From 7a8e71bd708ac77653b578c250e76c4c3271ca92 Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Tue, 24 Apr 2018 07:36:46 +0200 Subject: bsps/i386: Move shared files to bsps This patch is a part of the BSP source reorganization. Update #3285. --- c/src/lib/libbsp/i386/pc386/Makefile.am | 16 +- c/src/lib/libbsp/i386/shared/comm/GDB.HOWTO | 84 -- c/src/lib/libbsp/i386/shared/comm/gdb_glue.c | 61 - c/src/lib/libbsp/i386/shared/comm/i386-stub-glue.c | 273 ----- c/src/lib/libbsp/i386/shared/comm/i386-stub.c | 1171 -------------------- c/src/lib/libbsp/i386/shared/comm/tty_drv.c | 413 ------- c/src/lib/libbsp/i386/shared/comm/uart.c | 959 ---------------- .../libbsp/i386/shared/realmode_int/realmode_int.c | 454 -------- c/src/lib/libbsp/i386/shared/smp/README | 10 - c/src/lib/libbsp/i386/shared/smp/getcpuid.c | 22 - c/src/lib/libbsp/i386/shared/smp/smp-imps.c | 828 -------------- 11 files changed, 8 insertions(+), 4283 deletions(-) delete mode 100644 c/src/lib/libbsp/i386/shared/comm/GDB.HOWTO delete mode 100644 c/src/lib/libbsp/i386/shared/comm/gdb_glue.c delete mode 100644 c/src/lib/libbsp/i386/shared/comm/i386-stub-glue.c delete mode 100644 c/src/lib/libbsp/i386/shared/comm/i386-stub.c delete mode 100644 c/src/lib/libbsp/i386/shared/comm/tty_drv.c delete mode 100644 c/src/lib/libbsp/i386/shared/comm/uart.c delete mode 100644 c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.c delete mode 100644 c/src/lib/libbsp/i386/shared/smp/README delete mode 100644 c/src/lib/libbsp/i386/shared/smp/getcpuid.c delete mode 100644 c/src/lib/libbsp/i386/shared/smp/smp-imps.c (limited to 'c/src/lib/libbsp') diff --git a/c/src/lib/libbsp/i386/pc386/Makefile.am b/c/src/lib/libbsp/i386/pc386/Makefile.am index b15092e7f9..94eef01035 100644 --- a/c/src/lib/libbsp/i386/pc386/Makefile.am +++ b/c/src/lib/libbsp/i386/pc386/Makefile.am @@ -77,9 +77,9 @@ endif # console (non-graphics support) librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/serial_mouse_config.c -librtemsbsp_a_SOURCES += ../shared/comm/uart.c -librtemsbsp_a_SOURCES += ../shared/comm/tty_drv.c -librtemsbsp_a_SOURCES += ../shared/realmode_int/realmode_int.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/uart.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/tty_drv.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/start/realmode_int.c librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/serial/legacy-console.c librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/console_select.c librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/console_control.c @@ -91,9 +91,9 @@ librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/uart_bus_pci. librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/gdb_select.c # gdb -librtemsbsp_a_SOURCES += ../shared/comm/i386-stub.c -librtemsbsp_a_SOURCES += ../shared/comm/i386-stub-glue.c -librtemsbsp_a_SOURCES += ../shared/comm/gdb_glue.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/i386-stub.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/i386-stub-glue.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/console/gdb_glue.c # gnat @@ -132,8 +132,8 @@ librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/ata/idecfg.c endif if HAS_SMP -librtemsbsp_a_SOURCES += ../shared/smp/getcpuid.c -librtemsbsp_a_SOURCES += ../shared/smp/smp-imps.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/start/getcpuid.c +librtemsbsp_a_SOURCES += ../../../../../../bsps/i386/pc386/start/smp-imps.c project_lib_DATA += appstart.$(OBJEXT) appcpustart.$(OBJEXT): ../../../../../../bsps/i386/pc386/start/start16.S diff --git a/c/src/lib/libbsp/i386/shared/comm/GDB.HOWTO b/c/src/lib/libbsp/i386/shared/comm/GDB.HOWTO deleted file mode 100644 index d5e0326781..0000000000 --- a/c/src/lib/libbsp/i386/shared/comm/GDB.HOWTO +++ /dev/null @@ -1,84 +0,0 @@ -i386/pc386 GDB Stub - -The i386 GDB stub has been updated to use the libchip drivers for the -NS16550. Make sure you have detect the device and you have added a console -entry. On the PC the legacy and PCI boards are supported. - -This GDB stub glue code is specific to the UART protocol defined in libbchip. - -The pc386 BSP has boot command line options to manage GDB support. - -a) Find the minor number of the console device: - - #include - - rtems_device_minor_number minor = 0; - - if (console_find_console_entry("/dev/com1", - strlen("/dev/com1") - 1, &minor) == NULL) - error("driver not found\n"); - -Note, this call is part of the private console API and may change. - -b) To start GDB stub, run this: - - #include - - /* Init GDB glue */ - i386_stub_glue_init(minor); - - /* Init GDB stub itself */ - set_debug_traps(); - - /* - * Init GDB break in capability, - * has to be called after - * set_debug_traps - */ - i386_stub_glue_init_breakin(); - - /* Put breakpoint in */ - breakpoint(); - -c) To run use GDB: - - $ i386-rtems4.12-gdb hello.exe - GNU gdb (GDB) 7.11 - Copyright (C) 2016 Free Software Foundation, Inc. - License GPLv3+: GNU GPL version 3 or later - This is free software: you are free to change and redistribute it. - There is NO WARRANTY, to the extent permitted by law. Type "show copying" - and "show warranty" for details. - This GDB was configured as "--host=x86_64-freebsd10.1 --target=i386-rtems4.12". - Type "show configuration" for configuration details. - For bug reporting instructions, please see: - . - Find the GDB manual and other documentation resources online at: - . - For help, type "help". - Type "apropos word" to search for commands related to "word"... - Reading symbols from hello.exe...done. - (gdb) target remote /dev/cuaU5 - Remote debugging using /dev/cuaU5 - 0x00103fda in breakpoint () at i386-stub.c:1004 - 1004 BREAKPOINT (); - (gdb) b Init - Breakpoint 1 at 0x1001e0: file init.c, line 29. - (gdb) c - Continuing. - - Breakpoint 1, Init (ignored=1269800) at init.c:29 - 29 { - (gdb) - -Pressing ^C works and if running the board should halt when GDB connects. - -e) Use ser2net to provide reomve access over a network to a board. Install the -ser2net package and add a configuration for the port GDB connects to. For -example: - - 0005:raw:0:/dev/cuaU5:115200 - -Start ser2net running then connect GDB using: - - (gdb) target remote myhost:30005 diff --git a/c/src/lib/libbsp/i386/shared/comm/gdb_glue.c b/c/src/lib/libbsp/i386/shared/comm/gdb_glue.c deleted file mode 100644 index aededea7e8..0000000000 --- a/c/src/lib/libbsp/i386/shared/comm/gdb_glue.c +++ /dev/null @@ -1,61 +0,0 @@ -/* gdb_glue - * - * Interface to initialize the GDB. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#include -#include -#include - -#define BREAKPOINT() __asm__ (" int $3"); - -extern int BSPConsolePort; -void i386_stub_glue_init(int); -void i386_stub_glue_init_breakin(void); -void set_debug_traps(void); - - /* Init GDB glue */ -void init_remote_gdb( void ) -{ - if(BSPConsolePort != BSP_UART_COM2) - { - /* - * If com2 is not used as console use it for - * debugging - */ - - i386_stub_glue_init(BSP_UART_COM2); - printf( "Remote GDB using COM2...\n" ); - - } - else - { - /* Otherwise use com1 */ - i386_stub_glue_init(BSP_UART_COM1); - printf( "Remote GDB using COM1...\n" ); - } - - printf( "Remote GDB: setting traps...\n" ); - /* Init GDB stub itself */ - set_debug_traps(); - - printf( "Remote GDB: waiting remote connection....\n" ); - - /* - * Init GDB break in capability, - * has to be called after - * set_debug_traps - */ - i386_stub_glue_init_breakin(); - - /* Put breakpoint in */ - /* breakpoint(); */ - /* BREAKPOINT(); */ -} diff --git a/c/src/lib/libbsp/i386/shared/comm/i386-stub-glue.c b/c/src/lib/libbsp/i386/shared/comm/i386-stub-glue.c deleted file mode 100644 index 96105e8a21..0000000000 --- a/c/src/lib/libbsp/i386/shared/comm/i386-stub-glue.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * Copyright (c) 2016. - * Chris Johns - * - * This software is Copyright (C) 1998 by T.sqware - all rights limited - * It is provided in to the public domain "as is", can be freely modified - * as far as this copyight notice is kept unchanged, but does not imply - * an endorsement by T.sqware of the product in which it is included. - */ - -#include -#include -#include - -#include "../../../../../../../bsps/shared/dev/serial/legacy-console.h" - -int putDebugChar(int ch); /* write a single character */ -int getDebugChar(void); /* read and return a single char */ - -/* Check is any characters received are a ^C */ -int i386_gdb_uart_ctrl_c_check(void); - -/* Raw interrupt handler. */ -void i386_gdb_uart_isr(void); - -/* assign an exception handler */ -void exceptionHandler(int, void (*handler)(void)); - -/* User supplied remote debug option. */ -extern int remote_debug; - -/* Current uart and port used by the gdb stub */ -static int uart_current; -static int uart_vector; -static console_tbl* port_current; - -/* - * Interrupt service routine for all, it does it check whether ^C is received - * if yes it will flip TF bit before returning. - * - * Note: it should be installed as raw interrupt handler. - * - * Warning: I do not like the use of the global data, I am not - * sure if this is SMP safe. - */ -int i386_gdb_uart_isr_regsav[4] RTEMS_UNUSED; -__asm__ (".p2align 4"); -__asm__ (".text"); -__asm__ (".globl i386_gdb_uart_isr"); -__asm__ ("i386_gdb_uart_isr:"); -__asm__ (" pusha"); /* Push all */ -__asm__ (" call i386_gdb_uart_ctrl_c_check"); /* Look for ^C */ -__asm__ (" movl %eax, i386_gdb_uart_isr_regsav"); /* Save eax */ -__asm__ (" popa"); /* Pop all */ -__asm__ (" xchgl %eax, i386_gdb_uart_isr_regsav"); /* Exchange eax */ -__asm__ (" cmpl $0, %eax"); /* 1 == ^C */ -__asm__ (" je i386_gdb_uart_isr_1"); /* branch if 0 */ -__asm__ (" movl %ebx, i386_gdb_uart_isr_regsav + 4"); /* Save ebx */ -__asm__ (" movl %edx, i386_gdb_uart_isr_regsav + 8"); /* Save edx */ -__asm__ (" popl %ebx"); /* Pop eip */ -__asm__ (" popl %edx"); /* Pop cs */ -__asm__ (" popl %eax"); /* Pop flags */ -__asm__ (" orl $0x100, %eax"); /* Modify it */ -__asm__ (" pushl %eax"); /* Push it back */ -__asm__ (" pushl %edx"); /* Push cs */ -__asm__ (" pushl %ebx"); /* Push eip */ -__asm__ (" movl i386_gdb_uart_isr_regsav + 4, %ebx"); /* Restore ebx */ -__asm__ (" movl i386_gdb_uart_isr_regsav + 8, %edx"); /* Restore edx */ -__asm__ ("i386_gdb_uart_isr_1:"); -__asm__ (" movl i386_gdb_uart_isr_regsav, %eax"); /* Restore eax */ -__asm__ (" iret"); /* Done */ - -static int gdb_hello_index; -static const char *const gdb_hello = "+"; - -static inline uint8_t BSP_i8259a_irq_in_service_reg(uint32_t ioport) -{ - uint8_t isr; - outport_byte(ioport, PIC_OCW3_SEL | PIC_OCW3_RR | PIC_OCW3_RIS); - inport_byte(ioport, isr); - outport_byte(ioport, PIC_OCW3_SEL | PIC_OCW3_RR); - return isr; -} - -static inline void BSP_irq_ack_at_i8259a(const int irqLine) -{ - uint8_t slave_isr = 0; - if (irqLine >= 8) { - outport_byte(PIC_SLAVE_COMMAND_IO_PORT, PIC_EOI); - slave_isr = BSP_i8259a_irq_in_service_reg(PIC_SLAVE_COMMAND_IO_PORT); - } - - /* - * Only issue the EOI to the master if there are no more interrupts in - * service for the slave. i8259a data sheet page 18, The Special Fully Nested - * Mode, b. - */ - if (slave_isr == 0) - outport_byte(PIC_MASTER_COMMAND_IO_PORT, PIC_EOI); -} - -int i386_gdb_uart_ctrl_c_check(void) -{ - BSP_irq_ack_at_i8259a(uart_vector); - if (port_current) { - int c = 0; - while (c >= 0) { - c = port_current->pDeviceFns->deviceRead(uart_current); - if (c == 3) { - gdb_hello_index = 0; - return 1; - } else if (gdb_hello[gdb_hello_index] == (char) c) { - ++gdb_hello_index; - if (gdb_hello[gdb_hello_index] == '\0') { - gdb_hello_index = 0; - return 1; - } - } else { - gdb_hello_index = 0; - } - } - } - return 0; -} - -static void -nop(const rtems_raw_irq_connect_data* notused) -{ -} - -static int -isOn(const rtems_raw_irq_connect_data* notused) -{ - return 1; -} - -int i386_stub_glue_uart(void) -{ - if (port_current == NULL) - return -1; - return uart_current; -} - -/* - * Initialize glue code linking i386-stub with the rest of - * the system - */ -void -i386_stub_glue_init(int uart) -{ - rtems_device_minor_number minor = (rtems_device_minor_number) uart; - - port_current = console_find_console_entry(NULL, 0, &minor); - - if (port_current == NULL) { - printk("GDB: invalid minor number for UART\n"); - return; - } - - uart_current = uart; - - /* Intialise the UART, assuming polled drivers */ - port_current->pDeviceFns->deviceInitialize(uart); -} - -static void BSP_uart_on(const rtems_raw_irq_connect_data* used) -{ - bsp_interrupt_vector_enable(used->idtIndex - BSP_IRQ_VECTOR_BASE); -} - -static void BSP_uart_off(const rtems_raw_irq_connect_data* used) -{ - bsp_interrupt_vector_disable(used->idtIndex - BSP_IRQ_VECTOR_BASE); -} - -/* - * In order to have a possibility to break into - * running program, one has to call this function - */ -void i386_stub_glue_init_breakin(void) -{ - rtems_raw_irq_connect_data uart_raw_irq_data; - - if (port_current == NULL) { - printk("GDB: no port initialised\n"); - return; - } - - if ((port_current->ulIntVector == 0) || (port_current->ulIntVector > 16)) { - printk("GDB: no UART interrupt support\n"); - } - else { - uart_vector = port_current->ulIntVector; - uart_raw_irq_data.idtIndex = port_current->ulIntVector + BSP_IRQ_VECTOR_BASE; - - if (!i386_get_current_idt_entry(&uart_raw_irq_data)) { - printk("GBD: cannot get idt entry\n"); - rtems_fatal_error_occurred(1); - } - - if (!i386_delete_idt_entry(&uart_raw_irq_data)) { - printk("GDB: cannot delete idt entry\n"); - rtems_fatal_error_occurred(1); - } - - uart_raw_irq_data.on = BSP_uart_on; - uart_raw_irq_data.off = BSP_uart_off; - - /* Install ISR */ - uart_raw_irq_data.idtIndex = port_current->ulIntVector + BSP_IRQ_VECTOR_BASE; - uart_raw_irq_data.hdl = i386_gdb_uart_isr; - - if (!i386_set_idt_entry (&uart_raw_irq_data)) { - printk("GDB: raw exception handler connection failed\n"); - rtems_fatal_error_occurred(1); - } - - /* Enable interrupts, this is a bit of a hack because we - * have to know the