From 5a4e3dc0a5af631b1723858bc50a9af1545392fb Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Mon, 23 Apr 2018 12:50:58 +0200 Subject: bsps: Move PCI drivers to bsps This patch is a part of the BSP source reorganization. Update #3285. --- .../lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h | 66 ---------------------- 1 file changed, 66 deletions(-) delete mode 100644 c/src/lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h (limited to 'c/src/lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h') diff --git a/c/src/lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h b/c/src/lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h deleted file mode 100644 index 533519a2ae..0000000000 --- a/c/src/lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef RTEMS_PCI_IO_REMAP_H -#define RTEMS_PCI_IO_REMAP_H -/* Reconfigure all I/O base address registers for a range of PCI busses - * (from and including 'bus_from' up to and not including 'bus_to'). - * adding an offset. This involves adjusting the base and limit registers - * of PCI-PCI bridges, too. - * - * RESTRICTIONS: 'offset' must be 4k aligned (PCI req.); no argument check - * on the bus numbers is done. - * - * RETURNS: 0 on success and a number > 0 indicating the number of - * non-32bit bridges found where the offset couldn't be added. - * Devices behind such a bridge are not accessible through I/O - * and should probably be switched off (not done by this code). - */ - -int -rtems_pci_io_remap(int bus_from, int bus_to, uint32_t offset); - -/* - * Authorship - * ---------- - * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was - * created by Till Straumann , 2005-2007, - * Stanford Linear Accelerator Center, Stanford University. - * - * Acknowledgement of sponsorship - * ------------------------------ - * The 'beatnik' BSP was produced by - * the Stanford Linear Accelerator Center, Stanford University, - * under Contract DE-AC03-76SFO0515 with the Department of Energy. - * - * Government disclaimer of liability - * ---------------------------------- - * Neither the United States nor the United States Department of Energy, - * nor any of their employees, makes any warranty, express or implied, or - * assumes any legal liability or responsibility for the accuracy, - * completeness, or usefulness of any data, apparatus, product, or process - * disclosed, or represents that its use would not infringe privately owned - * rights. - * - * Stanford disclaimer of liability - * -------------------------------- - * Stanford University makes no representations or warranties, express or - * implied, nor assumes any liability for the use of this software. - * - * Stanford disclaimer of copyright - * -------------------------------- - * Stanford University, owner of the copyright, hereby disclaims its - * copyright and all other rights in this software. Hence, anyone may - * freely use it for any purpose without restriction. - * - * Maintenance of notices - * ---------------------- - * In the interest of clarity regarding the origin and status of this - * SLAC software, this and all the preceding Stanford University notices - * are to remain affixed to any copy or derivative of this software made - * or distributed by the recipient and are to be affixed to any copy of - * software made or distributed by the recipient that contains a copy or - * derivative of this software. - * - * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03 - */ - -#endif - -- cgit v1.2.3