From ac7d5ef06a6d6e8d84abbd1f0b82162725f98326 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Thu, 11 May 1995 17:39:37 +0000 Subject: Initial revision --- c/src/lib/libbsp/m68k/mvme136/timer/timer.c | 108 ++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 c/src/lib/libbsp/m68k/mvme136/timer/timer.c (limited to 'c/src/lib/libbsp/m68k/mvme136/timer/timer.c') diff --git a/c/src/lib/libbsp/m68k/mvme136/timer/timer.c b/c/src/lib/libbsp/m68k/mvme136/timer/timer.c new file mode 100644 index 0000000000..8c3ecd45f2 --- /dev/null +++ b/c/src/lib/libbsp/m68k/mvme136/timer/timer.c @@ -0,0 +1,108 @@ +/* Timer_init() + * + * This routine initializes the Z8036 timer on the MVME136 board. + * + * Input parameters: NONE + * + * Output parameters: NONE + * + * NOTE: This routine will not work if the optimizer is enabled + * for some compilers. The multiple writes to the Z8036 + * may be optimized away. + * + * It is important that the timer start/stop overhead be + * determined when porting or modifying this code. + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * $Id$ + */ + + +#include +#include +#include + +#define TIMER 0xfffb0000 /* address of Z8036 on MVME136 */ + +int Ttimer_val; +rtems_boolean Timer_driver_Find_average_overhead; + +rtems_isr timerisr(); + +void Timer_initialize() +{ + (void) set_vector( timerisr, 66, 0 ); /* install ISR */ + + Ttimer_val = 0; /* clear timer ISR count */ + Z8x36_WRITE( TIMER, MASTER_INTR, 0x01 ); /* reset */ + Z8x36_WRITE( TIMER, MASTER_INTR, 0x00 ); /* clear reset */ + Z8x36_WRITE( TIMER, MASTER_INTR, 0xe2 ); /* disable lower chain, no vec */ + /* set right justified addr */ + /* and master int enable */ + Z8x36_WRITE( TIMER, CT1_MODE_SPEC, 0x80 ); /* T1 continuous, and */ + /* cycle/pulse output */ + + *((rtems_unsigned16 *)0xfffb0016) = 0x0000; /* write countdown value */ +/* + Z8x36_WRITE( TIMER, CT1_TIME_CONST_MSB, 0x00 ); + Z8x36_WRITE( TIMER, CT1_TIME_CONST_LSB, 0x00 ); +*/ + Z8x36_WRITE( TIMER, MASTER_CFG, 0xc4 ); /* enable timer1 */ + + Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0xc6 ); /* set INTR enable (IE), */ + /* trigger command */ + /* (TCB) and gate */ + /* command (GCB) bits */ + *((rtems_unsigned8 *)0xfffb0038) &= 0xfd; /* enable timer INTR on */ + /* VME controller */ +} + +#define AVG_OVERHEAD 6 /* It typically takes 3.0 microseconds */ + /* (6 countdowns) to start/stop the timer. */ +#define LEAST_VALID 10 /* Don't trust a value lower than this */ + +int Read_timer() +{ +/* + rtems_unsigned8 msb, lsb; +*/ + rtems_unsigned32 remaining, total; + + Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0xce ); /* read the counter value */ +remaining = 0xffff - *((rtems_unsigned16 *) 0xfffb0010); +/* + Z8x36_READ( TIMER, CT1_CUR_CNT_MSB, msb ); + Z8x36_READ( TIMER, CT1_CUR_CNT_LSB, lsb ); + + remaining = 0xffff - ((msb << 8) + lsb); +*/ + total = (Ttimer_val * 0x10000) + remaining; + + if ( Timer_driver_Find_average_overhead == 1 ) + return total; /* in one-half microsecond units */ + + else { + if ( total < LEAST_VALID ) + return 0; /* below timer resolution */ + return (total-AVG_OVERHEAD) >> 1; + } +} + +rtems_status_code Empty_function( void ) +{ + return RTEMS_SUCCESSFUL; +} + +void Set_find_average_overhead( + rtems_boolean find_flag +) +{ + Timer_driver_Find_average_overhead = find_flag; +} -- cgit v1.2.3