From eb299afca294da0998dbb53893f0ce5cb35f0f8b Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Mon, 26 Jul 1999 20:20:22 +0000 Subject: This is part of a major patch from Ralf Corsepius to move RTEMS more to automake/autoconf and GNU compliance. Finally, here they are: the "big-patch" patches - merged into one big patch (~1.5MB). Sorry for the delay, but testing took much more time than I had expected - esp. reworking the acpolish script triggered many more tiny issues than I had expected (cf. below). At least, now you've got something to spend your weekend with :-. WARNINGS: * I've gone a little (??) further than I had announced before. * Several directories have been moved. * Several files have been added and removed * I have tested it with many BSPs/CPUs and a variety of permutiations of configuration flags, but not with all. * Most parts of the patch are automatically generated, however there are many tiny manual modifications. APPLYING THE PATCH: ./autogen -c mkdir tools mv c/src/exec/score/tools tools/cpu mv c/build-tools tools/build mv c/update-tools tools/update patch -p1 -E < rtems-rc-19990709-0.diff ./autogen If the patch doesn't apply to rtems-cvs, I would suggest that you should try to apply it brute-force and then to run tools/update/rtems-polish.sh -ac -am afterwards. A recursive diff between rtems-19990709 + patch and rtems-cvs + patch then should report only a few dozen significant changes to configuration files which need to be merged manually (IIRC, I did not change any source files). *** Attention: There are files to be removed, moved, copied and added in/to CVS! NEWS/CHANGES: 1. Configuration takes place in 3 stages: 1. per host (toplevel configure script), 2. per target (c/configure), 3. per bsp c/src/configure automatically triggered from ./configure and c/Makefile.am. 2. Building of subdirectory c/ takes place in c/$(target_alias) for cross-targets in c/ for native targets 3. Building of subdirectory c/src takes place in c/${target_alias}/ for cross-targets, c/ for native targets 4. c/build-tools moved to tools/build 5. c/src/exec/score/cpu/tools moved to tools/cpu (=cpu-tools split out) 6. c/update-tools moved to tools/update 7. New subdirectory c/src/make, handles files from make/ on a per BSP basis 8. Maintainer mode support: Ie. if configuring with --enable-maintainer-mode disabled (the default), then tracking of many dependencies will be disabled in Makefiles. Esp. many dependencies for auto* generated files will be switched off in Makefiles. Ie. if not using "--enable-maintainer-mode" many auto* generated files will not be updated automatically, i.e. normal users should not be required to have auto* tools anymore (untested). 9. Independent configuration scripts for / (toplevel), tools/build, tools/cpu, tools/update, c/, c/src/, c/src/exec, c/src/lib, c/src/tests, c/src/make 10. Automake support for all directories above and besides c/src 11. "preinstall" now is implemented as depth-first recursive make target 12. host compiled tools (exception bsp-tools) are accessed in location in the build tree instead of inside the build-tree when building RTEMS. 13. RTEMS_ROOT and PROJECT_ROOT now point to directories inside the build-tree - many tiny changes as consequence from this. 14. --with-cross-host support removed (offically announced obsolete by cygnus) 15. Changing the order of building libraries below c/src/lib/ 16. Former toplevel configure script broken into aclocal/*.m4 macros 17. Newlib now detected by configure macros, RTEMS_HAS_NEWLIB removed from *cfg. 18. sptables.h now generated by autoconf 19. Rules for "mkinstalldirs temporary installation tree" moved from c/Makefile to subdirectories. 20. Cpu-tools do not get installed. 21. FIX: Use ACLOCAL_AMFLAGS instead of ACLOCAL = -I ... in Makefile.ams which are in directories with own configure scripts. 22. Hardcoding BSP names into libbsp/.../tools to avoid RTEMS_BSP get overridden from the environment. 22. FIX: Handling of MP_PIECES in various Makefiles 23. FIX: Removing "::" rules from some Makefile.ins 24. FIX: File permission chaos: (-m 444 and -m 555 vs. -m 644 and -m 755) - Now all include files use -m 644. 25. Removed many gnumake-conditionals in Makefile.ins - Partially replaced with automake-conditional, partially replaced with conditionalized Makefile variables (... _yes_V) 26. Massively reworked acpolish: acpolish now parses Makefile.ins and interprets parts of the Makefile.ins. 27. FIX: Some $(wildcard $(srcdir)/*.h) macros removed / replaced with explicit lists of files in Makefile.ins. 28. FIX: Replacing MKLIB with RANLIB in Makefile.ins 29. HACK: Add preinstallation for pc386 specific $(PROJECT_RELEASE)/BootImgs directory ... many more details, I can't recall KNOWN BUGS: 1. make [debug|profile]_install do not do what they are promissing. "make [debug|profile] install" does what "make [debug|profile]_install" has been doing. Proposal: remove [debug|profile]_install 2. Dependencies between temporary installation tree and source tree are not yet handled correctly. 3. Dependencies between temporary installation tree and source tree are handled ineffencently (Using INSTALL_CHANGE instead of make dependencies) 4. RTEMS_ROOT, PROJECT_ROOT, top_builddir, RTEMS_TOPdir now are redundant. 5. The new configure scripts still are in their infancy. They contain redundant checks and might still contain bugs, too. 6. RTEMS autoconf Makefile.ins use a mixture of configuration information gathered in c/$(target_alias)//make and of information collected from their configure scripts. 7. make dist is not fully functional 8. Subdirectory host-/build-/target- configure options (--target, --host, --build) do not conform to Cygnus/GNU conventions. 9. Some RTEMS autoconf Makefile.in's makefile targets are not supported in automake Makefile.ams/ins (e.g. get, clobber). 10. Some automake standard targets are not propagated from toplevel and c/Makefile.am to autoconf subdirectories (eg. make dist). 11. rpcgen generated files are not part of the source-tree (Automake conventions favor supplying generated files inside the source-tree, however there is no support for rpcgen generated files in automake, cf. yacc/lex support in automake). 12. RTEMS_HAS_RDBG handling is flaky. make/*.cfg use RTEMS_HAS_RDBG per CPU, while librdb's sources can only be built per BSP. Raises the more general question whether librdbg located correctly in the source-tree. 13. All make/*cfg files are configured per cpu, currently there is no location to store per-bsp configuration information --> bsp.cfg, per aconfig.h? 14. "make install" without having run "make all" beforehand does not work. 15. handling of --enable-multiprocessing seems to be broken in make/custom/* 16. Makefile.ins still exploit many gmake features. 17. File permisson chaos on libraries (no explict -m for libraries/rels/etc). 18. mcp750 Makefiles are broken (Note: I *do* mean buggy - I am not talking about "not-conforming to conventions", here :-). 19. Dependencies between configure scripts are not handled, eg. aborting "make RTEMS_BSP=" can leave the build-tree in an unusable state. 20. "make clean" does not delete /. This is intentional for now, because rerunning "make" after "make clean" requires an explicit "make preinstall" afterwards now. This should be done automatically, but doesn't work in this case for now. To work around this problem / is kept during "make clean" for now (HACK). TODO: 1. split out host-compiled bsp-tools 2. Use Cygnus/GNU standards for cross-compiling target-subdir (CC=CC_FOR_TARGET .. configure --host=${target_alias} --build=`config.guess'}), to be added to toplevel configure script after splitting out bsp-tools. 3. Exploit per cpu support directory (c/src/)- Splitting out per-cpu libraries - Are there any? 4. Further automake support 5. Converting subdirectories into standalone / self-contained subdirectories (Esp. moving their headers to the same common root as their sources, eg. mv lib/include/rtems++ lib/librtems++/include/rtems++) - This is the main obstacle which prevents moving further towards automake. 6. Propagating values from *.cfg into Makefiles instead of propagating them at make time via Makefile-fragments (i.e. try to avoid using *.cfg). 7. Testing on cygwin host (I *do* expect cygwin specific problems). 8. The ARCH in o-$(ARCH)-$(VARIANT) build-subdirectories is not needed anymore. GENERAL ISSUES: 1. Temporary installation tree -- Ian and I seem to disagree basically. Though I think that I understand his argumentation, I do not share it. IMO, his way of using the buildtree is mis-using the build-tree, relying on an inofficial feature of RTEMS's current implementation, which doesn't even work correctly in the current build-tree, though it attempts hard to do so. From my very POV, it unnecessarily complicates the structures of the source- and build-trees. It is not supported by automake (No automatic generation for the necessary rules) and complicates the transition to automake significantly (Generating the rules with an enhanced version of acpolish could be possible). As Ian correctly pointed out, here a management decision is needed - though I don't see the need to draw this decision in short terms. 2. preinstallation generally is a sure means to spoil the structure of the source tree, IMHO (No ranting intended, I am completly serious about this one). eg. through tree dependencies. The worst problem related to this I have found in the meantime is bsp_specs. bsp_specs is part of libbsp, ie. there is *no* way to build *any* part of the source tree *without* having a BSP *preinstalled*. Note: This issue is related to issue 1., but is not identical - The difference is the change of the order make rules have to be triggered. While preinstallation triggers rules spread all over the source tree before a "make all" can be run, a temporary installation tree could also be installed by post "make all" hooks (all-local:, to be run after make all in a directory is completed) if the directories' dependencies would be a tree, 3. Stuctural dependencies between subdirectories. 4. Depth of the source tree (Prevents multilibbing and introduces many unnecessary configure scripts). 5. per cpu vs. per bsp configuration (There are no real per-cpu parts yets :-). 6. automake does not support $makefiles in AC_OUTPUT. Unlike before, we now should try to avoid RTEMS_CHECK_MAKEFILE and to hard-code as much paths to Makefiles as possible. 7. General redesign of the source tree 8. Main installation point - Changing it to ${prefix}/${target_alias}. ? Besides item 8. (which is a must, IMHO), as far as I see most of them can not be solved soon and will remain issues in the mid- to long-term :-. REMARKS: * You (as the maintainer) should always use --enable-maintainer-mode when building RTEMS to ensure that maintainer mode generated files (esp. those in c/src/make) will be updated when make/* files have changed. * Use @RTEMS_BSP@ in Makefile.ins and Makefile.ams below c/src/, $(RTEMS_BSP) or ${RTEMS_BSP} will be overridden from environment variables when using make RTEMS_BSP="....". * c/src/make is a temporary cludge until configuration issues are solved. At the moment it is configured per bsp, but contains per-target/cpu info only. Its main purpose now is to circumvent modifying make/*.cfg files, because I consider make/* to be frozen for backward compatibilty. * This patch should only affect configuration files. At least I do not remember having touched any source files. * To build the bare bsp you now need to mention it in --enable-rtemsbsp. Example: building gensh1 and sh1/bare simultaneously: ../rtems-rc-19990709-1/configure --target=sh-rtems \ --enable-rtemsbsp="bare gensh1" \ --prefix=/tmp/rtems \ --enable-bare-cpu-cflags='-DMHZ=20 -m1 -DCPU_CONSOLE_DEVNAME=\"/dev/null\"' \ --enable-bare-cpu-model=sh7032 \ --enable-maintainer-mode \ --enable-cxx make make install * The next steps in development would be to split out bsp-tools and then to change to Cygnus/GNU canonicalization conventions for building the c/ subdirectory afterwards (i.e. many standard AC_*.m4 macros could be used instead of customized versions) FINAL REMARK: The issues mentioned in the lists above sound much worser than the situation actually is. Most of them are not specific to this patch, but are also valid for the snapshot. I just wrote down what I came across when working on the patch over the last few weeks. I wouldn't be too surprised if you don't like the patch at the current point in development. I am willing to discuss details and problems, I also have no problem if you would post-pone applying this patch to times after 4.1, but rejecting it as a whole for all times would be a false management decision, IMHO. Therefore I would suggest that you, if your time constaints allow it, should at least play a little while with this patch to understand what is going on and before drawing a decision on how to handle this proposal. I know this patch is neither perfect nor complete, but I consider it to be a major breakthrough. Don't be anxious because of the size of the patch, the core of the patch is rather small, the size is mainly the side effect of some systematic cleanups inside the Makefiles (result of acpolish). Feel free to ask if you encounter problems, if you don't understand something or if you meet bugs - I am far from being perfect and am prepared to answer them. Ralf. -- Ralf Corsepius Forschungsinstitut fuer Anwendungsorientierte Wissensverarbeitung (FAW) Helmholtzstr. 16, 89081 Ulm, Germany Tel: +49/731/501-8690 mailto:corsepiu@faw.uni-ulm.de FAX: +49/731/501-999 http://www.faw.uni-ulm.de --- c/src/make/Makefile.am | 48 + c/src/make/Makefile.in | 538 ++++++ c/src/make/Makefile.inc.in | 50 + c/src/make/Templates/Makefile.am | 15 + c/src/make/Templates/Makefile.dir | 9 + c/src/make/Templates/Makefile.in | 286 +++ c/src/make/Templates/Makefile.leaf | 77 + c/src/make/Templates/Makefile.lib | 59 + c/src/make/aclocal.m4 | 954 ++++++++++ c/src/make/compilers/Makefile.am | 21 + c/src/make/compilers/Makefile.in | 293 ++++ c/src/make/compilers/gcc.cfg.in | 203 +++ c/src/make/configure | 3399 ++++++++++++++++++++++++++++++++++++ c/src/make/configure.in | 139 ++ c/src/make/custom/Makefile.am | 19 + c/src/make/custom/Makefile.in | 291 +++ c/src/make/custom/default.cfg.in | 86 + c/src/make/main.cfg.in | 73 + c/src/make/target.cfg.in | 72 + 19 files changed, 6632 insertions(+) create mode 100644 c/src/make/Makefile.am create mode 100644 c/src/make/Makefile.in create mode 100644 c/src/make/Makefile.inc.in create mode 100644 c/src/make/Templates/Makefile.am create mode 100644 c/src/make/Templates/Makefile.dir create mode 100644 c/src/make/Templates/Makefile.in create mode 100644 c/src/make/Templates/Makefile.leaf create mode 100644 c/src/make/Templates/Makefile.lib create mode 100644 c/src/make/aclocal.m4 create mode 100644 c/src/make/compilers/Makefile.am create mode 100644 c/src/make/compilers/Makefile.in create mode 100644 c/src/make/compilers/gcc.cfg.in create mode 100644 c/src/make/configure create mode 100644 c/src/make/configure.in create mode 100644 c/src/make/custom/Makefile.am create mode 100644 c/src/make/custom/Makefile.in create mode 100644 c/src/make/custom/default.cfg.in create mode 100644 c/src/make/main.cfg.in create mode 100644 c/src/make/target.cfg.in (limited to 'c/src/make') diff --git a/c/src/make/Makefile.am b/c/src/make/Makefile.am new file mode 100644 index 0000000000..dfc6f5cdde --- /dev/null +++ b/c/src/make/Makefile.am @@ -0,0 +1,48 @@ +# +# $Id$ +# + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +rtems_makedir=$(prefix)/make + +GENERIC_FILES = \ +host.cfg target.cfg + +MAKE_FILES = README \ +directory.cfg leaf.cfg \ +lib.cfg + +rtems_make_DATA = \ +$(MAKE_FILES) \ +$(GENERIC_FILES) + +noinst_DATA = \ +main.cfg + +rtemsdir = $(prefix) +rtems_bspdir = $(rtemsdir)/@RTEMS_BSP@ +rtems_bsp_DATA = \ +Makefile.inc + +if MAINTAINER_MODE +$(srcdir)/main.