From 98bcbda39d69a1034a7ad44526a702bbb3b35b0c Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Mon, 23 Mar 1998 18:35:41 +0000 Subject: Patches from Eric Norum: Here are some patches to the gen68360 BSP. The improvements include: Boot prom run-time selection of DRAM size (1/4/16 Mbytes) Full 32-bit ethernet address obtained from boot prom. Updated README. --- c/src/lib/libbsp/m68k/gen68360/startup/linkcmds | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'c/src/lib/libbsp/m68k/gen68360/startup/linkcmds') diff --git a/c/src/lib/libbsp/m68k/gen68360/startup/linkcmds b/c/src/lib/libbsp/m68k/gen68360/startup/linkcmds index 938281ca46..132eafa35d 100644 --- a/c/src/lib/libbsp/m68k/gen68360/startup/linkcmds +++ b/c/src/lib/libbsp/m68k/gen68360/startup/linkcmds @@ -17,15 +17,11 @@ * number used there is not constant. If this happens to you, edit * the lines marked XXX below to use a constant value. */ -RamSize = DEFINED(RamSize) ? RamSize : 4M; HeapSize = DEFINED(HeapSize) ? HeapSize : 0x10000; StackSize = DEFINED(StackSize) ? StackSize : 0x1000; /* * Declare on-board memory. - * It would be nice if the ram length could be given as - * LENGTH=RamSize, but gld doesn't allow non-constant - * values in the LENGTH expression. */ MEMORY { ram : ORIGIN = 0x00000000, LENGTH = 64M @@ -33,21 +29,10 @@ MEMORY { dpram : ORIGIN = 0x0E000000, LENGTH = 8k } -/* - * Declare low-order three octets of Ethernet address. - */ -ETHERNET_ADDRESS = DEFINED(ETHERNET_ADDRESS) ? ETHERNET_ADDRESS : 0xDEAD12; - /* * Load objects */ SECTIONS { - /* - * Hardware variations - */ - _RamSize = RamSize; - __RamSize = RamSize; - /* * Boot PROM */ -- cgit v1.2.3