From f2ab5bc5943e1817540804117c4626151759681c Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Sat, 23 Jan 2016 17:56:18 -0600 Subject: Remove m68k/idp BSP closes #2546. --- c/src/lib/libbsp/m68k/idp/console/leds.c | 81 -------------------------------- 1 file changed, 81 deletions(-) delete mode 100644 c/src/lib/libbsp/m68k/idp/console/leds.c (limited to 'c/src/lib/libbsp/m68k/idp/console/leds.c') diff --git a/c/src/lib/libbsp/m68k/idp/console/leds.c b/c/src/lib/libbsp/m68k/idp/console/leds.c deleted file mode 100644 index d2478c5d84..0000000000 --- a/c/src/lib/libbsp/m68k/idp/console/leds.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * leds.c -- control the led's on a Motorola mc68ec0x0 board. - * Written by rob@cygnus.com (Rob Savoye) - */ -#include "leds.h" - -void zylons(void); -void clear_leds(void); - -/* - * led_putnum -- - * print a hex number on the LED. the value of num must be a char with - * the ascii value. ie... number 0 is '0', a is 'a', ' ' (null) clears - * the led display. - * Setting the bit to 0 turns it on, 1 turns it off. - * the LED's are controlled by setting the right bit mask in the base - * address. - * The bits are: - * [d.p | g | f | e | d | c | b | a ] is the byte. - * - * The locations are: - * - * a - * ----- - * f | | b - * | g | - * ----- - * | | - * e | | c - * ----- - * d . d.p (decimal point) - */ -void -led_putnum ( char num ) -{ - static unsigned char *leds = (unsigned char *)LED_ADDR; - static unsigned char num_bits [18] = { - 0xff, /* clear all */ - 0xc0, 0xf9, 0xa4, 0xb0, 0x99, 0x92, 0x82, 0xf8, 0x80, 0x98, /* numbers 0-9 */ - 0x98, 0x20, 0x3, 0x27, 0x21, 0x4, 0xe /* letters a-f */ - }; - - if (num >= '0' && num <= '9') - num = (num - '0') + 1; - - if (num >= 'a' && num <= 'f') - num = (num - 'a') + 12; - - if (num == ' ') - num = 0; - - *leds = num_bits[(int)num]; -} - -/* This procedure added by Doug McBride, Colorado Space Grant College -- - Probably should be a macro instead */ -void -clear_leds ( ) -{ - static unsigned char *leds = (unsigned char *)LED_ADDR; - *leds = 0xFF; -} - -void rtems_bsp_delay( int ); - -/* - * zylons -- draw a rotating pattern. NOTE: this function never returns. - */ -void -zylons() -{ - unsigned char *leds = (unsigned char *)LED_ADDR; - unsigned char curled = 0xfe; - - while (1) - { - *leds = curled; - curled = (curled >> 1) | (curled << 7); - rtems_bsp_delay ( 8000 ); - } -} -- cgit v1.2.3