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/main.cfg + sed -e 's%\$$(RTEMS_BSP)%\@RTEMS_BSP\@%g' < $< >$@ + +$(srcdir)/Makefile.inc.in: $(top_srcdir)/@RTEMS_TOPdir@/make/Templates/Makefile.inc.in + echo "RTEMS_BSP = @""RTEMS_BSP@" > $@ + echo "" >> $@ + cat $< >> $@ + +$(srcdir)/host.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/host.cfg.in + cp $< $@ + +$(srcdir)/target.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/target.cfg.in + cp $< $@ +endif + +SUBDIRS = compilers custom Templates + +include $(top_srcdir)/../../../automake/subdirs.am +include $(top_srcdir)/../../../automake/local.am diff --git a/c/src/make/Makefile.in b/c/src/make/Makefile.in new file mode 100644 index 0000000000..4b777d98ad --- /dev/null +++ b/c/src/make/Makefile.in @@ -0,0 +1,538 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# +# $Id$ +# + + + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@ +BARE_CPU_MODEL = @BARE_CPU_MODEL@ +CAT = @CAT@ +CC = @CC@ +CC_CFLAGS_DEBUG_V = @CC_CFLAGS_DEBUG_V@ +CC_CFLAGS_DEFAULT = @CC_CFLAGS_DEFAULT@ +CC_CFLAGS_PROFILE_V = @CC_CFLAGS_PROFILE_V@ +CC_FOR_TARGET = @CC_FOR_TARGET@ +CC_LDFLAGS_PROFILE_V = @CC_LDFLAGS_PROFILE_V@ +CHMOD = @CHMOD@ +CMP = @CMP@ +CP = @CP@ +CPP = @CPP@ +CUSTOM_CFG_FILES = @CUSTOM_CFG_FILES@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXX_FOR_TARGET = @CXX_FOR_TARGET@ +GCCSED = @GCCSED@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +KSH = @KSH@ +LN = @LN@ +LN_S = @LN_S@ +M4 = @M4@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MV = @MV@ +PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ +PERL = @PERL@ +PROJECT_ROOT = @PROJECT_ROOT@ +RM = @RM@ +RTEMS_BSP = @RTEMS_BSP@ +RTEMS_CPU = @RTEMS_CPU@ +RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ +RTEMS_HAS_CPLUSPLUS = @RTEMS_HAS_CPLUSPLUS@ +RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@ +RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@ +RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@ +RTEMS_HAS_RDBG = @RTEMS_HAS_RDBG@ +RTEMS_HOST = @RTEMS_HOST@ +RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@ +RTEMS_ROOT = @RTEMS_ROOT@ +RTEMS_TOPdir = @RTEMS_TOPdir@ +RTEMS_USE_GCC272 = @RTEMS_USE_GCC272@ +RTEMS_USE_MACROS = @RTEMS_USE_MACROS@ +SED = @SED@ +SORT = @SORT@ +TOUCH = @TOUCH@ +VERSION = @VERSION@ +program_prefix = @program_prefix@ +rtems_cv_prog_cc_cross = @rtems_cv_prog_cc_cross@ + +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +rtems_makedir = $(prefix)/make + +GENERIC_FILES = host.cfg target.cfg + + +MAKE_FILES = README directory.cfg leaf.cfg lib.cfg + + +rtems_make_DATA = $(MAKE_FILES) $(GENERIC_FILES) + + +noinst_DATA = main.cfg + + +rtemsdir = $(prefix) +rtems_bspdir = $(rtemsdir)/@RTEMS_BSP@ +rtems_bsp_DATA = Makefile.inc + + +SUBDIRS = compilers custom Templates +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs +CONFIG_CLEAN_FILES = Makefile.inc main.cfg host.cfg target.cfg +DATA = $(noinst_DATA) $(rtems_bsp_DATA) $(rtems_make_DATA) + +DIST_COMMON = Makefile.am Makefile.in Makefile.inc.in aclocal.m4 \ +configure configure.in host.cfg.in main.cfg.in target.cfg.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../automake/subdirs.am $(top_srcdir)/../../../automake/local.am + cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) +Makefile.inc: $(top_builddir)/config.status Makefile.inc.in + cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status +main.cfg: $(top_builddir)/config.status main.cfg.in + cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status +host.cfg: $(top_builddir)/config.status host.cfg.in + cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status +target.cfg: $(top_builddir)/config.status target.cfg.in + cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +install-rtems_bspDATA: $(rtems_bsp_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(rtems_bspdir) + @list='$(rtems_bsp_DATA)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_bspdir)/$$p"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_bspdir)/$$p; \ + else if test -f $$p; then \ + echo " $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_bspdir)/$$p"; \ + $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_bspdir)/$$p; \ + fi; fi; \ + done + +uninstall-rtems_bspDATA: + @$(NORMAL_UNINSTALL) + list='$(rtems_bsp_DATA)'; for p in $$list; do \ + rm -f $(DESTDIR)$(rtems_bspdir)/$$p; \ + done + +install-rtems_makeDATA: $(rtems_make_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(rtems_makedir) + @list='$(rtems_make_DATA)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_makedir)/$$p"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_makedir)/$$p; \ + else if test -f $$p; then \ + echo " $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_makedir)/$$p"; \ + $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_makedir)/$$p; \ + fi; fi; \ + done + +uninstall-rtems_makeDATA: + @$(NORMAL_UNINSTALL) + list='$(rtems_make_DATA)'; for p in $$list; do \ + rm -f $(DESTDIR)$(rtems_makedir)/$$p; \ + done + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" = "." && dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ + done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: install-rtems_bspDATA install-rtems_makeDATA +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: uninstall-rtems_bspDATA uninstall-rtems_makeDATA +uninstall: uninstall-recursive +all-am: Makefile $(DATA) +all-redirect: all-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + $(mkinstalldirs) $(DESTDIR)$(rtems_bspdir) $(DESTDIR)$(rtems_makedir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-tags distclean-generic clean-am + +distclean: distclean-recursive + -rm -f config.status + +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + -rm -f config.status + +.PHONY: uninstall-rtems_bspDATA install-rtems_bspDATA \ +uninstall-rtems_makeDATA install-rtems_makeDATA install-data-recursive \ +uninstall-data-recursive install-exec-recursive \ +uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +all-recursive check-recursive installcheck-recursive info-recursive \ +dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +@MAINTAINER_MODE_TRUE@$(srcdir)/main.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/main.cfg +@MAINTAINER_MODE_TRUE@ sed -e 's%\$$(RTEMS_BSP)%\@RTEMS_BSP\@%g' < $< >$@ + +@MAINTAINER_MODE_TRUE@$(srcdir)/Makefile.inc.in: $(top_srcdir)/@RTEMS_TOPdir@/make/Templates/Makefile.inc.in +@MAINTAINER_MODE_TRUE@ echo "RTEMS_BSP = @""RTEMS_BSP@" > $@ +@MAINTAINER_MODE_TRUE@ echo "" >> $@ +@MAINTAINER_MODE_TRUE@ cat $< >> $@ + +@MAINTAINER_MODE_TRUE@$(srcdir)/host.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/host.cfg.in +@MAINTAINER_MODE_TRUE@ cp $< $@ + +@MAINTAINER_MODE_TRUE@$(srcdir)/target.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/target.cfg.in +@MAINTAINER_MODE_TRUE@ cp $< $@ + +depend-recursive \ +clobber-recursive \ +preinstall-recursive \ +debug-recursive \ +debug_install-recursive \ +profile-recursive \ +profile_install-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +debug: debug-recursive +.PHONY: debug-recursive + +debug_install: debug_install-recursive +.PHONY: debug_install-recursive + +profile: profile-recursive +.PHONY: profile-recursive + +profile_install: profile_install-recursive +.PHONY: profile-recursive + +preinstall: preinstall-recursive +.PHONY: preinstall-recursive + +clobber: clobber-recursive +.PHONY: clobber-recursive + +depend: depend-recursive +.PHONY: depend-recursive + +debug-am: +debug: debug-am +.PHONY: debug debug-am + +debug_install-am: +debug_install: debug_install-am +.PHONY: debug_install debug_install-am + +profile-am: +profile: profile-am +.PHONY: profile profile-am + +profile_install-am: +profile_install: profile_install-am +.PHONY: profile_install profile_install-am + +preinstall-am: +preinstall: preinstall-am +.PHONY: preinstall preinstall-am + +clobber-am: +clobber: clobber-am +.PHONY: clobber clobber-am + +depend-am: +depend: depend-am +.PHONY: depend depend-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/c/src/make/Makefile.inc.in b/c/src/make/Makefile.inc.in new file mode 100644 index 0000000000..a908cb18bf --- /dev/null +++ b/c/src/make/Makefile.inc.in @@ -0,0 +1,50 @@ +RTEMS_BSP = @RTEMS_BSP@ + +# +# +# Target specific settings. To be included in application Makefiles. +# + +prefix = @prefix@ + +CC_FOR_TARGET = @program_prefix@gcc +AS_FOR_TARGET = @program_prefix@as +AR_FOR_TARGET = @program_prefix@ar +NM_FOR_TARGET = @program_prefix@nm +LD_FOR_TARGET = @program_prefix@ld +SIZE_FOR_TARGET = @program_prefix@size +OBJCOPY_FOR_TARGET = @program_prefix@objcopy + +CC= $(CC_FOR_TARGET) +AS= $(AS_FOR_TARGET) +LD= $(LD_FOR_TARGET) +NM= $(NM_FOR_TARGET) +AR= $(AR_FOR_TARGET) +SIZE= $(SIZE_FOR_TARGET) +OBJCOPY= $(OBJCOPY_FOR_TARGET) + +export CC +export AS +export LD +export NM +export AR +export SIZE +export OBJCOPY + +RTEMS_HOST = @RTEMS_HOST@ +RTEMS_CUSTOM = $(prefix)/make/custom/$(RTEMS_BSP).cfg +PROJECT_ROOT = $(prefix)/ +RTEMS_USE_OWN_PDIR = no +RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@ +RTEMS_USE_MACROS = @RTEMS_USE_MACROS@ +RTEMS_HAS_CPLUSPLUS = @RTEMS_HAS_CPLUSPLUS@ +RTEMS_USE_GCC272 = @RTEMS_USE_GCC272@ +RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@ + +export RTEMS_BSP +export RTEMS_CUSTOM +export PROJECT_ROOT + +# FIXME: The following shouldn't be here +RTEMS_ROOT = $(PROJECT_ROOT) +export RTEMS_ROOT diff --git a/c/src/make/Templates/Makefile.am b/c/src/make/Templates/Makefile.am new file mode 100644 index 0000000000..de2fb5d1dd --- /dev/null +++ b/c/src/make/Templates/Makefile.am @@ -0,0 +1,15 @@ +# +# $Id$ +# + +AUTOMAKE_OPTIONS = foreign 1.4 + +rtems_makedir=$(prefix)/make +rtems_make_Templatesdir=$(rtems_makedir)/Templates + +rtems_make_Templates_DATA = \ +Makefile.dir \ +Makefile.leaf \ +Makefile.lib + +include $(top_srcdir)/../../../automake/local.am diff --git a/c/src/make/Templates/Makefile.dir b/c/src/make/Templates/Makefile.dir new file mode 100644 index 0000000000..e70d40c0cb --- /dev/null +++ b/c/src/make/Templates/Makefile.dir @@ -0,0 +1,9 @@ +# +# $Id$ +# + +include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/directory.cfg + +SUB_DIRS=a b c your-directories-go-here + diff --git a/c/src/make/Templates/Makefile.in b/c/src/make/Templates/Makefile.in new file mode 100644 index 0000000000..b620949339 --- /dev/null +++ b/c/src/make/Templates/Makefile.in @@ -0,0 +1,286 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# +# $Id$ +# + + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = .. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@ +BARE_CPU_MODEL = @BARE_CPU_MODEL@ +CAT = @CAT@ +CC = @CC@ +CC_CFLAGS_DEBUG_V = @CC_CFLAGS_DEBUG_V@ +CC_CFLAGS_DEFAULT = @CC_CFLAGS_DEFAULT@ +CC_CFLAGS_PROFILE_V = @CC_CFLAGS_PROFILE_V@ +CC_FOR_TARGET = @CC_FOR_TARGET@ +CC_LDFLAGS_PROFILE_V = @CC_LDFLAGS_PROFILE_V@ +CHMOD = @CHMOD@ +CMP = @CMP@ +CP = @CP@ +CPP = @CPP@ +CUSTOM_CFG_FILES = @CUSTOM_CFG_FILES@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXX_FOR_TARGET = @CXX_FOR_TARGET@ +GCCSED = @GCCSED@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +KSH = @KSH@ +LN = @LN@ +LN_S = @LN_S@ +M4 = @M4@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MV = @MV@ +PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ +PERL = @PERL@ +PROJECT_ROOT = @PROJECT_ROOT@ +RM = @RM@ +RTEMS_BSP = @RTEMS_BSP@ +RTEMS_CPU = @RTEMS_CPU@ +RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ +RTEMS_HAS_CPLUSPLUS = @RTEMS_HAS_CPLUSPLUS@ +RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@ +RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@ +RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@ +RTEMS_HAS_RDBG = @RTEMS_HAS_RDBG@ +RTEMS_HOST = @RTEMS_HOST@ +RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@ +RTEMS_ROOT = @RTEMS_ROOT@ +RTEMS_TOPdir = @RTEMS_TOPdir@ +RTEMS_USE_GCC272 = @RTEMS_USE_GCC272@ +RTEMS_USE_MACROS = @RTEMS_USE_MACROS@ +SED = @SED@ +SORT = @SORT@ +TOUCH = @TOUCH@ +VERSION = @VERSION@ +program_prefix = @program_prefix@ +rtems_cv_prog_cc_cross = @rtems_cv_prog_cc_cross@ + +AUTOMAKE_OPTIONS = foreign 1.4 + +rtems_makedir = $(prefix)/make +rtems_make_Templatesdir = $(rtems_makedir)/Templates + +rtems_make_Templates_DATA = Makefile.dir Makefile.leaf Makefile.lib + +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs +CONFIG_CLEAN_FILES = +DATA = $(rtems_make_Templates_DATA) + +DIST_COMMON = Makefile.am Makefile.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../automake/local.am + cd $(top_srcdir) && $(AUTOMAKE) --foreign Templates/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +install-rtems_make_TemplatesDATA: $(rtems_make_Templates_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(rtems_make_Templatesdir) + @list='$(rtems_make_Templates_DATA)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_make_Templatesdir)/$$p"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_make_Templatesdir)/$$p; \ + else if test -f $$p; then \ + echo " $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_make_Templatesdir)/$$p"; \ + $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_make_Templatesdir)/$$p; \ + fi; fi; \ + done + +uninstall-rtems_make_TemplatesDATA: + @$(NORMAL_UNINSTALL) + list='$(rtems_make_Templates_DATA)'; for p in $$list; do \ + rm -f $(DESTDIR)$(rtems_make_Templatesdir)/$$p; \ + done +tags: TAGS +TAGS: + + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = Templates + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Templates/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: install-rtems_make_TemplatesDATA +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-rtems_make_TemplatesDATA +uninstall: uninstall-am +all-am: Makefile $(DATA) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(rtems_make_Templatesdir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-generic clean-am + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: uninstall-rtems_make_TemplatesDATA \ +install-rtems_make_TemplatesDATA tags distdir info-am info dvi-am dvi \ +check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +debug-am: +debug: debug-am +.PHONY: debug debug-am + +debug_install-am: +debug_install: debug_install-am +.PHONY: debug_install debug_install-am + +profile-am: +profile: profile-am +.PHONY: profile profile-am + +profile_install-am: +profile_install: profile_install-am +.PHONY: profile_install profile_install-am + +preinstall-am: +preinstall: preinstall-am +.PHONY: preinstall preinstall-am + +clobber-am: +clobber: clobber-am +.PHONY: clobber clobber-am + +depend-am: +depend: depend-am +.PHONY: depend depend-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/c/src/make/Templates/Makefile.leaf b/c/src/make/Templates/Makefile.leaf new file mode 100644 index 0000000000..b4c879529f --- /dev/null +++ b/c/src/make/Templates/Makefile.leaf @@ -0,0 +1,77 @@ +# +# $Id$ +# +# Templates/Makefile.leaf +# Template leaf node Makefile +# + +# C source names, if any, go here -- minus the .c +C_PIECES=xxxd xxxe xxxf +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +# C++ source names, if any, go here -- minus the .cc +CC_PIECES=xxxa xxxb xxxc +CC_FILES=$(CC_PIECES:%=%.cc) +CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .S +S_PIECES= +S_FILES=$(S_PIECES:%=%.S) +S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +PGMS=${ARCH}/xxx-your-program-here ${ARCH}/xxx-another-one + +# List of RTEMS managers to be included in the application goes here. +# Use: +# MANAGERS=all +# to include all RTEMS managers in the application. +MANAGERS=io event message rate_monotonic semaphore timer, etc. + + +include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/leaf.cfg + +# +# (OPTIONAL) Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +# +# CFLAGS_DEBUG_V are used when the `make debug' target is built. +# To link your application with the non-optimized RTEMS routines, +# uncomment the following line: +# CFLAGS_DEBUG_V += -qrtems_debug +# + +LD_PATHS += xxx-your-EXTRA-library-paths-go-here, if any +LD_LIBS += xxx-your-libraries-go-here eg: -lvx +LDFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += xxx-your-debris-goes-here +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(PGMS) + +${ARCH}/xxx-your-program-here: ${OBJS} ${LINK_FILES} + $(make-exe) + +# Install the program(s), appending _g or _p as appropriate. +# for include files, just use $(INSTALL_CHANGE) +install: all + $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/bin diff --git a/c/src/make/Templates/Makefile.lib b/c/src/make/Templates/Makefile.lib new file mode 100644 index 0000000000..9127ea70de --- /dev/null +++ b/c/src/make/Templates/Makefile.lib @@ -0,0 +1,59 @@ +# +# $Id$ +# +# Templates/Makefile.lib +# Template library Makefile +# + +LIBNAME=libfoo.a # xxx- your library names goes here +LIB=${ARCH}/${LIBNAME} + +# C and C++ source names, if any, go here -- minus the .c or .cc +C_PIECES=xxxd xxxe xxxf +C_FILES=$(C_PIECES:%=%.c) +C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) + +CC_PIECES=xxxa xxxb xxxc +CC_FILES=$(CC_PIECES:%=%.cc) +CC_O_FILES=$(CC_PIECES:%=${ARCH}/%.o) + +H_FILES= + +# Assembly source names, if any, go here -- minus the .S +S_PIECES= +S_FILES=$(S_PIECES:%=%.S) +S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) + +SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) + +include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/lib.cfg + +# +# Add local stuff here using += +# + +DEFINES += +CPPFLAGS += +CFLAGS += + +# +# Add your list of files to delete here. The config files +# already know how to delete some stuff, so you may want +# to just run 'make clean' first to see what gets missed. +# 'make clobber' already includes 'make clean' +# + +CLEAN_ADDITIONS += xxx-your-debris-goes-here +CLOBBER_ADDITIONS += + +all: ${ARCH} $(SRCS) $(LIB) + +$(LIB): ${OBJS} + $(make-library) + +# Install the library, appending _g or _p as appropriate. +# for include files, just use $(INSTALL_CHANGE) +install: all + $(INSTALL_VARIANT) -m 644 ${LIB} ${PROJECT_RELEASE}/lib diff --git a/c/src/make/aclocal.m4 b/c/src/make/aclocal.m4 new file mode 100644 index 0000000000..dbae555199 --- /dev/null +++ b/c/src/make/aclocal.m4 @@ -0,0 +1,954 @@ +dnl aclocal.m4 generated automatically by aclocal 1.4 + +dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + +dnl $Id$ + +dnl +dnl RTEMS_TOP($1) +dnl +dnl $1 .. relative path from this configure.in to the toplevel configure.in +dnl +AC_DEFUN(RTEMS_TOP, +[dnl +AC_ARG_WITH(target-subdir, +[ --with-target-subdir=DIR], +TARGET_SUBDIR="$withval", +TARGET_SUBDIR=".") + +RTEMS_TOPdir="$1"; +AC_SUBST(RTEMS_TOPdir) + +dnl Determine RTEMS Version string from the VERSION file +dnl Hopefully, Joel never changes its format ;- +AC_MSG_CHECKING([for RTEMS Version]) +if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then +changequote(,)dnl +RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ +sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` +changequote([,])dnl +else +AC_MSG_ERROR(Unable to find ${RTEMS_TOPdir}/VERSION) +fi +if test -z "$RTEMS_VERSION"; then +AC_MSG_ERROR(Unable to determine version) +fi +AC_MSG_RESULT($RTEMS_VERSION) +])dnl + +dnl +dnl $Id$ +dnl + +dnl canonicalize target cpu +dnl NOTE: Most rtems targets do not fullfil autoconf's +dnl target naming conventions "processor-vendor-os" +dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them +dnl and we have to fix it for rtems ourselves + +AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU, +[ +AC_CANONICAL_SYSTEM +AC_MSG_CHECKING(rtems target cpu) +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_CPU=i386 + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_CPU=unix + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_CPU=unix + ;; + no_cpu-*rtems*) + RTEMS_CPU=no_cpu + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_CPU=unix + ;; + *) + RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_CPU) +AC_MSG_RESULT($RTEMS_CPU) +]) + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN(AM_INIT_AUTOMAKE, +[AC_REQUIRE([AC_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_REQUIRE([AC_PROG_MAKE_SET])]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN(AM_SANITY_CHECK, +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "[$]*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN(AM_MISSING_PROG, +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_MULTIPROCESSING, +[ +AC_ARG_ENABLE(multiprocessing, +[ --enable-multiprocessing enable multiprocessing interface], +[case "${enableval}" in + yes) RTEMS_HAS_MULTIPROCESSING=yes ;; + no) RTEMS_HAS_MULTIPROCESSING=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-multiprocessing option) ;; +esac],[RTEMS_HAS_MULTIPROCESSING=no]) +AC_SUBST(RTEMS_HAS_MULTIPROCESSING)dnl +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_POSIX, +[ +AC_ARG_ENABLE(posix, +[ --enable-posix enable posix interface], +[case "${enableval}" in + yes) RTEMS_HAS_POSIX_API=yes ;; + no) RTEMS_HAS_POSIX_API=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-posix option) ;; +esac],[RTEMS_HAS_POSIX_API=yes]) +AC_SUBST(RTEMS_HAS_POSIX_API) + +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_HAS_POSIX_API=no + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + no_cpu-*rtems*) + RTEMS_HAS_POSIX_API=no + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + *) + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_HAS_POSIX_API) +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_NETWORKING, +[ +AC_ARG_ENABLE(networking, +[ --enable-networking enable TCP/IP stack], +[case "${enableval}" in + yes) RTEMS_HAS_NETWORKING=yes ;; + no) RTEMS_HAS_NETWORKING=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-networking option) ;; +esac],[RTEMS_HAS_NETWORKING=yes]) +AC_SUBST(RTEMS_HAS_NETWORKING)dnl +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_RDBG, +[ +AC_ARG_ENABLE(rdbg, +[ --enable-rdbg enable remote debugger], +[case "${enableval}" in + yes) RTEMS_HAS_RDBG=yes ;; + no) RTEMS_HAS_RDBG=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-rdbg option) ;; +esac],[RTEMS_HAS_RDBG=no]) +AC_SUBST(RTEMS_HAS_RDBG)dnl +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_INLINES, +[AC_ARG_ENABLE(rtems-inlines, +[ --enable-rtems-inlines enable RTEMS inline functions] +[ (default:enabled, disable to use macros)], +[case "${enableval}" in + yes) RTEMS_USE_MACROS=no ;; + no) RTEMS_USE_MACROS=yes ;; + *) AC_MSG_ERROR(bad value ${enableval} for disable-rtems-inlines option) ;; +esac],[RTEMS_USE_MACROS=no]) +AC_SUBST(RTEMS_USE_MACROS)dnl +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_CXX, +[ +AC_ARG_ENABLE(cxx, +[ --enable-cxx enable C++ support,] +[ and build the rtems++ library], +[case "${enableval}" in + yes) RTEMS_HAS_CPLUSPLUS=yes ;; + no) RTEMS_HAS_CPLUSPLUS=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for enable-cxx option) ;; +esac], [RTEMS_HAS_CPLUSPLUS=no]) +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_GCC28, +[ +AC_ARG_ENABLE(gcc28, +[ --enable-gcc28 enable use of gcc 2.8.x features], +[case "${enableval}" in + yes) RTEMS_USE_GCC272=no ;; + no) RTEMS_USE_GCC272=yes ;; + *) AC_MSG_ERROR(bad value ${enableval} for gcc-28 option) ;; +esac],[RTEMS_USE_GCC272=no]) +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_ENABLE_LIBCDIR, +[ +AC_ARG_ENABLE(libcdir, +[ --enable-libcdir=directory set the directory for the C library], +[ RTEMS_LIBC_DIR="${enableval}" ; \ +test -d ${enableval} || AC_MSG_ERROR("$enableval is not a directory" ) ] ) +AC_SUBST(RTEMS_LIBC_DIR)dnl +]) + +AC_DEFUN(RTEMS_ENABLE_BARE, +[ +AC_ARG_ENABLE(bare-cpu-cflags, +[ --enable-bare-cpu-cflags specify a particular cpu cflag] +[ (bare bsp specific)], +[case "${enableval}" in + no) BARE_CPU_CFLAGS="" ;; + *) BARE_CPU_CFLAGS="${enableval}" ;; +esac], +[BARE_CPU_CFLAGS=""]) + +AC_ARG_ENABLE(bare-cpu-model, +[ --enable-bare-cpu-model specify a particular cpu model] +[ (bare bsp specific)], +[case "${enableval}" in + no) BARE_CPU_MODEL="" ;; + *) BARE_CPU_MODEL="${enableval}" ;; +esac], +[BARE_CPU_MODEL=""]) +]) + + +dnl $Id$ + +dnl Override the set of BSPs to be built. +dnl used by the toplevel configure script +dnl RTEMS_ENABLE_RTEMSBSP(rtems_bsp_list) +AC_DEFUN(RTEMS_ENABLE_RTEMSBSP, +[ +AC_ARG_ENABLE(rtemsbsp, +[ --enable-rtemsbsp=bsp1 bsp2 .. BSPs to include in build], +[case "${enableval}" in + yes|no) AC_MSG_ERROR([missing argument to --enable-rtemsbsp=\"bsp1 bsp2\"]);; + *) $1=$enableval;; +esac],[$1=""]) +]) + +dnl Pass a single BSP via an environment variable +dnl used by per BSP configure scripts +AC_DEFUN(RTEMS_ENV_RTEMSBSP, +[dnl +AC_MSG_CHECKING([for RTEMS_BSP]) +AC_CACHE_VAL(rtems_cv_RTEMS_BSP, +[dnl + test -n "${RTEMS_BSP}" && rtems_cv_RTEMS_BSP="$RTEMS_BSP"; +])dnl +if test -z "$rtems_cv_RTEMS_BSP"; then + AC_MSG_ERROR([Missing RTEMS_BSP]) +fi +RTEMS_BSP="$rtems_cv_RTEMS_BSP" +AC_MSG_RESULT(${RTEMS_BSP}) +AC_SUBST(RTEMS_BSP) +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_PATH_PERL, +[ +AC_PATH_PROG(PERL,perl) +if test -z "$PERL" ; then +AC_MSG_WARN( +[***] +[ perl was not found] +[ Note: Some tools will not be built.]) +fi +]) + +dnl $Id$ + +AC_DEFUN(RTEMS_PATH_KSH, +[ +dnl NOTE: prefer bash over ksh over sh +AC_PATH_PROGS(KSH,bash ksh sh) +if test -z "$KSH"; then +dnl NOTE: This cannot happen -- /bin/sh must always exist +AC_MSG_ERROR( +[***] +[ Cannot determine a usable shell bash/ksh/sh] +[ Please contact your system administrator] ); +fi +]) + +dnl $Id$ + +dnl check if RTEMS support a cpu +AC_DEFUN(RTEMS_CHECK_CPU, +[dnl +AC_REQUIRE([RTEMS_TOP]) +AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU]) +# Is this a supported CPU? +AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported]) +if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR(no) +fi +])dnl + + +dnl $Id$ + +AC_DEFUN(RTEMS_CANONICAL_HOST, +[dnl +AC_REQUIRE([AC_CANONICAL_HOST]) +RTEMS_HOST=$host_os +changequote(,)dnl +case "${target}" in + # hpux unix port should go here + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_HOST=Linux + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_HOST=FreeBSD + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_HOST=Solaris + ;; + *) + ;; +esac +changequote([,])dnl +AC_SUBST(RTEMS_HOST) +])dnl + +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +dnl +dnl $Id$ +dnl +dnl Check for target gcc +dnl +dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl Completely reworked + +AC_DEFUN(RTEMS_PROG_CC, +[ +AC_BEFORE([$0], [AC_PROG_CPP])dnl +AC_BEFORE([$0], [AC_PROG_CC])dnl +AC_REQUIRE([RTEMS_TOOL_PREFIX])dnl + +dnl Only accept gcc and cc +dnl NOTE: This might be too restrictive for native compilation +AC_PATH_PROGS(CC_FOR_TARGET, "$program_prefix"gcc "$program_prefix"cc ) +test -z "$CC_FOR_TARGET" \ + && AC_MSG_ERROR([no acceptable cc found in \$PATH]) + +dnl backup +rtems_save_CC=$CC +rtems_save_CFLAGS=$CFLAGS + +dnl temporarily set CC +CC=$CC_FOR_TARGET + +AC_PROG_CC_WORKS +AC_PROG_CC_GNU + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +dnl Check whether -g works, even if CFLAGS is set, in case the package +dnl plays around with CFLAGS (such as to build both debugging and +dnl normal versions of a library), tasteless as that idea is. + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + AC_PROG_CC_G + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + +rtems_cv_prog_gcc=$ac_cv_prog_gcc +rtems_cv_prog_cc_g=$ac_cv_prog_cc_g +rtems_cv_prog_cc_works=$ac_cv_prog_cc_works +rtems_cv_prog_cc_cross=$ac_cv_prog_cc_cross + +dnl restore initial values +CC=$rtems_save_CC +CFLAGS=$rtems_save_CFLAGS + +unset ac_cv_prog_gcc +unset ac_cv_prog_cc_g +unset ac_cv_prog_cc_works +unset ac_cv_prog_cc_cross +]) + +AC_DEFUN(RTEMS_PROG_CC_FOR_TARGET, +[ +dnl check target cc +RTEMS_PROG_CC +dnl check if the compiler supports --specs +RTEMS_GCC_SPECS +dnl check if the target compiler may use --pipe +RTEMS_GCC_PIPE +dnl check if the compiler supports --specs if gcc28 is requested +if test "$RTEMS_USE_GCC272" != "yes" ; then + if test "$rtems_cv_gcc_specs" = "no"; then + AC_MSG_WARN([*** disabling --enable-gcc28]) + RTEMS_USE_GCC272=yes + fi +fi +test "$rtems_cv_gcc_pipe" = "yes" && CC_FOR_TARGET="$CC_FOR_TARGET --pipe" + +dnl FIXME: HACK for egcs/cygwin mixing '\\' and '/' in gcc -print-* +case $host_os in +*cygwin*) GCCSED="| sed 's%\\\\%/%g'" ;; +*) ;; +esac +AC_SUBST(GCCSED) +]) + +dnl +dnl $Id$ +dnl +dnl Set program_prefix +dnl +dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl Extracted from configure + +AC_DEFUN(RTEMS_TOOL_PREFIX, +[AC_REQUIRE([AC_CANONICAL_TARGET])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl + +changequote(,)dnl +if [ "${program_prefix}" = "NONE" ] ; then + if [ "${target}" = "${host}" ] ; then + program_prefix= + else + program_prefix=${target}- + fi +fi +changequote([,])dnl +]) + +dnl +dnl $Id$ +dnl +dnl Check whether the target compiler accepts -specs +dnl +dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de +dnl + +AC_DEFUN(RTEMS_GCC_SPECS, +[AC_REQUIRE([RTEMS_PROG_CC]) +AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts -specs,rtems_cv_gcc_specs, +[ +rtems_cv_gcc_specs=no +if test "$rtems_cv_prog_gcc" = "yes"; then + touch confspec + echo 'void f(){}' >conftest.c + if test -z "`${CC_FOR_TARGET} -specs confspec -c conftest.c 2>&1`";then + rtems_cv_gcc_specs=yes + fi +fi +rm -f confspec conftest* +])]) + +dnl +dnl $Id$ +dnl +dnl Check whether the target compiler accepts -pipe +dnl +dnl 98/02/11 Ralf Corsepius corsepiu@faw.uni-ulm.de +dnl + +AC_DEFUN(RTEMS_GCC_PIPE, +[AC_REQUIRE([RTEMS_PROG_CC]) +AC_REQUIRE([AC_CANONICAL_HOST]) +AC_CACHE_CHECK(whether $CC_FOR_TARGET accepts --pipe,rtems_cv_gcc_pipe, +[ +rtems_cv_gcc_pipe=no +if test "$rtems_cv_prog_gcc" = "yes"; then +case "$host_os" in + cygwin*) + ;; + *) + echo 'void f(){}' >conftest.c + if test -z "`${CC_FOR_TARGET} --pipe -c conftest.c 2>&1`";then + rtems_cv_gcc_pipe=yes + fi + rm -f conftest* + ;; +esac +fi +]) +]) + +dnl +dnl $Id$ +dnl +dnl Check for target g++ +dnl +dnl 98/05/20 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl Completely reworked + +AC_DEFUN(RTEMS_PROG_CXX, +[ +AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl +AC_BEFORE([$0], [AC_PROG_CXX])dnl +AC_REQUIRE([RTEMS_TOOL_PREFIX])dnl + +dnl Only accept g++ and c++ +dnl NOTE: This might be too restrictive for native compilation +AC_PATH_PROGS(CXX_FOR_TARGET, "$program_prefix"g++ "$program_prefix"c++) +test -z "$CXX_FOR_TARGET" \ + && AC_MSG_ERROR([no acceptable c++ found in \$PATH]) + +dnl backup +rtems_save_CXX=$CXX +rtems_save_CXXFLAGS=$CXXFLAGS + +dnl temporarily set