From 35d7b15cb091b4062568978037853285ebb503b3 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Tue, 21 Dec 1999 14:41:43 +0000 Subject: Patch rtems-rc-19991203-7.diff from Ralf Corsepius which adds partial automake support to libcpu//*. Until now I have only implemented full automake support for the sh (my demonstration example :) and the i386 (inevitiable for structural reasons of this subdirectory). For all other cpus only their toplevel directories (exception: powerpc), include subdirectories and a few selected subdirectories have been converted to automake. I did this on purpose, because add automake support to each subdirectory requires individual adaptations which to be tested individually. Additionally the weirdnesses of the powerpc subdirectories hit again, esp. some powerpc cpu-models * install files to $(PROJECT_INCLUDE)// while others install them to $(PROJECT_INCLUDE)/ * the scheme used to configure libcpu/powerpc/ is difficult to implement using automake, therefore this subdirectory still is configured by autoconf (The one out of an unlimited set selection scheme hits again :), though powerpc/*/* subdirectories already apply automake. The patch also reveils structural weaknesses in RTEMS: E.g. There seem to exist at least 5 different general schemes: * Not using libcpu at all (eg. i960) * Strictly tree-style a libcpu//* (eg. m68k, sh) * Flat libcpu directory layout with cpu-variants merged into sources or not destinguishing cpu-variants (i386) * Not supporting variants with deep source tree (sparc, hppa, mips64orion) * Woven directory structure with shared directories (powerpc) I regret having to say this, but from my POV this means, that there doesn't exist a general implementation scheme for libcpu at all. To apply: rm -rf ./c/src/lib/libcpu/i386/wrapup rm -rf ./c/src/lib/libcpu/mips64orion/include rm -rf ./c/src/lib/libcpu/powerpc/ppc403/include patch -p1 < rtems-rc-19991203-7.diff ./bootstrap --- c/src/lib/libcpu/sh/sh7032/clock/Makefile.in | 257 ++++++++++++++++++++++----- 1 file changed, 213 insertions(+), 44 deletions(-) (limited to 'c/src/lib/libcpu/sh/sh7032/clock') diff --git a/c/src/lib/libcpu/sh/sh7032/clock/Makefile.in b/c/src/lib/libcpu/sh/sh7032/clock/Makefile.in index 523533363f..9a4223d97f 100644 --- a/c/src/lib/libcpu/sh/sh7032/clock/Makefile.in +++ b/c/src/lib/libcpu/sh/sh7032/clock/Makefile.in @@ -1,71 +1,240 @@ -# -# $Id$ -# +# Makefile.in generated automatically by automake 1.4a from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + + +SHELL = @SHELL@ -@SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = sh/sh7032/clock - -RTEMS_ROOT = @RTEMS_ROOT@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = ../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_FLAG = +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +CC = @CC@ +CC_FOR_TARGET = @CC_FOR_TARGET@ +CPP = @CPP@ +GCCSED = @GCCSED@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ +PROJECT_INCLUDE = @PROJECT_INCLUDE@ +PROJECT_RELEASE = @PROJECT_RELEASE@ PROJECT_ROOT = @PROJECT_ROOT@ +RTEMS_BSP = @RTEMS_BSP@ +RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@ +RTEMS_CPU = @RTEMS_CPU@ +RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@ +RTEMS_HOST = @RTEMS_HOST@ +RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@ +RTEMS_ROOT = @RTEMS_ROOT@ +RTEMS_TOPdir = @RTEMS_TOPdir@ +VERSION = @VERSION@ -VPATH = @srcdir@ +AUTOMAKE_OPTIONS = foreign 1.4 PGM = ${ARCH}/clock.rel -# C source names, if any, go here -- minus the .c -C_PIECES = ckinit -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) +C_FILES = ckinit.c +C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o) -H_FILES = +H_FILES = -# Assembly source names, if any, go here -- minus the .S -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) +S_FILES = S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS = $(C_FILES) $(H_FILES) $(S_FILES) OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) +AM_CFLAGS = $(CFLAGS_OS_V) -LD_PATHS += -LD_LIBS += -LDFLAGS += +EXTRA_DIST = $(C_FILES) $(S_FILES) +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs +CONFIG_CLEAN_FILES = +DIST_COMMON = Makefile.am Makefile.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am + cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7032/clock/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + +tags: TAGS +TAGS: -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = sh7032/clock + +distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7032/clock/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install +installdirs: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-generic clean-am + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: tags distdir info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean + + +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg +include $(RTEMS_ROOT)/make/leaf.cfg ${PGM}: ${OBJS} ${make-rel} -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(PGM) -# the .rel file built here will be put into libbsp.a by -# libbsp/sh/BSP/wrapup/Makefile -install: all +debug-am: +debug: debug-am +.PHONY: debug debug-am -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status +profile-am: +profile: profile-am +.PHONY: profile profile-am + +preinstall-am: $(PREINSTALL_FILES) +preinstall: preinstall-am +.PHONY: preinstall preinstall-am + +depend-am: +depend: depend-am +.PHONY: depend depend-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -- cgit v1.2.3