From 48bfd9925727e46aada26c40c967a5ad57d98919 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Tue, 30 Nov 1999 19:58:02 +0000 Subject: Renamed shm.h to shm_driver.h to avoid conflicts with POSIX shm.h. Renamed file shmsupp/intr.c in some BSPs to shmsupp/cause_intr.c to avoid conflict with rtems/src/intr.c (Classic API Interrupt Manager). --- c/src/lib/libbsp/shmdr/shm.h | 541 ------------------------------------------- 1 file changed, 541 deletions(-) delete mode 100644 c/src/lib/libbsp/shmdr/shm.h (limited to 'c/src/lib/libbsp/shmdr/shm.h') diff --git a/c/src/lib/libbsp/shmdr/shm.h b/c/src/lib/libbsp/shmdr/shm.h deleted file mode 100644 index 2f212fd759..0000000000 --- a/c/src/lib/libbsp/shmdr/shm.h +++ /dev/null @@ -1,541 +0,0 @@ -/* shm.h - * - * This include file contains all the constants, structures, - * and global variables for this RTEMS based shared memory - * communications interface driver. - * - * Processor board dependencies are in other files. - * - * COPYRIGHT (c) 1989-1999. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __SHM_h -#define __SHM_h - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/* The information contained in the Node Status, Locked Queue, and - * Envelope Control Blocks must be maintained in a NEUTRAL format. - * Currently the neutral format may be selected as big or little - * endian by simply defining either NEUTRAL_BIG or NEUTRAL_LITTLE. - * - * It is CRITICAL to note that the neutral format can ONLY be - * changed by modifying this file and recompiling the ENTIRE - * SHM driver including ALL target specific support files. - * - * The following table details the memory contents for the endian - * field of the Node Status Control Block in the various - * data format configurations (data is in hexadecimal): - * - * NEUTRAL NATIVE BYTE 0 BYTE 1 BYTE 2 BYTE 3 - * ======= ====== ====== ====== ====== ====== - * BIG BIG 00 00 00 01 - * BIG LITTLE 10 00 00 00 - * LITTLE BIG 01 00 00 00 - * LITTLE LITTLE 00 00 00 10 - * - * - * NOTE: XXX - * PORTABILITY OF LOCKING INSTRUCTIONS - * =================================== - * The locking mechanism described below is not - * general enough. Where the hardware supports - * it we should use "atomic swap" instructions - * so the values in the lock can be tailored to - * support a CPU with only weak atomic memory - * instructions. There are combinations of - * CPUs with inflexible atomic memory instructions - * which appear to be incompatible. For example, - * the SPARClite instruction uses a byte which is - * 0xFF when locked. The PA-RISC uses 1 to indicate - * locked and 0 when unlocked. These CPUs appear to - * have incompatible lock instructions. But - * they could be used in a heterogenous system - * with does not mix SPARCs and PA-RISCs. For - * example, the i386 and SPARC or i386 and SPARC - * could work together. The bottom line is that - * not every CPU will work together using this - * locking scheme. There are supposed to be - * algorithms to do this without hardware assist - * and one of these should be incorporated into - * the shared memory driver. - * - * The most flexible scheme using the instructions - * of the various CPUs for efficiency would be to use - * "atomic swaps" wherever possible. Make the lock - * and unlock configurable much like BIG vs LITTLE - * endian use of shared memory is now. The values - * of the lock could then reflect the "worst" - * CPU in a system. This still results in mixes - * of CPUs which are incompatible. - * - * The current locking mechanism is based upon the MC68020 - * "tas" instruction which is atomic. All ports to other CPUs - * comply with the restrictive placement of lock bit by this - * instruction. The lock bit is the