From 6693a68ffa99bfba4a7a8bd57337bf21c550fb1e Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Mon, 26 Jul 1999 20:00:37 +0000 Subject: This is part of a major patch from Ralf Corsepius to move RTEMS more to automake/autoconf and GNU compliance. Finally, here they are: the "big-patch" patches - merged into one big patch (~1.5MB). Sorry for the delay, but testing took much more time than I had expected - esp. reworking the acpolish script triggered many more tiny issues than I had expected (cf. below). At least, now you've got something to spend your weekend with :-. WARNINGS: * I've gone a little (??) further than I had announced before. * Several directories have been moved. * Several files have been added and removed * I have tested it with many BSPs/CPUs and a variety of permutiations of configuration flags, but not with all. * Most parts of the patch are automatically generated, however there are many tiny manual modifications. APPLYING THE PATCH: ./autogen -c mkdir tools mv c/src/exec/score/tools tools/cpu mv c/build-tools tools/build mv c/update-tools tools/update patch -p1 -E < rtems-rc-19990709-0.diff ./autogen If the patch doesn't apply to rtems-cvs, I would suggest that you should try to apply it brute-force and then to run tools/update/rtems-polish.sh -ac -am afterwards. A recursive diff between rtems-19990709 + patch and rtems-cvs + patch then should report only a few dozen significant changes to configuration files which need to be merged manually (IIRC, I did not change any source files). *** Attention: There are files to be removed, moved, copied and added in/to CVS! NEWS/CHANGES: 1. Configuration takes place in 3 stages: 1. per host (toplevel configure script), 2. per target (c/configure), 3. per bsp c/src/configure automatically triggered from ./configure and c/Makefile.am. 2. Building of subdirectory c/ takes place in c/$(target_alias) for cross-targets in c/ for native targets 3. Building of subdirectory c/src takes place in c/${target_alias}/ for cross-targets, c/ for native targets 4. c/build-tools moved to tools/build 5. c/src/exec/score/cpu/tools moved to tools/cpu (=cpu-tools split out) 6. c/update-tools moved to tools/update 7. New subdirectory c/src/make, handles files from make/ on a per BSP basis 8. Maintainer mode support: Ie. if configuring with --enable-maintainer-mode disabled (the default), then tracking of many dependencies will be disabled in Makefiles. Esp. many dependencies for auto* generated files will be switched off in Makefiles. Ie. if not using "--enable-maintainer-mode" many auto* generated files will not be updated automatically, i.e. normal users should not be required to have auto* tools anymore (untested). 9. Independent configuration scripts for / (toplevel), tools/build, tools/cpu, tools/update, c/, c/src/, c/src/exec, c/src/lib, c/src/tests, c/src/make 10. Automake support for all directories above and besides c/src 11. "preinstall" now is implemented as depth-first recursive make target 12. host compiled tools (exception bsp-tools) are accessed in location in the build tree instead of inside the build-tree when building RTEMS. 13. RTEMS_ROOT and PROJECT_ROOT now point to directories inside the build-tree - many tiny changes as consequence from this. 14. --with-cross-host support removed (offically announced obsolete by cygnus) 15. Changing the order of building libraries below c/src/lib/ 16. Former toplevel configure script broken into aclocal/*.m4 macros 17. Newlib now detected by configure macros, RTEMS_HAS_NEWLIB removed from *cfg. 18. sptables.h now generated by autoconf 19. Rules for "mkinstalldirs temporary installation tree" moved from c/Makefile to subdirectories. 20. Cpu-tools do not get installed. 21. FIX: Use ACLOCAL_AMFLAGS instead of ACLOCAL = -I ... in Makefile.ams which are in directories with own configure scripts. 22. Hardcoding BSP names into libbsp/.../tools to avoid RTEMS_BSP get overridden from the environment. 22. FIX: Handling of MP_PIECES in various Makefiles 23. FIX: Removing "::" rules from some Makefile.ins 24. FIX: File permission chaos: (-m 444 and -m 555 vs. -m 644 and -m 755) - Now all include files use -m 644. 25. Removed many gnumake-conditionals in Makefile.ins - Partially replaced with automake-conditional, partially replaced with conditionalized Makefile variables (... _yes_V) 26. Massively reworked acpolish: acpolish now parses Makefile.ins and interprets parts of the Makefile.ins. 27. FIX: Some $(wildcard $(srcdir)/*.h) macros removed / replaced with explicit lists of files in Makefile.ins. 28. FIX: Replacing MKLIB with RANLIB in Makefile.ins 29. HACK: Add preinstallation for pc386 specific $(PROJECT_RELEASE)/BootImgs directory ... many more details, I can't recall KNOWN BUGS: 1. make [debug|profile]_install do not do what they are promissing. "make [debug|profile] install" does what "make [debug|profile]_install" has been doing. Proposal: remove [debug|profile]_install 2. Dependencies between temporary installation tree and source tree are not yet handled correctly. 3. Dependencies between temporary installation tree and source tree are handled ineffencently (Using INSTALL_CHANGE instead of make dependencies) 4. RTEMS_ROOT, PROJECT_ROOT, top_builddir, RTEMS_TOPdir now are redundant. 5. The new configure scripts still are in their infancy. They contain redundant checks and might still contain bugs, too. 6. RTEMS autoconf Makefile.ins use a mixture of configuration information gathered in c/$(target_alias)//make and of information collected from their configure scripts. 7. make dist is not fully functional 8. Subdirectory host-/build-/target- configure options (--target, --host, --build) do not conform to Cygnus/GNU conventions. 9. Some RTEMS autoconf Makefile.in's makefile targets are not supported in automake Makefile.ams/ins (e.g. get, clobber). 10. Some automake standard targets are not propagated from toplevel and c/Makefile.am to autoconf subdirectories (eg. make dist). 11. rpcgen generated files are not part of the source-tree (Automake conventions favor supplying generated files inside the source-tree, however there is no support for rpcgen generated files in automake, cf. yacc/lex support in automake). 12. RTEMS_HAS_RDBG handling is flaky. make/*.cfg use RTEMS_HAS_RDBG per CPU, while librdb's sources can only be built per BSP. Raises the more general question whether librdbg located correctly in the source-tree. 13. All make/*cfg files are configured per cpu, currently there is no location to store per-bsp configuration information --> bsp.cfg, per aconfig.h? 14. "make install" without having run "make all" beforehand does not work. 15. handling of --enable-multiprocessing seems to be broken in make/custom/* 16. Makefile.ins still exploit many gmake features. 17. File permisson chaos on libraries (no explict -m for libraries/rels/etc). 18. mcp750 Makefiles are broken (Note: I *do* mean buggy - I am not talking about "not-conforming to conventions", here :-). 19. Dependencies between configure scripts are not handled, eg. aborting "make RTEMS_BSP=" can leave the build-tree in an unusable state. 20. "make clean" does not delete /. This is intentional for now, because rerunning "make" after "make clean" requires an explicit "make preinstall" afterwards now. This should be done automatically, but doesn't work in this case for now. To work around this problem / is kept during "make clean" for now (HACK). TODO: 1. split out host-compiled bsp-tools 2. Use Cygnus/GNU standards for cross-compiling target-subdir (CC=CC_FOR_TARGET .. configure --host=${target_alias} --build=`config.guess'}), to be added to toplevel configure script after splitting out bsp-tools. 3. Exploit per cpu support directory (c/src/)- Splitting out per-cpu libraries - Are there any? 4. Further automake support 5. Converting subdirectories into standalone / self-contained subdirectories (Esp. moving their headers to the same common root as their sources, eg. mv lib/include/rtems++ lib/librtems++/include/rtems++) - This is the main obstacle which prevents moving further towards automake. 6. Propagating values from *.cfg into Makefiles instead of propagating them at make time via Makefile-fragments (i.e. try to avoid using *.cfg). 7. Testing on cygwin host (I *do* expect cygwin specific problems). 