CXX +CXX=$CXX_FOR_TARGET + +AC_PROG_CXX_WORKS +AC_PROG_CXX_GNU + +if test $ac_cv_prog_gxx = yes; then + GXX=yes +dnl Check whether -g works, even if CXXFLAGS is set, in case the package +dnl plays around with CXXFLAGS (such as to build both debugging and +dnl normal versions of a library), tasteless as that idea is. + ac_test_CXXFLAGS="${CXXFLAGS+set}" + ac_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS= + AC_PROG_CXX_G + if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS="$ac_save_CXXFLAGS" + elif test $ac_cv_prog_cxx_g = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-O2" + fi +else + GXX= + test "${CXXFLAGS+set}" = set || CXXFLAGS="-g" +fi + +rtems_cv_prog_gxx=$ac_cv_prog_gxx +rtems_cv_prog_cxx_g=$ac_cv_prog_cxx_g +rtems_cv_prog_cxx_works=$ac_cv_prog_cxx_works +rtems_cv_prog_cxx_cross=$ac_cv_prog_cxx_cross + +CXX=$rtems_save_CXX +CXXFLAGS=$rtems_save_CXXFLAGS + +dnl restore initial values +unset ac_cv_prog_gxx +unset ac_cv_prog_cc_g +unset ac_cv_prog_cxx_works +unset ac_cv_prog_cxx_cross +]) + +AC_DEFUN(RTEMS_PROG_CXX_FOR_TARGET, +[ + RTEMS_PROG_CXX + if test "$rtems_cv_prog_cc_cross" != "$rtems_cv_prog_cxx_cross"; then + AC_MSG_ERROR([***] + [Inconsistency in compiler configuration:] + [Target C compiler and Target C++ compiler] + [must both either be cross compilers or native compilers] + [Hint: If building a posix bsp: LD_LIBRARY_PATH?] ) + fi +]) + +dnl +dnl $Id$ +dnl +dnl Set target tools +dnl +dnl 98/06/23 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl fixing cache/environment variable handling +dnl adding checks for cygwin/egcs '\\'-bug +dnl adding checks for ranlib/ar -s problem +dnl +dnl 98/02/12 Ralf Corsepius (corsepiu@faw.uni-ulm.de) +dnl + +AC_DEFUN(RTEMS_GCC_PRINT, +[ case $host_os in + *cygwin*) + dnl FIXME: Hack for cygwin/egcs reporting mixed '\\' and '/' + dnl Should be removed once cygwin/egcs reports '/' only + $1=`$CC_FOR_TARGET --print-prog-name=$2 | sed -e 's%\\\\%/%g' ` + ;; + *) + $1=`$CC_FOR_TARGET --print-prog-name=$2` + ;; + esac +]) + +AC_DEFUN(RTEMS_PATH_TOOL, +[ +AC_MSG_CHECKING([target's $2]) +AC_CACHE_VAL(ac_cv_path_$1,:) +AC_MSG_RESULT([$ac_cv_path_$1]) + +if test -n "$ac_cv_path_$1"; then + dnl retrieve the value from the cache + $1=$ac_cv_path_$1 +else + dnl the cache was not set + if test -z "[$]$1" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + RTEMS_GCC_PRINT($1,$2) + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + AC_MSG_CHECKING([whether environment variable $1 is an absolute path]) + case "[$]$1" in + /*) # valid + AC_MSG_RESULT("yes") + ;; + *) # invalid for AC_PATH_PROG + AC_MSG_RESULT("no") + AC_MSG_ERROR([***] + [Environment variable $1 should either] + [be unset (preferred) or contain an absolute path]) + ;; + esac + fi + + AC_PATH_PROG($1,"$program_prefix"$2,$3) +fi +]) + +AC_DEFUN(RTEMS_CANONICALIZE_TOOLS, +[AC_REQUIRE([RTEMS_PROG_CC])dnl + +dnl FIXME: What shall be done if these tools are not available? + RTEMS_PATH_TOOL(AR_FOR_TARGET,ar,no) + RTEMS_PATH_TOOL(AS_FOR_TARGET,as,no) + RTEMS_PATH_TOOL(LD_FOR_TARGET,ld,no) + RTEMS_PATH_TOOL(NM_FOR_TARGET,nm,no) + +dnl special treatment of ranlib + RTEMS_PATH_TOOL(RANLIB_FOR_TARGET,ranlib,no) + if test "$RANLIB_FOR_TARGET" = "no"; then + # ranlib wasn't found; check if ar -s is available + RTEMS_AR_FOR_TARGET_S + if test $rtems_cv_AR_FOR_TARGET_S = "yes" ; then + dnl override RANLIB_FOR_TARGET's cache + ac_cv_path_RANLIB_FOR_TARGET="$AR_FOR_TARGET -s" + RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET + else + AC_MSG_ERROR([***] + [Can't figure out how to build a library index] + [Neither ranlib nor ar -s seem to be available] ) + fi + fi + +dnl NOTE: These may not be available if not using gnutools + RTEMS_PATH_TOOL(OBJCOPY_FOR_TARGET,objcopy,no) + RTEMS_PATH_TOOL(SIZE_FOR_TARGET,size,no) + RTEMS_PATH_TOOL(STRIP_FOR_TARGET,strip,no) +]) + +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_AR_FOR_TARGET_S, +[ +AC_CACHE_CHECK(whether $AR_FOR_TARGET -s works, +rtems_cv_AR_FOR_TARGET_S, +[ +cat > conftest.$ac_ext < conftest.s << EOF + .code16 + data32 + addr32 + lgdt 0 +EOF + if AC_TRY_COMMAND($AS_FOR_TARGET -o conftest.o conftest.s); then + rtems_cv_prog_gas_code16=yes + else + rtems_cv_prog_gas_code16=no + fi]) + RTEMS_GAS_CODE16="$rtems_cv_prog_gas_code16" + fi + AC_SUBST(RTEMS_GAS_CODE16) +]) + + +dnl $Id$ + +dnl Report all available bsps for a target, +dnl check if a bsp-subdirectory is present for all bsps found +dnl +dnl RTEMS_CHECK_BSPS(bsp_list) +AC_DEFUN(RTEMS_CHECK_BSPS, +[ +AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target +AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir +AC_MSG_CHECKING([for bsps]) +case "${target}" in +changequote(,)dnl + i[3456]86-go32-rtems*) +changequote([,])dnl + $1="go32 go32_p5" + ;; + *) + files=`ls $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU` + for file in $files; do + case $file in + shared*);; + Makefile*);; + READ*);; + CVS*);; + pxfl*);; + go32*);; # so the i386 port can pick up the other Makefiles + # Now account for BSPs with build variants + gen68360) rtems_bsp="$rtems_bsp gen68360 gen68360_040";; + p4000) rtems_bsp="$rtems_bsp p4600 p4650";; + mvme162) rtems_bsp="$rtems_bsp mvme162 mvme162lx";; + *) $1="[$]$1 $file";; + esac; + done + ;; +esac +AC_MSG_RESULT([[$]$1 .. done]) +])dnl + +AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP, +[dnl +AC_MSG_CHECKING([for make/custom/[$]$1.cfg]) +if test -r "$srcdir/$RTEMS_TOPdir/make/custom/[$]$1.cfg"; then + AC_MSG_RESULT([yes]) +else + AC_MSG_ERROR([no]) +fi +])dnl + +AC_DEFUN(RTEMS_CHECK_RDBG, +[dnl +AC_REQUIRE([RTEMS_TOP])dnl +AC_REQUIRE([RTEMS_CHECK_CPU])dnl +AC_CACHE_CHECK([whether cpu supports librdbg], + rtems_cv_has_rdbg, + [ + if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/librdbg/${RTEMS_CPU}"; then + rtems_cv_has_rdbg="yes" ; + else + rtems_cv_has_rdbg="no"; + fi + ]) +]) + diff --git a/c/src/make/compilers/Makefile.am b/c/src/make/compilers/Makefile.am new file mode 100644 index 0000000000..91e6c934bb --- /dev/null +++ b/c/src/make/compilers/Makefile.am @@ -0,0 +1,21 @@ +# +# $Id$ +# + +AUTOMAKE_OPTIONS = foreign 1.4 + +rtems_makedir=$(prefix)/make +rtems_make_compilersdir=$(rtems_makedir)/compilers + +# At the moment all actively supported configurations +# use gcc-target-default.cfg only. +rtems_make_compilers_DATA= \ +gcc.cfg \ +gcc-target-default.cfg + +if MAINTAINER_MODE +$(srcdir)/gcc.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/compilers/gcc.cfg.in + cp $< $@ +endif + +include $(top_srcdir)/../../../automake/local.am diff --git a/c/src/make/compilers/Makefile.in b/c/src/make/compilers/Makefile.in new file mode 100644 index 0000000000..e802f333c9 --- /dev/null +++ b/c/src/make/compilers/Makefile.in @@ -0,0 +1,293 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# +# $Id$ +# + + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = .. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@ +BARE_CPU_MODEL = @BARE_CPU_MODEL@ +CAT = @CAT@ +CC = @CC@ +CC_CFLAGS_DEBUG_V = @CC_CFLAGS_DEBUG_V@ +CC_CFLAGS_DEFAULT = @CC_CFLAGS_DEFAULT@ +CC_CFLAGS_PROFILE_V = @CC_CFLAGS_PROFILE_V@ +CC_FOR_TARGET = @CC_FOR_TARGET@ +CC_LDFLAGS_PROFILE_V = @CC_LDFLAGS_PROFILE_V@ +CHMOD = @CHMOD@ +CMP = @CMP@ +CP = @CP@ +CPP = @CPP@ +CUSTOM_CFG_FILES = @CUSTOM_CFG_FILES@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXX_FOR_TARGET = @CXX_FOR_TARGET@ +GCCSED = @GCCSED@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +KSH = @KSH@ +LN = @LN@ +LN_S = @LN_S@ +M4 = @M4@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MV = @MV@ +PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ +PERL = @PERL@ +PROJECT_ROOT = @PROJECT_ROOT@ +RM = @RM@ +RTEMS_BSP = @RTEMS_BSP@ +RTEMS_CPU = @RTEMS_CPU@ +RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ +RTEMS_HAS_CPLUSPLUS = @RTEMS_HAS_CPLUSPLUS@ +RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@ +RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@ +RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@ +RTEMS_HAS_RDBG = @RTEMS_HAS_RDBG@ +RTEMS_HOST = @RTEMS_HOST@ +RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@ +RTEMS_ROOT = @RTEMS_ROOT@ +RTEMS_TOPdir = @RTEMS_TOPdir@ +RTEMS_USE_GCC272 = @RTEMS_USE_GCC272@ +RTEMS_USE_MACROS = @RTEMS_USE_MACROS@ +SED = @SED@ +SORT = @SORT@ +TOUCH = @TOUCH@ +VERSION = @VERSION@ +program_prefix = @program_prefix@ +rtems_cv_prog_cc_cross = @rtems_cv_prog_cc_cross@ + +AUTOMAKE_OPTIONS = foreign 1.4 + +rtems_makedir = $(prefix)/make +rtems_make_compilersdir = $(rtems_makedir)/compilers + +# At the moment all actively supported configurations +# use gcc-target-default.cfg only. +rtems_make_compilers_DATA = gcc.cfg gcc-target-default.cfg + +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs +CONFIG_CLEAN_FILES = gcc.cfg +DATA = $(rtems_make_compilers_DATA) + +DIST_COMMON = Makefile.am Makefile.in gcc.cfg.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../automake/local.am + cd $(top_srcdir) && $(AUTOMAKE) --foreign compilers/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + +gcc.cfg: $(top_builddir)/config.status gcc.cfg.in + cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + +install-rtems_make_compilersDATA: $(rtems_make_compilers_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(rtems_make_compilersdir) + @list='$(rtems_make_compilers_DATA)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_make_compilersdir)/$$p"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_make_compilersdir)/$$p; \ + else if test -f $$p; then \ + echo " $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_make_compilersdir)/$$p"; \ + $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_make_compilersdir)/$$p; \ + fi; fi; \ + done + +uninstall-rtems_make_compilersDATA: + @$(NORMAL_UNINSTALL) + list='$(rtems_make_compilers_DATA)'; for p in $$list; do \ + rm -f $(DESTDIR)$(rtems_make_compilersdir)/$$p; \ + done +tags: TAGS +TAGS: + + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = compilers + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign compilers/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: install-rtems_make_compilersDATA +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-rtems_make_compilersDATA +uninstall: uninstall-am +all-am: Makefile $(DATA) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(rtems_make_compilersdir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-generic clean-am + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: uninstall-rtems_make_compilersDATA \ +install-rtems_make_compilersDATA tags distdir info-am info dvi-am dvi \ +check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +@MAINTAINER_MODE_TRUE@$(srcdir)/gcc.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/compilers/gcc.cfg.in +@MAINTAINER_MODE_TRUE@ cp $< $@ + +debug-am: +debug: debug-am +.PHONY: debug debug-am + +debug_install-am: +debug_install: debug_install-am +.PHONY: debug_install debug_install-am + +profile-am: +profile: profile-am +.PHONY: profile profile-am + +profile_install-am: +profile_install: profile_install-am +.PHONY: profile_install profile_install-am + +preinstall-am: +preinstall: preinstall-am +.PHONY: preinstall preinstall-am + +clobber-am: +clobber: clobber-am +.PHONY: clobber clobber-am + +depend-am: +depend: depend-am +.PHONY: depend depend-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/c/src/make/compilers/gcc.cfg.in b/c/src/make/compilers/gcc.cfg.in new file mode 100644 index 0000000000..590bacc213 --- /dev/null +++ b/c/src/make/compilers/gcc.cfg.in @@ -0,0 +1,203 @@ +# +# $Id$ +# +# gcc 2.6.x native compiler +# Compiler (and tools) configuration +# + +# Additional target names (other than debug, profile) +TARGET_VARIANTS += + +# +# Pre-processor defines. +# Local tailoring (on the command line) can be done by setting XCPPFLAGS +# which is never set in the Makefile's +# + +CPPFLAGS=$(XCPPFLAGS) $(DEFINES) + +# +# Local tailoring (on the command line) can be done by setting CFLAGS +# which is never set in the Makefile's +# + +# +# CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V, CFLAGS_PROFILE_V are the values we +# would want the corresponding macros to be set to. +# +# CFLAGS_OPTIMIZE, CFLAGS_DEBUG, CFLAGS_PROFILE are set in the leaf +# Makefiles by the 'debug:' and 'profile:' targets to their _V values. +# + +# default flags + +CFLAGS_DEFAULT = @CC_CFLAGS_DEFAULT@ + +# Under MS-DOS do not use pipes +# It turns out the pipes don't work with some non-gas assemblers either. :( +# ifneq ($(RTEMS_HOST),msdos) +# # CFLAGS_DEFAULT += -pipe +# CFLAGS_DEFAULT += +# endif + +# Additional target names (other than debug, profile) + +# optimize flag: typically -0, could use -O4 or -fast +# -O4 is ok for RTEMS +CFLAGS_OPTIMIZE_V=-O + +# debug flag; typically -g +CFLAGS_DEBUG_V=@CC_CFLAGS_DEBUG_V@ + +# when debugging, optimize flag: typically empty +# some compilers do allow optimization with their "-g" +CFLAGS_DEBUG_OPTIMIZE_V= + +# profile flag; use gprof(1) +CFLAGS_PROFILE_V=@CC_CFLAGS_PROFILE_V@ + +# default is to optimize +CFLAGS_OPTIMIZE=$(CFLAGS_OPTIMIZE_V) + +# dynamic libraries +CFLAGS_DYNAMIC_V=-fpic +ASFLAGS_DYNAMIC_V= + +# XCFLAGS are now local flags to avoid conflict with cygnus configure +XCFLAGS=$(CFLAGS_OPTIMIZE) $(CFLAGS_DEBUG) $(CFLAGS_PROFILE) \ + $(CFLAGS_DEFAULT) + +# List of library paths without -L +LD_PATHS= + +# libraries you want EVERYONE to link with +LD_LIBS= + +# ld flag to ensure pure-text +LDFLAGS_MUST_BE_PURE_V = + +# ld flag for [un]shared objects +LDFLAGS_STATIC_LIBRARIES_V = +LDFLAGS_SHARED_LIBRARIES_V = + +# ld flag for incomplete link +LDFLAGS_INCOMPLETE = -r + +# Special linker options when building lib.so +LDFLAGS_DYNAMIC_V = ?? + +# Some dynamic linking systems want the preferred name recorded in the binary +# ref: src/libxil/Makefile +LDFLAGS_DYNAMIC_LIBNAME_V = -h $(DYNAMIC_VERSION_LIBNAME) + +# ld flags for profiling, debugging +LDFLAGS_PROFILE_V = @CC_LDFLAGS_PROFILE_V@ +LDFLAGS_DEBUG_V = + +LDFLAGS=$(LDFLAGS_PROFILE) $(LDFLAGS_DEBUG) $(LD_PATHS:%=-L %) + +# +# Stuff to clean and clobber for the compiler and its tools +# + +CLEAN_CC = a.out *.o *.BAK +CLOBBER_CC = + +# +# Client compiler and support tools +# + +# CC_FOR_BUILD=gcc -O +# override CC=$(CC_FOR_BUILD) + +CC=@CC@ + +# CPP command to write file to standard output +CPP=$(CC) -E + +# flags set by cc when running cpp +CPP_CC_FLAGS=-D__STDC__ + +# egrep regexp to ignore symbol table entries in ar archives. +# Only used to make sure we skip them when coalescing libraries. +# skip __.SYMDEF and empty names (maybe bug in ranlib??). +AR_SYMBOL_TABLE="HIGHLY-UNLIKELY-TO-CONFLICT" +ARFLAGS=ruv + +# +# Command to convert a normal archive to one searchable by $(LD) +# Not needed on SVR4 +# FIXME: Should be handled by autoconf. Doesn't matter, because +# rtems doesn't have any host-libraries until now. +# + +MKLIB=echo library is complete: + +# +# How to compile stuff into ${ARCH} subdirectory +# +# NOTE: we override COMPILE.c +# + +COMPILE.c=$(CC) $(CFLAGS) $(CPPFLAGS) $(XCFLAGS) -c + +${ARCH}/%.o: %.c + ${COMPILE.c} -o $@ $< + +${ARCH}/%.o: %.cc + ${COMPILE.c} -o $@ $< + +# assembly runs gasp +${ARCH}/%.o: %.s + $(CPP) ${CPPFLAGS} $< | $(SED) 's/% /%/g' | $(SED) 's/^#.