From eb36d1198cdf9dc1e2f776ef6e1e38755f6d13c5 Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Wed, 25 Apr 2018 15:06:08 +0200 Subject: bsps: Move documentation, etc. files to bsps This patch is a part of the BSP source reorganization. Update #3285. --- c/src/lib/libbsp/powerpc/motorola_powerpc/BOOTING | 92 ----------------------- 1 file changed, 92 deletions(-) delete mode 100644 c/src/lib/libbsp/powerpc/motorola_powerpc/BOOTING (limited to 'c/src/lib/libbsp/powerpc/motorola_powerpc/BOOTING') diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/BOOTING b/c/src/lib/libbsp/powerpc/motorola_powerpc/BOOTING deleted file mode 100644 index 16adda28df..0000000000 --- a/c/src/lib/libbsp/powerpc/motorola_powerpc/BOOTING +++ /dev/null @@ -1,92 +0,0 @@ -This file documents the on board monitor (PPCBUG) configuration used -to be able to boot the archives located in powerpc-rtems/c/mcp750/bin. -This information was provided by Eric Valette - -NOTE (by Till Straumann , 2003): -Apparently, PPCBug fails to shut down the network interface after -loading an image. This means that the ethernet chip is still able -to write into its descriptors and network buffer memory which -can result in the loaded system to be corrupted if that system -relocates itself!. The proper place to shut down the interface -would be PPCBug itself or a 'PPCBug startup script' - unfortunately, -PPCBug doesn't offer such a feature. Therefore, the bootloader -is by default compiled with the -#ifdef USE_PPCBUG -compile-time option ENABLED. It will then use a PPCBug system -call to shut down the ethernet chip during an early stage of -the boot process. -NOTE: THIS (i.e. the system call) WILL FAIL IF YOU USE SOFTWARE -OTHER THAN PPCBUG TO BOOT THE BSP. In such a case, you must -recompile with #undef USE_PPCBUG and make sure the ethernet -interface is quiet by other means. - ------------------------ ENV command-------------- -PPC1-Bug>env -Bug or System environment [B/S] = B? -Field Service Menu Enable [Y/N] = N? -Probe System for Supported I/O Controllers [Y/N] = Y? -Auto-Initialize of NVRAM Header Enable [Y/N] = Y? -Network PReP-Boot Mode Enable [Y/N] = Y? <==================== -SCSI Bus Reset on Debugger Startup [Y/N] = N? -Primary SCSI Bus Negotiations Type [A/S/N] = A? -Primary SCSI Data Bus Width [W/N] = N? -Secondary SCSI Identifier = "07"? -NVRAM Boot List (GEV.fw-boot-path) Boot Enable [Y/N] = Y? -NVRAM Boot List (GEV.fw-boot-path) Boot at power-up only [Y/N] = Y? -NVRAM Boot List (GEV.fw-boot-path) Boot Abort Delay = 5? -Auto Boot Enable [Y/N] = Y? -Auto Boot at power-up only [Y/N] = Y? -Auto Boot Scan Enable [Y/N] = Y? -Auto Boot Scan Device Type List = FDISK/CDROM/TAPE/HDISK/? -Auto Boot Controller LUN = 14? -Auto Boot Device LUN = 40? -Auto Boot Partition Number = 03? -Auto Boot Abort Delay = 7? -Auto Boot Default String [NULL for an empty string] = ? -ROM Boot Enable [Y/N] = N? -ROM Boot at power-up only [Y/N] = Y? -ROM Boot Abort Delay = 5? -ROM Boot Direct Starting Address = FFF00000? -ROM Boot Direct Ending Address = FFFFFFFC? -Network Auto Boot Enable [Y/N] = N? -Network Auto Boot at power-up only [Y/N] = N? -Network Auto Boot Controller LUN = 00? -Network Auto Boot Device LUN = 00? -Network Auto Boot Abort Delay = 5? -Network Auto Boot Configuration Parameters Offset (NVRAM) = 00001000? -Memory Size Enable [Y/N] = Y? -Memory Size Starting Address = 00000000? -Memory Size Ending Address = 02000000? -DRAM Speed in NANO Seconds = 60? -ROM First Access Length (0 - 31) = 10? -ROM Next Access Length (0 - 15) = 0? -DRAM Parity Enable [On-Detection/Always/Never - O/A/N] = O? -L2Cache Parity Enable [On-Detection/Always/Never - O/A/N] = O? -PCI Interrupts Route Control Registers (PIRQ0/1/2/3) = 0A050000? -Serial Startup Code Master Enable [Y/N] = N? -Serial Startup Code LF Enable [Y/N] = N? ----------------------NIOT --------------------------- -PPC1-Bug>niot -Controller LUN =00? -Device LUN =00? -Node Control Memory Address =03F9E000? -Client IP Address =194.2.81.157? -Server IP Address =194.2.81.241? -Subnet IP Address Mask =255.255.255.0? -Broadcast IP Address =255.255.255.255? -Gateway IP Address =194.2.81.254? -Boot File Name ("NULL" for None) =debug-ppc? -Argument File Name ("NULL" for None) =? -Boot File Load Address =001F0000? -Boot File Execution Address =001F0000? -Boot File Execution Delay =00000000? -Boot File Length =00000000? -Boot File Byte Offset =00000000? -BOOTP/RARP Request Retry =05? -TFTP/ARP Request Retry =05? -Trace Character Buffer Address =00000000? -BOOTP/RARP Request Control: Always/When-Needed (A/W)=W? -BOOTP/RARP Reply Update Control: Yes/No (Y/N) =Y? --------------------------------------------------------- - - -- cgit v1.2.3