device but there is no other call. */ - (*port_current->setRegister)(port_current->ulCtrlPort1, 1, 0x01); - } -} - -int -putDebugChar(int ch) -{ - if (port_current != NULL) { - port_current->pDeviceFns->deviceWritePolled(uart_current, ch); - } - return 1; -} - -int getDebugChar(void) -{ - int c = -1; - - if (port_current != NULL) { - while (c < 0) - c = port_current->pDeviceFns->deviceRead(uart_current); - } - - return c; -} - -void exceptionHandler(int vector, void (*handler)(void)) -{ - rtems_raw_irq_connect_data excep_raw_irq_data; - - excep_raw_irq_data.idtIndex = vector; - - if(!i386_get_current_idt_entry(&excep_raw_irq_data)) - { - printk("GDB: cannot get idt entry\n"); - rtems_fatal_error_occurred(1); - } - - if(!i386_delete_idt_entry(&excep_raw_irq_data)) - { - printk("GDB: cannot delete idt entry\n"); - rtems_fatal_error_occurred(1); - } - - excep_raw_irq_data.on = nop; - excep_raw_irq_data.off = nop; - excep_raw_irq_data.isOn = isOn; - excep_raw_irq_data.hdl = handler; - - if (!i386_set_idt_entry (&excep_raw_irq_data)) { - printk("GDB: raw exception handler connection failed\n"); - rtems_fatal_error_occurred(1); - } - return; -} diff --git a/c/src/lib/libbsp/i386/shared/comm/i386-stub.c b/c/src/lib/libbsp/i386/shared/comm/i386-stub.c deleted file mode 100644 index 1eff100e9e..0000000000 --- a/c/src/lib/libbsp/i386/shared/comm/i386-stub.c +++ /dev/null @@ -1,1171 +0,0 @@ -/* - * This is the gdb i386 remote debug stub from gdb 4.XX. - */ - -/**************************************************************************** - - THIS SOFTWARE IS NOT COPYRIGHTED - - HP offers the following for use in the public domain. HP makes no - warranty with regard to the software or it's performance and the - user accepts the software "AS IS" with all faults. - - HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD - TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. - - ****************************************************************************/ - -/**************************************************************************** - * Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $ - * - * Module name: remcom.c $ - * Revision: 1.34 $ - * Date: 91/03/09 12:29:49 $ - * Contributor: Lake Stevens Instrument Division$ - * - * Description: low level support for gdb debugger. $ - * - * Considerations: only works on target hardware $ - * - * Written by: Glenn Engel $ - * ModuleState: Experimental $ - * - * NOTES: See Below $ - * - * Modified for 386 by Jim Kingdon, Cygnus Support. - * Modified for RTEMS by Aleksey Romanov, Quality Quorum, Inc. - * - * To enable debugger support, two things need to happen. One, a - * call to set_debug_traps() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This - * is most easily accomplished by a call to breakpoint(). Breakpoint() - * simulates a breakpoint by executing a trap #1. - * - * The external function exceptionHandler() is - * used to attach a specific handler to a specific 386 vector number. - * It should use the same privilege level it runs at. It should - * install it as an interrupt gate so that interrupts are masked - * while the handler runs. - * Also, need to assign exceptionHook and oldExceptionHook. - * - * Because gdb will sometimes write to the stack area to execute function - * calls, this program cannot rely on using the supervisor stack so it - * uses it's own stack area reserved in the int array remcomStack. - * - ************* - * - * The following gdb commands are supported: - * - * command function Return value - * - * g return the value of the CPU registers hex data or ENN - * G set the value of the CPU registers OK or ENN - * - * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN - * - * c Resume at current address SNN ( signal NN) - * cAA..AA Continue at address AA..AA SNN - * - * s Step one instruction SNN - * sAA..AA Step one instruction from AA..AA SNN - * - * k kill - * - * ? What was the last sigval ? SNN (signal NN) - * - * All commands and responses are sent with a packet which includes a - * checksum. A packet consists of - * - * $#. - * - * where - * :: - * :: < two hex digits computed as modulo 256 sum of > - * - * When a packet is received, it is first acknowledged with either '+' or '-'. - * '+' indicates a successful transfer. '-' indicates a failed transfer. - * - * Example: - * - * Host: Reply: - * $m0,10#2a +$00010203040506070809101112131415#42 - * - ****************************************************************************/ - -#include -#include -#include - -#include - -/* - * Number of debug registers. - */ -#define NUM_DEBUG_REGISTERS 4 - -/* - * Prototypes we need to avoid warnings but not going into public space. - */ -void bsp_reset(void); -void breakpoint (void); -void set_debug_traps(void); -void set_mem_err(void); -void _returnFromException(void); -void exceptionHandler (int, void (*handler) (void)); - -/************************************************************************ - * - * external low-level support routines - */ -extern int putDebugChar (int ch); /* write a single character */ -extern int getDebugChar (void); /* read and return a single char */ - - -/************************************************************************/ -/* BUFMAX defines the maximum number of characters in inbound/outbound buffers */ -/* at least NUMREGBYTES*2 are needed for register packets */ -#define BUFMAX 400 - -static bool initialized = false; /* boolean flag. != 0 means we've been initialized */ - -extern int remote_debug; -/* debug > 0 prints ill-formed commands in valid packets & checksum errors */ - -extern void waitabit (void); - -static const char hexchars[] = "0123456789abcdef"; - -/* Number of registers. */ -#define NUMREGS 16 - -/* Number of bytes per register. */ -#define REGBYTES 4 - -/* Number of bytes of registers. */ -#define NUMREGBYTES (NUMREGS * REGBYTES) - -enum regnames - { - EAX, ECX, EDX, EBX, ESP, EBP, ESI, EDI, - PC /* also known as eip */ , - PS /* also known as eflags */ , - CS, SS, DS, ES, FS, GS - }; - -/* - * these should not be static cuz they can be used outside this module - */ - -int i386_gdb_registers[NUMREGS]; - -#define STACKSIZE 10000 -int i386_gdb_remcomStack[STACKSIZE / sizeof (int)]; -int *i386_gdb_stackPtr = &i386_gdb_remcomStack[STACKSIZE / sizeof (int) - 1]; - -static int gdb_connected; - -/*************************** ASSEMBLY CODE MACROS *************************/ -/* */ - -extern void - return_to_prog (void); - -/* Restore the program's registers (including the stack pointer, which - means we get the right stack and don't have to worry about popping our - return address and any stack frames and so on) and return. */ -__asm__ (".text"); -__asm__ (".globl return_to_prog"); -__asm__ ("return_to_prog:"); -__asm__ (" movw i386_gdb_registers+44, %ss"); -__asm__ (" movl i386_gdb_registers+16, %esp"); -__asm__ (" movl i386_gdb_registers+4, %ecx"); -__asm__ (" movl i386_gdb_registers+8, %edx"); -__asm__ (" movl i386_gdb_registers+12, %ebx"); -__asm__ (" movl i386_gdb_registers+20, %ebp"); -__asm__ (" movl i386_gdb_registers+24, %esi"); -__asm__ (" movl i386_gdb_registers+28, %edi"); -__asm__ (" movw i386_gdb_registers+48, %ds"); -__asm__ (" movw i386_gdb_registers+52, %es"); -__asm__ (" movw i386_gdb_registers+56, %fs"); -__asm__ (" movw i386_gdb_registers+60, %gs"); -__asm__ (" movl i386_gdb_registers+36, %eax"); -__asm__ (" pushl %eax"); /* saved eflags */ -__asm__ (" movl i386_gdb_registers+40, %eax"); -__asm__ (" pushl %eax"); /* saved cs */ -__asm__ (" movl i386_gdb_registers+32, %eax"); -__asm__ (" pushl %eax"); /* saved eip */ -__asm__ (" movl i386_gdb_registers, %eax"); -/* use iret to restore pc and flags together so - that trace flag works right. */ -__asm__ (" iret"); - -#define BREAKPOINT() __asm__ (" int $3"); - -/* Put the error code here just in case the user cares. */ -int gdb_i386errcode; -/* Likewise, the vector number here (since GDB only gets the signal - number through the usual means, and that's not very specific). */ -int gdb_i386vector = -1; - -/* GDB stores segment registers in 32-bit words (that's just the way - m-i386v.h is written). So zero the appropriate areas in registers. */ -#define SAVE_REGISTERS1() \ - __asm__ ("movl %eax, i386_gdb_registers"); \ - __asm__ ("movl %ecx, i386_gdb_registers+4"); \ - __asm__ ("movl %edx, i386_gdb_registers+8"); \ - __asm__ ("movl %ebx, i386_gdb_registers+12"); \ - __asm__ ("movl %ebp, i386_gdb_registers+20"); \ - __asm__ ("movl %esi, i386_gdb_registers+24"); \ - __asm__ ("movl %edi, i386_gdb_registers+28"); \ - __asm__ ("movw $0, %ax"); \ - __asm__ ("movw %ds, i386_gdb_registers+48"); \ - __asm__ ("movw %ax, i386_gdb_registers+50"); \ - __asm__ ("movw %es, i386_gdb_registers+52"); \ - __asm__ ("movw %ax, i386_gdb_registers+54"); \ - __asm__ ("movw %fs, i386_gdb_registers+56"); \ - __asm__ ("movw %ax, i386_gdb_registers+58"); \ - __asm__ ("movw %gs, i386_gdb_registers+60"); \ - __asm__ ("movw %ax, i386_gdb_registers+62"); -#define SAVE_ERRCODE() \ - __asm__ ("popl %ebx"); \ - __asm__ ("movl %ebx, gdb_i386errcode"); -#define SAVE_REGISTERS2() \ - __asm__ ("popl %ebx"); /* old eip */ \ - __asm__ ("movl %ebx, i386_gdb_registers+32"); \ - __asm__ ("popl %ebx"); /* old cs */ \ - __asm__ ("movl %ebx, i386_gdb_registers+40"); \ - __asm__ ("movw %ax, i386_gdb_registers+42"); \ - __asm__ ("popl %ebx"); /* old eflags */ \ - __asm__ ("movl %ebx, i386_gdb_registers+36"); \ - /* Now that we've done the pops, we can save the stack pointer."); */ \ - __asm__ ("movw %ss, i386_gdb_registers+44"); \ - __asm__ ("movw %ax, i386_gdb_registers+46"); \ - __asm__ ("movl %esp, i386_gdb_registers+16"); - -/* See if mem_fault_routine is set, if so just IRET to that address. */ -#define CHECK_FAULT() \ - __asm__ ("cmpl $0, mem_fault_routine"); \ - __asm__ ("jne mem_fault"); - -__asm__ (".text"); -__asm__ ("mem_fault:"); -/* OK to clobber temp registers; we're just going to end up in set_mem_err. */ -/* Pop error code from the stack and save it. */ -__asm__ (" popl %eax"); -__asm__ (" movl %eax, gdb_i386errcode"); - -__asm__ (" popl %eax"); /* eip */ -/* We don't want to return there, we want to return to the function - pointed to by mem_fault_routine instead. */ -__asm__ (" movl mem_fault_routine, %eax"); -__asm__ (" popl %ecx"); /* cs (low 16 bits; junk in hi 16 bits). */ -__asm__ (" popl %edx"); /* eflags */ - -/* Remove this stack frame; when we do the iret, we will be going to - the start of a function, so we want the stack to look just like it - would after a "call" instruction. */ -__asm__ (" leave"); - -/* Push the stuff that iret wants. */ -__asm__ (" pushl %edx"); /* eflags */ -__asm__ (" pushl %ecx"); /* cs */ -__asm__ (" pushl %eax"); /* eip */ - -/* Zero mem_fault_routine. */ -__asm__ (" movl $0, %eax"); -__asm__ (" movl %eax, mem_fault_routine"); - -__asm__ ("iret"); - -#define CALL_HOOK() __asm__ ("call _remcomHandler"); - -/* This function is called when a i386 exception occurs. It saves - * all the cpu regs in the registers array, munges the stack a bit, - * and invokes an exception handler (remcom_handler). - * - * stack on entry: stack on exit: - * old eflags vector number - * old cs (zero-filled to 32 bits) - * old eip - * - */ -extern void _catchException3 (void); -__asm__ (".text"); -__asm__ (".globl _catchException3"); -__asm__ ("_catchException3:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $3"); -CALL_HOOK (); - -/* Same thing for exception 1. */ -extern void _catchException1 (void); -__asm__ (".text"); -__asm__ (".globl _catchException1"); -__asm__ ("_catchException1:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $1"); -CALL_HOOK (); - -/* Same thing for exception 0. */ -extern void _catchException0 (void); -__asm__ (".text"); -__asm__ (".globl _catchException0"); -__asm__ ("_catchException0:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $0"); -CALL_HOOK (); - -/* Same thing for exception 4. */ -extern void _catchException4 (void); -__asm__ (".text"); -__asm__ (".globl _catchException4"); -__asm__ ("_catchException4:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $4"); -CALL_HOOK (); - -/* Same thing for exception 5. */ -extern void _catchException5 (void); -__asm__ (".text"); -__asm__ (".globl _catchException5"); -__asm__ ("_catchException5:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $5"); -CALL_HOOK (); - -/* Same thing for exception 6. */ -extern void _catchException6 (void); -__asm__ (".text"); -__asm__ (".globl _catchException6"); -__asm__ ("_catchException6:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $6"); -CALL_HOOK (); - -/* Same thing for exception 7. */ -extern void _catchException7 (void); -__asm__ (".text"); -__asm__ (".globl _catchException7"); -__asm__ ("_catchException7:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $7"); -CALL_HOOK (); - -/* Same thing for exception 8. */ -extern void _catchException8 (void); -__asm__ (".text"); -__asm__ (".globl _catchException8"); -__asm__ ("_catchException8:"); -SAVE_REGISTERS1 (); -SAVE_ERRCODE (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $8"); -CALL_HOOK (); - -/* Same thing for exception 9. */ -extern void _catchException9 (void); -__asm__ (".text"); -__asm__ (".globl _catchException9"); -__asm__ ("_catchException9:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $9"); -CALL_HOOK (); - -/* Same thing for exception 10. */ -extern void _catchException10 (void); -__asm__ (".text"); -__asm__ (".globl _catchException10"); -__asm__ ("_catchException10:"); -SAVE_REGISTERS1 (); -SAVE_ERRCODE (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $10"); -CALL_HOOK (); - -/* Same thing for exception 12. */ -extern void _catchException12 (void); -__asm__ (".text"); -__asm__ (".globl _catchException12"); -__asm__ ("_catchException12:"); -SAVE_REGISTERS1 (); -SAVE_ERRCODE (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $12"); -CALL_HOOK (); - -/* Same thing for exception 16. */ -extern void _catchException16 (void); -__asm__ (".text"); -__asm__ (".globl _catchException16"); -__asm__ ("_catchException16:"); -SAVE_REGISTERS1 (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $16"); -CALL_HOOK (); - -/* For 13, 11, and 14 we have to deal with the CHECK_FAULT stuff. */ - -/* Same thing for exception 13. */ -extern void _catchException13 (void); -__asm__ (".text"); -__asm__ (".globl _catchException13"); -__asm__ ("_catchException13:"); -CHECK_FAULT (); -SAVE_REGISTERS1 (); -SAVE_ERRCODE (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $13"); -CALL_HOOK (); - -/* Same thing for exception 11. */ -extern void _catchException11 (void); -__asm__ (".text"); -__asm__ (".globl _catchException11"); -__asm__ ("_catchException11:"); -CHECK_FAULT (); -SAVE_REGISTERS1 (); -SAVE_ERRCODE (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $11"); -CALL_HOOK (); - -/* Same thing for exception 14. */ -extern void _catchException14 (void); -__asm__ (".text"); -__asm__ (".globl _catchException14"); -__asm__ ("_catchException14:"); -CHECK_FAULT (); -SAVE_REGISTERS1 (); -SAVE_ERRCODE (); -SAVE_REGISTERS2 (); -__asm__ ("pushl $14"); -CALL_HOOK (); - -/* - * remcomHandler is a front end for handle_exception. It moves the - * stack pointer into an area reserved for debugger use. - */ -extern void remcomHandler (void); -__asm__ ("_remcomHandler:"); -__asm__ (" popl %eax"); /* pop off return address */ -__asm__ (" popl %eax"); /* get the exception number */ -__asm__ (" movl i386_gdb_stackPtr, %esp"); /* move to remcom stack area */ -__asm__ (" pushl %eax"); /* push exception onto stack */ -__asm__ (" call handle_exception"); /* this never returns */ - -void -_returnFromException (void) -{ - return_to_prog (); -} - -static int -hex (char ch) -{ - if ((ch >= 'a') && (ch <= 'f')) - return (ch - 'a' + 10); - if ((ch >= '0') && (ch <= '9')) - return (ch - '0'); - if ((ch >= 'A') && (ch <= 'F')) - return (ch - 'A' + 10); - return (-1); -} - -/* scan for the sequence $# */ -static void -getpacket (char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - int i; - int count; - char ch; - - do - { - /* wait around for the start character, ignore all other characters */ - while ((ch = (getDebugChar () & 0x7f)) != '$'); - checksum = 0; - xmitcsum = -1; - - count = 0; - - /* now, read until a # or end of buffer is found */ - while (count < BUFMAX) - { - ch = getDebugChar () & 0x7f; - if (ch == '#') - break; - checksum = checksum + ch; - buffer[count] = ch; - count = count + 1; - } - buffer[count] = 0; - - if (ch == '#') - { - xmitcsum = hex (getDebugChar () & 0x7f) << 4; - xmitcsum += hex (getDebugChar () & 0x7f); - if ((remote_debug) && (checksum != xmitcsum)) - { - printk ("bad checksum. My count = 0x%x, sent=0x%x. buf=%s\n", - checksum, xmitcsum, buffer); - } - - if (remote_debug) { - printk("GETP: $%s...%s\n", buffer, - checksum == xmitcsum ? "Ack" : "Nack"); - } - - if (checksum != xmitcsum) - putDebugChar ('-'); /* failed checksum */ - else - { - putDebugChar ('+'); /* successful transfer */ - /* if a sequence char is present, reply the sequence ID */ - if (buffer[2] == ':') - { - putDebugChar (buffer[0]); - putDebugChar (buffer[1]); - /* remove sequence chars from buffer */ - count = strlen (buffer); - for (i = 3; i <= count; i++) - buffer[i - 3] = buffer[i]; - } - } - } - } - while (checksum != xmitcsum); - -} - -/* send the packet in buffer. */ - -static void -putpacket (char *buffer) -{ - /* $#. */ - while (true) - { - unsigned char checksum; - int count; - char ch; - - if (remote_debug) - printk("PUTP: $%s", buffer); - - putDebugChar ('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count])) - { - if (!putDebugChar (ch)) - return; - checksum += ch; - count += 1; - } - - putDebugChar ('#'); - putDebugChar (hexchars[checksum >> 4]); - putDebugChar (hexchars[checksum % 16]); - - if (remote_debug) - printk("#%c%c...", hexchars[checksum >> 4], hexchars[checksum % 16]); - - ch = getDebugChar () & 0x7f; - if (ch == '+') { - if (remote_debug) - printk("Ack\n"); - break; - } - if (remote_debug) - printk("Nack(%c)\n", ch); - } -} - -char remcomInBuffer[BUFMAX]; -char remcomOutBuffer[BUFMAX]; -static short error; - -static void -debug_error ( - char *format, - char *parm -) -{ - if (remote_debug) - printk (format, parm); -} - -/* Address of a routine to RTE to if we get a memory fault. */ -static void (*volatile mem_fault_routine) (void) = NULL; - -/* Indicate to caller of mem2hex or hex2mem that there has been an - error. */ -static volatile int mem_err = 0; - -void -set_mem_err (void) -{ - mem_err = 1; -} - -/* These are separate functions so that they are so short and sweet - that the compiler won't save any registers (if there is a fault - to mem_fault, they won't get restored, so there better not be any - saved). */ -static int -get_char (char *addr) -{ - return *addr; -} - -static void -set_char (char *addr, int val) -{ - *addr = val; -} - -/* convert the memory pointed to by mem into hex, placing result in buf */ -/* return a pointer to the last char put in buf (null) */ -/* If MAY_FAULT is non-zero, then we should set mem_err in response to - a fault; if zero treat a fault like any other fault in the stub. */ -static char * -mem2hex (char *mem, char *buf, int count, int may_fault) -{ - int i; - unsigned char ch; - - if (may_fault) - mem_fault_routine = set_mem_err; - for (i = 0; i < count; i++) - { - ch = get_char (mem++); - if (may_fault && mem_err) - return (buf); - *buf++ = hexchars[ch >> 4]; - *buf++ = hexchars[ch % 16]; - } - *buf = 0; - if (may_fault) - mem_fault_routine = NULL; - return (buf); -} - -/* convert the hex array pointed to by buf into binary to be placed in mem */ -/* return a pointer to the character AFTER the last byte written */ -static char * -hex2mem (char *buf, char *mem, int count, int may_fault) -{ - int i; - unsigned char ch; - - if (may_fault) - mem_fault_routine = set_mem_err; - for (i = 0; i < count; i++) - { - ch = hex (*buf++) << 4; - ch = ch + hex (*buf++); - set_char (mem++, ch); - if (may_fault && mem_err) - return (mem); - } - if (may_fault) - mem_fault_routine = NULL; - return (mem); -} - -/* this function takes the 386 exception vector and attempts to - translate this number into a unix compatible signal value */ -static int -computeSignal (int exceptionVector) -{ - int sigval; - switch (exceptionVector) - { - case 0: - sigval = 8; - break; /* divide by zero */ - case 1: - sigval = 5; - break; /* debug exception */ - case 3: - sigval = 5; - break; /* breakpoint */ - case 4: - sigval = 16; - break; /* into instruction (overflow) */ - case 5: - sigval = 16; - break; /* bound instruction */ - case 6: - sigval = 4; - break; /* Invalid opcode */ - case 7: - sigval = 8; - break; /* coprocessor not available */ - case 8: - sigval = 7; - break; /* double fault */ - case 9: - sigval = 11; - break; /* coprocessor segment overrun */ - case 10: - sigval = 11; - break; /* Invalid TSS */ - case 11: - sigval = 11; - break; /* Segment not present */ - case 12: - sigval = 11; - break; /* stack exception */ - case 13: - sigval = 11; - break; /* general protection */ - case 14: - sigval = 11; - break; /* page fault */ - case 16: - sigval = 7; - break; /* coprocessor error */ - default: - sigval = 7; /* "software generated" */ - } - return (sigval); -} - -/**********************************************/ -/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */ -/* RETURN NUMBER OF CHARS PROCESSED */ -/**********************************************/ -static int -hexToInt (char **ptr, int *intValue) -{ - int numChars = 0; - int hexValue; - - *intValue = 0; - - while (**ptr) - { - hexValue = hex (**ptr); - if (hexValue >= 0) - { - *intValue = (*intValue << 4) | hexValue; - numChars++; - } - else - break; - - (*ptr)++; - } - - return (numChars); -} - -/* - * Get/Set the DR registers. - */ -static uint32_t getDR7(void) -{ - uint32_t value = 0; - asm volatile (" movl %%dr7, %0;" : "=r" (value) : : ); - return value; -} - -static void setDR7(uint32_t value) -{ - asm volatile (" movl %0, %%dr7;" : : "r" (value) : ); -} - -static uint32_t getDR(int reg) -{ - uint32_t value = 0; - switch (reg) - { - case 0: - asm volatile (" movl %%dr0, %0;" : "=r" (value) : : ); - break; - case 1: - asm volatile (" movl %%dr1, %0;" : "=r" (value) : : ); - break; - case 2: - asm volatile (" movl %%dr2, %0;" : "=r" (value) : : ); - break; - case 3: - asm volatile (" movl %%dr3, %0;" : "=r" (value) : : ); - break; - default: - break; - } - return value; -} - -static void setDR(int reg, uint32_t addr) -{ - switch (reg) - { - case 0: - asm volatile (" movl %0, %%dr0;" : : "r" (addr) : ); - break; - case 1: - asm volatile (" movl %0, %%dr1;" : : "r" (addr) : ); - break; - case 2: - asm volatile (" movl %0, %%dr2;" : : "r" (addr) : ); - break; - case 3: - asm volatile (" movl %0, %%dr3;" : : "r" (addr) : ); - break; - default: - break; - } -} - -/* - * This function does all command procesing for interfacing to gdb. - * - * NOTE: This method is called from assembly code so must be marked - * as used. - */ -static void handle_exception (int exceptionVector) __attribute__((used)); -static void -handle_exception (int exceptionVector) -{ - int sigval; - int addr, length, reg; - char *ptr; - - gdb_i386vector = exceptionVector; - - if (remote_debug) - printk ("GDB: EXECPTION: vector=%d, sr=0x%x, pc=0x%x\n", - exceptionVector, - i386_gdb_registers[PS], - i386_gdb_registers[PC]); - - /* Reply to host that an exception has occurred. Always return the - PC, SP, and FP, since gdb always wants them. */ - ptr = remcomOutBuffer; - *ptr++ = 'T'; - sigval = computeSignal (exceptionVector); - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval % 16]; - - *ptr++ = hexchars[ESP]; - *ptr++ = ':'; - mem2hex ((char *) &i386_gdb_registers[ESP], ptr, REGBYTES, 0); - ptr += REGBYTES * 2; - *ptr++ = ';'; - - *ptr++ = hexchars[EBP]; - *ptr++ = ':'; - mem2hex ((char *) &i386_gdb_registers[EBP], ptr, REGBYTES, 0); - ptr += REGBYTES * 2; - *ptr++ = ';'; - - *ptr++ = hexchars[PC]; - *ptr++ = ':'; - mem2hex ((char *) &i386_gdb_registers[PC], ptr, REGBYTES, 0); - ptr += REGBYTES * 2; - *ptr++ = ';'; - - *ptr = '\0'; - - if (gdb_connected) - putpacket (remcomOutBuffer); - - while (1 == 1) - { - error = 0; - remcomOutBuffer[0] = 0; - getpacket (remcomInBuffer); - gdb_connected = 1; - switch (remcomInBuffer[0]) - { - case '?': - remcomOutBuffer[0] = 'S'; - remcomOutBuffer[1] = hexchars[sigval >> 4]; - remcomOutBuffer[2] = hexchars[sigval % 16]; - remcomOutBuffer[3] = 0; - break; - case 'd': /* remove */ - remote_debug = !(remote_debug); /* toggle debug flag */ - break; - case 'g': /* return the value of the CPU registers */ - mem2hex ((char *) i386_gdb_registers, remcomOutBuffer, NUMREGBYTES, 0); - break; - case 'G': /* set the value of the CPU registers - return OK */ - hex2mem (&remcomInBuffer[1], (char *) i386_gdb_registers, NUMREGBYTES, 0); - strcpy (remcomOutBuffer, "OK"); - break; - - case 'P': /* Set specific register */ - ptr = &remcomInBuffer[1]; - if (hexToInt (&ptr, ®) - && *ptr++ == '=') - { - hex2mem (ptr, (char *) &i386_gdb_registers[reg], REGBYTES, 0); - strcpy (remcomOutBuffer, "OK"); - } - else - { - strcpy (remcomOutBuffer, "E01"); - debug_error ("malformed register set command; %s", - remcomInBuffer); - } - break; - - /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ - case 'm': - /* TRY TO READ %x,%x. IF SUCCEED, SET PTR = 0 */ - ptr = &remcomInBuffer[1]; - if (hexToInt (&ptr, &addr)) - if (*(ptr++) == ',') - if (hexToInt (&ptr, &length)) - { - ptr = 0; - mem_err = 0; - mem2hex ((char *) addr, remcomOutBuffer, length, 1); - if (mem_err) - { - strcpy (remcomOutBuffer, "E03"); - debug_error ("memory fault", 0); - } - } - - if (ptr) - { - strcpy (remcomOutBuffer, "E01"); - debug_error ("malformed read memory command: %s", remcomInBuffer); - } - break; - - /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */ - case 'M': - /* TRY TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */ - ptr = &remcomInBuffer[1]; - if (hexToInt (&ptr, &addr)) - if (*(ptr++) == ',') - if (hexToInt (&ptr, &length)) - if (*(ptr++) == ':') - { - mem_err = 0; - hex2mem (ptr, (char *) addr, length, 1); - - if (mem_err) - { - strcpy (remcomOutBuffer, "E03"); - debug_error ("memory fault", 0); - } - else - { - strcpy (remcomOutBuffer, "OK"); - } - - ptr = 0; - } - if (ptr) - { - strcpy (remcomOutBuffer, "E02"); - debug_error ("malformed write memory command: %s", remcomInBuffer); - } - break; - - /* cAA..AA Continue at address AA..AA(optional) */ - /* sAA..AA Step one instruction from AA..AA(optional) */ - case 'c': - case 's': - /* try to read optional parameter, pc unchanged if no parm */ - ptr = &remcomInBuffer[1]; - if (hexToInt (&ptr, &addr)) - i386_gdb_registers[PC] = addr; - - /* clear the trace bit */ - i386_gdb_registers[PS] &= 0xfffffeff; - - /* set the trace bit if we're stepping */ - if (remcomInBuffer[0] == 's') - i386_gdb_registers[PS] |= 0x100; - - _returnFromException (); /* this is a jump */ - break; - - case 'Z': - case 'z': - /* - * Z1 = execute (00b) - * Z2 = write (01b) - * Z3 = read (??, need to use 11b)) - * Z4 = read/write (11b) - */ - ptr = &remcomInBuffer[1]; - reg = *(ptr++); - if (reg == '0') - break; - printk("hbreak\n"); - switch ((char) reg) - { - case '1': - reg = 0; - break; - case '2': - reg = 1; - case '3': - case '4': - default: - reg = 3; - break; - } - if (*(ptr++) == ',') - { - bool insert = remcomInBuffer[0] == 'Z'; - if (hexToInt (&ptr, &addr)) - { - if (*(ptr++) == ',') - { - uint32_t dr7; - int i; - hexToInt(&ptr, &length); - dr7 = getDR7(); - for (i = 0; i < NUM_DEBUG_REGISTERS; ++i) - { - if ((dr7 & (2 << (i * 2))) == 0) - { - if (insert) - { - setDR(i, addr); - dr7 |= - ((length - 1) << ((i * 2) + 18)) | - (reg << ((i * 2) + 16)) | - (2 << (i * 2)); - setDR7(dr7); - printk("set DR%i to %08x\n", i, addr); - break; - } - } - else if (!insert) - { - uint32_t dra = getDR(i); - if (dra == addr) - { - dr7 &= ~(2 << (i * 2)); - setDR7(dr7); - printk("clear DR%i\n", i); - break; - } - } - } - if (insert && (i == NUM_DEBUG_REGISTERS)) - { - ptr = 0; - } - } - else - { - ptr = 0; - } - } - else - { - ptr = 0; - } - } - else - { - ptr = 0; - } - - if (ptr) - strcpy (remcomOutBuffer, "OK"); - else - strcpy (remcomOutBuffer, "E1"); - break; - - /* Detach. */ - case 'D': - putpacket (remcomOutBuffer); - i386_gdb_registers[PS] &= 0xfffffeff; - _returnFromException (); /* this is a jump */ - break; - - /* kill the program */ - case 'k': /* do nothing */ - bsp_reset(); - continue; - - default: - break; - } /* switch */ - - /* reply to the request */ - putpacket (remcomOutBuffer); - } -} - -/* this function is used to set up exception handlers for tracing and - breakpoints */ -void -set_debug_traps (void) -{ - i386_gdb_stackPtr = &i386_gdb_remcomStack[STACKSIZE / sizeof (int) - 1]; - - exceptionHandler (0, _catchException0); - exceptionHandler (1, _catchException1); - exceptionHandler (3, _catchException3); - exceptionHandler (4, _catchException4); - exceptionHandler (5, _catchException5); - exceptionHandler (6, _catchException6); - exceptionHandler (7, _catchException7); - exceptionHandler (8, _catchException8); - exceptionHandler (9, _catchException9); - exceptionHandler (10, _catchException10); - exceptionHandler (11, _catchException11); - exceptionHandler (12, _catchException12); - exceptionHandler (13, _catchException13); - exceptionHandler (14, _catchException14); - exceptionHandler (16, _catchException16); - - /* In case GDB is started before us, ack any packets (presumably - "$?