From 4a238002e71ec018723229f8669363a5ffb7302e Mon Sep 17 00:00:00 2001
From: Joel Sherrill <joel.sherrill@OARcorp.com>
Date: Thu, 18 Nov 1999 21:22:58 +0000
Subject: Patch from "John M. Mills" <jmills@tga.com> with subsequent cleanup
 from Ralf Corsepius <corsepiu@faw.uni-ulm.de> that adds initial Hitachi SH-2
 support to RTEMS.  Ralf's comments are:

    Changes:
    ------
    1. SH-Port:
    * Many files renamed.
    * CONSOLE_DEVNAME  and MHZ defines removed from libcpu.
    * console.c moved to libbsp/sh/shared, build in libbsp/sh/<BSP>/console
      applying VPATH.
    * CONSOLE_DEVNAME made BSP-specific, replacement is defined in bsp.h
    * MHZ define replaced with HZ (extendent resolution) in custom/*.cfg
    * -DHZ=HZ  used in bspstart.c, only
    * Makefile variable HZ used in bsp-dependent directories only.

    2. SH1-Port
    * clock-driver rewritten to provide better resolution for odd CPU
      frequencies. This driver is only partially tested on hardware, ie.
      sightly experimental, but I don't expect severe problems with it.
    * Polling SCI-driver added. This driver is experimental and completly
      untested yet. Therefore it is not yet used for the console (/dev/console
      is still pointing to /dev/null, cf. gensh1/bsp.h).
    * minor changes to the timer driver
    * SH1 specific delay()/CPU_delay() now is implemented as a function

    3. SH2-Port
    * Merged
    * IMO, the code is still in its infancy. Therefore I have interspersed
      comments (FIXME) it for items which I think John should look after.
    * sci and console drivers partially rewritten and extended (John, I hope
      you don't mind).
    * Copyright notices are not yet adapted
---
 c/src/lib/libcpu/sh/sh7045/sci/Makefile.in | 71 ++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 c/src/lib/libcpu/sh/sh7045/sci/Makefile.in

(limited to 'c/src/lib/libcpu/sh/sh7045/sci/Makefile.in')

diff --git a/c/src/lib/libcpu/sh/sh7045/sci/Makefile.in b/c/src/lib/libcpu/sh/sh7045/sci/Makefile.in
new file mode 100644
index 0000000000..2548c0b478
--- /dev/null
+++ b/c/src/lib/libcpu/sh/sh7045/sci/Makefile.in
@@ -0,0 +1,71 @@
+##
+##  $Id$
+##
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+top_builddir = ../../..
+subdir = sh/sh7045/sci
+
+RTEMS_ROOT = @RTEMS_ROOT@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
+PGM = ${ARCH}/sci.rel
+
+# C source names, if any, go here -- minus the .c
+C_PIECES = sci
+C_FILES = $(C_PIECES:%=%.c)
+C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+
+H_FILES =
+
+# Assembly source names, if any, go here -- minus the .s
+S_PIECES =
+S_FILES = $(S_PIECES:%=%.s)
+S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o)
+
+SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
+OBJS = $(C_O_FILES) $(S_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
+
+INSTALL_CHANGE = @INSTALL_CHANGE@
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+DEFINES +=
+CPPFLAGS +=
+CFLAGS +=
+
+LD_PATHS +=
+LD_LIBS +=
+LDFLAGS +=
+
+#
+# Add your list of files to delete here.  The config files
+#  already know how to delete some stuff, so you may want
+#  to just run 'make clean' first to see what gets missed.
+#  'make clobber' already includes 'make clean'
+#
+
+CLEAN_ADDITIONS +=
+CLOBBER_ADDITIONS +=
+
+${PGM}: ${SRCS} ${OBJS}
+	$(make-rel)
+
+all: ${ARCH} $(SRCS) $(PGM)
+
+# the .rel file built here will be put into libbsp.a by 
+# 	libbsp/sh/BSP/wrapup/Makefile
+install: all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-- 
cgit v1.2.3