*//' >$(ARCH)/$*.i + $(AS) -o $@ $(ARCH)/$*.i + $(RM) $(ARCH)/$*.i + +# Link host applications. +define make-exe + ${CC} ${LDFLAGS} -o $@ $^ ${LD_LIBS} +endef + +# Specify our own default rule for this to prevent having CFLAGS and +# CPPFLAGS being passed to linker +# +# NOTE: This rule is only used as fallback for host-tool makefiles +# which don't provide their own rule +${ARCH}/%$(EXEEXT): ${ARCH}/%.o + $(make-exe) + +# create $(ARCH)/pgm from pgm.sh +${ARCH}/%: %.sh + $(RM) $@ + $(CP) $< $@ + $(CHMOD) +x $@ + +# Dependency files for use by gmake +# NOTE: we don't put in $(TARGET_ARCH) +# so that 'make clean' doesn't blow it away + +DEPEND=Depends-$(TARGET_ARCH:o-%=%) + +CLEAN_DEPEND=$(DEPEND).tmp +CLOBBER_DEPEND=$(DEPEND) + +# We deliberately don't have anything depend on the +# $(DEPEND) file; otherwise it will get rebuilt even +# on 'make clean' +# + +depend: $(C_FILES) $(CC_FILES) $(S_FILES) +ifneq ($(words $(C_FILES) $(CC_FILES) $(S_FILES)), 0) +# Use gcc -M to generate dependencies +# Replace foo.o with $(ARCH)/foo.o +# Replace $(ARCH) value with string $(ARCH) +# so that it will for debug and profile cases + $(COMPILE.c) -M $^ | \ + $(SED) -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \ + -e 's?$(ARCH)/?$$(ARCH)/?' >$(DEPEND).tmp + $(MV) $(DEPEND).tmp $(DEPEND) +endif + +define make-rel + $(LD) $(LDFLAGS_INCOMPLETE) $(XLDFLAGS) -o $@ $(OBJS) +endef diff --git a/c/src/make/configure b/c/src/make/configure new file mode 100644 index 0000000000..50532e36d4 --- /dev/null +++ b/c/src/make/configure @@ -0,0 +1,3399 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.13 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help + --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" +ac_help="$ac_help + --enable-multiprocessing enable multiprocessing interface" +ac_help="$ac_help + --enable-posix enable posix interface" +ac_help="$ac_help + --enable-networking enable TCP/IP stack" +ac_help="$ac_help + --enable-rdbg enable remote debugger" +ac_help="$ac_help + --enable-rtems-inlines enable RTEMS inline functions + (default:enabled, disable to use macros)" +ac_help="$ac_help + --enable-cxx enable C++ support, + and build the rtems++ library" +ac_help="$ac_help + --enable-gcc28 enable use of gcc 2.8.x features" +ac_help="$ac_help + --enable-libcdir=directory set the directory for the C library" +ac_help="$ac_help + --enable-bare-cpu-cflags specify a particular cpu cflag + (bare bsp specific)" +ac_help="$ac_help + --enable-bare-cpu-model specify a particular cpu model + (bare bsp specific)" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.13" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=main.cfg.in + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + +# Check whether --with-target-subdir or --without-target-subdir was given. +if test "${with_target_subdir+set}" = set; then + withval="$with_target_subdir" + TARGET_SUBDIR="$withval" +else + TARGET_SUBDIR="." +fi + + +RTEMS_TOPdir="../../.."; + + +echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 +echo "configure:567: checking for RTEMS Version" >&5 +if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then +RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ +sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` +else +{ echo "configure: error: Unable to find ${RTEMS_TOPdir}/VERSION" 1>&2; exit 1; } +fi +if test -z "$RTEMS_VERSION"; then +{ echo "configure: error: Unable to determine version" 1>&2; exit 1; } +fi +echo "$ac_t""$RTEMS_VERSION" 1>&6 + +ac_aux_dir= +for ac_dir in ../../.. $srcdir/../../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in ../../.. $srcdir/../../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:600: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + + +# Do some error checking and defaulting for the host and target type. +# The inputs are: +# configure --host=HOST --target=TARGET --build=BUILD NONOPT +# +# The rules are: +# 1. You are not allowed to specify --host, --target, and nonopt at the +# same time. +# 2. Host defaults to nonopt. +# 3. If nonopt is not specified, then host defaults to the current host, +# as determined by config.guess. +# 4. Target and build default to nonopt. +# 5. If nonopt is not specified, then target and build default to host. + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +case $host---$target---$nonopt in +NONE---*---* | *---NONE---* | *---*---NONE) ;; +*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; +esac + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:655: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 +echo "configure:676: checking target system type" >&5 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:694: checking build system type" >&5 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +test "$host_alias" != "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 +echo "configure:717: checking rtems target cpu" >&5 +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_CPU=i386 + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_CPU=unix + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_CPU=unix + ;; + no_cpu-*rtems*) + RTEMS_CPU=no_cpu + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_CPU=unix + ;; + *) + RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'` + ;; +esac + +echo "$ac_t""$RTEMS_CPU" 1>&6 + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:755: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +echo "configure:808: checking whether build environment is sane" >&5 +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" 1>&2; exit 1; } + fi + + test "$2" = conftestfile + ) +then + # Ok. + : +else + { echo "configure: error: newly created file is older than distributed files! +Check your system clock" 1>&2; exit 1; } +fi +rm -f conftest* +echo "$ac_t""yes" 1>&6 +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. echo might interpret backslashes. + cat <<\EOF_SED > conftestsed +s,\\,\\\\,g; s,\$,$$,g +EOF_SED + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + + +PACKAGE=rtems-c-src-make + +VERSION=$RTEMS_VERSION + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +fi + + + +missing_dir=`cd $ac_aux_dir && pwd` +echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 +echo "configure:877: checking for working aclocal" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal + echo "$ac_t""found" 1>&6 +else + ACLOCAL="$missing_dir/missing aclocal" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +echo "configure:890: checking for working autoconf" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + echo "$ac_t""found" 1>&6 +else + AUTOCONF="$missing_dir/missing autoconf" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working automake""... $ac_c" 1>&6 +echo "configure:903: checking for working automake" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake + echo "$ac_t""found" 1>&6 +else + AUTOMAKE="$missing_dir/missing automake" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +echo "configure:916: checking for working autoheader" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + echo "$ac_t""found" 1>&6 +else + AUTOHEADER="$missing_dir/missing autoheader" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +echo "configure:929: checking for working makeinfo" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + echo "$ac_t""found" 1>&6 +else + MAKEINFO="$missing_dir/missing makeinfo" + echo "$ac_t""missing" 1>&6 +fi + + +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:943: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + + + +# Check whether --enable-multiprocessing or --disable-multiprocessing was given. +if test "${enable_multiprocessing+set}" = set; then + enableval="$enable_multiprocessing" + case "${enableval}" in + yes) RTEMS_HAS_MULTIPROCESSING=yes ;; + no) RTEMS_HAS_MULTIPROCESSING=no ;; + *) { echo "configure: error: bad value ${enableval} for enable-multiprocessing option" 1>&2; exit 1; } ;; +esac +else + RTEMS_HAS_MULTIPROCESSING=no +fi + + + +# Check whether --enable-posix or --disable-posix was given. +if test "${enable_posix+set}" = set; then + enableval="$enable_posix" + case "${enableval}" in + yes) RTEMS_HAS_POSIX_API=yes ;; + no) RTEMS_HAS_POSIX_API=no ;; + *) { echo "configure: error: bad value ${enableval} for enable-posix option" 1>&2; exit 1; } ;; +esac +else + RTEMS_HAS_POSIX_API=yes +fi + + + +case "${target}" in + # hpux unix port should go here + i[3456]86-go32-rtems*) + RTEMS_HAS_POSIX_API=no + ;; + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + no_cpu-*rtems*) + RTEMS_HAS_POSIX_API=no + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_HAS_POSIX_API=no + ;; + *) + ;; +esac + + + +# Check whether --enable-networking or --disable-networking was given. +if test "${enable_networking+set}" = set; then + enableval="$enable_networking" + case "${enableval}" in + yes) RTEMS_HAS_NETWORKING=yes ;; + no) RTEMS_HAS_NETWORKING=no ;; + *) { echo "configure: error: bad value ${enableval} for enable-networking option" 1>&2; exit 1; } ;; +esac +else + RTEMS_HAS_NETWORKING=yes +fi + + + +# Check whether --enable-rdbg or --disable-rdbg was given. +if test "${enable_rdbg+set}" = set; then + enableval="$enable_rdbg" + case "${enableval}" in + yes) RTEMS_HAS_RDBG=yes ;; + no) RTEMS_HAS_RDBG=no ;; + *) { echo "configure: error: bad value ${enableval} for enable-rdbg option" 1>&2; exit 1; } ;; +esac +else + RTEMS_HAS_RDBG=no +fi + + +# Check whether --enable-rtems-inlines or --disable-rtems-inlines was given. +if test "${enable_rtems_inlines+set}" = set; then + enableval="$enable_rtems_inlines" + case "${enableval}" in + yes) RTEMS_USE_MACROS=no ;; + no) RTEMS_USE_MACROS=yes ;; + *) { echo "configure: error: bad value ${enableval} for disable-rtems-inlines option" 1>&2; exit 1; } ;; +esac +else + RTEMS_USE_MACROS=no +fi + + + +# Check whether --enable-cxx or --disable-cxx was given. +if test "${enable_cxx+set}" = set; then + enableval="$enable_cxx" + case "${enableval}" in + yes) RTEMS_HAS_CPLUSPLUS=yes ;; + no) RTEMS_HAS_CPLUSPLUS=no ;; + *) { echo "configure: error: bad value ${enableval} for enable-cxx option" 1>&2; exit 1; } ;; +esac +else + RTEMS_HAS_CPLUSPLUS=no +fi + + + +# Check whether --enable-gcc28 or --disable-gcc28 was given. +if test "${enable_gcc28+set}" = set; then + enableval="$enable_gcc28" + case "${enableval}" in + yes) RTEMS_USE_GCC272=no ;; + no) RTEMS_USE_GCC272=yes ;; + *) { echo "configure: error: bad value ${enableval} for gcc-28 option" 1>&2; exit 1; } ;; +esac +else + RTEMS_USE_GCC272=no +fi + + + +# Check whether --enable-libcdir or --disable-libcdir was given. +if test "${enable_libcdir+set}" = set; then + enableval="$enable_libcdir" + RTEMS_LIBC_DIR="${enableval}" ; \ +test -d ${enableval} || { echo "configure: error: "$enableval is not a directory" " 1>&2; exit 1; } +fi + + + +# Check whether --enable-bare-cpu-cflags or --disable-bare-cpu-cflags was given. +if test "${enable_bare_cpu_cflags+set}" = set; then + enableval="$enable_bare_cpu_cflags" + case "${enableval}" in + no) BARE_CPU_CFLAGS="" ;; + *) BARE_CPU_CFLAGS="${enableval}" ;; +esac +else + BARE_CPU_CFLAGS="" +fi + + +# Check whether --enable-bare-cpu-model or --disable-bare-cpu-model was given. +if test "${enable_bare_cpu_model+set}" = set; then + enableval="$enable_bare_cpu_model" + case "${enableval}" in + no) BARE_CPU_MODEL="" ;; + *) BARE_CPU_MODEL="${enableval}" ;; +esac +else + BARE_CPU_MODEL="" +fi + + + +echo $ac_n "checking for RTEMS_BSP""... $ac_c" 1>&6 +echo "configure:1122: checking for RTEMS_BSP" >&5 +if eval "test \"`echo '$''{'rtems_cv_RTEMS_BSP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + test -n "${RTEMS_BSP}" && rtems_cv_RTEMS_BSP="$RTEMS_BSP"; + +fi +if test -z "$rtems_cv_RTEMS_BSP"; then + { echo "configure: error: Missing RTEMS_BSP" 1>&2; exit 1; } +fi +RTEMS_BSP="$rtems_cv_RTEMS_BSP" +echo "$ac_t""${RTEMS_BSP}" 1>&6 + + + + +# Extract the first word of "cat", so it can be a program name with args. +set dummy cat; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1141: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_CAT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$CAT" in + /*) + ac_cv_path_CAT="$CAT" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_CAT="$CAT" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_CAT="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +CAT="$ac_cv_path_CAT" +if test -n "$CAT"; then + echo "$ac_t""$CAT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "rm", so it can be a program name with args. +set dummy rm; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1176: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_RM'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$RM" in + /*) + ac_cv_path_RM="$RM" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_RM="$RM" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_RM="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +RM="$ac_cv_path_RM" +if test -n "$RM"; then + echo "$ac_t""$RM" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "cp", so it can be a program name with args. +set dummy cp; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1211: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_CP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$CP" in + /*) + ac_cv_path_CP="$CP" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_CP="$CP" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_CP="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +CP="$ac_cv_path_CP" +if test -n "$CP"; then + echo "$ac_t""$CP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "mv", so it can be a program name with args. +set dummy mv; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1246: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_MV'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$MV" in + /*) + ac_cv_path_MV="$MV" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_MV="$MV" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_MV="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +MV="$ac_cv_path_MV" +if test -n "$MV"; then + echo "$ac_t""$MV" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "ln", so it can be a program name with args. +set dummy ln; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1281: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_LN'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$LN" in + /*) + ac_cv_path_LN="$LN" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_LN="$LN" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_LN="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +LN="$ac_cv_path_LN" +if test -n "$LN"; then + echo "$ac_t""$LN" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 +echo "configure:1314: checking whether ln -s works" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftestdata +if ln -s X conftestdata 2>/dev/null +then + rm -f conftestdata + ac_cv_prog_LN_S="ln -s" +else + ac_cv_prog_LN_S=ln +fi +fi +LN_S="$ac_cv_prog_LN_S" +if test "$ac_cv_prog_LN_S" = "ln -s"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "chmod", so it can be a program name with args. +set dummy chmod; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1337: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_CHMOD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$CHMOD" in + /*) + ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_CHMOD="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +CHMOD="$ac_cv_path_CHMOD" +if test -n "$CHMOD"; then + echo "$ac_t""$CHMOD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "sort", so it can be a program name with args. +set dummy sort; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1372: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_SORT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$SORT" in + /*) + ac_cv_path_SORT="$SORT" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_SORT="$SORT" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_SORT="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +SORT="$ac_cv_path_SORT" +if test -n "$SORT"; then + echo "$ac_t""$SORT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:1416: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +# Extract the first word of "perl", so it can be a program name with args. +set dummy perl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1472: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$PERL" in + /*) + ac_cv_path_PERL="$PERL" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_PERL="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +PERL="$ac_cv_path_PERL" +if test -n "$PERL"; then + echo "$ac_t""$PERL" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$PERL" ; then +echo "configure: warning: *** + perl was not found + Note: Some tools will not be built." 