#xx") sitting there. */ - putDebugChar ('+'); - - initialized = true; - -} - -/* This function will generate a breakpoint exception. It is used at the - beginning of a program to sync up with a debugger and can be used - otherwise as a quick means to stop program execution and "break" into - the debugger. */ - -void -breakpoint (void) -{ - if (initialized) - { - BREAKPOINT (); - } - waitabit (); -} - -int waitlimit = 1000000; - -void -waitabit (void) -{ - int i; - for (i = 0; i < waitlimit; i++); -} diff --git a/c/src/lib/libbsp/i386/shared/comm/tty_drv.c b/c/src/lib/libbsp/i386/shared/comm/tty_drv.c deleted file mode 100644 index 121820061a..0000000000 --- a/c/src/lib/libbsp/i386/shared/comm/tty_drv.c +++ /dev/null @@ -1,413 +0,0 @@ -/*************************************************************************** - * - * MODULE DESCRIPTION: - * This module implements the RTEMS drivers for the PC serial ports - * as /dev/ttyS1 for COM1 and /dev/ttyS2 as COM2. If one of the ports - * is used as the console, this driver would fail to initialize. - * - * This code was based on the console driver. It is based on the - * current termios framework. This is just a shell around the - * termios support. - * - * by: Rosimildo da Silva: - * rdasilva@connecttel.com - * http://www.connecttel.com - * - ****************************************************************************/ - - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int BSP_poll_read(int); - -/* Internal routines */ -static int tty1_conSetAttr( int minor, const struct termios *t); -static int tty2_conSetAttr( int minor, const struct termios *t); - -extern BSP_polling_getchar_function_type BSP_poll_char; -extern int BSPConsolePort; -extern void rtems_set_waiting_id_comx( int port, rtems_id id, rtems_event_set event ); - -/* - * TTYS1 - device driver INITIALIZE entry point. - */ -rtems_device_driver -tty1_initialize(rtems_device_major_number major, - rtems_device_minor_number minor, - void *arg) -{ - rtems_status_code status; - - /* Check if this port is not been used as console */ - if( BSPConsolePort == BSP_UART_COM1 ) - { - status = -1; - printk("TTYS1: port selected as console.\n"); - rtems_fatal_error_occurred( status ); - } - - /* - * Set up TERMIOS - */ - rtems_termios_initialize(); - - /* - * Do device-specific initialization - */ - /* 9600-8-N-1, without hardware flow control */ - BSP_uart_init( BSP_UART_COM1, 9600, CHR_8_BITS, 0, 0, 0 ); - status = rtems_interrupt_handler_install( - BSP_UART_COM1_IRQ, - "tty_drv", - RTEMS_INTERRUPT_UNIQUE, - BSP_uart_termios_isr_com1, - NULL - ); - assert(status == RTEMS_SUCCESSFUL); - /* - * Register the device - */ - status = rtems_io_register_name ("/dev/ttyS1", major, 0); - if (status != RTEMS_SUCCESSFUL) - { - printk("Error registering ttyS1 device!\n"); - rtems_fatal_error_occurred (status); - } - printk("Device: /dev/ttyS1 initialized.\n"); - return RTEMS_SUCCESSFUL; -} /* tty_initialize */ - -static int tty1_last_close(int major, int minor, void *arg) -{ - rtems_status_code status; - - status = rtems_interrupt_handler_remove( - BSP_UART_COM1_IRQ, - BSP_uart_termios_isr_com1, - NULL - ); - assert(status == RTEMS_SUCCESSFUL); - return 0; -} - -/* - * TTY1 - device driver OPEN entry point - */ -rtems_device_driver -tty1_open(rtems_device_major_number major, - rtems_device_minor_number minor, - void *arg) -{ - rtems_status_code status; -#ifndef USE_TASK_DRIVEN - static rtems_termios_callbacks cb = - { - NULL, /* firstOpen */ - tty1_last_close, /* lastClose */ - NULL, /* poll read */ - BSP_uart_termios_write_com1, /* write */ - tty1_conSetAttr, /* setAttributes */ - NULL, /* stopRemoteTx */ - NULL, /* startRemoteTx */ - TERMIOS_IRQ_DRIVEN /* outputUsesInterrupts */ - }; -#else - static rtems_termios_callbacks cb = - { - NULL, /* firstOpen */ - NULL, /* lastClose */ - BSP_uart_termios_read_com1, /* poll read */ - BSP_uart_termios_write_com1, /* write */ - tty1_conSetAttr, /* setAttributes */ - NULL, /* stopRemoteTx */ - NULL, /* startRemoteTx */ - TERMIOS_TASK_DRIVEN /* outputUsesInterrupts */ - }; -#endif - - status = rtems_termios_open( major, minor, arg, &cb ); - if(status != RTEMS_SUCCESSFUL) - { - printk("Error openning tty1 device\n"); - return status; - } - - /* - * Pass data area info down to driver - */ - BSP_uart_termios_set( BSP_UART_COM1, - ((rtems_libio_open_close_args_t *)arg)->iop->data1 ); - /* Enable interrupts on channel */ - BSP_uart_intr_ctrl( BSP_UART_COM1, BSP_UART_INTR_CTRL_TERMIOS); - return RTEMS_SUCCESSFUL; -} - -/* - * TTY - device driver CLOSE entry point - */ -rtems_device_driver -tty_close(rtems_device_major_number major, - rtems_device_minor_number minor, - void *arg) -{ - - return (rtems_termios_close (arg)); - -} /* tty_close */ - -/* - * TTY device driver READ entry point. - * Read characters from the tty device. - */ -rtems_device_driver -tty_read(rtems_device_major_number major, - rtems_device_minor_number minor, - void *arg) -{ - return rtems_termios_read (arg); -} /* tty_read */ - -/* - * TTY device driver WRITE entry point. - * Write characters to the tty device. - */ -rtems_device_driver -tty_write(rtems_device_major_number major, - rtems_device_minor_number minor, - void * arg) -{ - return rtems_termios_write (arg); - -} /* tty_write */ - -/* - * Handle ioctl request. This is a generic internal - * routine to handle both devices. - */ -static rtems_device_driver tty_control( int port, void *arg ) -{ - rtems_libio_ioctl_args_t *args = arg; - switch( args->command ) - { - default: - return rtems_termios_ioctl (arg); - break; - } - args->ioctl_return = 0; - return RTEMS_SUCCESSFUL; -} - -/* - * Handle ioctl request for ttyS1. - */ -rtems_device_driver -tty1_control(rtems_device_major_number major, - rtems_device_minor_number minor, - void * arg -) -{ - return tty_control( BSP_UART_COM1, arg ); -} - -static int -conSetAttr(int port, int minor, const struct termios *t) -{ - unsigned long baud, databits, parity, stopbits; - - baud = rtems_termios_baud_to_number(t->c_ospeed); - if ( baud > 115200 ) - rtems_fatal_error_occurred (RTEMS_INTERNAL_ERROR); - - if (t->c_cflag & PARENB) { - /* Parity is enabled */ - if (t->c_cflag & PARODD) { - /* Parity is odd */ - parity = PEN; - } - else { - /* Parity is even */ - parity = PEN | EPS; - } - } - else { - /* No parity */ - parity = 0; - } - - switch (t->c_cflag & CSIZE) { - case CS5: databits = CHR_5_BITS; break; - case CS6: databits = CHR_6_BITS; break; - case CS7: databits = CHR_7_BITS; break; - default: /* just to avoid warnings -- all cases are covered */ - case CS8: databits = CHR_8_BITS; break; - } - - if (t->c_cflag & CSTOPB) { - /* 2 stop bits */ - stopbits = STB; - } - else { - /* 1 stop bit */ - stopbits = 0; - } - - printk("Setting attributes, port=%X, baud=%" PRId32 ", linemode = 0x%02" PRIx32 "\n", - port, baud, databits | parity | stopbits ); - BSP_uart_set_attributes(port, baud, databits, parity, stopbits); - return 0; -} - -/* - * Handle ioctl request for ttyS2. - */ -static int -tty1_conSetAttr( int minor, const struct termios *t) -{ - return conSetAttr( BSP_UART_COM1, minor, t ); -} - -/* - * TTY2 device driver INITIALIZE entry point. - */ -rtems_device_driver -tty2_initialize(rtems_device_major_number major, - rtems_device_minor_number minor, - void *arg) -{ - rtems_status_code status; - - /* Check if this port is not been used as console */ - if( BSPConsolePort == BSP_UART_COM2 ) - { - status = -1; - printk("TTY2: port selected as console.\n"); - rtems_fatal_error_occurred( status ); - } - - /* - * Set up TERMIOS - */ - rtems_termios_initialize(); - - /* - * Do device-specific initialization - */ - /* 9600-8-N-1, without hardware flow control */ - BSP_uart_init( BSP_UART_COM2, 9600, CHR_8_BITS, 0, 0, 0); - status = rtems_interrupt_handler_install( - BSP_UART_COM2_IRQ, - "tty_drv", - RTEMS_INTERRUPT_UNIQUE, - BSP_uart_termios_isr_com2, - NULL - ); - assert(status == RTEMS_SUCCESSFUL); - - /* - * Register the device - */ - status = rtems_io_register_name ("/dev/ttyS2", major, 0); - if (status != RTEMS_SUCCESSFUL) - { - printk("Error registering tty2 device!\n"); - rtems_fatal_error_occurred (status); - } - printk("Device: /dev/ttyS2 initialized.\n"); - return RTEMS_SUCCESSFUL; -} /* tty_initialize */ - -static int tty2_last_close(int major, int minor, void *arg) -{ - rtems_status_code status; - - status = rtems_interrupt_handler_remove( - BSP_UART_COM2_IRQ, - BSP_uart_termios_isr_com2, - NULL - ); - assert(status == RTEMS_SUCCESSFUL); - return 0; -} - -/* - * TTY2 device driver OPEN entry point - */ -rtems_device_driver -tty2_open(rtems_device_major_number major, - rtems_device_minor_number minor, - void *arg) -{ - rtems_status_code status; -#ifndef USE_TASK_DRIVEN - static rtems_termios_callbacks cb = - { - NULL, /* firstOpen */ - tty2_last_close, /* lastClose */ - NULL, /* poll read */ - BSP_uart_termios_write_com2, /* write */ - tty2_conSetAttr, /* setAttributes */ - NULL, /* stopRemoteTx */ - NULL, /* startRemoteTx */ - TERMIOS_IRQ_DRIVEN /* outputUsesInterrupts */ - }; -#else - static rtems_termios_callbacks cb = - { - NULL, /* firstOpen */ - NULL, /* lastClose */ - BSP_uart_termios_read_com2, /* poll read */ - BSP_uart_termios_write_com2, /* write */ - tty2_conSetAttr, /* setAttributes */ - NULL, /* stopRemoteTx */ - NULL, /* startRemoteTx */ - TERMIOS_TASK_DRIVEN /* outputUsesInterrupts */ - }; -#endif - - status = rtems_termios_open (major, minor, arg, &cb); - if(status != RTEMS_SUCCESSFUL) - { - printk("Error openning tty1 device\n"); - return status; - } - - /* - * Pass data area info down to driver - */ - BSP_uart_termios_set( BSP_UART_COM2, - ((rtems_libio_open_close_args_t *)arg)->iop->data1 ); - /* Enable interrupts on channel */ - BSP_uart_intr_ctrl( BSP_UART_COM2, BSP_UART_INTR_CTRL_TERMIOS); - return RTEMS_SUCCESSFUL; -} - -/* - * Handle ioctl request for TTY2 - */ -rtems_device_driver -tty2_control(rtems_device_major_number major, - rtems_device_minor_number minor, - void * arg -) -{ - return tty_control( BSP_UART_COM2, arg ); -} - -static int -tty2_conSetAttr( int minor, const struct termios *t) -{ - return conSetAttr( BSP_UART_COM2, minor, t ); -} diff --git a/c/src/lib/libbsp/i386/shared/comm/uart.c b/c/src/lib/libbsp/i386/shared/comm/uart.c deleted file mode 100644 index 5d2dd64854..0000000000 --- a/c/src/lib/libbsp/i386/shared/comm/uart.c +++ /dev/null @@ -1,959 +0,0 @@ -/* - * This software is Copyright (C) 1998 by T.sqware - all rights limited - * It is provided in to the public domain "as is", can be freely modified - * as far as this copyight notice is kept unchanged, but does not imply - * an endorsement by T.sqware of the product in which it is included. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Basic 16552 driver - */ - -struct uart_data -{ - int ioMode; - int hwFlow; - unsigned int ier; - unsigned long baud; - unsigned long databits; - unsigned long parity; - unsigned long stopbits; -}; - -static struct uart_data uart_data[2]; - -/* - * Macros to read/write register of uart, if configuration is - * different just rewrite these macros - */ - -static inline unsigned char -uread(int uart, unsigned int reg) -{ - register unsigned char val; - - if (uart == 0) { - inport_byte(COM1_BASE_IO+reg, val); - } else { - inport_byte(COM2_BASE_IO+reg, val); - } - - return val; -} - -static inline void -uwrite(int uart, int reg, unsigned int val) -{ - if (uart == 0) { - outport_byte(COM1_BASE_IO+reg, val); - } else { - outport_byte(COM2_BASE_IO+reg, val); - } -} - -static void -uartError(int uart) -{ - unsigned char uartStatus, dummy; - - uartStatus = uread(uart, LSR); - (void) uartStatus; /* avoid set but not used warning */ - dummy = uread(uart, RBR); - (void) dummy; /* avoid set but not used warning */ - -#ifdef UARTDEBUG - if (uartStatus & OE) - printk("********* Over run Error **********\n"); - if (uartStatus & PE) - printk("********* Parity Error **********\n"); - if (uartStatus & FE) - printk("********* Framing Error **********\n"); - if (uartStatus & BI) - printk("********* Parity Error **********\n"); - if (uartStatus & ERFIFO) - printk("********* Error receive Fifo **********\n"); -#endif -} - -/* - * Uart initialization, it is hardcoded to 8 bit, no parity, - * one stop bit, FIFO, things to be changed - * are baud rate and nad hw flow control, - * and longest rx fifo setting - */ -void -BSP_uart_init -( - int uart, - unsigned long baud, - unsigned long databits, - unsigned long parity, - unsigned long stopbits, - int hwFlow -) -{ - /* Sanity check */ - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - switch(baud) - { - case 50: - case 75: - case 110: - case 134: - case 300: - case 600: - case 1200: - case 2400: - case 9600: - case 19200: - case 38400: - case 57600: - case 115200: - break; - default: - assert(0); - return; - } - - /* Set DLAB bit to 1 */ - uwrite(uart, LCR, DLAB); - - /* Set baud rate */ - uwrite(uart, DLL, (BSPBaseBaud/baud) & 0xff); - uwrite(uart, DLM, ((BSPBaseBaud/baud) >> 8) & 0xff); - - /* 8-bit, no parity , 1 stop */ - uwrite(uart, LCR, databits | parity | stopbits); - - /* Set DTR, RTS and OUT2 high */ - uwrite(uart, MCR, DTR | RTS | OUT_2); - - /* Enable FIFO */ - uwrite(uart, FCR, FIFO_EN | XMIT_RESET | RCV_RESET | RECEIVE_FIFO_TRIGGER12); - - /* Disable Interrupts */ - uwrite(uart, IER, 0); - - /* Read status to clear them */ - uread(uart, LSR); - uread(uart, RBR); - uread(uart, MSR); - - /* Remember state */ - uart_data[uart].baud = baud; - uart_data[uart].databits = databits; - uart_data[uart].parity = parity; - uart_data[uart].stopbits = stopbits; - uart_data[uart].hwFlow = hwFlow; - return; -} - -/* - * Set baud - */ - -void -BSP_uart_set_baud( - int uart, - unsigned long baud -) -{ - /* Sanity check */ - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - BSP_uart_set_attributes( uart, baud, uart_data[uart].databits, - uart_data[uart].parity, uart_data[uart].stopbits ); -} - -/* - * Set all attributes - */ - -void -BSP_uart_set_attributes -( - int uart, - unsigned long baud, - unsigned long databits, - unsigned long parity, - unsigned long stopbits -) -{ - unsigned char mcr, ier; - - /* Sanity check */ - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - /* - * This function may be called whenever TERMIOS parameters - * are changed, so we have to make sure that baud change is - * indeed required - */ - - if( (baud == uart_data[uart].baud) && - (databits == uart_data[uart].databits) && - (parity == uart_data[uart].parity) && - (stopbits == uart_data[uart].stopbits) ) - { - return; - } - - mcr = uread(uart, MCR); - ier = uread(uart, IER); - - BSP_uart_init(uart, baud, databits, parity, stopbits, uart_data[uart].hwFlow); - - uwrite(uart, MCR, mcr); - uwrite(uart, IER, ier); - - return; -} - -/* - * Enable/disable interrupts - */ -void -BSP_uart_intr_ctrl(int uart, int cmd) -{ - int iStatus = (int)INTERRUPT_DISABLE; - - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - switch(cmd) - { - case BSP_UART_INTR_CTRL_ENABLE: - iStatus |= (RECEIVE_ENABLE | RECEIVER_LINE_ST_ENABLE | TRANSMIT_ENABLE); - if ( uart_data[uart].hwFlow ) { - iStatus |= MODEM_ENABLE; - } - break; - case BSP_UART_INTR_CTRL_TERMIOS: - iStatus |= (RECEIVE_ENABLE | RECEIVER_LINE_ST_ENABLE); - if ( uart_data[uart].hwFlow ) { - iStatus |= MODEM_ENABLE; - } - break; - case BSP_UART_INTR_CTRL_GDB: - iStatus |= RECEIVE_ENABLE; - break; - } - - uart_data[uart].ier = iStatus; - uwrite(uart, IER, iStatus); - - return; -} - -void -BSP_uart_throttle(int uart) -{ - unsigned int mcr; - - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - if(!uart_data[uart].hwFlow) - { - /* Should not happen */ - assert(0); - return; - } - mcr = uread (uart, MCR); - /* RTS down */ - mcr &= ~RTS; - uwrite(uart, MCR, mcr); - - return; -} - -void -BSP_uart_unthrottle(int uart) -{ - unsigned int mcr; - - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - if(!uart_data[uart].hwFlow) - { - /* Should not happen */ - assert(0); - return; - } - mcr = uread (uart, MCR); - /* RTS up */ - mcr |= RTS; - uwrite(uart, MCR, mcr); - - return; -} - -/* - * Status function, -1 if error - * detected, 0 if no received chars available, - * 1 if received char available, 2 if break - * is detected, it will eat break and error - * chars. It ignores overruns - we cannot do - * anything about - it execpt count statistics - * and we are not counting it. - */ -int -BSP_uart_polled_status(int uart) -{ - unsigned char val; - - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - val = uread(uart, LSR); - - if(val & BI) - { - /* BREAK found, eat character */ - uread(uart, RBR); - return BSP_UART_STATUS_BREAK; - } - - if((val & (DR | OE | FE)) == 1) - { - /* No error, character present */ - return BSP_UART_STATUS_CHAR; - } - - if((val & (DR | OE | FE)) == 0) - { - /* Nothing */ - return BSP_UART_STATUS_NOCHAR; - } - - /* - * Framing or parity error - * eat character - */ - uread(uart, RBR); - - return BSP_UART_STATUS_ERROR; -} - -/* - * Polled mode write function - */ -void -BSP_uart_polled_write(int uart, int val) -{ - unsigned char val1; - - /* Sanity check */ - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - for(;;) - { - if((val1=uread(uart, LSR)) & THRE) - { - break; - } - } - - if(uart_data[uart].hwFlow) - { - for(;;) - { - if(uread(uart, MSR) & CTS) - { - break; - } - } - } - - uwrite(uart, THR, val & 0xff); - - /* - * Wait for character to be transmitted. - * This ensures that printk and printf play nicely together - * when using the same serial port. - * Yes, there's a performance hit here, but if we're doing - * polled writes to a serial port we're probably not that - * interested in efficiency anyway..... - */ - for(;;) - { - if((val1=uread(uart, LSR)) & THRE) - { - break; - } - } - - return; -} - -void -BSP_output_char_via_serial(char val) -{ - BSP_uart_polled_write(BSPConsolePort, val); -} - -/* - * Polled mode read function - */ -int -BSP_uart_polled_read(int uart) -{ - unsigned char val; - - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - for(;;) - { - if(uread(uart, LSR) & DR) - { - break; - } - } - - val = uread(uart, RBR); - - return (int)(val & 0xff); -} - -int -BSP_poll_char_via_serial(void) -{ - return BSP_uart_polled_read(BSPConsolePort); -} - -/* ================ Termios support =================*/ - -static volatile int termios_stopped_com1 = 0; -static volatile int termios_tx_active_com1 = 0; -static void* termios_ttyp_com1 = NULL; -static char termios_tx_hold_com1 = 0; -static volatile char termios_tx_hold_valid_com1 = 0; - -static volatile int termios_stopped_com2 = 0; -static volatile int termios_tx_active_com2 = 0; -static void* termios_ttyp_com2 = NULL; -static char termios_tx_hold_com2 = 0; -static volatile char termios_tx_hold_valid_com2 = 0; - -static void ( *driver_input_handler_com1 )( void *, char *, int ) = 0; -static void ( *driver_input_handler_com2 )( void *, char *, int ) = 0; - -/* - * Set channel parameters - */ -void -BSP_uart_termios_set(int uart, void *ttyp) -{ - struct rtems_termios_tty *p = (struct rtems_termios_tty *)ttyp; - unsigned char val; - assert(uart == BSP_UART_COM1 || uart == BSP_UART_COM2); - - if(uart == BSP_UART_COM1) - { - uart_data[uart].ioMode = p->device.outputUsesInterrupts; - if(uart_data[uart].hwFlow) - { - val = uread(uart, MSR); - - termios_stopped_com1 = (val & CTS) ? 0 : 1; - } - else - { - termios_stopped_com1 = 0; - } - termios_tx_active_com1 = 0; - termios_ttyp_com1 = ttyp; - termios_tx_hold_com1 = 0; - termios_tx_hold_valid_com1 = 0; - } - else - { - uart_data[uart].ioMode = p->device.outputUsesInterrupts; - if(uart_data[uart].hwFlow) - { - val = uread(uart, MSR); - - termios_stopped_com2 = (val & CTS) ? 0 : 1; - } - else - { - termios_stopped_com2 = 0; - } - termios_tx_active_com2 = 0; - termios_ttyp_com2 = ttyp; - termios_tx_hold_com2 = 0; - termios_tx_hold_valid_com2 = 0; - } - - return; -} - -int -BSP_uart_termios_read_com1(int uart) -{ - int off = (int)0; - char buf[40]; - - /* read bytes */ - while (( off < sizeof(buf) ) && ( uread(BSP_UART_COM1, LSR) & DR )) { - buf[off++] = uread(BSP_UART_COM1, RBR); - } - - /* write out data */ - if ( off > 0 ) { - rtems_termios_enqueue_raw_characters(termios_ttyp_com1, buf, off); - } - - /* enable receive interrupts */ - uart_data[BSP_UART_COM1].ier |= (RECEIVE_ENABLE | RECEIVER_LINE_ST_ENABLE); - uwrite(BSP_UART_COM1, IER, uart_data[BSP_UART_COM1].ier); - - return ( EOF ); -} - -int -BSP_uart_termios_read_com2(int uart) -{ - int off = (int)0; - char buf[40]; - - /* read current byte */ - while (( off < sizeof(buf) ) && ( uread(BSP_UART_COM2, LSR) & DR )) { - buf[off++] = uread(BSP_UART_COM2, RBR); - } - - /* write out data */ - if ( off > 0 ) { - rtems_termios_enqueue_raw_characters(termios_ttyp_com2, buf, off); - } - - /* enable receive interrupts */ - uart_data[BSP_UART_COM2].ier |= (RECEIVE_ENABLE | RECEIVER_LINE_ST_ENABLE); - uwrite(BSP_UART_COM2, IER, uart_data[BSP_UART_COM2].ier); - - return ( EOF ); -} - -ssize_t -BSP_uart_termios_write_com1(int minor, const char *buf, size_t len) -{ - if(len <= 0) - { - return 0; - } - - assert(buf != NULL); - - /* If there TX buffer is busy - something is royally screwed up */ - assert((uread(BSP_UART_COM1, LSR) & THRE) != 0); - - if(termios_stopped_com1) - { - /* CTS low */ - termios_tx_hold_com1 = *buf; - termios_tx_hold_valid_com1 = 1; - return 0; - } - - /* Write character */ - uwrite(BSP_UART_COM1, THR, *buf & 0xff); - - /* Enable interrupts if necessary */ - if ( !termios_tx_active_com1 ) { - termios_tx_active_com1 = 1; - uart_data[BSP_UART_COM1].ier |= TRANSMIT_ENABLE; - uwrite(BSP_UART_COM1, IER, uart_data[BSP_UART_COM1].ier); - } - - return 1; -} - -ssize_t -BSP_uart_termios_write_com2(int minor, const char *buf, size_t len) -{ - if(len <= 0) - { - return 0; - } - - assert(buf != NULL); - - /* If there TX buffer is busy - something is royally screwed up */ - assert((uread(BSP_UART_COM2, LSR) & THRE) != 0); - - if(termios_stopped_com2) - { - /* CTS low */ - termios_tx_hold_com2 = *buf; - termios_tx_hold_valid_com2 = 1; - return 0; - } - - /* Write character */ - uwrite(BSP_UART_COM2, THR, *buf & 0xff); - - /* Enable interrupts if necessary */ - if ( !termios_tx_active_com2 ) { - termios_tx_active_com2 = 1; - uart_data[BSP_UART_COM2].ier |= TRANSMIT_ENABLE; - uwrite(BSP_UART_COM2, IER, uart_data[BSP_UART_COM2].ier); - } - - return 1; -} - -void -BSP_uart_termios_isr_com1(void *ignored) -{ - unsigned char buf[40]; - unsigned char val; - int off, ret, vect; - - off = 0; - - for(;;) - { - vect = uread(BSP_UART_COM1, IIR) & 0xf; - - switch(vect) - { - case MODEM_STATUS : - val = uread(BSP_UART_COM1, MSR); - if(uart_data[BSP_UART_COM1].hwFlow) - { - if(val & CTS) - { - /* CTS high */ - termios_stopped_com1 = 0; - if(termios_tx_hold_valid_com1) - { - termios_tx_hold_valid_com1 = 0; - BSP_uart_termios_write_com1(0, &termios_tx_hold_com1, - 1); - } - } - else - { - /* CTS low */ - termios_stopped_com1 = 1; - } - } - break; - case NO_MORE_INTR : - /* No more interrupts */ - if(off != 0) - { - /* Update rx buffer */ - if( driver_input_handler_com1 ) - { - driver_input_handler_com1( termios_ttyp_com1, (char *)buf, off ); - } - else - { - /* Update rx buffer */ - rtems_termios_enqueue_raw_characters(termios_ttyp_com1, (char *)buf, off ); - } - } - return; - case TRANSMITTER_HODING_REGISTER_EMPTY : - /* - * TX holding empty: we have to disable these interrupts - * if there is nothing more to send. - */ - - /* If nothing else to send disable interrupts */ - ret = rtems_termios_dequeue_characters(termios_ttyp_com1, 1); - if ( ret == 0 ) { - termios_tx_active_com1 = 0; - uart_data[BSP_UART_COM1].ier &= ~(TRANSMIT_ENABLE); - uwrite(BSP_UART_COM1, IER, uart_data[BSP_UART_COM1].ier); - } - break; - case RECEIVER_DATA_AVAIL : - case CHARACTER_TIMEOUT_INDICATION: - if ( uart_data[BSP_UART_COM1].ioMode == TERMIOS_TASK_DRIVEN ) { - /* ensure interrupts are enabled */ - if ( uart_data[BSP_UART_COM1].ier & RECEIVE_ENABLE ) { - /* disable interrupts and notify termios */ - uart_data[BSP_UART_COM1].ier &= ~(RECEIVE_ENABLE | RECEIVER_LINE_ST_ENABLE); - uwrite(BSP_UART_COM1, IER, uart_data[BSP_UART_COM1].ier); - rtems_termios_rxirq_occured(termios_ttyp_com1); - } - } - else { - /* RX data ready */ - assert(off < sizeof(buf)); - buf[off++] = uread(BSP_UART_COM1, RBR); - } - break; - case RECEIVER_ERROR: - /* RX error: eat character */ - uartError(BSP_UART_COM1); - break; - default: - /* Should not happen */ - assert(0); - return; - } - } -} - -void -BSP_uart_termios_isr_com2(void *ignored) -{ - unsigned char buf[40]; - unsigned char val; - int off, ret, vect; - - off = 0; - - for(;;) - { - vect = uread(BSP_UART_COM2, IIR) & 0xf; - - switch(vect) - { - case MODEM_STATUS : - val = uread(BSP_UART_COM2, MSR); - if(uart_data[BSP_UART_COM2].hwFlow) - { - if(val & CTS) - { - /* CTS high */ - termios_stopped_com2 = 0; - if(termios_tx_hold_valid_com2) - { - termios_tx_hold_valid_com2 = 0; - BSP_uart_termios_write_com2(0, &termios_tx_hold_com2, - 1); - } - } - else - { - /* CTS low */ - termios_stopped_com2 = 1; - } - } - break; - case NO_MORE_INTR : - /* No more interrupts */ - if(off != 0) - { - /* Update rx buffer */ - if( driver_input_handler_com2 ) - { - driver_input_handler_com2( termios_ttyp_com2, (char *)buf, off ); - } - else - { - rtems_termios_enqueue_raw_characters(termios_ttyp_com2, (char *)buf, off); - } - } - return; - case TRANSMITTER_HODING_REGISTER_EMPTY : - /* - * TX holding empty: we have to disable these interrupts - * if there is nothing more to send. - */ - - /* If nothing else to send disable interrupts */ - ret = rtems_termios_dequeue_characters(termios_ttyp_com2, 1); - if ( ret == 0 ) { - termios_tx_active_com2 = 0; - uart_data[BSP_UART_COM2].ier &= ~(TRANSMIT_ENABLE); - uwrite(BSP_UART_COM2, IER, uart_data[BSP_UART_COM2].ier); - } - break; - case RECEIVER_DATA_AVAIL : - case CHARACTER_TIMEOUT_INDICATION: - if ( uart_data[BSP_UART_COM2].ioMode == TERMIOS_TASK_DRIVEN ) { - /* ensure interrupts are enabled */ - if ( uart_data[BSP_UART_COM2].ier & RECEIVE_ENABLE ) { - /* disable interrupts and notify termios */ - uart_data[BSP_UART_COM2].ier &= ~(RECEIVE_ENABLE | RECEIVER_LINE_ST_ENABLE); - uwrite(BSP_UART_COM2, IER, uart_data[BSP_UART_COM2].ier); - rtems_termios_rxirq_occured(termios_ttyp_com2); - } - } - else { - /* RX data ready */ - assert(off < sizeof(buf)); - buf[off++] = uread(BSP_UART_COM2, RBR); - } - break; - case