most significant bit in a - * big-endian rtems_unsigned32. On other processors, the lock is - * typically implemented via an atomic swap or atomic modify - * bits type instruction. - */ - -#define NEUTRAL_BIG - -#ifdef NEUTRAL_BIG -#define SHM_BIG 0x00000001 -#define SHM_LITTLE 0x10000000 -#endif - -#ifdef NEUTRAL_LITTLE -#define SHM_BIG 0x01000000 -#define SHM_LITTLE 0x00000010 -#endif - -/* - * The following are the values used to fill in the lock field. Some CPUs - * are able to write only a single value into field. By making the - * lock and unlock values configurable, CPUs which support "atomic swap" - * instructions can generally be made to work in any heterogeneous - * configuration. However, it is possible for two CPUs to be incompatible - * in regards to the lock field values. This occurs when two CPUs - * which write only a single value to the field are used in a system - * but the two CPUs write different incompatible values. - * - * NOTE: The following is a first attempt at defining values which - * have a chance at working together. The m68k should use - * chk2 instead of tas to be less restrictive. Target endian - * problems (like the Force CPU386 which has (broken) big endian - * view of the VMEbus address space) are not addressed yet. - */ - -#if defined(__i960__) -#define SHM_LOCK_VALUE 0x00000080 -#define SHM_UNLOCK_VALUE 0 -#elif defined(__mc68000__) -#define SHM_LOCK_VALUE 0x80000000 -#define SHM_UNLOCK_VALUE 0 -#define SHM_LOCK_VALUE 0x80000000 -#define SHM_UNLOCK_VALUE 0 -#elif defined(__i386__) -#define SHM_LOCK_VALUE 0x80000000 -#define SHM_UNLOCK_VALUE 0 -#elif defined(__mips__) -#define SHM_LOCK_VALUE 0x80000000 -#define SHM_UNLOCK_VALUE 0 -#elif defined(__hppa__) -#define SHM_LOCK_VALUE 0 -#define SHM_UNLOCK_VALUE 1 -#elif defined(__PPC__) -#define SHM_LOCK_VALUE 1 -#define SHM_UNLOCK_VALUE 0 -#elif defined(__unix__) -#define SHM_LOCK_VALUE 0 -#define SHM_UNLOCK_VALUE 1 -#elif defined(no_cpu) /* for this values are irrelevant */ -#define SHM_LOCK_VALUE 1 -#define SHM_UNLOCK_VALUE 0 -#else -#error "shm.h - no SHM_LOCK_VALUE defined for this CPU architecture" -#endif - -#define Shm_Convert( value ) \ - ((Shm_Configuration->convert) ? \ - (*Shm_Configuration->convert)(value) : (value)) - -/* constants */ - -#define SHM_MASTER 1 /* master initialization node */ -#define SHM_FIRST_NODE 1 - -/* size constants */ - -#define KILOBYTE (1024) -#define MEGABYTE (1024*1024) - -/* inter-node interrupt values */ - -#define NO_INTERRUPT 0 /* used for polled nodes */ -#define BYTE 1 -#define WORD 2 -#define LONG 4 - -/* operational mode constants -- used in SHM Configuration Table */ -#define POLLED_MODE 0 -#define INTR_MODE 1 - -/* error codes */ - -#define NO_ERROR 0 -#define SHM_NO_FREE_PKTS 0xf0000 - -/* null pointers of different types */ - -#define NULL_ENV_CB ((Shm_Envelope_control *) 0) -#define NULL_CONVERT 0 - -/* - * size of stuff before preamble in envelope. - * It must be a constant since we will use it to generate MAX_PACKET_SIZE - */ - -#define SHM_ENVELOPE_PREFIX_OVERHEAD (4 * sizeof(vol_u32)) - -/* - * The following is adjusted so envelopes are MAX_ENVELOPE_SIZE bytes long. - * It must be >= RTEMS_MINIMUM_PACKET_SIZE in mppkt.h. - */ - -#ifndef MAX_ENVELOPE_SIZE -#define MAX_ENVELOPE_SIZE 0x180 -#endif - -#define MAX_PACKET_SIZE (MAX_ENVELOPE_SIZE - \ - SHM_ENVELOPE_PREFIX_OVERHEAD + \ - sizeof(Shm_Envelope_preamble) + \ - sizeof(Shm_Envelope_postamble)) - - -/* constants pertinent to Locked Queue routines */ - -#define LQ_UNLOCKED SHM_UNLOCK_VALUE -#define LQ_LOCKED SHM_LOCK_VALUE - -/* constants related to the Free Envelope Pool */ - -#define FREE_ENV_POOL 0 -#define FREE_ENV_CB (&Shm_Locked_queues[ FREE_ENV_POOL ]) - -/* The