8. The ARCH in o-$(ARCH)-$(VARIANT) build-subdirectories is not needed anymore. GENERAL ISSUES: 1. Temporary installation tree -- Ian and I seem to disagree basically. Though I think that I understand his argumentation, I do not share it. IMO, his way of using the buildtree is mis-using the build-tree, relying on an inofficial feature of RTEMS's current implementation, which doesn't even work correctly in the current build-tree, though it attempts hard to do so. From my very POV, it unnecessarily complicates the structures of the source- and build-trees. It is not supported by automake (No automatic generation for the necessary rules) and complicates the transition to automake significantly (Generating the rules with an enhanced version of acpolish could be possible). As Ian correctly pointed out, here a management decision is needed - though I don't see the need to draw this decision in short terms. 2. preinstallation generally is a sure means to spoil the structure of the source tree, IMHO (No ranting intended, I am completly serious about this one). eg. through tree dependencies. The worst problem related to this I have found in the meantime is bsp_specs. bsp_specs is part of libbsp, ie. there is *no* way to build *any* part of the source tree *without* having a BSP *preinstalled*. Note: This issue is related to issue 1., but is not identical - The difference is the change of the order make rules have to be triggered. While preinstallation triggers rules spread all over the source tree before a "make all" can be run, a temporary installation tree could also be installed by post "make all" hooks (all-local:, to be run after make all in a directory is completed) if the directories' dependencies would be a tree, 3. Stuctural dependencies between subdirectories. 4. Depth of the source tree (Prevents multilibbing and introduces many unnecessary configure scripts). 5. per cpu vs. per bsp configuration (There are no real per-cpu parts yets :-). 6. automake does not support $makefiles in AC_OUTPUT. Unlike before, we now should try to avoid RTEMS_CHECK_MAKEFILE and to hard-code as much paths to Makefiles as possible. 7. General redesign of the source tree 8. Main installation point - Changing it to ${prefix}/${target_alias}. ? Besides item 8. (which is a must, IMHO), as far as I see most of them can not be solved soon and will remain issues in the mid- to long-term :-. REMARKS: * You (as the maintainer) should always use --enable-maintainer-mode when building RTEMS to ensure that maintainer mode generated files (esp. those in c/src/make) will be updated when make/* files have changed. * Use @RTEMS_BSP@ in Makefile.ins and Makefile.ams below c/src/, $(RTEMS_BSP) or ${RTEMS_BSP} will be overridden from environment variables when using make RTEMS_BSP="....". * c/src/make is a temporary cludge until configuration issues are solved. At the moment it is configured per bsp, but contains per-target/cpu info only. Its main purpose now is to circumvent modifying make/*.cfg files, because I consider make/* to be frozen for backward compatibilty. * This patch should only affect configuration files. At least I do not remember having touched any source files. * To build the bare bsp you now need to mention it in --enable-rtemsbsp. Example: building gensh1 and sh1/bare simultaneously: ../rtems-rc-19990709-1/configure --target=sh-rtems \ --enable-rtemsbsp="bare gensh1" \ --prefix=/tmp/rtems \ --enable-bare-cpu-cflags='-DMHZ=20 -m1 -DCPU_CONSOLE_DEVNAME=\"/dev/null\"' \ --enable-bare-cpu-model=sh7032 \ --enable-maintainer-mode \ --enable-cxx make make install * The next steps in development would be to split out bsp-tools and then to change to Cygnus/GNU canonicalization conventions for building the c/ subdirectory afterwards (i.e. many standard AC_*.m4 macros could be used instead of customized versions) FINAL REMARK: The issues mentioned in the lists above sound much worser than the situation actually is. Most of them are not specific to this patch, but are also valid for the snapshot. I just wrote down what I came across when working on the patch over the last few weeks. I wouldn't be too surprised if you don't like the patch at the current point in development. I am willing to discuss details and problems, I also have no problem if you would post-pone applying this patch to times after 4.1, but rejecting it as a whole for all times would be a false management decision, IMHO. Therefore I would suggest that you, if your time constaints allow it, should at least play a little while with this patch to understand what is going on and before drawing a decision on how to handle this proposal. I know this patch is neither perfect nor complete, but I consider it to be a major breakthrough. Don't be anxious because of the size of the patch, the core of the patch is rather small, the size is mainly the side effect of some systematic cleanups inside the Makefiles (result of acpolish). Feel free to ask if you encounter problems, if you don't understand something or if you meet bugs - I am far from being perfect and am prepared to answer them. Ralf. -- Ralf Corsepius Forschungsinstitut fuer Anwendungsorientierte Wissensverarbeitung (FAW) Helmholtzstr. 16, 89081 Ulm, Germany Tel: +49/731/501-8690 mailto:corsepiu@faw.uni-ulm.de FAX: +49/731/501-999 http://www.faw.uni-ulm.de --- c/src/lib/libbsp/i386/Makefile.in | 16 +- c/src/lib/libbsp/i386/force386/Makefile.in | 16 +- c/src/lib/libbsp/i386/force386/clock/Makefile.in | 42 +- c/src/lib/libbsp/i386/force386/console/Makefile.in | 42 +- c/src/lib/libbsp/i386/force386/include/Makefile.in | 28 +- c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in | 42 +- c/src/lib/libbsp/i386/force386/start/Makefile.in | 48 +-- c/src/lib/libbsp/i386/force386/startup/Makefile.in | 55 +-- c/src/lib/libbsp/i386/force386/timer/Makefile.in | 48 +-- c/src/lib/libbsp/i386/force386/wrapup/Makefile.in | 53 +-- c/src/lib/libbsp/i386/go32/Makefile.in | 16 +- c/src/lib/libbsp/i386/go32/clock/Makefile.in | 42 +- c/src/lib/libbsp/i386/go32/console/Makefile.in | 42 +- c/src/lib/libbsp/i386/go32/include/Makefile.in | 28 +- c/src/lib/libbsp/i386/go32/startup/Makefile.in | 42 +- c/src/lib/libbsp/i386/go32/timer/Makefile.in | 48 +-- c/src/lib/libbsp/i386/go32/wrapup/Makefile.in | 44 ++- c/src/lib/libbsp/i386/i386ex/Makefile.in | 16 +- c/src/lib/libbsp/i386/i386ex/clock/Makefile.in | 48 +-- c/src/lib/libbsp/i386/i386ex/console/Makefile.in | 52 +-- c/src/lib/libbsp/i386/i386ex/include/Makefile.in | 30 +- c/src/lib/libbsp/i386/i386ex/network/Makefile.in | 48 +-- c/src/lib/libbsp/i386/i386ex/start/Makefile.in | 52 ++- c/src/lib/libbsp/i386/i386ex/startup/Makefile.in | 60 +-- c/src/lib/libbsp/i386/i386ex/timer/Makefile.in | 48 +-- c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in | 44 ++- c/src/lib/libbsp/i386/pc386/3c509/Makefile.in | 42 +- c/src/lib/libbsp/i386/pc386/Makefile.in | 17 +- c/src/lib/libbsp/i386/pc386/clock/Makefile.in | 42 +- c/src/lib/libbsp/i386/pc386/console/Makefile.in | 48 +-- c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in | 42 +- c/src/lib/libbsp/i386/pc386/include/Makefile.in | 31 +- c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in | 42 +- c/src/lib/libbsp/i386/pc386/start/Makefile.in | 54 ++- c/src/lib/libbsp/i386/pc386/startup/Makefile.in | 58 +-- c/src/lib/libbsp/i386/pc386/timer/Makefile.in | 48 +-- c/src/lib/libbsp/i386/pc386/tools/Makefile.am | 10 +- c/src/lib/libbsp/i386/pc386/tools/Makefile.in | 29 +- c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 | 89 ++++- c/src/lib/libbsp/i386/pc386/tools/configure | 140 +++++-- c/src/lib/libbsp/i386/pc386/tools/configure.in | 4 + c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in | 42 +- c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in | 53 ++- c/src/lib/libbsp/i386/shared/Makefile.in | 16 +- c/src/lib/libbsp/i386/shared/comm/Makefile.in | 26 +- c/src/lib/libbsp/i386/shared/io/Makefile.in | 26 +- c/src/lib/libbsp/i386/shared/irq/Makefile.in | 28 +- c/src/lib/libbsp/i386/shared/pci/Makefile.in | 26 +- c/src/lib/libbsp/i386/ts_386ex/Makefile.in | 18 +- c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in | 52 +-- c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in | 54 +-- c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in | 32 +- c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in | 46 +-- c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in | 54 ++- c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in | 64 +-- c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in | 50 +-- c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in | 427 ++++++++++++++++++++- .../i386/ts_386ex/tools/ts_1325_ada/Makefile | 41 -- .../libbsp/i386/ts_386ex/tools/ts_1325_ada/README | 10 + c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in | 50 +-- 60 files changed, 1743 insertions(+), 1118 deletions(-) delete mode 100644 c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile create mode 100644 c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/README (limited to 'c/src/lib/libbsp/i386') diff --git a/c/src/lib/libbsp/i386/Makefile.in b/c/src/lib/libbsp/i386/Makefile.in index f9829549db..63474735c5 100644 --- a/c/src/lib/libbsp/i386/Makefile.in +++ b/c/src/lib/libbsp/i386/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../.. -subdir = c/src/lib/libbsp/i386 +top_builddir = ../.. +subdir = libbsp/i386 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=shared $(RTEMS_BSP_FAMILY) +SUB_DIRS = shared $(RTEMS_BSP_FAMILY) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/Makefile.in b/c/src/lib/libbsp/i386/force386/Makefile.in index aaa5ee3422..bf69c6d0bd 100644 --- a/c/src/lib/libbsp/i386/force386/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/force386 +top_builddir = ../../.. +subdir = libbsp/i386/force386 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the multiprocessing support if HAS_MP was defined MP_SUPPORT_yes_V = shmsupp MP_SUPPORT = $(MP_SUPPORT_$(HAS_MP)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start startup clock console $(MP_SUPPORT) timer wrapup +SUB_DIRS = include start startup clock console $(MP_SUPPORT) timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/clock/Makefile.in b/c/src/lib/libbsp/i386/force386/clock/Makefile.in index 58f187f2c9..dfea79f59c 100644 --- a/c/src/lib/libbsp/i386/force386/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/clock +top_builddir = ../../../.. +subdir = libbsp/i386/force386/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/console/Makefile.in b/c/src/lib/libbsp/i386/force386/console/Makefile.in index 1e8270cf0b..588289939b 100644 --- a/c/src/lib/libbsp/i386/force386/console/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/console +top_builddir = ../../../.. +subdir = libbsp/i386/force386/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/include/Makefile.in b/c/src/lib/libbsp/i386/force386/include/Makefile.in index 82eeb58100..b1db22952d 100644 --- a/c/src/lib/libbsp/i386/force386/include/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/include +top_builddir = ../../../.. +subdir = libbsp/i386/force386/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in b/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in index e77d97defc..b51bd468f1 100644 --- a/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/shmsupp/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/shmsupp +top_builddir = ../../../.. +subdir = libbsp/i386/force386/shmsupp -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/shmsupp.rel +PGM = ${ARCH}/shmsupp.rel # C source names, if any, go here -- minus the .c -C_PIECES=addrconv getcfg lock mpisr -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = addrconv getcfg lock mpisr +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/start/Makefile.in b/c/src/lib/libbsp/i386/force386/start/Makefile.in index 3b00303900..b7fa02604b 100644 --- a/c/src/lib/libbsp/i386/force386/start/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/start/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/start +top_builddir = ../../../.. +subdir = libbsp/i386/force386/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -57,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/startup/Makefile.in b/c/src/lib/libbsp/i386/force386/startup/Makefile.in index ec2ec33a7c..38b09f1e7e 100644 --- a/c/src/lib/libbsp/i386/force386/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/startup/Makefile.in @@ -5,47 +5,54 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/startup +top_builddir = ../../../.. +subdir = libbsp/i386/force386/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \ + gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=ldsegs -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = ldsegs +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -59,11 +66,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/timer/Makefile.in b/c/src/lib/libbsp/i386/force386/timer/Makefile.in index 55c3e397bf..fe43b26d08 100644 --- a/c/src/lib/libbsp/i386/force386/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/timer +top_builddir = ../../../.. +subdir = libbsp/i386/force386/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in b/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in index 6b46a3a0d6..19f56bdcea 100644 --- a/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/force386/wrapup/Makefile.in @@ -5,43 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/force386/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/force386/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg -ifeq ($(HAS_MP),yes) -GENERIC_PIECES += shmdr -BSP_PIECES += shmsupp -endif +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + +GENERIC_MP_REL_PIECES_yes_V = shmdr +GENERIC_MP_REL_PIECES_no_V = +GENERIC_PIECES += $(GENERIC_MP_REL_PIECES_$(HAS_MP)_V) + +BSP_MP_O_PIECES_yes_V = shmsupp +BSP_MP_O_PIECES_no_V = +BSP_PIECES += $(BSP_MP_O_PIECES_$(HAS_MP)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,12 +61,12 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/Makefile.in b/c/src/lib/libbsp/i386/go32/Makefile.in index 070b272eb4..43915fd52f 100644 --- a/c/src/lib/libbsp/i386/go32/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/Makefile.in @@ -5,23 +5,23 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/go32 +top_builddir = ../../.. +subdir = libbsp/i386/go32 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include startup clock console timer wrapup +SUB_DIRS = include startup clock console timer wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/clock/Makefile.in b/c/src/lib/libbsp/i386/go32/clock/Makefile.in index ff4b996ca3..2db5025e37 100644 --- a/c/src/lib/libbsp/i386/go32/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/clock +top_builddir = ../../../.. +subdir = libbsp/i386/go32/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit rtc -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit rtc +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/console/Makefile.in b/c/src/lib/libbsp/i386/go32/console/Makefile.in index d7506981a9..3c6c05e591 100644 --- a/c/src/lib/libbsp/i386/go32/console/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/console/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/console +top_builddir = ../../../.. +subdir = libbsp/i386/go32/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console inch outch -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console inch outch +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/include/Makefile.in b/c/src/lib/libbsp/i386/go32/include/Makefile.in index fbb1ea477a..86e8b43132 100644 --- a/c/src/lib/libbsp/i386/go32/include/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/include +top_builddir = ../../../.. +subdir = libbsp/i386/go32/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/startup/Makefile.in b/c/src/lib/libbsp/i386/go32/startup/Makefile.in index ff1a52288d..9303f2e59d 100644 --- a/c/src/lib/libbsp/i386/go32/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/startup/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/startup +top_builddir = ../../../.. +subdir = libbsp/i386/go32/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../../shared -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bsplibc bsppost bspstart sbrk setvec gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bsplibc bsppost bspstart sbrk setvec gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -54,11 +54,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/timer/Makefile.in b/c/src/lib/libbsp/i386/go32/timer/Makefile.in index 9aa332ce0c..dd36472983 