RECEIVER_ERROR: - /* RX error: eat character */ - uartError(BSP_UART_COM2); - break; - default: - /* Should not happen */ - assert(0); - return; - } - } -} - -/* ================= GDB support ===================*/ -int BSP_uart_dbgisr_com_regsav[4] RTEMS_UNUSED; - -/* - * Interrupt service routine for COM1 - all, - * it does it check whether ^C is received - * if yes it will flip TF bit before returning - * Note: it should be installed as raw interrupt - * handler - */ - -__asm__ (".p2align 4"); -__asm__ (".text"); -__asm__ (".globl BSP_uart_dbgisr_com1"); -__asm__ ("BSP_uart_dbgisr_com1:"); -__asm__ (" movl %eax, BSP_uart_dbgisr_com_regsav"); /* Save eax */ -__asm__ (" movl %ebx, BSP_uart_dbgisr_com_regsav + 4"); /* Save ebx */ -__asm__ (" movl %edx, BSP_uart_dbgisr_com_regsav + 8"); /* Save edx */ - -__asm__ (" movl $0, %ebx"); /* Clear flag */ - -/* - * We know that only receive related interrupts - * are available, eat chars - */ -__asm__ ("uart_dbgisr_com1_1:"); -__asm__ (" movw $0x3FD, %dx"); -__asm__ (" inb %dx, %al"); /* Read LSR */ -__asm__ (" andb $1, %al"); -__asm__ (" cmpb $0, %al"); -__asm__ (" je uart_dbgisr_com1_2"); -__asm__ (" movw $0x3F8, %dx"); -__asm__ (" inb %dx, %al"); /* Get input character */ -__asm__ (" cmpb $3, %al"); -__asm__ (" jne uart_dbgisr_com1_1"); - -/* ^C received, set flag */ -__asm__ (" movl $1, %ebx"); -__asm__ (" jmp uart_dbgisr_com1_1"); - -/* All chars read */ -__asm__ ("uart_dbgisr_com1_2:"); - -/* If flag is set we have to tweak TF */ -__asm__ (" cmpl $0, %ebx"); -__asm__ (" je uart_dbgisr_com1_3"); - -/* Flag is set */ -__asm__ (" movl BSP_uart_dbgisr_com_regsav+4, %ebx"); /* Restore ebx */ -__asm__ (" movl BSP_uart_dbgisr_com_regsav+8, %edx"); /* Restore edx */ - -/* Set TF bit */ -__asm__ (" popl %eax"); /* Pop eip */ -__asm__ (" movl %eax, BSP_uart_dbgisr_com_regsav + 4"); /* Save it */ -__asm__ (" popl %eax"); /* Pop cs */ -__asm__ (" movl %eax, BSP_uart_dbgisr_com_regsav + 8"); /* Save it */ -__asm__ (" popl %eax"); /* Pop flags */ -__asm__ (" orl $0x100, %eax"); /* Modify it */ -__asm__ (" pushl %eax"); /* Push it back */ -__asm__ (" movl BSP_uart_dbgisr_com_regsav+8, %eax"); /* Put back cs */ -__asm__ (" pushl %eax"); -__asm__ (" movl BSP_uart_dbgisr_com_regsav+4, %eax"); /* Put back eip */ -__asm__ (" pushl %eax"); - -/* Acknowledge IRQ */ -__asm__ (" movb $0x20, %al"); -__asm__ (" outb %al, $0x20"); -__asm__ (" movl BSP_uart_dbgisr_com_regsav, %eax"); /* Restore eax */ -__asm__ (" iret"); /* Done */ - -/* Flag is not set */ -__asm__ ("uart_dbgisr_com1_3:"); -__asm__ (" movl BSP_uart_dbgisr_com_regsav+4, %ebx"); /* Restore ebx */ -__asm__ (" movl BSP_uart_dbgisr_com_regsav+8, %edx"); /* Restore edx */ - -/* Acknowledge irq */ -__asm__ (" movb $0x20, %al"); -__asm__ (" outb %al, $0x20"); -__asm__ (" movl BSP_uart_dbgisr_com_regsav, %eax"); /* Restore eax */ -__asm__ (" iret"); /* Done */ - -/* - * Interrupt service routine for COM2 - all, - * it does it check whether ^C is received - * if yes it will flip TF bit before returning - * Note: it has to be installed as raw interrupt - * handler - */ -__asm__ (".p2align 4"); -__asm__ (".text"); -__asm__ (".globl BSP_uart_dbgisr_com2"); -__asm__ ("BSP_uart_dbgisr_com2:"); -__asm__ (" movl %eax, BSP_uart_dbgisr_com_regsav"); /* Save eax */ -__asm__ (" movl %ebx, BSP_uart_dbgisr_com_regsav + 4"); /* Save ebx */ -__asm__ (" movl %edx, BSP_uart_dbgisr_com_regsav + 8"); /* Save edx */ - -__asm__ (" movl $0, %ebx"); /* Clear flag */ - -/* - * We know that only receive related interrupts - * are available, eat chars - */ -__asm__ ("uart_dbgisr_com2_1:"); -__asm__ (" movw $0x2FD, %dx"); -__asm__ (" inb %dx, %al"); /* Read LSR */ -__asm__ (" andb $1, %al"); -__asm__ (" cmpb $0, %al"); -__asm__ (" je uart_dbgisr_com2_2"); -__asm__ (" movw $0x2F8, %dx"); -__asm__ (" inb %dx, %al"); /* Get input character */ -__asm__ (" cmpb $3, %al"); -__asm__ (" jne uart_dbgisr_com2_1"); - -/* ^C received, set flag */ -__asm__ (" movl $1, %ebx"); -__asm__ (" jmp uart_dbgisr_com2_1"); - -/* All chars read */ -__asm__ ("uart_dbgisr_com2_2:"); - -/* If flag is set we have to tweak TF */ -__asm__ (" cmpl $0, %ebx"); -__asm__ (" je uart_dbgisr_com2_3"); - -/* Flag is set */ -__asm__ (" movl BSP_uart_dbgisr_com_regsav+4, %ebx"); /* Restore ebx */ -__asm__ (" movl BSP_uart_dbgisr_com_regsav+8, %edx"); /* Restore edx */ - -/* Set TF bit */ -__asm__ (" popl %eax"); /* Pop eip */ -__asm__ (" movl %eax, BSP_uart_dbgisr_com_regsav + 4"); /* Save it */ -__asm__ (" popl %eax"); /* Pop cs */ -__asm__ (" movl %eax, BSP_uart_dbgisr_com_regsav + 8"); /* Save it */ -__asm__ (" popl %eax"); /* Pop flags */ -__asm__ (" orl $0x100, %eax"); /* Modify it */ -__asm__ (" pushl %eax"); /* Push it back */ -__asm__ (" movl BSP_uart_dbgisr_com_regsav+8, %eax"); /* Put back cs */ -__asm__ (" pushl %eax"); -__asm__ (" movl BSP_uart_dbgisr_com_regsav+4, %eax"); /* Put back eip */ -__asm__ (" pushl %eax"); - -/* Acknowledge IRQ */ -__asm__ (" movb $0x20, %al"); -__asm__ (" outb %al, $0x20"); -__asm__ (" movl BSP_uart_dbgisr_com_regsav, %eax"); /* Restore eax */ -__asm__ (" iret"); /* Done */ - -/* Flag is not set */ -__asm__ ("uart_dbgisr_com2_3:"); -__asm__ (" movl BSP_uart_dbgisr_com_regsav+4, %ebx"); /* Restore ebx */ -__asm__ (" movl BSP_uart_dbgisr_com_regsav+8, %edx"); /* Restore edx */ - -/* Acknowledge irq */ -__asm__ (" movb $0x20, %al"); -__asm__ (" outb %al, $0x20"); -__asm__ (" movl BSP_uart_dbgisr_com_regsav, %eax"); /* Restore eax */ -__asm__ (" iret"); /* Done */ diff --git a/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.c b/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.c deleted file mode 100644 index 58c39c8c24..0000000000 --- a/c/src/lib/libbsp/i386/shared/realmode_int/realmode_int.c +++ /dev/null @@ -1,454 +0,0 @@ -/** - * @file realmode_int.c - * - * @ingroup i386_shared - * - * @brief Real mode interrupt call implementation - */ - -/* - * Copyright (c) 2014 - CTU in Prague - * Jan Doležal ( dolezj21@fel.cvut.cz ) - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#include -#include -#include - -/* - * offsets to \a i386_realmode_interrupt_registers declared in realmode_int.h - * used in inline assmbler for better readability - */ -#define IR_EAX_OFF "0x00" -#define IR_EBX_OFF "0x04" -#define IR_ECX_OFF "0x08" -#define IR_EDX_OFF "0x0C" -#define IR_ESI_OFF "0x10" -#define IR_EDI_OFF "0x14" -#define IR_DS_OFF "0x18" -#define IR_ES_OFF "0x1A" -#define IR_FS_OFF "0x1C" -#define IR_GS_OFF "0x1E" - -/* - * offsets to \a rm_int_regs_bkp_param - */ -#define BKP_ESP_OFF "0x20" -#define BKP_SS_OFF "0x24" -#define BKP_DS_OFF "0x26" -#define RM_ENTRY "0x28" -#define PM_ENTRY "0x2C" - -/** - * @brief parameters, results, backup values accessible in real mode - * - * @note Struct members not necessarily used in C. This serves also as - * layout of memory and it is used within inline assembler. - */ -typedef struct { - i386_realmode_interrupt_registers inoutregs; - /** spot for back up of protected mode stack pointer */ - uint32_t pm_esp_bkp; - /** spot for back up of protected mode stack selector */ - uint16_t pm_ss_bkp; - /** spot for back up of protected mode data selector */ - uint16_t ds_bkp; - /** spot for setting up long indirect jump offset - to real mode from 16bit protected mode */ - uint16_t rm_entry; - /** spot for setting up long indirect jump segment - to real mode from 16bit protected mode */ - uint16_t rm_code_segment; - /** returning offset for long indirect jump back - to 32bit protected mode */ - uint32_t pm_entry; - /** returning selector for long indirect jump back - to 32bit protected mode */ - uint16_t pm_code_selector; - /* if this struct is to be modified update offset definitions as well */ -} RTEMS_PACKED rm_int_regs_bkp_param; - -/* offsets to \a pm_bkp_and_param */ -#define BKP_IDTR_LIM "0x00" -#define BKP_IDTR_BASE "0x02" -#define BKP_ES_OFF "0x06" -#define BKP_FS_OFF "0x08" -#define BKP_GS_OFF "0x0A" -#define RML_ENTRY "0x0C" -#define RML_D_SEL "0x12" -#define RM_SS "0x14" -#define RM_SP "0x16" -#define RM_DS "0x18" - -/** - * @brief backup values, pointers/parameters accessible in protected mode - * - * @note Struct members not necessarily used in C. This serves also as - * layout of memory and it is used within inline assembler. - */ -typedef struct { - /** spot for backup protected mode interrupt descriptor table register */ - uint16_t idtr_lim_bkp; - /** @see idtr_lim_bkp */ - uint32_t idtr_base_bkp; - /** spot to backup of ES register value in 32bit protected mode */ - uint16_t es_bkp; - /** spot to backup of FS register value in 32bit protected mode */ - uint16_t fs_bkp; - /** spot to backup of GS register value in 32bit protected mode */ - uint16_t gs_bkp; - /** values for indirect jump to 16bit protected mode */ - uint32_t rml_entry; - /** @see rml_entry */ - uint16_t rml_code_selector; - /** data selector for 16bit protected mode */ - uint16_t rml_data_selector; - /** values determinig location of real mode stack */ - uint16_t rm_stack_segment; - /** @see rm_stack_segment */ - uint16_t rm_stack_pointer; - /** data segment for real mode */ - uint16_t rm_data_segment; -} RTEMS_PACKED pm_bkp_and_param; - -/* addresses where we are going to put Interrupt buffer, - * parameter/returned/preserved values, stack and copy code - * for calling BIOS interrupt real mode interface - * The value is chosen arbitrarily in the first 640kB - * to be accessible for real mode. It should be out of range - * used by RTEMS because its base address is above 1MB. - * It has to be above first 4kB (or better 64kB) which could - * be used by BIOS. - */ -#define REAL_MODE_SPOT 0x12000 -/* REAL_MODE_SPOT value is also top of real mode stack */ - -/* buffers positions and lengths */ -#define DEFAULT_BUFFER_SIZE 512 -static void *default_rm_buffer_spot = (void *)REAL_MODE_SPOT; -static uint16_t default_rm_buffer_size = DEFAULT_BUFFER_SIZE; - -/* real mode stack */ -#define STACK_SIZE 8192 -#define INT_STACK_TOP REAL_MODE_SPOT - -/****************************** - * STACK * * - ****************************** REAL_MODE_SPOT - * INT_BUF * 512 B * - ****************************** - * INT_REGs * 50 B * - ****************************** - * INT_FNC *~149 B * - ******************************/ - -#define __DP_TYPE uint8_t -#define __DP_YES ((__DP_TYPE)1) -#define __DP_NO ((__DP_TYPE)-1) -#define __DP_FAIL ((__DP_TYPE)0) -static __DP_TYPE descsPrepared = __DP_NO; - -/* rml - real mode alike */ -#define rml_limit 0xFFFF -static uint16_t rml_code_dsc_index = 0; -static uint16_t rml_data_dsc_index = 0; - -/** - * @brief Prepares real-mode like descriptors to be used for switching - * to real mode. - * - * Descriptors will be placed to the GDT. - * - * @param[in] base32 32-bit physical address to be used as base for 16-bit - * protected mode descriptors - * @retval __DP_YES descriptors are prepared - * @retval __DP_FAIL descriptors allocation failed (GDT too small) - */ -static __DP_TYPE prepareRMDescriptors (void *base32) { - static void *prevBase = (void *)-1; - /* check if descriptors were prepared already */ - if (descsPrepared == __DP_YES && prevBase == base32) - return descsPrepared; - - if (descsPrepared == __DP_FAIL) - return descsPrepared; - - /* create 'real mode like' segment descriptors, for switching to real mode */ - rml_code_dsc_index = i386_next_empty_gdt_entry(); - if (rml_code_dsc_index == 0) - { - /* not enough space in GDT */ - descsPrepared = __DP_FAIL; - return descsPrepared; - } - - segment_descriptors flags_desc; - memset(&flags_desc, 0, sizeof(flags_desc)); - flags_desc.type = 0xE; /* bits 4 */ - flags_desc.descriptor_type = 0x1; /* bits 1 */ - flags_desc.privilege = 0x0; /* bits 2 */ - flags_desc.present = 0x1; /* bits 1 */ - flags_desc.available = 0x0; /* bits 1 */ - flags_desc.fixed_value_bits = 0x0; /* bits 1 */ - flags_desc.operation_size = 0x0; /* bits 1 */ - flags_desc.granularity = 0x0; /* bits 1 */ - i386_fill_segment_desc_base((unsigned)base32, &flags_desc); - i386_fill_segment_desc_limit(rml_limit, &flags_desc); - if (i386_raw_gdt_entry(rml_code_dsc_index, &flags_desc) == 0) - { - /* selector to GDT out of range */ - descsPrepared = __DP_FAIL; - return descsPrepared; - } - - rml_data_dsc_index = i386_next_empty_gdt_entry(); - if (rml_data_dsc_index == 0) - { - /* not enough space in GDT for both descriptors */ - descsPrepared = __DP_FAIL; - return descsPrepared; - } - - flags_desc.type = 0x2; /* bits 4 */ - if (i386_raw_gdt_entry(rml_data_dsc_index, &flags_desc) == 0) - { - /* selector to GDT out of range */ - descsPrepared = __DP_FAIL; - return descsPrepared; - } - prevBase = base32; - descsPrepared = __DP_YES; - return descsPrepared; -} - -void *i386_get_default_rm_buffer(uint16_t *size) { - *size = default_rm_buffer_size; - return default_rm_buffer_spot; -} - -int i386_real_interrupt_call(uint8_t interrupt_number, - i386_realmode_interrupt_registers *ir) -{ - uint32_t pagingon; - rm_int_regs_bkp_param *int_passed_regs_spot; - /* place where the code switching to realmode and executing - interrupt is coppied */ - void *rm_swtch_code_dst; - void *rm_stack_top; - - size_t cpLength; - void *cpBeg; - - /* values that can be passed from protected mode are stored in this struct - and they are passed later to the inline assembler executing interrupt */ - volatile pm_bkp_and_param pm_bkp, *pm_bkp_addr; - unsigned short unused_offset; - - __asm__ volatile( "\t" - "movl %%cr0, %%eax\n\t" - "andl %1, %%eax\n" - : "=a"(pagingon) - : "i"(CR0_PAGING) - ); - if (pagingon) - return 0; - - /* located under 1MB for real mode to be able to get/set values */ - int_passed_regs_spot = (rm_int_regs_bkp_param *) - (default_rm_buffer_spot+default_rm_buffer_size); - /* position for real mode code reallocation to the first 1MB of RAM */ - rm_swtch_code_dst = (void *)((uint32_t)int_passed_regs_spot + - sizeof(*int_passed_regs_spot)); - rm_stack_top = (void *)INT_STACK_TOP; - - if (prepareRMDescriptors(int_passed_regs_spot) != __DP_YES) - return 