources from outside this directory -# and installs relocatible objects outside of this directory. -# This behavior is a work-around for RTEMS Makefile's missing -# ability to compile inside of directories containing subdirectories. -# This directory will disapear once automake will be introduced. -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../.. -subdir = mips64orion/wrap - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@/.. - -RELS = ../$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = cpu -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_PIECES = asm.h cpu_asm.h idtcpu.h idtmon.h iregdef.h -H_FILES = $(H_PIECES:%=$(srcdir)/../%) - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = cpu_asm -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -I$(srcdir)/.. -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += ../$(ARCH) -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(ARCH)/rtems.o $(RELS) - $(INSTALL_VARIANT) -m 644 $(ARCH)/rtems.o $(PROJECT_RELEASE)/lib - -../$(ARCH)/rtems-cpu.rel: $(OBJS) - test -d ../$(ARCH) || mkdir ../$(ARCH) - $(make-rel) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL_CHANGE) -install: all - -preinstall: ${ARCH} - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/exec/score/cpu/no_cpu/configure.in b/c/src/exec/score/cpu/no_cpu/configure.in new file mode 100644 index 0000000000..30a1dbec38 --- /dev/null +++ b/c/src/exec/score/cpu/no_cpu/configure.in @@ -0,0 +1,40 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl $Id$ + +AC_PREREQ(2.13) +AC_INIT(cpu_asm.c) +RTEMS_TOP(../../../../../..) +AC_CONFIG_AUX_DIR(../../../../../..) + +RTEMS_CANONICAL_TARGET_CPU + +AM_INIT_AUTOMAKE(rtems-c-src-exec-score-cpu-sparc,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_ENABLE_LIBCDIR + +RTEMS_ENV_RTEMSBSP + +RTEMS_CHECK_CPU +RTEMS_CANONICAL_HOST + +RTEMS_PROJECT_ROOT + +dnl check target cc +RTEMS_PROG_CC_FOR_TARGET +RTEMS_CANONICALIZE_TOOLS + +RTEMS_CHECK_NEWLIB + +# Check if there is custom/*.cfg for this BSP +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) + +PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include" +AC_SUBST(PROJECT_INCLUDE) + +# Try to explicitly list a Makefile here +AC_OUTPUT( +Makefile +rtems/Makefile +rtems/score/Makefile) diff --git a/c/src/exec/score/cpu/no_cpu/wrap/Makefile.in b/c/src/exec/score/cpu/no_cpu/wrap/Makefile.in deleted file mode 100644 index 9889b8daa7..0000000000 --- a/c/src/exec/score/cpu/no_cpu/wrap/Makefile.in +++ /dev/null @@ -1,91 +0,0 @@ -# -# $Id$ -# -# *** NOTE *** This Makefile violates RTEMS Makefile standards. -# This Makefile picks up sources from outside this directory -# and installs relocatible objects outside of this directory. -# This behavior is a work-around for RTEMS Makefile's missing -# ability to compile inside of directories containing subdirectories. -# This directory will disapear once automake will be introduced. -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../.. -subdir = no_cpu/wrap - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@/.. - -RELS = ../$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES = cpu cpu_asm -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_PIECES = asm.h -H_FILES = $(H_PIECES:%=$(srcdir)/../%) - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -I$(srcdir)/.. -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += ../$(ARCH) -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) $(ARCH)/rtems.o $(RELS) - -$(ARCH)/rtems.o: rtems.c - -../$(ARCH)/rtems-cpu.rel: $(OBJS) - test -d ../$(ARCH) || mkdir ../$(ARCH) - $(make-rel) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL_CHANGE) -install: all - -preinstall: ${ARCH} - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -- cgit v1.2.3