100644 --- a/c/src/lib/libbsp/i386/go32/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/timer +top_builddir = ../../../.. +subdir = libbsp/i386/go32/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in b/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in index 7ce95fed37..2828605720 100644 --- a/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/go32/wrapup/Makefile.in @@ -5,38 +5,40 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/go32/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/go32/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer -GENERIC_PIECES= +BSP_PIECES = startup clock console timer +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -51,14 +53,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/Makefile.in b/c/src/lib/libbsp/i386/i386ex/Makefile.in index a151e88656..435d90939b 100644 --- a/c/src/lib/libbsp/i386/i386ex/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex +top_builddir = ../../.. +subdir = libbsp/i386/i386ex -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = network NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start startup clock console timer $(NETWORK) wrapup +SUB_DIRS = include start startup clock console timer $(NETWORK) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in b/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in index b03311d9c9..8353cf4131 100644 --- a/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/clock +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/console/Makefile.in b/c/src/lib/libbsp/i386/i386ex/console/Makefile.in index c9d92930e4..898e8a5257 100644 --- a/c/src/lib/libbsp/i386/i386ex/console/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/console/Makefile.in @@ -5,48 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/console +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel -IMPORT_SRC=$(srcdir)/../../shared/io/printk.c +IMPORT_SRC = $(srcdir)/../../shared/io/printk.c # C source names, if any, go here -- minus the .c -C_PIECES=console printk -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console printk +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CFLAGS += +DEFINES += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -58,17 +58,17 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: +preinstall: ${CP} ${IMPORT_SRC} . ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} preinstall $(SRCS) $(PGM) +all: ${ARCH} preinstall $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/include/Makefile.in b/c/src/lib/libbsp/i386/i386ex/include/Makefile.in index 5457f970ce..6b6742c5ee 100644 --- a/c/src/lib/libbsp/i386/i386ex/include/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/include +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,20 +25,28 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/network/Makefile.in b/c/src/lib/libbsp/i386/i386ex/network/Makefile.in index c070558e4e..0ea5a66e64 100644 --- a/c/src/lib/libbsp/i386/i386ex/network/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/network/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/network +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/network -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/network.rel +PGM = ${ARCH}/network.rel # C source names, if any, go here -- minus the .c -C_PIECES=network -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = network +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .s -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.s) +S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += -O0 +CFLAGS += -O0 -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/start/Makefile.in b/c/src/lib/libbsp/i386/i386ex/start/Makefile.in index 2a102f9e94..cf782cefcb 100644 --- a/c/src/lib/libbsp/i386/i386ex/start/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/start/Makefile.in @@ -5,52 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/start +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ - -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -ifeq ($(RTEMS_GAS_CODE16),yes) -DEFINES += -DNEW_GAS -endif +@RTEMS_GAS_CODE16_TRUE@CPPFLAGS += -DNEW_GAS CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -62,12 +58,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in b/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in index 46219dd8a3..c0c86d4cae 100644 --- a/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/startup/Makefile.in @@ -5,51 +5,59 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/startup +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/comm:@srcdir@/../../shared/irq:@srcdir@/../../shared/io +VPATH = \ + @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/comm:@srcdir@/../../shared/irq:@srcdir@/../../shared/io -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk irq irq_init i386-stub-glue uart i386-stub gnatinstallhandler +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk irq irq_init \ + i386-stub-glue uart i386-stub gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S # removed initcsu piece, ldsegs piece and flush -S_PIECES=irq_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = irq_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # #DEFINES += -DPRINTON -DEFINES += -I$(srcdir) -DBSP_IS_I386EX=1 +DEFINES += -I$(srcdir) -DBSP_IS_I386EX=1 CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -63,12 +71,12 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in b/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in index 66a53db647..312261a8f5 100644 --- a/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/timer +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in b/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in index 3ac2a219c3..3a6bd73ae4 100644 --- a/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/i386ex/wrapup/Makefile.in @@ -5,42 +5,44 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/i386ex/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/i386ex/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -BSP_PIECES=startup clock console timer $(NETWORK) -GENERIC_PIECES= +BSP_PIECES = startup clock console timer $(NETWORK) +GENERIC_PIECES = # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = network NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,14 +57,14 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/3c509/Makefile.in b/c/src/lib/libbsp/i386/pc386/3c509/Makefile.in index 6e926826dc..c9503553d0 100644 --- a/c/src/lib/libbsp/i386/pc386/3c509/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/3c509/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/3c509 +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/3c509 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/3c509.rel +PGM = ${ARCH}/3c509.rel # C source names, if any, go here -- minus the .c -C_PIECES=3c509 elink -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = 3c509 elink +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/Makefile.in b/c/src/lib/libbsp/i386/pc386/Makefile.in index 2827b729a4..52f7a70263 100644 --- a/c/src/lib/libbsp/i386/pc386/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/Makefile.in @@ -5,28 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386 +top_builddir = ../../.. +subdir = libbsp/i386/pc386 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = dec21140 ne2000 wd8003 3c509 NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include tools start startup clock console timer $(NETWORK) \ - wrapup +SUB_DIRS = include tools start startup clock console timer $(NETWORK) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/clock/Makefile.in b/c/src/lib/libbsp/i386/pc386/clock/Makefile.in index bde7f7cb16..69d49d46c1 100644 --- a/c/src/lib/libbsp/i386/pc386/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/clock/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/clock +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/clock.rel +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit rtc -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit rtc +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/console/Makefile.in b/c/src/lib/libbsp/i386/pc386/console/Makefile.in index 2b33bf896e..66f5ed13e7 100644 --- a/c/src/lib/libbsp/i386/pc386/console/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/console/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/console +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@:@srcdir@/../../shared/io -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel # C source names, if any, go here -- minus the .c -C_PIECES=console inch outch printk -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console inch outch printk +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=videoAsm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = videoAsm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in b/c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in index 6ebc4bb867..56e05143e9 100644 --- a/c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/dec21140/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/dec21140 +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/dec21140 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/dec21140.rel +PGM = ${ARCH}/dec21140.rel # C source names, if any, go here -- minus the .c -C_PIECES=dec21140 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = dec21140 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/include/Makefile.in b/c/src/lib/libbsp/i386/pc386/include/Makefile.in index ff1e6c964a..57585a0efe 100644 --- a/c/src/lib/libbsp/i386/pc386/include/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/include +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -20,8 +18,7 @@ VPATH = @srcdir@ WD80X3_yes_V = $(srcdir)/wd80x3.h WD80X3 = $(WD80X3_$(HAS_NETWORKING)_V) -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/crt.h \ - $(WD80X3) +H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/crt.h $(WD80X3) # # Equate files are for including from assembly preprocessed by @@ -33,18 +30,26 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(srcdir)/crt.h \ EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in b/c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in index d4ded9e8e3..8e5f7e4f45 100644 --- a/c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/ne2000/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/ne2000 +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/ne2000 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/ne2000.rel +PGM = ${ARCH}/ne2000.rel # C source names, if any, go here -- minus the .c -C_PIECES=ne2000 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ne2000 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/start/Makefile.in b/c/src/lib/libbsp/i386/pc386/start/Makefile.in index 1738dabe65..9d3388cdba 100644 --- a/c/src/lib/libbsp/i386/pc386/start/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/start/Makefile.in @@ -5,50 +5,46 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/start +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ - -PGMS=${ARCH}/start.o ${ARCH}/start16.bin +PGMS = ${ARCH}/start.o ${ARCH}/start16.bin # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start16 start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start16 start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -ifeq ($(RTEMS_GAS_CODE16),yes) -CPPFLAGS += -DNEW_GAS -endif -CFLAGS += +@RTEMS_GAS_CODE16_TRUE@CPPFLAGS += -DNEW_GAS +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,13 +56,13 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGMS) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGMS) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -LINKCMDS=$(srcdir)/../startup/linkcmds +LINKCMDS = $(srcdir)/../startup/linkcmds ${ARCH}/start16.o: start16.S ${COMPILE.S} -DHEADERADDR=$(HEADERADDR) -o $@ $< @@ -76,6 +72,6 @@ ${ARCH}/start16.bin: ${ARCH}/start16.o --oformat=elf32-i386 -o $(basename $@).obj $(basename $@).o $(OBJCOPY) -O binary $(basename $@).obj $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/startup/Makefile.in b/c/src/lib/libbsp/i386/pc386/startup/Makefile.in index d881224d85..2b898d4518 100644 --- a/c/src/lib/libbsp/i386/pc386/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/startup/Makefile.in @@ -5,49 +5,57 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/startup +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/irq:@srcdir@/../../shared/comm:@srcdir@/../../shared/pci +VPATH = \ + @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/irq:@srcdir@/../../shared/comm:@srcdir@/../../shared/pci -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bsplibc bsppost bspstart exit irq irq_init bootcard main sbrk i386-stub i386-stub-glue uart pcibios gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = bsplibc bsppost bspstart exit irq irq_init bootcard main sbrk \ + i386-stub i386-stub-glue uart pcibios gnatinstallhandler +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=ldsegs irq_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = ldsegs irq_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # # USE_INIT_FINI tells main.c what C++ help we need. -DEFINES += -DUSE_INIT_FINI +DEFINES += -DUSE_INIT_FINI CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,11 +69,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/timer/Makefile.in b/c/src/lib/libbsp/i386/pc386/timer/Makefile.in index f21c351dd8..f15980b605 100644 --- a/c/src/lib/libbsp/i386/pc386/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/timer +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/tools/Makefile.am b/c/src/lib/libbsp/i386/pc386/tools/Makefile.am index d428bd29e4..35c8285fc7 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/Makefile.am +++ b/c/src/lib/libbsp/i386/pc386/tools/Makefile.am @@ -2,8 +2,8 @@ # $Id$ # -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal EXTRA_DIST = Spec.doc @@ -18,8 +18,8 @@ binpatch_SOURCES = binpatch.c preinstall: install-exec-local install-exec-local: $(PROGRAMS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools - $(INSTALL_PROGRAM) bin2boot $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools - $(INSTALL_PROGRAM) binpatch $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools + $(mkinstalldirs) $(PROJECT_ROOT)/pc386/build-tools + $(INSTALL_PROGRAM) bin2boot $(PROJECT_ROOT)/pc386/build-tools + $(INSTALL_PROGRAM) binpatch $(PROJECT_ROOT)/pc386/build-tools include $(top_srcdir)/../../../../../../../automake/local.am diff --git a/c/src/lib/libbsp/i386/pc386/tools/Makefile.in b/c/src/lib/libbsp/i386/pc386/tools/Makefile.in index b878f28f71..a003c6fd50 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/tools/Makefile.in @@ -44,6 +44,8 @@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . + +ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ @@ -67,16 +69,25 @@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ CC = @CC@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ RTEMS_CPU = @RTEMS_CPU@ RTEMS_ROOT = @RTEMS_ROOT@ RTEMS_TOPdir = @RTEMS_TOPdir@ VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal EXTRA_DIST = Spec.doc @@ -121,19 +132,19 @@ OBJECTS = $(bin2boot_OBJECTS) $(binpatch_OBJECTS) all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .o .s -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) mostlyclean-noinstPROGRAMS: @@ -362,9 +373,9 @@ maintainer-clean preinstall: install-exec-local install-exec-local: $(PROGRAMS) - $(mkinstalldirs) $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools - $(INSTALL_PROGRAM) bin2boot $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools - $(INSTALL_PROGRAM) binpatch $(PROJECT_ROOT)/${RTEMS_BSP}/build-tools + $(mkinstalldirs) $(PROJECT_ROOT)/pc386/build-tools + $(INSTALL_PROGRAM) bin2boot $(PROJECT_ROOT)/pc386/build-tools + $(INSTALL_PROGRAM) binpatch $(PROJECT_ROOT)/pc386/build-tools debug-am: debug: debug-am diff --git a/c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 b/c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 index b7fa6c0106..7d2cb397fc 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 +++ b/c/src/lib/libbsp/i386/pc386/tools/aclocal.m4 @@ -27,10 +27,6 @@ TARGET_SUBDIR=".") RTEMS_TOPdir="$1"; AC_SUBST(RTEMS_TOPdir) -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." -AC_SUBST(PROJECT_ROOT) - dnl Determine RTEMS Version string from the VERSION file dnl Hopefully, Joel never changes its format ;- AC_MSG_CHECKING([for RTEMS Version]) @@ -46,9 +42,6 @@ if test -z "$RTEMS_VERSION"; then AC_MSG_ERROR(Unable to determine version) fi AC_MSG_RESULT($RTEMS_VERSION) - -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; -AC_SUBST(RTEMS_ROOT) ])dnl