0; - - pm_bkp_addr = &pm_bkp; - i386_Physical_to_real( - rm_stack_top - STACK_SIZE, - (unsigned short *)&pm_bkp.rm_stack_segment, - (unsigned short *)&pm_bkp.rm_stack_pointer - ); - pm_bkp.rm_stack_pointer += STACK_SIZE; - pm_bkp.rml_code_selector = (rml_code_dsc_index<<3); - pm_bkp.rml_entry = ((uint32_t)rm_swtch_code_dst - - (uint32_t)int_passed_regs_spot); - pm_bkp.rml_data_selector = (rml_data_dsc_index<<3); - i386_Physical_to_real( - int_passed_regs_spot, - (unsigned short *)&pm_bkp.rm_data_segment, - &unused_offset - ); - - int_passed_regs_spot->inoutregs = *ir; - /* offset from the beginning of coppied code */ - uint16_t rm_entry_offset; - __asm__ volatile( - "movw $(rment-cp_beg), %0\n\t" - : "=r"(rm_entry_offset) - ); - i386_Physical_to_real( - rm_swtch_code_dst+rm_entry_offset, - (unsigned short *)&int_passed_regs_spot->rm_code_segment, - (unsigned short *)&int_passed_regs_spot->rm_entry - ); - __asm__ volatile( - "movl $(cp_end), %0\n\t" - "movw %%cs, %1\n\t" - : "=mr"(int_passed_regs_spot->pm_entry), - "=mr"(int_passed_regs_spot->pm_code_selector) - ); - /* copy code for switch to real mode and - executing interrupt to first MB of RAM */ - __asm__ volatile( "\t" - "mov $cp_end-cp_beg, %0\n\t" - "mov $cp_beg, %1\n\t" - : "=rm"(cpLength), "=rm"(cpBeg) - ); - memcpy(rm_swtch_code_dst, cpBeg, cpLength); - /* write interrupt number to be executed */ - uint16_t interrupt_number_off; - uint8_t *interrupt_number_ptr; - __asm__ volatile( "\t" - "movw $intnum-cp_beg, %0\n\t" - : "=rm"(interrupt_number_off) - ); - interrupt_number_ptr = (uint8_t *)(rm_swtch_code_dst+interrupt_number_off); - *interrupt_number_ptr = interrupt_number; - /* execute code that jumps to coppied function, which switches to real mode, - loads registers with values passed to interrupt and executes interrupt */ - __asm__ volatile( "\t" - /* backup stack */ - "movl %[regs_spot], %%ebx\n\t" - "movl %%esp, "BKP_ESP_OFF"(%%ebx)\n\t" - "movw %%ss, "BKP_SS_OFF"(%%ebx)\n\t" - /* backup data selector */ - "movw %%ds, "BKP_DS_OFF"(%%ebx)\n\t" - /* backup other selectors */ - "movl %[pm_bkp], %%esi\n\t" - "movw %%es, "BKP_ES_OFF"(%%esi)\n\t" - "movw %%fs, "BKP_FS_OFF"(%%esi)\n\t" - "movw %%gs, "BKP_GS_OFF"(%%esi)\n\t" - /* hopefully loader does not damage interrupt table on the beginning of - memory; that means length: 0x3FF, base: 0x0 */ - /* preserve idtr */ - "movl %%esi, %%eax\n\t" - "addl $"BKP_IDTR_LIM", %%eax\n\t" - "cli\n\t" - "sidt (%%eax)\n\t" - "movl $rmidt, %%eax\n\t" - "lidt (%%eax)\n\t" - /* prepare 'real mode like' data selector */ - "movw "RML_D_SEL"(%%esi), %%ax\n\t" - /* prepare real mode data segment value */ - "xorl %%edx,%%edx\n\t" - "movw "RM_DS"(%%esi), %%dx\n\t" - /* prepare real mode stack values */ - "movw "RM_SS"(%%esi), %%cx\n\t" - "movzwl "RM_SP"(%%esi), %%esp\n\t" - /* jump to copied function and */ - /* load 'real mode like' code selector */ - "ljmp *"RML_ENTRY"(%%esi)\n" -"rmidt:"/* limit and base for realmode interrupt descriptor table */ - ".word 0x3FF\n\t" - ".long 0\n\t" - /* load 'real mode like' data selectors */ -"cp_beg: .code16\n\t" - "movw %%ax, %%ss\n\t" - "movw %%ax, %%ds\n\t" - "movw %%ax, %%es\n\t" - "movw %%ax, %%fs\n\t" - "movw %%ax, %%gs\n\t" - /* disable protected mode */ - "movl %%cr0, %%eax\n\t" - "and %[cr0_prot_dis], %%ax\n\t" - "movl %%eax, %%cr0\n\t" - /* base for data selector of 16-bit protected mode is - at beginning of passed regs */ - /* flush prefetch queue by far jumping */ - "ljmp *"RM_ENTRY"\n\t" -"rment: " - /* establish rm stack - esp was already set in 32-bit protected mode*/ - "movw %%cx, %%ss\n\t" - /* set data segment (value prepared in 32-bit prot mode) */ - "movw %%dx, %%ds\n\t" - /* count real mode pointer so we don't need to overuse address - prefix (by using 32bit addresses in 16bit context) */ - "shll $4,%%edx\n\t" - "subl %%edx,%%ebx\n\t" - /* prepare values to be used after interrupt call */ - "pushw %%bx\n\t" - "pushw %%ds\n\t" - /* fill registers with parameters */ - "movw " IR_DS_OFF"(%%bx), %%ax\n\t" - "pushw %%ax\n\t" - "movl "IR_EAX_OFF"(%%bx), %%eax\n\t" - "movl "IR_ECX_OFF"(%%bx), %%ecx\n\t" - "movl "IR_EDX_OFF"(%%bx), %%edx\n\t" - "movl "IR_EDI_OFF"(%%bx), %%edi\n\t" - "movl "IR_ESI_OFF"(%%bx), %%esi\n\t" - "movw " IR_ES_OFF"(%%bx), %%es\n\t" - "movw " IR_FS_OFF"(%%bx), %%fs\n\t" - "movw " IR_GS_OFF"(%%bx), %%gs\n\t" - /* prepare ebx register */ - "movl "IR_EBX_OFF"(%%bx), %%ebx\n\t" - /* prepare ds */ - "popw %%ds\n\t" - /* interrupt instruction */ - ".byte 0xCD\n\t" -"intnum: .byte 0x0\n\t" - /* fill return structure */ - "pushw %%ds\n\t" - "pushl %%ebx\n\t" - "movw 0x6(%%esp), %%ds\n\t" - "movw 0x8(%%esp),%%bx\n\t" /* regs_spot */ - "movl %%eax,"IR_EAX_OFF"(%%bx)\n\t" - "popl %%eax\n\t" - "movl %%eax,"IR_EBX_OFF"(%%bx)\n\t" - "movl %%ecx,"IR_ECX_OFF"(%%bx)\n\t" - "movl %%edx,"IR_EDX_OFF"(%%bx)\n\t" - "movl %%esi,"IR_ESI_OFF"(%%bx)\n\t" - "movl %%edi,"IR_EDI_OFF"(%%bx)\n\t" - "popw %%ax\n\t" - "movw %%ax, " IR_DS_OFF"(%%bx)\n\t" - "movw %%es, " IR_ES_OFF"(%%bx)\n\t" - "movw %%fs, " IR_FS_OFF"(%%bx)\n\t" - "movw %%gs, " IR_GS_OFF"(%%bx)\n\t" - /* prepare protected mode data segment */ - "movw "BKP_DS_OFF"(%%bx), %%ax\n\t" - /* restore protected mode stack values */ - "movl "BKP_ESP_OFF"(%%bx),%%esp\n\t" - "movw "BKP_SS_OFF"(%%bx), %%dx\n\t" - /* return to protected mode */ - "movl %%cr0, %%ecx \n\t" - "or %[cr0_prot_ena], %%cx\n\t" - "movl %%ecx, %%cr0 \n\t" - "ljmpl *"PM_ENTRY"(%%bx)\n\t" - ".code32\n" - /* reload segmentation registers */ -"cp_end:" - "movw %%ax, %%ds\n\t" - /* restore stack segment in protected mode context */ - "movw %%dx, %%ss\n\t" - "movl %[pm_bkp], %%esi\n\t" - "movw "BKP_ES_OFF"(%%esi), %%es\n\t" - "movw "BKP_FS_OFF"(%%esi), %%fs\n\t" - "movw "BKP_GS_OFF"(%%esi), %%gs\n\t" - /* restore IDTR */ - "addl $"BKP_IDTR_LIM", %%esi\n\t" - "lidt (%%esi)\n\t" - : - : [regs_spot]"m"(int_passed_regs_spot), - [pm_bkp]"m"(pm_bkp_addr), - [cr0_prot_ena]"i"(CR0_PROTECTION_ENABLE), - [cr0_prot_dis]"i"(~CR0_PROTECTION_ENABLE) - : "memory", "ebx", "ecx", "edx", "esi", "edi" - ); - *ir = int_passed_regs_spot->inoutregs; - return 1; -} diff --git a/c/src/lib/libbsp/i386/shared/smp/README b/c/src/lib/libbsp/i386/shared/smp/README deleted file mode 100644 index df2e729456..0000000000 --- a/c/src/lib/libbsp/i386/shared/smp/README +++ /dev/null @@ -1,10 +0,0 @@ -The following files were developed by Erich Boleyn . -The original files were copied from http://www.uruk.org/mps/ and committed -into cvs as is. These files will be modified for RTEMS smp support, -but the original files are being commited in order to track any file -changes that occur. We are attempting to keep these changes as minimal -and conainted as possible. - - + smp-imps.c - + smp-imps.h - + ../irq/apic.h diff --git a/c/src/lib/libbsp/i386/shared/smp/getcpuid.c b/c/src/lib/libbsp/i386/shared/smp/getcpuid.c deleted file mode 100644 index c5284d0069..0000000000 --- a/c/src/lib/libbsp/i386/shared/smp/getcpuid.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * COPYRIGHT (c) 2011. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#include - -#include -#include - -static int lapic_dummy = 0; -unsigned imps_lapic_addr = ((unsigned)(&lapic_dummy)) - LAPIC_ID; - -uint32_t _CPU_SMP_Get_current_processor( void ) -{ - return APIC_ID(IMPS_LAPIC_READ(LAPIC_ID)); -} - diff --git a/c/src/lib/libbsp/i386/shared/smp/smp-imps.c b/c/src/lib/libbsp/i386/shared/smp/smp-imps.c deleted file mode 100644 index 2ba36804cb..0000000000 --- a/c/src/lib/libbsp/i386/shared/smp/smp-imps.c +++ /dev/null @@ -1,828 +0,0 @@ -/* - * Author: Erich Boleyn - * http://www.uruk.org/~erich/ - * - * Copyright (c) 1997-2011 Erich Boleyn. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * Source file implementing Intel MultiProcessor Specification (MPS) - * version 1.1 and 1.4 SMP hardware control for Intel Architecture CPUs, - * with hooks for running correctly on a standard PC without the hardware. - * - * This file was created from information in the Intel MPS version 1.4 - * document, order number 242016-004, which can be ordered from the - * Intel literature center. - * - * General limitations of this code: - * - * (1) : This code has never been tested on an MPS-compatible system with - * 486 CPUs, but is expected to work. - * (2) : Presumes "int", "long", and "unsigned" are 32 bits in size, and - * that 32-bit pointers and memory addressing is used uniformly. - */ - -#define _SMP_IMPS_C - -/* - * Includes here - */ -#if 0 -#define IMPS_DEBUG -#endif - -#include -#include -#include -#include - -/* - * XXXXX The following absolutely must be defined!!! - * - * The "KERNEL_PRINT" could be made a null macro with no danger, of - * course, but pretty much nothing would work without the other - * ones defined. - */ - -#if 0 -#define KERNEL_PRINT(x) /* some kind of print function */ -#define CMOS_WRITE_BYTE(x,y) /* write unsigned char "y" at CMOS loc "x" */ -#define CMOS_READ_BYTE(x) /* read unsigned char at CMOS loc "x" */ -#define PHYS_TO_VIRTUAL(x) /* convert physical address "x" to virtual */ -#define VIRTUAL_TO_PHYS(x) /* convert virtual address "x" to physical */ -#define UDELAY(x) /* delay roughly at least "x" microsecs */ -#define READ_MSR_LO(x) /* Read MSR low function */ -#else -#include -#include -#include -#include -#include -#include - -extern void _pc386_delay(void); - -/* #define KERNEL_PRINT(_format) printk(_format) */ - -static void CMOS_WRITE_BYTE( - unsigned int offset, - unsigned char value -) -{ - if ( offset < 128 ) { - outport_byte( 0x70, offset ); - outport_byte( 0x71, value ); - } else { - outport_byte( 0x72, offset ); - outport_byte( 0x73, value ); - } -} - -static unsigned char CMOS_READ_BYTE( - unsigned int offset -) -{ - unsigned char value; - if ( offset < 128 ) { - outport_byte( 0x70, offset ); - inport_byte( 0x71, value ); - } else { - outport_byte( 0x72, offset ); - inport_byte( 0x73, value ); - } - return value; -} - -#define PHYS_TO_VIRTUAL(_x) _x -#define VIRTUAL_TO_PHYS(_x) _x -static void UDELAY(int x) -{ int _i = x; - while ( _i-- ) - _pc386_delay(); -} - -#define READ_MSR_LO(_x) \ - (unsigned int)(read_msr(_x) & 0xffffffff) - -static inline unsigned long long read_msr(unsigned int msr) -{ - unsigned long long value; - - asm volatile("rdmsr" : "=A" (value) : "c" (msr)); - return value; -} -#endif - -/* - * Defines that are here so as not to be in the global header file. - */ -#define EBDA_SEG_ADDR 0x40E -#define BIOS_RESET_VECTOR 0x467 -#define LAPIC_ADDR_DEFAULT 0xFEE00000uL -#define IOAPIC_ADDR_DEFAULT 0xFEC00000uL -#define CMOS_RESET_CODE 0xF -#define CMOS_RESET_JUMP 0xa -#define CMOS_BASE_MEMORY 0x15 - -/* - * Static defines here for SMP use. - */ - -#define DEF_ENTRIES 23 - -static struct { - imps_processor proc[2]; - imps_bus bus[2]; - imps_ioapic ioapic; - imps_interrupt intin[16]; - imps_interrupt lintin[2]; -} defconfig = { - { { IMPS_BCT_PROCESSOR, 0, 0, 0, 0, 0}, - { IMPS_BCT_PROCESSOR, 1, 0, 0, 0, 0} }, - { { IMPS_BCT_BUS, 0, {'E', 'I', 'S', 'A', ' ', ' '}}, - { 255, 1, {'P', 'C', 'I', ' ', ' ', ' '}} }, - { IMPS_BCT_IOAPIC, 0, 0, IMPS_FLAG_ENABLED, IOAPIC_ADDR_DEFAULT }, - { { IMPS_BCT_IO_INTERRUPT, IMPS_INT_EXTINT, 0, 0, 0, 0xFF, 0}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 1, 0xFF, 1}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 0, 0xFF, 2}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 3, 0xFF, 3}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 4, 0xFF, 4}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 5, 0xFF, 5}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 6, 0xFF, 6}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 7, 0xFF, 7}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 8, 0xFF, 8}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 9, 0xFF, 9}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 10, 0xFF, 10}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 11, 0xFF, 11}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 12, 0xFF, 12}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 13, 0xFF, 13}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 14, 0xFF, 14}, - { IMPS_BCT_IO_INTERRUPT, IMPS_INT_INT, 0, 0, 15, 0xFF, 15} }, - { { IMPS_BCT_LOCAL_INTERRUPT, IMPS_INT_EXTINT, 0, 0, 15, 0xFF, 0}, - { IMPS_BCT_LOCAL_INTERRUPT, IMPS_INT_NMI, 0, 0, 15, 0xFF, 1} } -}; - -/* - * Exported globals here. - */ - -volatile int imps_release_cpus = 0; -int imps_enabled = 0; -int imps_num_cpus = 1; -unsigned char imps_cpu_apic_map[IMPS_MAX_CPUS]; -unsigned char imps_apic_cpu_map[IMPS_MAX_CPUS]; - -/* now defined in getcpuid.c */ -extern unsigned imps_lapic_addr; - -static void secondary_cpu_initialize(void); - -/* - * MPS checksum function - * - * Function finished. - */ -static int -get_checksum(unsigned start, int length) -{ - unsigned sum = 0; - - while (length-- > 0) { - sum += *((unsigned char *) (start++)); - } - - return (sum&0xFF); -} - -/* - * APIC ICR write and status check function. - */ -static int -send_ipi(unsigned int dst, unsigned int v) -{ - int to, send_status; - - IMPS_LAPIC_WRITE(LAPIC_ICR+0x10, (dst << 24)); - IMPS_LAPIC_WRITE(LAPIC_ICR, v); - - /* Wait for send to finish */ - to = 0; - do { - UDELAY(100); - send_status = IMPS_LAPIC_READ(LAPIC_ICR) & LAPIC_ICR_STATUS_PEND; - } while (send_status && (to++ < 1000)); - - return (to < 1000); -} - -/* - * Primary function for booting individual CPUs. - * - * This must be modified to perform whatever OS-specific initialization - * that is required. - */ -static int -boot_cpu(imps_processor *proc) -{ - int apicid = proc->apic_id, success = 1; - unsigned bootaddr; - unsigned bios_reset_vector = PHYS_TO_VIRTUAL(BIOS_RESET_VECTOR); - - /* - * Copy boot code for secondary CPUs here. Find it in between - * "patch_code_start" and "patch_code_end" symbols. The other CPUs - * will start there in 16-bit real mode under the 1MB boundary. - * "patch_code_start" should be placed at a 4K-aligned address - * under the 1MB boundary. - */ - - uint32_t *reset; - - bootaddr = (512-64)*1024; - reset= (uint32_t *)bootaddr; - - memcpy( - (char *) bootaddr, - _binary_appstart_bin_start, - (size_t)_binary_appstart_bin_size - ); - - reset[1] = (uint32_t)secondary_cpu_initialize; - reset[2] = (uint32_t)_Per_CPU_Get_by_index(apicid)->interrupt_stack_high; - - /* - * Generic CPU startup sequence starts here. - */ - - /* set BIOS reset vector */ - CMOS_WRITE_BYTE(CMOS_RESET_CODE, CMOS_RESET_JUMP); - *((volatile unsigned *) bios_reset_vector) = ((bootaddr & 0xFF000) << 12); - - /* clear the APIC error register */ - IMPS_LAPIC_WRITE(LAPIC_ESR, 0); - IMPS_LAPIC_READ(LAPIC_ESR); - - /* assert INIT IPI */ - send_ipi( - apicid, - LAPIC_ICR_TM_LEVEL | LAPIC_ICR_LEVELASSERT | LAPIC_ICR_DM_INIT - ); - UDELAY(10000); - - /* de-assert INIT IPI */ - send_ipi(apicid, LAPIC_ICR_TM_LEVEL | LAPIC_ICR_DM_INIT); - - UDELAY(10000); - - /* - * Send Startup IPIs if not an old pre-integrated APIC. - */ - - if (proc->apic_ver >= APIC_VER_NEW) { - int i; - for (i = 1; i <= 2; i++) { - send_ipi(apicid, LAPIC_ICR_DM_SIPI | ((bootaddr >> 12) & 0xFF)); - UDELAY(1000); - } - } - - /* - * Generic CPU startup sequence ends here, the rest is cleanup. - */ - - /* clear the APIC error register */ - IMPS_LAPIC_WRITE(LAPIC_ESR, 0); - IMPS_LAPIC_READ(LAPIC_ESR); - - /* clean up BIOS reset vector */ - CMOS_WRITE_BYTE(CMOS_RESET_CODE, 0); - *((volatile unsigned *) bios_reset_vector) = 0; - - printk("\n"); - - return success; -} - -/* - * read bios stuff and fill tables - */ -static void -add_processor(imps_processor *proc) -{ - int apicid = proc->apic_id; - - printk(" Processor [APIC id %d ver %d]: ", apicid, proc->apic_ver); - if (!