From db8f598d56951cf43f22a5e325e0d23c8f7559f9 Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Mon, 26 Apr 2021 14:00:41 +0200 Subject: build: Remove old build system Close #3250. Close #4081. --- c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac | 69 ------------------------ 1 file changed, 69 deletions(-) delete mode 100644 c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac (limited to 'c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac') diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac b/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac deleted file mode 100644 index b9bce068a6..0000000000 --- a/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac +++ /dev/null @@ -1,69 +0,0 @@ -## Process this file with autoconf to produce a configure script. - -AC_PREREQ([2.69]) -AC_INIT([rtems-c-src-lib-libbsp-powerpc-mpc8260ads],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) -RTEMS_TOP(../../../../../..) -RTEMS_SOURCE_TOP -RTEMS_BUILD_TOP -RTEMS_BSP_LINKCMDS - -RTEMS_CANONICAL_TARGET_CPU -AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) -RTEMS_BSP_CONFIGURE - - -RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[]) -RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED - -RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[]) -RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED - -RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0]) -RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS], -[Define to 1 if you want termios support for every port. - Termios support is independent of the choice of UART I/O mode.]) - -RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCC2_MINOR]) -RTEMS_BSPOPTS_HELP([CONSOLE_MINOR], -[(BSP--console driver) Must be defined to be one of SMC1_MINOR, - SMC2_MINOR, SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR. - Determines which device will be registered as /dev/console.]) - -RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0]) -RTEMS_BSPOPTS_HELP([UARTS_IO_MODE], -[(BSP--console driver) - Define to 0 or 1 if you want polled I/O performed by RTEMS. - Define to 1 if you want interrupt-driven performed by RTEMS. - Define to 2 if you want polled I/O performed by EPPCBug. - There is no provision to have a mix of interrupt-driven and polled I/O - ports, except that the printk port may use a different mode from the - other ports. If this is done, do not open the printk port from an RTEMS - application. With EPPCBug 1.1, if mode 2 is selected, CONSOLE_MINOR - must be set to SMC1_MINOR. This is a deficiency of the firmware: it - does not perform serial I/O on any port other than its default debug - port, which must be SMC1.]) - -RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SMC2_MINOR]) -RTEMS_BSPOPTS_HELP([PRINTK_MINOR], -[(BSP--console driver) - Must be defined to be one of SMC1_MINOR, SMC2_MINOR, SCC2_MINOR, - SCC3_MINOR, or SCC4_MINOR. Determines which device is used for output - by printk(). If the port that printk() uses is also used for other - I/O (e.g. if PRINTK_MINOR == \$CONSOLE_MINOR), then both ports should - use the same type of I/O, otherwise the drivers will likely conflict with - each other.]) - -RTEMS_BSPOPTS_SET([DISPATCH_HANDLER_STAT],[*],[]) -RTEMS_BSPOPTS_HELP([DISPATCH_HANDLER_STAT], -[used by irq/irq.c]) - -AC_DEFINE(mpc8260, 1, [PowerPC model option]) - -RTEMS_BSP_CLEANUP_OPTIONS - -# Explicitly list a Makefile here -AC_CONFIG_FILES([Makefile]) - -RTEMS_PPC_EXCEPTIONS - -AC_OUTPUT -- cgit v1.2.3