1>&2 +fi + + +# Extract the first word of "touch", so it can be a program name with args. +set dummy touch; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1514: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_TOUCH'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$TOUCH" in + /*) + ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_TOUCH="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +TOUCH="$ac_cv_path_TOUCH" +if test -n "$TOUCH"; then + echo "$ac_t""$TOUCH" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +# Extract the first word of "cmp", so it can be a program name with args. +set dummy cmp; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1549: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_CMP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$CMP" in + /*) + ac_cv_path_CMP="$CMP" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_CMP="$CMP" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_CMP="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +CMP="$ac_cv_path_CMP" +if test -n "$CMP"; then + echo "$ac_t""$CMP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +# Extract the first word of "sed", so it can be a program name with args. +set dummy sed; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1585: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_SED'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$SED" in + /*) + ac_cv_path_SED="$SED" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_SED="$SED" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_SED="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +SED="$ac_cv_path_SED" +if test -n "$SED"; then + echo "$ac_t""$SED" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +for ac_prog in gm4 m4 +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1622: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_M4'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$M4" in + /*) + ac_cv_path_M4="$M4" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_M4="$M4" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_M4="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +M4="$ac_cv_path_M4" +if test -n "$M4"; then + echo "$ac_t""$M4" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$M4" && break +done + + + +for ac_prog in bash ksh sh +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1664: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_KSH'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$KSH" in + /*) + ac_cv_path_KSH="$KSH" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_KSH="$KSH" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_KSH="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +KSH="$ac_cv_path_KSH" +if test -n "$KSH"; then + echo "$ac_t""$KSH" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$KSH" && break +done + +if test -z "$KSH"; then +{ echo "configure: error: *** + Cannot determine a usable shell bash/ksh/sh + Please contact your system administrator " 1>&2; exit 1; }; +fi + + + + + +# Is this a supported CPU? +echo $ac_n "checking if cpu $RTEMS_CPU is supported""... $ac_c" 1>&6 +echo "configure:1711: checking if cpu $RTEMS_CPU is supported" >&5 +if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$RTEMS_CPU"; then + echo "$ac_t""yes" 1>&6 +else + { echo "configure: error: no" 1>&2; exit 1; } +fi + + +RTEMS_HOST=$host_os +case "${target}" in + # hpux unix port should go here + i[3456]86-pc-linux*) # unix "simulator" port + RTEMS_HOST=Linux + ;; + i[3456]86-*freebsd2*) # unix "simulator" port + RTEMS_HOST=FreeBSD + ;; + sparc-sun-solaris*) # unix "simulator" port + RTEMS_HOST=Solaris + ;; + *) + ;; +esac + + + + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + + +if [ "${program_prefix}" = "NONE" ] ; then + if [ "${target}" = "${host}" ] ; then + program_prefix= + else + program_prefix=${target}- + fi +fi + + + + +for ac_prog in "$program_prefix"gcc "$program_prefix"cc +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1772: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_CC_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$CC_FOR_TARGET" in + /*) + ac_cv_path_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_CC_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +CC_FOR_TARGET="$ac_cv_path_CC_FOR_TARGET" +if test -n "$CC_FOR_TARGET"; then + echo "$ac_t""$CC_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$CC_FOR_TARGET" && break +done + +test -z "$CC_FOR_TARGET" \ + && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } + +rtems_save_CC=$CC +rtems_save_CFLAGS=$CFLAGS + +CC=$CC_FOR_TARGET + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:1816: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 1827 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:1832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:1858: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:1863: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1887: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + +rtems_cv_prog_gcc=$ac_cv_prog_gcc +rtems_cv_prog_cc_g=$ac_cv_prog_cc_g +rtems_cv_prog_cc_works=$ac_cv_prog_cc_works +rtems_cv_prog_cc_cross=$ac_cv_prog_cc_cross + +CC=$rtems_save_CC +CFLAGS=$rtems_save_CFLAGS + +unset ac_cv_prog_gcc +unset ac_cv_prog_cc_g +unset ac_cv_prog_cc_works +unset ac_cv_prog_cc_cross + + +echo $ac_n "checking whether $CC_FOR_TARGET accepts -specs""... $ac_c" 1>&6 +echo "configure:1929: checking whether $CC_FOR_TARGET accepts -specs" >&5 +if eval "test \"`echo '$''{'rtems_cv_gcc_specs'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + +rtems_cv_gcc_specs=no +if test "$rtems_cv_prog_gcc" = "yes"; then + touch confspec + echo 'void f(){}' >conftest.c + if test -z "`${CC_FOR_TARGET} -specs confspec -c conftest.c 2>&1`";then + rtems_cv_gcc_specs=yes + fi +fi +rm -f confspec conftest* + +fi + +echo "$ac_t""$rtems_cv_gcc_specs" 1>&6 + + +echo $ac_n "checking whether $CC_FOR_TARGET accepts --pipe""... $ac_c" 1>&6 +echo "configure:1950: checking whether $CC_FOR_TARGET accepts --pipe" >&5 +if eval "test \"`echo '$''{'rtems_cv_gcc_pipe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + +rtems_cv_gcc_pipe=no +if test "$rtems_cv_prog_gcc" = "yes"; then +case "$host_os" in + cygwin*) + ;; + *) + echo 'void f(){}' >conftest.c + if test -z "`${CC_FOR_TARGET} --pipe -c conftest.c 2>&1`";then + rtems_cv_gcc_pipe=yes + fi + rm -f conftest* + ;; +esac +fi + +fi + +echo "$ac_t""$rtems_cv_gcc_pipe" 1>&6 + +if test "$RTEMS_USE_GCC272" != "yes" ; then + if test "$rtems_cv_gcc_specs" = "no"; then + echo "configure: warning: *** disabling --enable-gcc28" 1>&2 + RTEMS_USE_GCC272=yes + fi +fi +test "$rtems_cv_gcc_pipe" = "yes" && CC_FOR_TARGET="$CC_FOR_TARGET --pipe" + +case $host_os in +*cygwin*) GCCSED="| sed 's%\\\\%/%g'" ;; +*) ;; +esac + + + +if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then + + + +for ac_prog in "$program_prefix"g++ "$program_prefix"c++ +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1998: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_CXX_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$CXX_FOR_TARGET" in + /*) + ac_cv_path_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_CXX_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + ;; +esac +fi +CXX_FOR_TARGET="$ac_cv_path_CXX_FOR_TARGET" +if test -n "$CXX_FOR_TARGET"; then + echo "$ac_t""$CXX_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$CXX_FOR_TARGET" && break +done + +test -z "$CXX_FOR_TARGET" \ + && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; } + +rtems_save_CXX=$CXX +rtems_save_CXXFLAGS=$CXXFLAGS + +CXX=$CXX_FOR_TARGET + +echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:2042: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 + +ac_ext=C +# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cxx_cross + +cat > conftest.$ac_ext << EOF + +#line 2053 "configure" +#include "confdefs.h" + +int main(){return(0);} +EOF +if { (eval echo configure:2058: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cxx_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cxx_cross=no + else + ac_cv_prog_cxx_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cxx_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 +if test $ac_cv_prog_cxx_works = no; then + { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:2084: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 +cross_compiling=$ac_cv_prog_cxx_cross + +echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 +echo "configure:2089: checking whether we are using GNU C++" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.C <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gxx=yes +else + ac_cv_prog_gxx=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gxx" 1>&6 + +if test $ac_cv_prog_gxx = yes; then + GXX=yes + ac_test_CXXFLAGS="${CXXFLAGS+set}" + ac_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS= + echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 +echo "configure:2113: checking whether ${CXX-g++} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.cc +if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then + ac_cv_prog_cxx_g=yes +else + ac_cv_prog_cxx_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 + if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS="$ac_save_CXXFLAGS" + elif test $ac_cv_prog_cxx_g = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-O2" + fi +else + GXX= + test "${CXXFLAGS+set}" = set || CXXFLAGS="-g" +fi + +rtems_cv_prog_gxx=$ac_cv_prog_gxx +rtems_cv_prog_cxx_g=$ac_cv_prog_cxx_g +rtems_cv_prog_cxx_works=$ac_cv_prog_cxx_works +rtems_cv_prog_cxx_cross=$ac_cv_prog_cxx_cross + +CXX=$rtems_save_CXX +CXXFLAGS=$rtems_save_CXXFLAGS + +unset ac_cv_prog_gxx +unset ac_cv_prog_cc_g +unset ac_cv_prog_cxx_works +unset ac_cv_prog_cxx_cross + + if test "$rtems_cv_prog_cc_cross" != "$rtems_cv_prog_cxx_cross"; then + { echo "configure: error: *** + Inconsistency in compiler configuration: + Target C compiler and Target C++ compiler + must both either be cross compilers or native compilers + Hint: If building a posix bsp: LD_LIBRARY_PATH? " 1>&2; exit 1; } + fi + +fi + + + +echo $ac_n "checking target's ar""... $ac_c" 1>&6 +echo "configure:2166: checking target's ar" >&5 +if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + : +fi + +echo "$ac_t""$ac_cv_path_AR_FOR_TARGET" 1>&6 + +if test -n "$ac_cv_path_AR_FOR_TARGET"; then + AR_FOR_TARGET=$ac_cv_path_AR_FOR_TARGET +else + if test -z "$AR_FOR_TARGET" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + case $host_os in + *cygwin*) + AR_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=ar | sed -e 's%\\\\%/%g' ` + ;; + *) + AR_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=ar` + ;; + esac + + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6 +echo "configure:2199: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5 + case "$AR_FOR_TARGET" in + /*) # valid + echo "$ac_t"""yes"" 1>&6 + ;; + *) # invalid for AC_PATH_PROG + echo "$ac_t"""no"" 1>&6 + { echo "configure: error: *** + Environment variable AR_FOR_TARGET should either + be unset (preferred) or contain an absolute path" 1>&2; exit 1; } + ;; + esac + fi + + # Extract the first word of ""$program_prefix"ar", so it can be a program name with args. +set dummy "$program_prefix"ar; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2216: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$AR_FOR_TARGET" in + /*) + ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_AR_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_AR_FOR_TARGET" && ac_cv_path_AR_FOR_TARGET="no" + ;; +esac +fi +AR_FOR_TARGET="$ac_cv_path_AR_FOR_TARGET" +if test -n "$AR_FOR_TARGET"; then + echo "$ac_t""$AR_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + + +echo $ac_n "checking target's as""... $ac_c" 1>&6 +echo "configure:2253: checking target's as" >&5 +if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + : +fi + +echo "$ac_t""$ac_cv_path_AS_FOR_TARGET" 1>&6 + +if test -n "$ac_cv_path_AS_FOR_TARGET"; then + AS_FOR_TARGET=$ac_cv_path_AS_FOR_TARGET +else + if test -z "$AS_FOR_TARGET" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + case $host_os in + *cygwin*) + AS_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=as | sed -e 's%\\\\%/%g' ` + ;; + *) + AS_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=as` + ;; + esac + + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6 +echo "configure:2286: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5 + case "$AS_FOR_TARGET" in + /*) # valid + echo "$ac_t"""yes"" 1>&6 + ;; + *) # invalid for AC_PATH_PROG + echo "$ac_t"""no"" 1>&6 + { echo "configure: error: *** + Environment variable AS_FOR_TARGET should either + be unset (preferred) or contain an absolute path" 1>&2; exit 1; } + ;; + esac + fi + + # Extract the first word of ""$program_prefix"as", so it can be a program name with args. +set dummy "$program_prefix"as; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2303: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$AS_FOR_TARGET" in + /*) + ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_AS_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_AS_FOR_TARGET" && ac_cv_path_AS_FOR_TARGET="no" + ;; +esac +fi +AS_FOR_TARGET="$ac_cv_path_AS_FOR_TARGET" +if test -n "$AS_FOR_TARGET"; then + echo "$ac_t""$AS_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + + +echo $ac_n "checking target's ld""... $ac_c" 1>&6 +echo "configure:2340: checking target's ld" >&5 +if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + : +fi + +echo "$ac_t""$ac_cv_path_LD_FOR_TARGET" 1>&6 + +if test -n "$ac_cv_path_LD_FOR_TARGET"; then + LD_FOR_TARGET=$ac_cv_path_LD_FOR_TARGET +else + if test -z "$LD_FOR_TARGET" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + case $host_os in + *cygwin*) + LD_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=ld | sed -e 's%\\\\%/%g' ` + ;; + *) + LD_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=ld` + ;; + esac + + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6 +echo "configure:2373: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5 + case "$LD_FOR_TARGET" in + /*) # valid + echo "$ac_t"""yes"" 1>&6 + ;; + *) # invalid for AC_PATH_PROG + echo "$ac_t"""no"" 1>&6 + { echo "configure: error: *** + Environment variable LD_FOR_TARGET should either + be unset (preferred) or contain an absolute path" 1>&2; exit 1; } + ;; + esac + fi + + # Extract the first word of ""$program_prefix"ld", so it can be a program name with args. +set dummy "$program_prefix"ld; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2390: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$LD_FOR_TARGET" in + /*) + ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_LD_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_LD_FOR_TARGET" && ac_cv_path_LD_FOR_TARGET="no" + ;; +esac +fi +LD_FOR_TARGET="$ac_cv_path_LD_FOR_TARGET" +if test -n "$LD_FOR_TARGET"; then + echo "$ac_t""$LD_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + + +echo $ac_n "checking target's nm""... $ac_c" 1>&6 +echo "configure:2427: checking target's nm" >&5 +if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + : +fi + +echo "$ac_t""$ac_cv_path_NM_FOR_TARGET" 1>&6 + +if test -n "$ac_cv_path_NM_FOR_TARGET"; then + NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET +else + if test -z "$NM_FOR_TARGET" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + case $host_os in + *cygwin*) + NM_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=nm | sed -e 's%\\\\%/%g' ` + ;; + *) + NM_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=nm` + ;; + esac + + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6 +echo "configure:2460: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5 + case "$NM_FOR_TARGET" in + /*) # valid + echo "$ac_t"""yes"" 1>&6 + ;; + *) # invalid for AC_PATH_PROG + echo "$ac_t"""no"" 1>&6 + { echo "configure: error: *** + Environment variable NM_FOR_TARGET should either + be unset (preferred) or contain an absolute path" 1>&2; exit 1; } + ;; + esac + fi + + # Extract the first word of ""$program_prefix"nm", so it can be a program name with args. +set dummy "$program_prefix"nm; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2477: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$NM_FOR_TARGET" in + /*) + ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_NM_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_NM_FOR_TARGET" && ac_cv_path_NM_FOR_TARGET="no" + ;; +esac +fi +NM_FOR_TARGET="$ac_cv_path_NM_FOR_TARGET" +if test -n "$NM_FOR_TARGET"; then + echo "$ac_t""$NM_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + + + +echo $ac_n "checking target's ranlib""... $ac_c" 1>&6 +echo "configure:2515: checking target's ranlib" >&5 +if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + : +fi + +echo "$ac_t""$ac_cv_path_RANLIB_FOR_TARGET" 1>&6 + +if test -n "$ac_cv_path_RANLIB_FOR_TARGET"; then + RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET +else + if test -z "$RANLIB_FOR_TARGET" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + case $host_os in + *cygwin*) + RANLIB_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=ranlib | sed -e 's%\\\\%/%g' ` + ;; + *) + RANLIB_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=ranlib` + ;; + esac + + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6 +echo "configure:2548: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5 + case "$RANLIB_FOR_TARGET" in + /*) # valid + echo "$ac_t"""yes"" 1>&6 + ;; + *) # invalid for AC_PATH_PROG + echo "$ac_t"""no"" 1>&6 + { echo "configure: error: *** + Environment variable RANLIB_FOR_TARGET should either + be unset (preferred) or contain an absolute path" 1>&2; exit 1; } + ;; + esac + fi + + # Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args. +set dummy "$program_prefix"ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2565: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$RANLIB_FOR_TARGET" in + /*) + ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_RANLIB_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_RANLIB_FOR_TARGET" && ac_cv_path_RANLIB_FOR_TARGET="no" + ;; +esac +fi +RANLIB_FOR_TARGET="$ac_cv_path_RANLIB_FOR_TARGET" +if test -n "$RANLIB_FOR_TARGET"; then + echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + + if test "$RANLIB_FOR_TARGET" = "no"; then + # ranlib wasn't found; check if ar -s is available + +echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6 +echo "configure:2604: checking whether $AR_FOR_TARGET -s works" >&5 +if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + +cat > conftest.$ac_ext <&5; (eval $ac_try) 2>&5; }; } \ + && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2614: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \ + && test -s conftest.a ; \ +then + rtems_cv_AR_FOR_TARGET_S="yes" +else + rtems_cv_AR_FOR_TARGET_S="no" +fi + rm -f conftest* + +fi + +echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6 + + if test $rtems_cv_AR_FOR_TARGET_S = "yes" ; then + ac_cv_path_RANLIB_FOR_TARGET="$AR_FOR_TARGET -s" + RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET + else + { echo "configure: error: *** + Can't figure out how to build a library index + Neither ranlib nor ar -s seem to be available " 1>&2; exit 1; } + fi + fi + + +echo $ac_n "checking target's objcopy""... $ac_c" 1>&6 +echo "configure:2639: checking target's objcopy" >&5 +if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + : +fi + +echo "$ac_t""$ac_cv_path_OBJCOPY_FOR_TARGET" 1>&6 + +if test -n "$ac_cv_path_OBJCOPY_FOR_TARGET"; then + OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET +else + if test -z "$OBJCOPY_FOR_TARGET" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + case $host_os in + *cygwin*) + OBJCOPY_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=objcopy | sed -e 's%\\\\%/%g' ` + ;; + *) + OBJCOPY_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=objcopy` + ;; + esac + + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6 +echo "configure:2672: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5 + case "$OBJCOPY_FOR_TARGET" in + /*) # valid + echo "$ac_t"""yes"" 1>&6 + ;; + *) # invalid for AC_PATH_PROG + echo "$ac_t"""no"" 1>&6 + { echo "configure: error: *** + Environment variable OBJCOPY_FOR_TARGET should either + be unset (preferred) or contain an absolute path" 1>&2; exit 1; } + ;; + esac + fi + + # Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args. +set dummy "$program_prefix"objcopy; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2689: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$OBJCOPY_FOR_TARGET" in + /*) + ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_OBJCOPY_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" && ac_cv_path_OBJCOPY_FOR_TARGET="no" + ;; +esac +fi +OBJCOPY_FOR_TARGET="$ac_cv_path_OBJCOPY_FOR_TARGET" +if test -n "$OBJCOPY_FOR_TARGET"; then + echo "$ac_t""$OBJCOPY_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + + +echo $ac_n "checking target's size""... $ac_c" 1>&6 +echo "configure:2726: checking target's size" >&5 +if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + : +fi + +echo "$ac_t""$ac_cv_path_SIZE_FOR_TARGET" 1>&6 + +if test -n "$ac_cv_path_SIZE_FOR_TARGET"; then + SIZE_FOR_TARGET=$ac_cv_path_SIZE_FOR_TARGET +else + if test -z "$SIZE_FOR_TARGET" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + case $host_os in + *cygwin*) + SIZE_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=size | sed -e 's%\\\\%/%g' ` + ;; + *) + SIZE_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=size` + ;; + esac + + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6 +echo "configure:2759: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5 + case "$SIZE_FOR_TARGET" in + /*) # valid + echo "$ac_t"""yes"" 1>&6 + ;; + *) # invalid for AC_PATH_PROG + echo "$ac_t"""no"" 1>&6 + { echo "configure: error: *** + Environment variable SIZE_FOR_TARGET should either + be unset (preferred) or contain an absolute path" 1>&2; exit 1; } + ;; + esac + fi + + # Extract the first word of ""$program_prefix"size", so it can be a program name with args. +set dummy "$program_prefix"size; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2776: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$SIZE_FOR_TARGET" in + /*) + ac_cv_path_SIZE_FOR_TARGET="$SIZE_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_SIZE_FOR_TARGET="$SIZE_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_SIZE_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_SIZE_FOR_TARGET" && ac_cv_path_SIZE_FOR_TARGET="no" + ;; +esac +fi +SIZE_FOR_TARGET="$ac_cv_path_SIZE_FOR_TARGET" +if test -n "$SIZE_FOR_TARGET"; then + echo "$ac_t""$SIZE_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + + +echo $ac_n "checking target's strip""... $ac_c" 1>&6 +echo "configure:2813: checking target's strip" >&5 +if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + : +fi + +echo "$ac_t""$ac_cv_path_STRIP_FOR_TARGET" 1>&6 + +if test -n "$ac_cv_path_STRIP_FOR_TARGET"; then + STRIP_FOR_TARGET=$ac_cv_path_STRIP_FOR_TARGET +else + if test -z "$STRIP_FOR_TARGET" ; then + if test "$rtems_cv_prog_gcc" = "yes"; then + # We are using gcc, ask it about its tool + # NOTE: Necessary if gcc was configured to use the target's + # native tools or uses prefixes for gnutools (e.g. gas instead of as) + case $host_os in + *cygwin*) + STRIP_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=strip | sed -e 's%\\\\%/%g' ` + ;; + *) + STRIP_FOR_TARGET=`$CC_FOR_TARGET --print-prog-name=strip` + ;; + esac + + fi + else + # The user set an environment variable. + # Check whether it is an absolute path, otherwise AC_PATH_PROG + # will override the environment variable, which isn't what the user + # intends + echo $ac_n "checking whether environment variable STRIP_FOR_TARGET is an absolute path""... $ac_c" 1>&6 +echo "configure:2846: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5 + case "$STRIP_FOR_TARGET" in + /*) # valid + echo "$ac_t"""yes"" 1>&6 + ;; + *) # invalid for AC_PATH_PROG + echo "$ac_t"""no"" 1>&6 + { echo "configure: error: *** + Environment variable STRIP_FOR_TARGET should either + be unset (preferred) or contain an absolute path" 1>&2; exit 1; } + ;; + esac + fi + + # Extract the first word of ""$program_prefix"strip", so it can be a program name with args. +set dummy "$program_prefix"strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2863: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$STRIP_FOR_TARGET" in + /*) + ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_STRIP_FOR_TARGET="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_STRIP_FOR_TARGET" && ac_cv_path_STRIP_FOR_TARGET="no" + ;; +esac +fi +STRIP_FOR_TARGET="$ac_cv_path_STRIP_FOR_TARGET" +if test -n "$STRIP_FOR_TARGET"; then + echo "$ac_t""$STRIP_FOR_TARGET" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + + + + if test "${target_cpu}" = "i386"; then + echo $ac_n "checking for 16 bit mode assembler support""... $ac_c" 1>&6 +echo "configure:2902: checking for 16 bit mode assembler support" >&5 +if eval "test \"`echo '$''{'rtems_cv_prog_gas_code16'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.s << EOF + .code16 + data32 + addr32 + lgdt 0 +EOF + if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2912: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then + rtems_cv_prog_gas_code16=yes + else + rtems_cv_prog_gas_code16=no + fi +fi + +echo "$ac_t""$rtems_cv_prog_gas_code16" 1>&6 + RTEMS_GAS_CODE16="$rtems_cv_prog_gas_code16" + fi + + + + +echo $ac_n "checking for make/custom/$RTEMS_BSP.cfg""... $ac_c" 1>&6 +echo "configure:2927: checking for make/custom/$RTEMS_BSP.cfg" >&5 +if test -r "$srcdir/$RTEMS_TOPdir/make/custom/$RTEMS_BSP.cfg"; then + echo "$ac_t""yes" 1>&6 +else + { echo "configure: error: no" 1>&2; exit 1; } +fi + + +if test "$RTEMS_HAS_RDBG" = "yes"; then + echo $ac_n "checking whether cpu supports librdbg""... $ac_c" 1>&6 +echo "configure:2937: checking whether cpu supports librdbg" >&5 +if eval "test \"`echo '$''{'rtems_cv_has_rdbg'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + + if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/librdbg/${RTEMS_CPU}"; then + rtems_cv_has_rdbg="yes" ; + else + rtems_cv_has_rdbg="no"; + fi + +fi + +echo "$ac_t""$rtems_cv_has_rdbg" 1>&6 + + RTEMS_HAS_RDBG="$rtems_cv_has_rdbg"; +fi + + + + + + + + + + + + + +# Collect the files needed to build a BSP +cfg_dir="${RTEMS_TOPdir}/make" +cfg_srcs="" +cfg_dsts="" +CUSTOM_CFG_FILES="" +f="${RTEMS_BSP}.cfg" +while test -n "$f"; do + if test -r "${srcdir}/${cfg_dir}/custom/$f"; then + cfg_srcs="$cfg_srcs ${cfg_dir}/custom/$f" + cfg_dsts="$cfg_dsts custom/$f" + CUSTOM_CFG_FILES="$CUSTOM_CFG_FILES $f" + f=`grep "^include.*make/custom" ${srcdir}/${cfg_dir}/custom/$f \ + | sed \ + -e 's%^.*custom\/%%' \ + -e s%\$\(RTEMS_HOST\)%${RTEMS_HOST}% \ + -e 's%default\.cfg%%'`; + else break; fi; +done + + +# Symlink the *.cfg files from the toplevel make directory into the build +# trees c//make subdirectories + + + + + + + + + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.13" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile +Makefile.inc +main.cfg +host.cfg +target.cfg +Templates/Makefile +custom/Makefile +custom/default.cfg +compilers/Makefile +compilers/gcc.cfg +" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g +s%@SET_MAKE@%$SET_MAKE%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@target@%$target%g +s%@target_alias@%$target_alias%g +s%@target_cpu@%$target_cpu%g +s%@target_vendor@%$target_vendor%g +s%@target_os@%$target_os%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@RTEMS_CPU@%$RTEMS_CPU%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@PACKAGE@%$PACKAGE%g +s%@VERSION@%$VERSION%g +s%@ACLOCAL@%$ACLOCAL%g +s%@AUTOCONF@%$AUTOCONF%g +s%@AUTOMAKE@%$AUTOMAKE%g +s%@AUTOHEADER@%$AUTOHEADER%g +s%@MAKEINFO@%$MAKEINFO%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g +s%@RTEMS_HAS_MULTIPROCESSING@%$RTEMS_HAS_MULTIPROCESSING%g +s%@RTEMS_HAS_POSIX_API@%$RTEMS_HAS_POSIX_API%g +s%@RTEMS_HAS_NETWORKING@%$RTEMS_HAS_NETWORKING%g +s%@RTEMS_HAS_RDBG@%$RTEMS_HAS_RDBG%g +s%@RTEMS_USE_MACROS@%$RTEMS_USE_MACROS%g +s%@RTEMS_LIBC_DIR@%$RTEMS_LIBC_DIR%g +s%@RTEMS_BSP@%$RTEMS_BSP%g +s%@CAT@%$CAT%g +s%@RM@%$RM%g +s%@CP@%$CP%g +s%@MV@%$MV%g +s%@LN@%$LN%g +s%@LN_S@%$LN_S%g +s%@CHMOD@%$CHMOD%g +s%@SORT@%$SORT%g +s%@PERL@%$PERL%g +s%@TOUCH@%$TOUCH%g +s%@CMP@%$CMP%g +s%@SED@%$SED%g +s%@M4@%$M4%g +s%@KSH@%$KSH%g +s%@RTEMS_HOST@%$RTEMS_HOST%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g +s%@GCCSED@%$GCCSED%g +s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g +s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g +s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g +s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g +s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g +s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g +s%@OBJCOPY_FOR_TARGET@%$OBJCOPY_FOR_TARGET%g +s%@SIZE_FOR_TARGET@%$SIZE_FOR_TARGET%g +s%@STRIP_FOR_TARGET@%$STRIP_FOR_TARGET%g +s%@RTEMS_GAS_CODE16@%$RTEMS_GAS_CODE16%g +s%@rtems_cv_prog_cc_cross@%$rtems_cv_prog_cc_cross%g +s%@RTEMS_HAS_CPLUSPLUS@%$RTEMS_HAS_CPLUSPLUS%g +s%@RTEMS_USE_GCC272@%$RTEMS_USE_GCC272%g +s%@BARE_CPU_CFLAGS@%$BARE_CPU_CFLAGS%g +s%@BARE_CPU_MODEL@%$BARE_CPU_MODEL%g +s%@program_prefix@%$program_prefix%g +s%@CC_CFLAGS_DEFAULT@%$CC_CFLAGS_DEFAULT%g +s%@CC_CFLAGS_DEBUG_V@%$CC_CFLAGS_DEBUG_V%g +s%@CC_CFLAGS_PROFILE_V@%$CC_CFLAGS_PROFILE_V%g +s%@CC_LDFLAGS_PROFILE_V@%$CC_LDFLAGS_PROFILE_V%g +s%@CUSTOM_CFG_FILES@%$CUSTOM_CFG_FILES%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +srcdir=$ac_given_srcdir +while test -n "$ac_sources"; do + set $ac_dests; ac_dest=$1; shift; ac_dests=$* + set $ac_sources; ac_source=$1; shift; ac_sources=$* + + echo "linking $srcdir/$ac_source to $ac_dest" + + if test ! -r $srcdir/$ac_source; then + { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; } + fi + rm -f $ac_dest + + # Make relative symlinks. + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'` + if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then + # The dest file is in a subdirectory. + test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir" + ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dest_dir_suffix. + ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dest_dir_suffix= ac_dots= + fi + + case "$srcdir" in + [/$]*) ac_rel_source="$srcdir/$ac_source" ;; + *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;; + esac + + # Make a symlink if possible; otherwise try a hard link. + if ln -s $ac_rel_source $ac_dest 2>/dev/null || + ln $srcdir/$ac_source $ac_dest; then : + else + { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } + fi +done +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff --git a/c/src/make/configure.in b/c/src/make/configure.in new file mode 100644 index 0000000000..e89887480e --- /dev/null +++ b/c/src/make/configure.in @@ -0,0 +1,139 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl $Id$ + +dnl +dnl This script configures the configuration files below make/ +dnl + +AC_PREREQ(2.13) +AC_INIT(main.cfg.in) +RTEMS_TOP(../../..) +AC_CONFIG_AUX_DIR(../../..) + +AC_PROG_MAKE_SET +RTEMS_CANONICAL_TARGET_CPU + +AM_INIT_AUTOMAKE(rtems-c-src-make,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE + +RTEMS_ENABLE_MULTIPROCESSING +RTEMS_ENABLE_POSIX +RTEMS_ENABLE_NETWORKING +RTEMS_ENABLE_RDBG +RTEMS_ENABLE_INLINES +RTEMS_ENABLE_CXX +RTEMS_ENABLE_GCC28 +RTEMS_ENABLE_LIBCDIR +RTEMS_ENABLE_BARE +dnl RTEMS_ENABLE_RTEMSBSP + +RTEMS_ENV_RTEMSBSP + +dnl BEGIN configure.host.in + +AC_PATH_PROG(CAT,cat) +AC_PATH_PROG(RM,rm) +AC_PATH_PROG(CP,cp) +AC_PATH_PROG(MV,mv) +AC_PATH_PROG(LN,ln) +AC_PROG_LN_S +AC_PATH_PROG(CHMOD,chmod) +AC_PATH_PROG(SORT,sort) +AC_PROG_INSTALL +RTEMS_PATH_PERL + +AC_PATH_PROG(TOUCH,touch) +AC_PATH_PROG(CMP,cmp) + +AC_PATH_PROG(SED,sed) +AC_PATH_PROGS(M4,gm4 m4) + +RTEMS_PATH_KSH + +dnl BEGIN configure.target.in + +RTEMS_CHECK_CPU +RTEMS_CANONICAL_HOST + +RTEMS_PROJECT_ROOT + +dnl check target cc +RTEMS_PROG_CC_FOR_TARGET + +dnl check for g++ +if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then + RTEMS_PROG_CXX_FOR_TARGET +fi + +RTEMS_CANONICALIZE_TOOLS + +dnl if this is an i386, does gas have good code16 support? +RTEMS_I386_GAS_CODE16 + +dnl RTEMS_CHECK_BSPS(rtems_bsp) + +RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP) + +if test "$RTEMS_HAS_RDBG" = "yes"; then + RTEMS_CHECK_RDBG + RTEMS_HAS_RDBG="$rtems_cv_has_rdbg"; +fi + +dnl END configure.target.in + +AC_SUBST(rtems_cv_prog_cc_cross) +AC_SUBST(RTEMS_HAS_CPLUSPLUS) +AC_SUBST(RTEMS_USE_GCC272) +AC_SUBST(BARE_CPU_CFLAGS) +AC_SUBST(BARE_CPU_MODEL) +AC_SUBST(program_prefix) +AC_SUBST(CC_CFLAGS_DEFAULT) +AC_SUBST(CC_CFLAGS_DEBUG_V) +AC_SUBST(CC_CFLAGS_PROFILE_V) +AC_SUBST(CC_LDFLAGS_PROFILE_V) + +# Collect the files needed to build a BSP +cfg_dir="${RTEMS_TOPdir}/make" +cfg_srcs="" +cfg_dsts="" +CUSTOM_CFG_FILES="" +f="${RTEMS_BSP}.cfg" +while test -n "$f"; do + if test -r "${srcdir}/${cfg_dir}/custom/$f"; then + cfg_srcs="$cfg_srcs ${cfg_dir}/custom/$f" + cfg_dsts="$cfg_dsts custom/$f" + CUSTOM_CFG_FILES="$CUSTOM_CFG_FILES $f" + f=`grep "^include.*make/custom" ${srcdir}/${cfg_dir}/custom/$f \ + | sed \ + -e 's%^.*custom\/%%' \ + -e s%\$\(RTEMS_HOST\)%${RTEMS_HOST}% \ + -e 's%default\.cfg%%'`; + else break; fi; +done +AC_SUBST(CUSTOM_CFG_FILES) + +# Symlink the *.cfg files from the toplevel make directory into the build +# trees c//make subdirectories +AC_LINK_FILES($cfg_srcs,$cfg_dsts) +AC_LINK_FILES($cfg_dir/Templates/Makefile.lib,Templates/Makefile.lib) +AC_LINK_FILES($cfg_dir/Templates/Makefile.leaf,Templates/Makefile.leaf) +AC_LINK_FILES($cfg_dir/Templates/Makefile.dir,Templates/Makefile.dir) +AC_LINK_FILES($cfg_dir/compilers/gcc-target-default.cfg,compilers/gcc-target-default.cfg) +AC_LINK_FILES($cfg_dir/directory.cfg,directory.cfg) +AC_LINK_FILES($cfg_dir/leaf.cfg,leaf.cfg) +AC_LINK_FILES($cfg_dir/lib.cfg,lib.cfg) +AC_LINK_FILES($cfg_dir/README,README) + +AC_OUTPUT( +Makefile +Makefile.inc +main.cfg +host.cfg +target.cfg +Templates/Makefile +custom/Makefile +custom/default.cfg +compilers/Makefile +compilers/gcc.cfg +) diff --git a/c/src/make/custom/Makefile.am b/c/src/make/custom/Makefile.am new file mode 100644 index 0000000000..3313913c03 --- /dev/null +++ b/c/src/make/custom/Makefile.am @@ -0,0 +1,19 @@ +# +# $Id$ +# + +AUTOMAKE_OPTIONS = foreign 1.4 + +rtems_makedir=$(prefix)/make +rtems_make_customdir=$(rtems_makedir)/custom +rtems_make_custom_DATA = @CUSTOM_CFG_FILES@ + +noinst_DATA = \ +default.cfg + +if MAINTAINER_MODE +$(srcdir)/default.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/custom/default.cfg + sed -e 's%\$$(RTEMS_BSP)%\@RTEMS_BSP\@%g' < $< >$@ +endif + +include $(top_srcdir)/../../../automake/local.am diff --git a/c/src/make/custom/Makefile.in b/c/src/make/custom/Makefile.in new file mode 100644 index 0000000000..ce9154d19c --- /dev/null +++ b/c/src/make/custom/Makefile.in @@ -0,0 +1,291 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# +# $Id$ +# + + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = .. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@ +BARE_CPU_MODEL = @BARE_CPU_MODEL@ +CAT = @CAT@ +CC = @CC@ +CC_CFLAGS_DEBUG_V = @CC_CFLAGS_DEBUG_V@ +CC_CFLAGS_DEFAULT = @CC_CFLAGS_DEFAULT@ +CC_CFLAGS_PROFILE_V = @CC_CFLAGS_PROFILE_V@ +CC_FOR_TARGET = @CC_FOR_TARGET@ +CC_LDFLAGS_PROFILE_V = @CC_LDFLAGS_PROFILE_V@ +CHMOD = @CHMOD@ +CMP = @CMP@ +CP = @CP@ +CPP = @CPP@ +CUSTOM_CFG_FILES = @CUSTOM_CFG_FILES@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXX_FOR_TARGET = @CXX_FOR_TARGET@ +GCCSED = @GCCSED@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +KSH = @KSH@ +LN = @LN@ +LN_S = @LN_S@ +M4 = @M4@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MV = @MV@ +PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ +PERL = @PERL@ +PROJECT_ROOT = @PROJECT_ROOT@ +RM = @RM@ +RTEMS_BSP = @RTEMS_BSP@ +RTEMS_CPU = @RTEMS_CPU@ +RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ +RTEMS_HAS_CPLUSPLUS = @RTEMS_HAS_CPLUSPLUS@ +RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@ +RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@ +RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@ +RTEMS_HAS_RDBG = @RTEMS_HAS_RDBG@ +RTEMS_HOST = @RTEMS_HOST@ +RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@ +RTEMS_ROOT = @RTEMS_ROOT@ +RTEMS_TOPdir = @RTEMS_TOPdir@ +RTEMS_USE_GCC272 = @RTEMS_USE_GCC272@ +RTEMS_USE_MACROS = @RTEMS_USE_MACROS@ +SED = @SED@ +SORT = @SORT@ +TOUCH = @TOUCH@ +VERSION = @VERSION@ +program_prefix = @program_prefix@ +rtems_cv_prog_cc_cross = @rtems_cv_prog_cc_cross@ + +AUTOMAKE_OPTIONS = foreign 1.4 + +rtems_makedir = $(prefix)/make +rtems_make_customdir = $(rtems_makedir)/custom +rtems_make_custom_DATA = @CUSTOM_CFG_FILES@ + +noinst_DATA = default.cfg + +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs +CONFIG_CLEAN_FILES = default.cfg +DATA = $(noinst_DATA) $(rtems_make_custom_DATA) + +DIST_COMMON = Makefile.am Makefile.in default.cfg.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../automake/local.am + cd $(top_srcdir) && $(AUTOMAKE) --foreign custom/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + +default.cfg: $(top_builddir)/config.status default.cfg.in + cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + +install-rtems_make_customDATA: $(rtems_make_custom_DATA) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(rtems_make_customdir) + @list='$(rtems_make_custom_DATA)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_make_customdir)/$$p"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rtems_make_customdir)/$$p; \ + else if test -f $$p; then \ + echo " $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_make_customdir)/$$p"; \ + $(INSTALL_DATA) $$p $(DESTDIR)$(rtems_make_customdir)/$$p; \ + fi; fi; \ + done + +uninstall-rtems_make_customDATA: + @$(NORMAL_UNINSTALL) + list='$(rtems_make_custom_DATA)'; for p in $$list; do \ + rm -f $(DESTDIR)$(rtems_make_customdir)/$$p; \ + done +tags: TAGS +TAGS: + + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = custom + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign custom/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: install-rtems_make_customDATA +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-rtems_make_customDATA +uninstall: uninstall-am +all-am: Makefile $(DATA) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(rtems_make_customdir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-generic clean-am + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: uninstall-rtems_make_customDATA install-rtems_make_customDATA \ +tags distdir info-am info dvi-am dvi check check-am installcheck-am \ +installcheck install-exec-am install-exec install-data-am install-data \ +install-am install uninstall-am uninstall all-redirect all-am all \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +@MAINTAINER_MODE_TRUE@$(srcdir)/default.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/custom/default.cfg +@MAINTAINER_MODE_TRUE@ sed -e 's%\$$(RTEMS_BSP)%\@RTEMS_BSP\@%g' < $< >$@ + +debug-am: +debug: debug-am +.PHONY: debug debug-am + +debug_install-am: +debug_install: debug_install-am +.PHONY: debug_install debug_install-am + +profile-am: +profile: profile-am +.PHONY: profile profile-am + +profile_install-am: +profile_install: profile_install-am +.PHONY: profile_install profile_install-am + +preinstall-am: +preinstall: preinstall-am +.PHONY: preinstall preinstall-am + +clobber-am: +clobber: clobber-am +.PHONY: clobber clobber-am + +depend-am: +depend: depend-am +.PHONY: depend depend-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/c/src/make/custom/default.cfg.in b/c/src/make/custom/default.cfg.in new file mode 100644 index 0000000000..fa35d61bd9 --- /dev/null +++ b/c/src/make/custom/default.cfg.in @@ -0,0 +1,86 @@ +# Default target settings +# +# Some of these values are redefined in the target specific .cfg files. +# +# Created by Jiri Gaisler, 16-03-97 (who is owed a debt of gratitude +# for converting RTEMS to autoconf. Thanks. --joel) +# +# $Id$ +# + +include $(RTEMS_ROOT)/make/target.cfg +include $(RTEMS_ROOT)/make/host.cfg + +# Specify here the host and target "architectures" +HOST_ARCH=o-$(RTEMS_HOST) +ifndef TARGET_ARCH +TARGET_ARCH=o-@RTEMS_BSP@ +endif + +include $(RTEMS_ROOT)/make/main.cfg + +# use the inline functions instead of the macros +# ref: src/exec/generic/Makefile +ifeq ($(RTEMS_USE_MACROS),yes) +INLINE=macros +INLINE_UPCASE= +else +INLINE=inline +INLINE_UPCASE=INLINE +endif + +# HOST Compiler config file +# You may also want to specify where the compiler resides here. +CONFIG.$(HOST_ARCH).CC = $(PROJECT_ROOT)/make/compilers/gcc.cfg + +## Target compiler config file, if any +CONFIG.$(TARGET_ARCH).CC = $(RTEMS_ROOT)/make/compilers/gcc-target-default.cfg + +## GCC specs extension file location +RTEMS_BSP_SPECS = $(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs + +## LIBC support +## Specify the one you want here and fill in the blanks. +## Currently CYGNUS newlib is supported. +## NOTE: RTEMS libcsupport.a includes RTEMS versions of stuff like +## malloc, gettimeofday, etc. + +# Define this to yes if C++ is included in the development environment. +# This requires that at least the GNU C++ compiler and libg++ be installed. +ifeq ($(RTEMS_HAS_CPLUSPLUS),yes) +HAS_CPLUSPLUS=yes +else +HAS_CPLUSPLUS=no +endif + +# Define this to yes if this target supports multiprocessor environments. +ifeq ($(RTEMS_HAS_MULTIPROCESSING),yes) +HAS_MP=yes +else +HAS_MP=no +endif + +# Define this to yes if this target wants the TCP/IP stack +ifeq ($(RTEMS_HAS_NETWORKING),yes) +HAS_NETWORKING=yes +else +HAS_NETWORKING=no +endif + +# Define this to yes if this target wants the remote debugger +ifeq ($(RTEMS_HAS_RDBG),yes) +HAS_RDBG=yes +else +HAS_RDBG=no +endif + +# Define this to yes if this target wants the posix api +ifeq ($(RTEMS_HAS_POSIX_API),yes) +HAS_POSIX_API=yes +else +HAS_POSIX_API=no +endif + +# Base name of start file +START_BASE=start + diff --git a/c/src/make/main.cfg.in b/c/src/make/main.cfg.in new file mode 100644 index 0000000000..e0af9ab95a --- /dev/null +++ b/c/src/make/main.cfg.in @@ -0,0 +1,73 @@ +# +# $Id$ +# +# make/main.cfg +# +# Make(1) configuration file include'd by all Makefile's +# + +# +# where things are relative to PROJECT_ROOT; shouldn't need to change, +# but could be overridden in custom files. +# + +PROJECT_RELEASE=$(PROJECT_ROOT)/@RTEMS_BSP@ +PROJECT_BIN=$(PROJECT_RELEASE)/bin +PROJECT_INCLUDE=$(PROJECT_RELEASE)/lib/include +PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools + +# +# Target architecture; may be changed as per 'make "ARCH=${TARGET_ARCH}-debug"' +# This is where the object files get put. +# + +ARCH=${TARGET_ARCH} + +VARIANT= + +# +# Initial target for make(1) +# Once this is established we can safely include other targets +# within this make-include file. +# + +default_target: all + +# +# Default makefile name +# May be overridden by command line macro assignment +# + +MAKEFILE=Makefile + +# +# Target variant names +# and rule to expand them into (for example): sun4 sun4-debug sun4-profile +# Note compiler config may add to TARGET_VARIANTS +# + +TARGET_VARIANTS = debug profile + +# +# Generate list of object directories: sun4, sun4-debug, sun4-profile +# +VARIANTS=${TARGET_ARCH} ${TARGET_VARIANTS:%=${TARGET_ARCH}-%} + +# +# List of "recursion-able" targets for directory Makefiles +# + +RECURSE_TARGETS=all clean protos get clobber depend install \ +preinstall-recursive \ +$(TARGET_VARIANTS) $(TARGET_VARIANTS:%=%_install) + +${ARCH}: + test -d ${ARCH} || mkdir ${ARCH} + + +# general purpose forcing dependency; try to use .PHONY instead +FORCEIT: + +FORCE: + +.PHONY: $(RECURSE_TARGETS) diff --git a/c/src/make/target.cfg.in b/c/src/make/target.cfg.in new file mode 100644 index 0000000000..f40a3753f3 --- /dev/null +++ b/c/src/make/target.cfg.in @@ -0,0 +1,72 @@ +# +# $Id$ +# +# Target specific settings. +# + +prefix = @prefix@ + +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +DEFS = @DEFS@ +LDFLAGS = +LIBS = @LIBS@ + +CC = @CC_FOR_TARGET@ +AS = @AS_FOR_TARGET@ +AR = @AR_FOR_TARGET@ +NM = @NM_FOR_TARGET@ +LD = @LD_FOR_TARGET@ +SIZE = @SIZE_FOR_TARGET@ +STRIP = @STRIP_FOR_TARGET@ +OBJCOPY = @OBJCOPY_FOR_TARGET@ +RANLIB = @RANLIB_FOR_TARGET@ + +CXX = @CXX_FOR_TARGET@ + +export CC +export AS +export LD +export NM +export AR +export SIZE +export OBJCOPY + +export CXX + +RTEMS_CROSS_TARGET=@rtems_cv_prog_cc_cross@ + +RTEMS_HOST = @RTEMS_HOST@ +RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@ +RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@ +RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@ +RTEMS_HAS_RDBG = @RTEMS_HAS_RDBG@ +RTEMS_HAS_CPLUSPLUS = @RTEMS_HAS_CPLUSPLUS@ +RTEMS_USE_MACROS = @RTEMS_USE_MACROS@ +RTEMS_USE_GCC272 = @RTEMS_USE_GCC272@ +RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@ +RTEMS_CPU = @RTEMS_CPU@ + +# the following are only used for the bare bsp +BARE_CPU_MODEL = @BARE_CPU_MODEL@ +BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@ + +XCFLAGS=$(CFLAGS_FOR_TARGET) + +export RTEMS_BSP +export RTEMS_CUSTOM +export PROJECT_ROOT + +# List (possibly empty) of required managers +# We require: +# region -- used by lib/libcsupport for malloc() +# ext -- used by libc for libc reentrancy hooks + +MANAGERS_REQUIRED=region ext sem + +# Create a RTEMS executable based on MANAGERS which was set in +# app's Makefile + +MANAGERS_NOT_WANTED=$(filter-out $(MANAGERS) \ + $(MANAGERS_REQUIRED), $(MANAGER_LIST)) + -- cgit v1.2.3