(proc->flags & IMPS_FLAG_ENABLED)) { - printk("DISABLED\n"); - return; - } - if (proc->flags & (IMPS_CPUFLAG_BOOT)) { - printk("#0 BootStrap Processor (BSP)\n"); - return; - } - if (boot_cpu(proc)) { - - /* XXXXX add OS-specific setup for secondary CPUs here */ - - imps_cpu_apic_map[imps_num_cpus] = apicid; - imps_apic_cpu_map[apicid] = imps_num_cpus; - imps_num_cpus++; - } -} - - -static void -add_bus(imps_bus *bus) -{ - char str[8]; - - memcpy(str, bus->bus_type, 6); - str[6] = 0; - printk(" Bus id %d is %s\n", bus->id, str); - - /* XXXXX add OS-specific code here */ -} - -static void -add_ioapic(imps_ioapic *ioapic) -{ - printk(" I/O APIC id %d ver %d, address: 0x%x ", - ioapic->id, ioapic->ver, ioapic->addr); - if (!(ioapic->flags & IMPS_FLAG_ENABLED)) { - printk("DISABLED\n"); - return; - } - printk("\n"); - - /* XXXXX add OS-specific code here */ -} - -static void -imps_read_config_table(unsigned start, int count) -{ - while (count-- > 0) { - switch (*((unsigned char *)start)) { - case IMPS_BCT_PROCESSOR: - if ( imps_num_cpus < rtems_configuration_get_maximum_processors() ) { - if (_SMP_Should_start_processor((uint32_t) imps_num_cpus)) { - add_processor((imps_processor *)start); - } - } else - imps_num_cpus++; - start += 12; /* 20 total */ - break; - case IMPS_BCT_BUS: - add_bus((imps_bus *)start); - break; - case IMPS_BCT_IOAPIC: - add_ioapic((imps_ioapic *)start); - break; -#if 0 /* XXXXX uncomment this if "add_io_interrupt" is implemented */ - case IMPS_BCT_IO_INTERRUPT: - add_io_interrupt((imps_interrupt *)start); - break; -#endif -#if 0 /* XXXXX uncomment this if "add_local_interrupt" is implemented */ - case IMPS_BCT_LOCAL_INTERRUPT: - add_local_interupt((imps_interrupt *)start); - break; -#endif - default: - break; - } - start += 8; - } - if ( imps_num_cpus > rtems_configuration_get_maximum_processors() ) { - printk( - "WARNING!! Found more CPUs (%d) than configured for (%d)!!\n", - imps_num_cpus - 1, - rtems_configuration_get_maximum_processors() - ); - imps_num_cpus = rtems_configuration_get_maximum_processors(); - return; - } -} - -static int -imps_bad_bios(imps_fps *fps_ptr) -{ - int sum; - imps_cth *local_cth_ptr - = (imps_cth *) PHYS_TO_VIRTUAL(fps_ptr->cth_ptr); - - if (fps_ptr->feature_info[0] > IMPS_FPS_DEFAULT_MAX) { - printk(" Invalid MP System Configuration type %d\n", - fps_ptr->feature_info[0]); - return 1; - } - - if (fps_ptr->cth_ptr) { - sum = get_checksum((unsigned)local_cth_ptr, - local_cth_ptr->base_length); - if (local_cth_ptr->sig != IMPS_CTH_SIGNATURE || sum) { - printk( - " Bad MP Config Table sig 0x%x and/or checksum 0x%x\n", - (unsigned)(fps_ptr->cth_ptr), - sum - ); - return 1; - } - if (local_cth_ptr->spec_rev != fps_ptr->spec_rev) { - printk( - " Bad MP Config Table sub-revision # %d\n", - local_cth_ptr->spec_rev - ); - return 1; - } - if (local_cth_ptr->extended_length) { - sum = (get_checksum(((unsigned)local_cth_ptr) - + local_cth_ptr->base_length, - local_cth_ptr->extended_length) - + local_cth_ptr->extended_checksum) & 0xFF; - if (sum) { - printk(" Bad Extended MP Config Table checksum 0x%x\n", sum); - return 1; - } - } - } else if (!fps_ptr->feature_info[0]) { - printk(" Missing configuration information\n"); - return 1; - } - - return 0; -} - -static void -imps_read_bios(imps_fps *fps_ptr) -{ - int apicid; - unsigned cth_start, cth_count; - imps_cth *local_cth_ptr - = (imps_cth *)PHYS_TO_VIRTUAL(fps_ptr->cth_ptr); - char *str_ptr; - - printk("Intel MultiProcessor Spec 1.%d BIOS support detected\n", - fps_ptr->spec_rev); - - /* - * Do all checking of errors which would definitely - * lead to failure of the SMP boot here. - */ - if (imps_bad_bios(fps_ptr)) { - printk(" Disabling MPS support\n"); - return; - } - - if (fps_ptr->feature_info[1] & IMPS_FPS_IMCRP_BIT) { - str_ptr = "IMCR and PIC"; - } else { - str_ptr = "Virtual Wire"; - } - if (fps_ptr->cth_ptr) { - imps_lapic_addr = local_cth_ptr->lapic_addr; - } else { - imps_lapic_addr = LAPIC_ADDR_DEFAULT; - } - printk(" APIC config: \"%s mode\" Local APIC address: 0x%x\n", - str_ptr, imps_lapic_addr); - if (imps_lapic_addr != (READ_MSR_LO(0x1b) & 0xFFFFF000)) { - printk("Inconsistent Local APIC address, Disabling SMP support\n"); - return; - } - imps_lapic_addr = PHYS_TO_VIRTUAL(imps_lapic_addr); - - /* - * Setup primary CPU. - */ - apicid = IMPS_LAPIC_READ(LAPIC_SPIV); - IMPS_LAPIC_WRITE(LAPIC_SPIV, apicid|LAPIC_SPIV_ENABLE_APIC); - apicid = APIC_ID(IMPS_LAPIC_READ(LAPIC_ID)); - imps_cpu_apic_map[0] = apicid; - imps_apic_cpu_map[apicid] = 0; - - if (fps_ptr->cth_ptr) { - char str1[16], str2[16]; - memcpy(str1, local_cth_ptr->oem_id, 8); - str1[8] = 0; - memcpy(str2, local_cth_ptr->prod_id, 12); - str2[12] = 0; - printk(" OEM id: %s Product id: %s\n", str1, str2); - cth_start = ((unsigned) local_cth_ptr) + sizeof(imps_cth); - cth_count = local_cth_ptr->entry_count; - } else { - *((volatile unsigned *) IOAPIC_ADDR_DEFAULT) = IOAPIC_ID; - defconfig.ioapic.id - = APIC_ID(*((volatile unsigned *) - (IOAPIC_ADDR_DEFAULT+IOAPIC_RW))); - *((volatile unsigned *) IOAPIC_ADDR_DEFAULT) = IOAPIC_VER; - defconfig.ioapic.ver - = APIC_VERSION(*((volatile unsigned *) - (IOAPIC_ADDR_DEFAULT+IOAPIC_RW))); - defconfig.proc[apicid].flags - = IMPS_FLAG_ENABLED|IMPS_CPUFLAG_BOOT; - defconfig.proc[!apicid].flags = IMPS_FLAG_ENABLED; - imps_num_cpus = 2; - if (fps_ptr->feature_info[0] == 1 - || fps_ptr->feature_info[0] == 5) { - memcpy(defconfig.bus[0].bus_type, "ISA ", 6); - } - if (fps_ptr->feature_info[0] == 4 - || fps_ptr->feature_info[0] == 7) { - memcpy(defconfig.bus[0].bus_type, "MCA ", 6); - } - if (fps_ptr->feature_info[0] > 4) { - defconfig.proc[0].apic_ver = 0x10; - defconfig.proc[1].apic_ver = 0x10; - defconfig.bus[1].type = IMPS_BCT_BUS; - } - if (fps_ptr->feature_info[0] == 2) { - defconfig.intin[2].type = 255; - defconfig.intin[13].type = 255; - } - if (fps_ptr->feature_info[0] == 7) { - defconfig.intin[0].type = 255; - } - cth_start = (unsigned) &defconfig; - cth_count = DEF_ENTRIES; - } - imps_read_config_table(cth_start, cth_count); - - /* %%%%% ESB read extended entries here */ - - imps_enabled = 1; -} - -/* - * Given a region to check, this actually looks for the "MP Floating - * Pointer Structure". The return value indicates if the correct - * signature and checksum for a floating pointer structure of the - * appropriate spec revision was found. If so, then do not search - * further. - * - * NOTE: The memory scan will always be in the bottom 1 MB. - * - * This function presumes that "start" will always be aligned to a 16-bit - * boundary. - * - * Function finished. - */ -static int -imps_scan(unsigned start, unsigned length) -{ - printk("Scanning from 0x%x for %d bytes\n", start, length); - - while (length > 0) { - imps_fps *fps_ptr = (imps_fps *) PHYS_TO_VIRTUAL(start); - - if (fps_ptr->sig == IMPS_FPS_SIGNATURE - && fps_ptr->length == 1 - && (fps_ptr->spec_rev == 1 || fps_ptr->spec_rev == 4) - && !get_checksum(start, 16)) { - printk("Found MP Floating Structure Pointer at %x\n", start); - imps_read_bios(fps_ptr); - return 1; - } - - length -= 16; - start += 16; - } - - return 0; -} - -#if !defined(__rtems__) -/* - * This is the primary function to "force" SMP support, with - * the assumption that you have consecutively numbered APIC ids. - */ -int -imps_force(int ncpus) -{ - int apicid, i; - imps_processor p; - - printk("Intel MultiProcessor \"Force\" Support\n"); - - imps_lapic_addr = (READ_MSR_LO(0x1b) & 0xFFFFF000); - imps_lapic_addr = PHYS_TO_VIRTUAL(imps_lapic_addr); - - /* - * Setup primary CPU. - */ - apicid = IMPS_LAPIC_READ(LAPIC_SPIV); - IMPS_LAPIC_WRITE(LAPIC_SPIV, apicid|LAPIC_SPIV_ENABLE_APIC); - apicid = APIC_ID(IMPS_LAPIC_READ(LAPIC_ID)); - imps_cpu_apic_map[0] = apicid; - imps_apic_cpu_map[apicid] = 0; - - p.type = 0; - p.apic_ver = 0x10; - p.signature = p.features = 0; - - for (i = 0; i < ncpus; i++) { - if (apicid == i) { - p.flags = IMPS_FLAG_ENABLED | IMPS_CPUFLAG_BOOT; - } else { - p.flags = IMPS_FLAG_ENABLED; - } - p.apic_id = i; - add_processor(&p); - } - - return imps_num_cpus; -} -#endif - -/* - * This is the primary function for probing for MPS compatible hardware - * and BIOS information. Call this during the early stages of OS startup, - * before memory can be messed up. - * - * The probe looks for the "MP Floating Pointer Structure" at locations - * listed at the top of page 4-2 of the spec. - * - * Environment requirements from the OS to run: - * - * (1) : A non-linear virtual to physical memory mapping is probably OK, - * as (I think) the structures all fall within page boundaries, - * but a linear mapping is recommended. Currently assumes that - * the mapping will remain identical over time (which should be - * OK since it only accesses memory which shouldn't be munged - * by the OS anyway). - * (2) : The OS only consumes memory which the BIOS says is OK to use, - * and not any of the BIOS standard areas (the areas 0x400 to - * 0x600, the EBDA, 0xE0000 to 0xFFFFF, and unreported physical - * RAM). Sometimes a small amount of physical RAM is not - * reported by the BIOS, to be used to store MPS and other - * information. - * (3) : It must be possible to read the CMOS. - * (4) : There must be between 512K and 640K of lower memory (this is a - * sanity check). - * - * Function finished. - */ -static int -imps_probe(void) -{ - /* - * Determine possible address of the EBDA - */ - unsigned ebda_addr = *((unsigned short *) - PHYS_TO_VIRTUAL(EBDA_SEG_ADDR)) << 4; - - /* - * Determine amount of installed lower memory (not *available* - * lower memory). - * - * NOTE: This should work reliably as long as we verify the - * machine is at least a system that could possibly have - * MPS compatibility to begin with. - */ - unsigned mem_lower = ((CMOS_READ_BYTE(CMOS_BASE_MEMORY+1) << 8) - | CMOS_READ_BYTE(CMOS_BASE_MEMORY)) << 10; - -#ifdef IMPS_DEBUG - imps_enabled = 0; - imps_num_cpus = 1; -#endif - - /* - * Sanity check : if this isn't reasonable, it is almost impossibly - * unlikely to be an MPS compatible machine, so return failure. - */ - if (mem_lower < 512*1024 || mem_lower > 640*1024) { - return 0; - } - - if (ebda_addr > mem_lower - 1024 - || ebda_addr + *((unsigned char *) PHYS_TO_VIRTUAL(ebda_addr)) - * 1024 > mem_lower) { - ebda_addr = 0; - } - - if (((ebda_addr && imps_scan(ebda_addr, 1024)) - || (!ebda_addr && imps_scan(mem_lower - 1024, 1024)) - || imps_scan(0xF0000, 0x10000)) && imps_enabled) { - return imps_num_cpus; - } - - /* - * If no BIOS info on MPS hardware is found, then return failure. - */ - - return 0; -} - -/* - * RTEMS SMP BSP Support - */ -static void smp_apic_ack(void) -{ - (void) IMPS_LAPIC_READ(LAPIC_SPIV); /* dummy read */ - IMPS_LAPIC_WRITE(LAPIC_EOI, 0 ); /* ACK the interrupt */ -} - -/* FIXME: There should be a header file for this */ -void Clock_isr(void *arg); - -static void bsp_inter_processor_interrupt(void *arg) -{ - unsigned long message; - - (void) arg; - - smp_apic_ack(); - - message = _SMP_Inter_processor_interrupt_handler(); - - if ((message & SMP_MESSAGE_CLOCK_TICK) != 0) { - Clock_isr(NULL); - } -} - -static void ipi_install_irq(void) -{ - rtems_status_code status; - - status = rtems_interrupt_handler_install( - 16, - "smp-imps", - RTEMS_INTERRUPT_UNIQUE, - bsp_inter_processor_interrupt, - NULL - ); - assert(status == RTEMS_SUCCESSFUL); -} - -#ifdef __SSE__ -extern void enable_sse(void); -#endif - -/* pc386 specific initialization */ -static void secondary_cpu_initialize(void) -{ - int apicid; - - asm volatile( "lidt IDT_Descriptor" ); - - apicid = IMPS_LAPIC_READ(LAPIC_SPIV); - IMPS_LAPIC_WRITE(LAPIC_SPIV, apicid|LAPIC_SPIV_ENABLE_APIC); - -#ifdef __SSE__ - enable_sse(); -#endif - - _SMP_Start_multitasking_on_secondary_processor(); -} - -uint32_t _CPU_SMP_Initialize( void ) -{ - /* XXX need to deal with finding too many cores */ - - return (uint32_t) imps_probe(); -} - -void _CPU_SMP_Prepare_start_multitasking( void ) -{ - /* Do nothing */ -} - -bool _CPU_SMP_Start_processor( uint32_t cpu_index ) -{ - (void) cpu_index; - - return true; -} - -void _CPU_SMP_Finalize_initialization( uint32_t cpu_count ) -{ - if ( cpu_count > 1 ) - ipi_install_irq(); -} - -void _CPU_SMP_Send_interrupt( uint32_t target_processor_index ) -{ - send_ipi( target_processor_index, 0x30 ); -} -- cgit v1.2.3