following are important when dealing with - * the shared memory communications interface area. - * - * NOTE: The starting address and length of the shared memory - * is defined in a system dependent file. - */ - -#define START_NS_CBS ((void *)Shm_Configuration->base) -#define START_LQ_CBS ((START_NS_CBS) + \ - ( (sizeof (Shm_Node_status_control)) * (Shm_Maximum_nodes + 1) ) ) -#define START_ENVELOPES ( ((void *) START_LQ_CBS) + \ - ( (sizeof (Shm_Locked_queue_Control)) * (Shm_Maximum_nodes + 1) ) ) -#define END_SHMCI_AREA ( (void *) START_ENVELOPES + \ - ( (sizeof (Shm_Envelope_control)) * Shm_Maximum_envelopes ) ) -#define END_SHARED_MEM (START_NS_CBS+Shm_Configuration->length) - -/* macros */ - -#define Shm_Is_master_node() \ - ( SHM_MASTER == Shm_Local_node ) - -#define Shm_Free_envelope( ecb ) \ - Shm_Locked_queue_Add( FREE_ENV_CB, (ecb) ) -#define Shm_Allocate_envelope() \ - Shm_Locked_queue_Get(FREE_ENV_CB) - -#define Shm_Initialize_receive_queue(node) \ - Shm_Locked_queue_Initialize( &Shm_Locked_queues[node], node ) - -#define Shm_Append_to_receive_queue(node, ecb) \ - Shm_Locked_queue_Add( &Shm_Locked_queues[node], (ecb) ) - -#define Shm_Envelope_control_to_packet_prefix_pointer(ecb) \ - ((void *)(ecb)->packet) - -#define Shm_Packet_prefix_to_envelope_control_pointer( pkt ) \ - ((Shm_Envelope_control *)((rtems_unsigned8 *)(pkt) - \ - (sizeof(Shm_Envelope_preamble) + SHM_ENVELOPE_PREFIX_OVERHEAD))) - -#define Shm_Build_preamble(ecb, node) \ - (ecb)->Preamble.endian = Shm_Configuration->format - -#define Shm_Build_postamble( ecb ) - -/* volatile types */ - -typedef volatile rtems_unsigned8 vol_u8; -typedef volatile rtems_unsigned32 vol_u32; - -/* shm control information */ - -struct shm_info { - vol_u32 not_currently_used_0; - vol_u32 not_currently_used_1; - vol_u32 not_currently_used_2; - vol_u32 not_currently_used_3; -}; - -typedef struct { - /*byte start_of_text;*/ - vol_u32 endian; - vol_u32 not_currently_used_0; - vol_u32 not_currently_used_1; - vol_u32 not_currently_used_2; -} Shm_Envelope_preamble; - -typedef struct { -} Shm_Envelope_postamble; - -/* WARNING! If you change this structure, don't forget to change - * SHM_ENVELOPE_PREFIX_OVERHEAD and - * Shm_Packet_prefix_to_envelope_control_pointer() above. - */ - -/* This comment block describes the contents of each field - * of the Envelope Control Block: - * - * next - The index of the next envelope on this queue. - * queue - The index of the queue this envelope is on. - * index - The index of this envelope. - * Preamble - Generic packet preamble. One day this structure - * could be enhanced to contain routing information. - * packet - RTEMS MPCI packet. Untouched by SHM Driver - * other than copying and format conversion as - * documented in the RTEMS User's Guide. - * Postamble - Generic packet postamble. One day this structure - * could be enhanced to contain checksum information. - */ - -typedef struct { - vol_u32 next; /* next envelope on queue */ - vol_u32 queue; /* queue on which this resides */ - vol_u32 index; /* index into array of envelopes*/ - vol_u32 pad0; /* insure the next one is aligned */ - Shm_Envelope_preamble Preamble; /* header information */ - vol_u8 packet[MAX_PACKET_SIZE]; /* RTEMS INFO */ - Shm_Envelope_postamble Postamble;/* trailer information */ -} Shm_Envelope_control; - -/* This comment block describes the contents of each field - * of the Locked Queue Control Block: - * - * lock - Lock used to insure mutually exclusive access. - * front - Index of first envelope on queue. This field - * is used to remove head of queue (receive). - * rear - Index of last envelope on queue. This field - * is used to add evelope to queue (send). - * owner - The node number of