From c717fda5c142dac4a7d304e9354d40d06e1ca278 Mon Sep 17 00:00:00 2001 From: Gedare Bloom Date: Mon, 6 Aug 2012 13:03:46 -0400 Subject: Revert "Add bspopts.h.in." This reverts commit daffa606cc4a45d93c1f0f4fe365fde0fda6acbb. Conflicts: c/src/lib/libbsp/arm/lpc24xx/include/bspopts.h.in c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in Manually deleted conflicting files. --- .../lib/libbsp/powerpc/mbx8xx/include/bspopts.h.in | 93 ---------------------- 1 file changed, 93 deletions(-) delete mode 100644 c/src/lib/libbsp/powerpc/mbx8xx/include/bspopts.h.in (limited to 'c/src/lib/libbsp/powerpc/mbx8xx/include') diff --git a/c/src/lib/libbsp/powerpc/mbx8xx/include/bspopts.h.in b/c/src/lib/libbsp/powerpc/mbx8xx/include/bspopts.h.in deleted file mode 100644 index 47d1b29142..0000000000 --- a/c/src/lib/libbsp/powerpc/mbx8xx/include/bspopts.h.in +++ /dev/null @@ -1,93 +0,0 @@ -/* include/bspopts.h.in. Generated from configure.ac by autoheader. */ - -/* enables the data cache, if defined to a value other than zero */ -#undef BSP_DATA_CACHE_ENABLED - -/* If defined, then the BSP Framework will put a non-zero pattern into the - RTEMS Workspace and C program heap. This should assist in finding code that - assumes memory starts set to zero. */ -#undef BSP_DIRTY_MEMORY - -/* enables the instruction cache, if defined to a value other than zero */ -#undef BSP_INSTRUCTION_CACHE_ENABLED - -/* If defined, print a message and wait until pressed before resetting board - when application exits. */ -#undef BSP_PRESS_KEY_FOR_RESET - -/* If defined, reset the board when the application exits. */ -#undef BSP_RESET_BOARD_AT_EXIT - -/* (BSP--console driver) Must be defined to be one of SMC1_MINOR, SMC2_MINOR, - SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR. Determines which device will be - registered as /dev/console. */ -#undef CONSOLE_MINOR - -/* used by irq/irq.c */ -#undef DISPATCH_HANDLER_STAT - -/* (BSP--console driver) If defined, SMC1 is in use by EPPC-Bug. The console - driver will not re-initialize that port. */ -#undef EPPCBUG_SMC1 - -/* (BSP--RTEMS) If defined, vectors branch to EPPCBug, except the following: - 0x500 (external interrupt), 0x900 (decrementer). */ -#undef EPPCBUG_VECTORS - -/* Define to 1 if you want the console driver, network driver and caches - configured at boot time from parameters stored in NVRAM. If set to 1, most - parameters below are ignored during the build. If not set to 1, then the - console driver is configured at build time, the network host information is - obtained from application supplied data structures, and the caches are - configured at boot time based on the information supplied in this file. */ -#undef NVRAM_CONFIGURE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* (BSP--console driver) Define to 0 or 1 if you want polled I/O performed by - RTEMS. Define to 2 if you want polled I/O performed by EPPCBug. The - printk() port is not configured to use termios. With EPPCBug 1.1, if mode 2 - is selected, PRINTK_MINOR must be set to SMC1_MINOR. This is a deficiency - of the firmware: it does not perform serial I/O on any port other than its - default debug port, which must be SMC1. Printk always uses polled output. - */ -#undef PRINTK_IO_MODE - -/* (BSP--console driver) Must be defined to be one of SMC1_MINOR, SMC2_MINOR, - SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR. Determines which device is used for - output by printk(). If the port that printk() uses is also used for other - I/O (e.g. if PRINTK_MINOR == \$CONSOLE_MINOR), then both ports should use - the same type of I/O, otherwise the drivers will likely conflict with each - other. */ -#undef PRINTK_MINOR - -/* (BSP--console driver) Define to 0 or 1 if you want polled I/O performed by - RTEMS. Define to 1 if you want interrupt-driven performed by RTEMS. Define - to 2 if you want polled I/O performed by EPPCBug. There is no provision to - have a mix of interrupt-driven and polled I/O ports, except that the printk - port may use a different mode from the other ports. If this is done, do not - open the printk port from an RTEMS application. With EPPCBug 1.1, if mode 2 - is selected, CONSOLE_MINOR must be set to SMC1_MINOR. This is a deficiency - of the firmware: it does not perform serial I/O on any port other than its - default debug port, which must be SMC1. */ -#undef UARTS_IO_MODE - -/* Define to 1 if you want termios support for every port. Termios support is - independent of the choice of UART I/O mode. */ -#undef UARTS_USE_TERMIOS -- cgit v1.2.3