the recipient (owning) node. - * RTEMS does not use the node number zero (0). - * The zero node is used by the SHM Driver for the - * Free Envelope Queue shared by all nodes. - */ - -typedef struct { - vol_u32 lock; /* lock field for this queue */ - vol_u32 front; /* first envelope on queue */ - vol_u32 rear; /* last envelope on queue */ - vol_u32 owner; /* receiving (i.e. owning) node */ -} Shm_Locked_queue_Control; - -/* This comment block describes the contents of each field - * of the Node Status Control Block: - * - * status - Node status. Current values are Pending Initialization, - * Initialization Complete, and Active Node. Other values - * could be added to enhance fault tolerance. - * error - Zero if the node has not failed. Otherwise, - * this field contains a status indicating the - * failure reason. - * int_address, int_value, and int_length - * - These field are the Interrupt Information table - * for this node in neutral format. This is how - * each node knows how to generate interrupts. - */ - -typedef struct { - vol_u32 status; /* node status information */ - vol_u32 error; /* fatal error code */ - vol_u32 int_address; /* write here for interrupt */ - vol_u32 int_value; /* this value causes interrupt */ - vol_u32 int_length; /* for this length (0,1,2,4) */ - vol_u32 not_currently_used_0; - vol_u32 not_currently_used_1; - vol_u32 not_currently_used_2; -} Shm_Node_status_control; - -/* This comment block describes the contents of each field - * of the Interrupt Information Table. This table describes - * how another node can generate an interrupt to this node. - * This information is target board dependent. If the - * SHM Driver is in POLLED_MODE, then all fields should - * be initialized to NO_INTERRUPT. - * - * address - The address to which another node should - * write to cause an interrupt. - * value - The value which must be written - * length - The size of the value to write. Valid - * values are BYTE, WORD, and LONG. - * - * NOTE: The Node Status Control Block contains this - * information in neutral format and not in a - * structure to avoid potential alignment problems. - */ - -typedef struct { - vol_u32 *address; /* write here for interrupt */ - vol_u32 value; /* this value causes interrupt */ - vol_u32 length; /* for this length (0,1,2,4) */ -} Shm_Interrupt_information; - -/* SHM Configuration Table - * - * This comment block describes the contents of each field - * of the SHM Configuration Table. - * - * base - The base address of the shared memory. This - * address may be specific to this node. - * length - The length of the shared memory in bytes. - * format - The natural format for rtems_unsigned32's in the - * shared memory. Valid values are currently - * only SHM_LITTLE and SHM_BIG. - * convert - The address of the routine which converts - * between neutral and local format. - * poll_intr - The operational mode of the driver. Some - * target boards may not provide hardware for - * an interprocessor interrupt. If POLLED_MODE - * is selected, the SHM driver will install a - * wrapper around the Clock_isr() to poll for - * incoming packets. Throughput is dependent - * on the time between clock interrupts. - * Valid values are POLLED_MODE and INTR_MODE. - * cause_intr - This is the address of the routine used to - * write to a particular address and cause an - * interrupt on another node. This routine - * may need to be target dependent if something - * other than a normal write from C does not work. - * Intr - This structure describes the operation required - * to cause an interrupt to this node. The actual - * contents of this structure are described above. - */ - -struct shm_config_info { - vol_u32 *base; /* base address of SHM */ - vol_u32 length; /* length (in bytes) of SHM */ - vol_u32 format; /* SHM is big or little endian */ - vol_u32 (*convert)();/* neutral conversion routine */ - vol_u32 poll_intr;/* POLLED or INTR driven mode */ - void (*cause_intr)( rtems_unsigned32 ); - Shm_Interrupt_information Intr; /* cause intr information */ -}; - -typedef struct shm_config_info shm_config_table; - -/* global variables */ - -#ifdef _SHM_INIT -#define SHM_EXTERN -#else -#define SHM_EXTERN extern -#endif - -SHM_EXTERN shm_config_table *Shm_Configuration; -SHM_EXTERN Shm_Interrupt_information *Shm_Interrupt_table; -SHM_EXTERN Shm_Node_status_control *Shm_Node_statuses; -SHM_EXTERN Shm_Locked_queue_Control *Shm_Locked_queues; -SHM_EXTERN Shm_Envelope_control *Shm_Envelopes; -SHM_EXTERN rtems_configuration_table *Shm_RTEMS_Configuration; -SHM_EXTERN rtems_multiprocessing_table *Shm_RTEMS_MP_Configuration; -SHM_EXTERN rtems_unsigned32 Shm_Receive_message_count; -SHM_EXTERN rtems_unsigned32 Shm_Null_message_count; -SHM_EXTERN rtems_unsigned32 Shm_Interrupt_count; -SHM_EXTERN rtems_unsigned32 Shm_Local_node; -SHM_EXTERN Shm_Locked_queue_Control *Shm_Local_receive_queue; -SHM_EXTERN Shm_Node_status_control *Shm_Local_node_status; -SHM_EXTERN rtems_unsigned32 Shm_isrstat; - /* reported by shmdr */ - -SHM_EXTERN rtems_unsigned32 Shm_Pending_initialization; -SHM_EXTERN rtems_unsigned32 Shm_Initialization_complete; -SHM_EXTERN rtems_unsigned32 Shm_Active_node; - -SHM_EXTERN rtems_unsigned32 Shm_Maximum_nodes; -SHM_EXTERN rtems_unsigned32 Shm_Maximum_envelopes; - -SHM_EXTERN rtems_unsigned32 Shm_Locked_queue_End_of_list; -SHM_EXTERN rtems_unsigned32 Shm_Locked_queue_Not_on_list; - -/* functions */ - -/* locked queue routines */ -void Shm_Locked_queue_Add( - Shm_Locked_queue_Control *, Shm_Envelope_control * ); -Shm_Envelope_control *Shm_Locked_queue_Get( Shm_Locked_queue_Control * ); -void Shm_Locked_queue_Initialize( - Shm_Locked_queue_Control *, rtems_unsigned32 ); - /* Shm_Initialize_lock is CPU dependent */ - /* Shm_Lock is CPU dependent */ - /* Shm_Unlock is CPU dependent */ - -/* portable routines */ -void Init_env_pool(); -void Shm_Print_statistics( void ); -void MPCI_Fatal( Internal_errors_Source, boolean, rtems_unsigned32 ); -rtems_task Shm_Cause_interrupt( rtems_unsigned32 ); -void Shm_Poll(); -void Shm_setclockvec(); -void Shm_Convert_packet( rtems_packet_prefix * ); - -/* CPU specific routines are inlined in shmcpu.h */ - -/* target specific routines */ -void *Shm_Convert_address( void * ); -void Shm_Get_configuration( rtems_unsigned32, shm_config_table ** ); -void Shm_isr(); -void Shm_setvec( void ); - -void Shm_Initialize_lock( Shm_Locked_queue_Control * ); -void Shm_Lock( Shm_Locked_queue_Control * ); -void Shm_Unlock( Shm_Locked_queue_Control * ); - -/* MPCI entry points */ -rtems_mpci_entry Shm_Get_packet( - rtems_packet_prefix ** -); - -rtems_mpci_entry Shm_Initialization( void ); - -rtems_mpci_entry Shm_Receive_packet( - rtems_packet_prefix ** -); - -rtems_mpci_entry Shm_Return_packet( - rtems_packet_prefix * -); - -rtems_mpci_entry Shm_Send_packet( - rtems_unsigned32, - rtems_packet_prefix * -); - -extern rtems_mpci_table MPCI_table; - -#ifdef _SHM_INIT - -/* multiprocessor communications interface (MPCI) table */ - -rtems_mpci_table MPCI_table = { - 100000, /* default timeout value in ticks */ - MAX_PACKET_SIZE, /* maximum packet size */ - Shm_Initialization, /* initialization procedure */ - Shm_Get_packet, /* get packet procedure */ - Shm_Return_packet, /* return packet procedure */ - Shm_Send_packet, /* packet send procedure */ - Shm_Receive_packet /* packet receive procedure */ -}; - -#endif - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ -- cgit v1.2.3