dnl @@ -184,3 +177,85 @@ else fi AC_SUBST($1)]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +dnl +dnl $Id$ +dnl + +AC_DEFUN(RTEMS_PROJECT_ROOT, +[dnl +AC_REQUIRE([RTEMS_TOP]) +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi +AC_SUBST(PROJECT_ROOT) + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP +AC_SUBST(RTEMS_ROOT) + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" +AC_SUBST(INSTALL_CHANGE) + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" +AC_SUBST(PACKHEX) +]) + + +AC_DEFUN(RTEMS_TOOLPATHS, +[ +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported +AC_REQUIRE([RTEMS_PROJECT_ROOT]) + +tooldir='$(PROJECT_ROOT)' +AC_SUBST(tooldir) + +project_includedir='$(tooldir)'/include +AC_SUBST(project_includedir) + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' +AC_SUBST(project_libdir) + +project_bindir='$(tooldir)/bin' +AC_SUBST(project_bindir) + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' +AC_SUBST(rtems_bspdir) +rtems_makedir='$(prefix)/make' +AC_SUBST(rtems_makedir) +]) + diff --git a/c/src/lib/libbsp/i386/pc386/tools/configure b/c/src/lib/libbsp/i386/pc386/tools/configure index d7280f490e..c3c9011f64 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/configure +++ b/c/src/lib/libbsp/i386/pc386/tools/configure @@ -13,6 +13,9 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-target-subdir=DIR" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -555,12 +558,8 @@ fi RTEMS_TOPdir="../../../../../../.."; -PROJECT_ROOT=`pwd`/$RTEMS_TOPdir; -test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.." - - echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6 -echo "configure:564: checking for RTEMS Version" >&5 +echo "configure:563: checking for RTEMS Version" >&5 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \ sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` @@ -572,9 +571,6 @@ if test -z "$RTEMS_VERSION"; then fi echo "$ac_t""$RTEMS_VERSION" 1>&6 -RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir; - - # Do some error checking and defaulting for the host and target type. @@ -604,7 +600,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:608: checking host system type" >&5 +echo "configure:604: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -625,7 +621,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:629: checking target system type" >&5 +echo "configure:625: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -643,7 +639,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:647: checking build system type" >&5 +echo "configure:643: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,7 +662,7 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6 -echo "configure:670: checking rtems target cpu" >&5 +echo "configure:666: checking rtems target cpu" >&5 case "${target}" in # hpux unix port should go here i[3456]86-go32-rtems*) @@ -704,7 +700,7 @@ echo "$ac_t""$RTEMS_CPU" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:708: checking for a BSD compatible install" >&5 +echo "configure:704: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +753,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:761: checking whether build environment is sane" >&5 +echo "configure:757: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -814,7 +810,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:818: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -853,7 +849,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:857: checking for working aclocal" >&5 +echo "configure:853: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -866,7 +862,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:870: checking for working autoconf" >&5 +echo "configure:866: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -879,7 +875,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:883: checking for working automake" >&5 +echo "configure:879: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -892,7 +888,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:896: checking for working autoheader" >&5 +echo "configure:892: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -905,7 +901,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:909: checking for working makeinfo" >&5 +echo "configure:905: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -918,11 +914,34 @@ else fi +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:926: checking for $ac_word" >&5 +echo "configure:945: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -952,7 +971,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:956: checking for $ac_word" >&5 +echo "configure:975: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1003,7 +1022,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1007: checking for $ac_word" >&5 +echo "configure:1026: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1035,7 +1054,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1039: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1058: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1046,12 +1065,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1050 "configure" +#line 1069 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1077,12 +1096,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1081: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1100: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1086: checking whether we are using GNU C" >&5 +echo "configure:1105: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1091,7 +1110,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1110,7 +1129,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1114: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1133: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1145,12 +1164,12 @@ fi for ac_func in strtol strtoul do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1149: checking for $ac_func" >&5 +echo "configure:1168: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1198,6 +1217,46 @@ fi done + +if test "$TARGET_SUBDIR" = "." ; then +PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)'; +else +PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)' +fi + + +RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP + + +INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change" + + +PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex" + + + +# tooldir='$(exec_prefix)/'$target_alias +# Temporary work-around until building in source tree is supported + + +tooldir='$(PROJECT_ROOT)' + + +project_includedir='$(tooldir)'/include + + +project_libdir='$(tooldir)/lib$(MULTISUBDIR)' + + +project_bindir='$(tooldir)/bin' + + +rtems_bspdir='$(prefix)/${RTEMS_BSP}' + +rtems_makedir='$(prefix)/make' + + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -1344,8 +1403,6 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g -s%@PROJECT_ROOT@%$PROJECT_ROOT%g -s%@RTEMS_ROOT@%$RTEMS_ROOT%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1373,7 +1430,20 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g s%@CC@%$CC%g +s%@PROJECT_ROOT@%$PROJECT_ROOT%g +s%@RTEMS_ROOT@%$RTEMS_ROOT%g +s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g +s%@PACKHEX@%$PACKHEX%g +s%@tooldir@%$tooldir%g +s%@project_includedir@%$project_includedir%g +s%@project_libdir@%$project_libdir%g +s%@project_bindir@%$project_bindir%g +s%@rtems_bspdir@%$rtems_bspdir%g +s%@rtems_makedir@%$rtems_makedir%g CEOF EOF diff --git a/c/src/lib/libbsp/i386/pc386/tools/configure.in b/c/src/lib/libbsp/i386/pc386/tools/configure.in index accb5d2bfb..4ac349b8d2 100644 --- a/c/src/lib/libbsp/i386/pc386/tools/configure.in +++ b/c/src/lib/libbsp/i386/pc386/tools/configure.in @@ -9,10 +9,14 @@ RTEMS_TOP(../../../../../../..) RTEMS_CANONICAL_TARGET_CPU AM_INIT_AUTOMAKE(rtems-lib-libbsp-i386-pc386-tools,$RTEMS_VERSION,no) +AM_MAINTAINER_MODE AC_PROG_CC AC_CHECK_FUNCS(strtol strtoul) +RTEMS_PROJECT_ROOT +RTEMS_TOOLPATHS + AC_OUTPUT( Makefile) diff --git a/c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in b/c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in index 7f7aa53fbb..c0c87c5e92 100644 --- a/c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/wd8003/Makefile.in @@ -5,42 +5,42 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/wd8003 +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/wd8003 -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/wd8003.rel +PGM = ${ARCH}/wd8003.rel # C source names, if any, go here -- minus the .c -C_PIECES=wd8003 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = wd8003 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ +DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__ CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,11 +55,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in b/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in index 0cc04742ad..85acc759f0 100644 --- a/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/pc386/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/pc386/wrapup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -19,28 +17,38 @@ VPATH = @srcdir@ NETWORK_yes_V = dec21140 ne2000 wd8003 3c509 NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) -BSP_PIECES=startup clock console timer $(NETWORK) -GENERIC_PIECES= +BSP_PIECES = startup clock console timer $(NETWORK) +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_RELEASE)/BootImgs + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,15 +63,18 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: preinstall ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib + +# HACK: # we create here a directory specific to the PC386 BSP to store the BootImage # files so they can be easily found - mkdir -p ${PROJECT_RELEASE}/BootImgs +preinstall: $(INSTALLDIRS) + $(mkinstalldirs) $(INSTALLDIRS) -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/Makefile.in b/c/src/lib/libbsp/i386/shared/Makefile.in index e8d8e88cbe..d07487113e 100644 --- a/c/src/lib/libbsp/i386/shared/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/Makefile.in @@ -5,22 +5,22 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/shared +top_builddir = ../../.. +subdir = libbsp/i386/shared -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # Descend into the $(RTEMS_BSP_FAMILY) directory -SUB_DIRS=irq io comm pci +SUB_DIRS = irq io comm pci -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/comm/Makefile.in b/c/src/lib/libbsp/i386/shared/comm/Makefile.in index e508f4e133..bf1a31e891 100644 --- a/c/src/lib/libbsp/i386/shared/comm/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/comm/Makefile.in @@ -5,17 +5,15 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/shared/comm +top_builddir = ../../../.. +subdir = libbsp/i386/shared/comm -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/uart.h +H_FILES = $(srcdir)/uart.h # # Equate files are for including from assembly preprocessed by @@ -27,17 +25,25 @@ H_FILES = $(srcdir)/uart.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += preinstall all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(SRCS) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(SRCS) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/io/Makefile.in b/c/src/lib/libbsp/i386/shared/io/Makefile.in index a2af100567..87a30d4613 100644 --- a/c/src/lib/libbsp/i386/shared/io/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/io/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/shared/io +top_builddir = ../../../.. +subdir = libbsp/i386/shared/io -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/bspIo.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += preinstall all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/irq/Makefile.in b/c/src/lib/libbsp/i386/shared/irq/Makefile.in index 86614e5ea2..b59a09c995 100644 --- a/c/src/lib/libbsp/i386/shared/irq/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/irq/Makefile.in @@ -5,17 +5,15 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/shared/irq +top_builddir = ../../../.. +subdir = libbsp/i386/shared/irq -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/irq.h $(srcdir)/irq_asm.h +H_FILES = $(srcdir)/irq.h $(srcdir)/irq_asm.h # # Equate files are for including from assembly preprocessed by @@ -27,18 +25,26 @@ H_FILES = $(srcdir)/irq.h $(srcdir)/irq_asm.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += preinstall all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/shared/pci/Makefile.in b/c/src/lib/libbsp/i386/shared/pci/Makefile.in index 5b5077cda5..c673cfcca7 100644 --- a/c/src/lib/libbsp/i386/shared/pci/Makefile.in +++ b/c/src/lib/libbsp/i386/shared/pci/Makefile.in @@ -5,17 +5,15 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/shared/pci +top_builddir = ../../../.. +subdir = libbsp/i386/shared/pci -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -H_FILES = $(srcdir)/pcibios.h +H_FILES = $(srcdir)/pcibios.h # # Equate files are for including from assembly preprocessed by @@ -27,17 +25,25 @@ H_FILES = $(srcdir)/pcibios.h EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/${RTEMS_BSP}.cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += preinstall all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(SRCS) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(SRCS) $(PROJECT_INCLUDE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/Makefile.in index 29cc2940c6..29150201c2 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/Makefile.in @@ -5,27 +5,27 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex +top_builddir = ../../.. +subdir = libbsp/i386/ts_386ex -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/directory.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = network NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) # wrapup is the one that actually builds and installs the library # from the individual .rel files built in other directories -SUB_DIRS=include start startup clock console timer $(NETWORK) wrapup +SUB_DIRS = include tools start startup clock console timer $(NETWORK) wrapup -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in index ae44755dc5..5a01e3e231 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/clock/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/clock +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/clock -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ - -PGM=${ARCH}/clock.rel + +PGM = ${ARCH}/clock.rel # C source names, if any, go here -- minus the .c -C_PIECES=ckinit rtc -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ckinit rtc +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in index 872b966f52..f6c08a069e 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/console/Makefile.in @@ -5,48 +5,48 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/console +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/console -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/console.rel +PGM = ${ARCH}/console.rel -IMPORT_SRC=$(srcdir)/../../shared/io/printk.c +IMPORT_SRC = $(srcdir)/../../shared/io/printk.c # C source names, if any, go here -- minus the .c -C_PIECES=console printk -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = console printk +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -CFLAGS += +DEFINES += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -58,17 +58,17 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: +preinstall: ${CP} ${IMPORT_SRC} . ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} preinstall $(SRCS) $(PGM) +all: ${ARCH} preinstall $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in index 49be342e7a..de0a2b14b1 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/include/Makefile.in @@ -5,12 +5,10 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/include +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/include -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ @@ -31,20 +29,28 @@ H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h $(NE2000) EQ_FILES = -SRCS=$(H_FILES) $(EQ_FILES) +SRCS = $(H_FILES) $(EQ_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = $(PROJECT_INCLUDE) + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: $(SRCS) - $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE) - $(INSTALL_CHANGE) -m 444 $(EQ_FILES) $(PROJECT_INCLUDE) +all: $(SRCS) + @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) + @$(INSTALL_CHANGE) -m 644 $(EQ_FILES) $(PROJECT_INCLUDE) -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in index 62b211072f..49dc01d9a3 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/network/Makefile.in @@ -5,43 +5,43 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/network +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/network -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/network.rel +PGM = ${ARCH}/network.rel # C source names, if any, go here -- minus the .c -C_PIECES=ne2000 -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = ne2000 +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = -SRCS=$(C_FILES) $(H_FILES) -OBJS=$(C_O_FILES) +SRCS = $(C_FILES) $(H_FILES) +OBJS = $(C_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += -D_COMPILING_BSD_KERNEL_ -DKERNEL -DINET -DNFS \ - -DDIAGNOSTIC -DBOOTP_COMPAT +DEFINES += -D_COMPILING_BSD_KERNEL_ -DKERNEL -DINET -DNFS -DDIAGNOSTIC \ + -DBOOTP_COMPAT CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -56,11 +56,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in index 313955a579..5d9e857775 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/start/Makefile.in @@ -5,51 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/start +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/start -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -RTEMS_GAS_CODE16 = @RTEMS_GAS_CODE16@ - -PGMS=${ARCH}/start.o +PGMS = ${ARCH}/start.o # C source names, if any, go here -- minus the .c -C_PIECES= -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=start -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = start +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -ifeq ($(RTEMS_GAS_CODE16),yes) -CPPFLAGS += -DNEW_GAS -endif +@RTEMS_GAS_CODE16_TRUE@CPPFLAGS += -DNEW_GAS -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,12 +57,12 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 555 ${PGMS} ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(OBJS) $(PGM) + $(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib # Install the program(s), appending _g or _p as appropriate. # for include files, just use $(INSTALL_CHANGE) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in index be92c0cdeb..8dc381b58f 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/startup/Makefile.in @@ -5,51 +5,59 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/startup +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/startup -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/comm:@srcdir@/../../shared/irq:@srcdir@/../../shared/io +VPATH = \ + @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/comm:@srcdir@/../../shared/irq:@srcdir@/../../shared/io -PGM=${ARCH}/startup.rel +PGM = ${ARCH}/startup.rel # C source names, if any, go here -- minus the .c -C_PIECES=bspclean bsplibc bsppost bspstart bootcard main sbrk irq irq_init i386-stub-glue uart i386-stub gnatinstallhandler +C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk irq irq_init \ + i386-stub-glue uart i386-stub gnatinstallhandler -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S # removed initcsu piece, ldsegs piece and flush -S_PIECES=irq_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = irq_asm +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(srcdir)/linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ +mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs + +INSTALLDIRS = . $(PROJECT_RELEASE)/lib + +$(INSTALLDIRS): + @$(mkinstalldirs) $(INSTALLDIRS) + # # (OPTIONAL) Add local stuff here using += # #DEFINES += -DPRINTON -DEFINES += -I$(srcdir) +DEFINES += -I$(srcdir) CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -61,19 +69,19 @@ LDFLAGS += CLEAN_ADDITIONS += CLOBBER_ADDITIONS += -preinstall: +preinstall: $(INSTALL_CHANGE) ${IMPORT_SRC} . # ${CP} ${IMPORT_SRC} . ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} preinstall $(SRCS) $(PGM) - $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib +all: ${ARCH} preinstall $(SRCS) $(PGM) + $(INSTALL_CHANGE) $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in index 729885a081..42651f536d 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/timer/Makefile.in @@ -5,47 +5,47 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/timer +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/timer -INSTALL = @INSTALL@ - -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +RTEMS_ROOT = @RTEMS_ROOT@ PROJECT_ROOT = @PROJECT_ROOT@ VPATH = @srcdir@ -PGM=${ARCH}/timer.rel +PGM = ${ARCH}/timer.rel # C source names, if any, go here -- minus the .c -C_PIECES=timer -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) +C_PIECES = timer +C_FILES = $(C_PIECES:%=%.c) +C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) -H_FILES= +H_FILES = # Assembly source names, if any, go here -- minus the .S -S_PIECES=timerisr -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) +S_PIECES = timerisr +S_FILES = $(S_PIECES:%=%.S) +S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) +SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) +OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/leaf.cfg +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -60,11 +60,11 @@ CLOBBER_ADDITIONS += ${PGM}: ${SRCS} ${OBJS} $(make-rel) -all: ${ARCH} $(SRCS) $(PGM) +all: ${ARCH} $(SRCS) $(PGM) # the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all +install: all -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in index a3963fc909..cc4e21ddc6 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.in @@ -1,26 +1,429 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + # -# $Id$ +# $Id$ # -@SET_MAKE@ + + + +SHELL = @SHELL@ + srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/timer +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +INSTALL_CHANGE = @INSTALL_CHANGE@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +PACKAGE = @PACKAGE@ +PACKHEX = @PACKHEX@ PROJECT_ROOT = @PROJECT_ROOT@ +RTEMS_CPU = @RTEMS_CPU@ +RTEMS_ROOT = @RTEMS_ROOT@ +RTEMS_TOPdir = @RTEMS_TOPdir@ +VERSION = @VERSION@ +project_bindir = @project_bindir@ +project_includedir = @project_includedir@ +project_libdir = @project_libdir@ +rtems_bspdir = @rtems_bspdir@ +rtems_makedir = @rtems_makedir@ +tooldir = @tooldir@ -VPATH = @srcdir@ +AUTOMAKE_OPTIONS = foreign 1.4 +ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal + +noinst_SCRIPTS = coff2bin + + +SUBDIRS = ts_1325_ada dos_sup -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += +EXTRA_DIST = $(noinst_SCRIPTS) -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../../mkinstalldirs +CONFIG_CLEAN_FILES = +SCRIPTS = $(noinst_SCRIPTS) + +DIST_COMMON = README Makefile.am Makefile.in aclocal.m4 configure \ +configure.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/subdirs.am $(top_srcdir)/../../../../../../../automake/local.am + cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" = "." && dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ + done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile $(SCRIPTS) +all-redirect: all-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-tags distclean-generic clean-am + +distclean: distclean-recursive + -rm -f config.status + +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + -rm -f config.status + +.PHONY: install-data-recursive uninstall-data-recursive \ +install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +uninstalldirs-recursive all-recursive check-recursive \ +installcheck-recursive info-recursive dvi-recursive \ +mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +depend-recursive \ +clobber-recursive \ +preinstall-recursive \ +debug-recursive \ +debug_install-recursive \ +profile-recursive \ +profile_install-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +debug: debug-recursive +.PHONY: debug-recursive + +debug_install: debug_install-recursive +.PHONY: debug_install-recursive + +profile: profile-recursive +.PHONY: profile-recursive + +profile_install: profile_install-recursive +.PHONY: profile-recursive + +preinstall: preinstall-recursive +.PHONY: preinstall-recursive + +clobber: clobber-recursive +.PHONY: clobber-recursive + +depend: depend-recursive +.PHONY: depend-recursive + +debug-am: +debug: debug-am +.PHONY: debug debug-am + +debug_install-am: +debug_install: debug_install-am +.PHONY: debug_install debug_install-am + +profile-am: +profile: profile-am +.PHONY: profile profile-am + +profile_install-am: +profile_install: profile_install-am +.PHONY: profile_install profile_install-am + +preinstall-am: +preinstall: preinstall-am +.PHONY: preinstall preinstall-am + +clobber-am: +clobber: clobber-am +.PHONY: clobber clobber-am + +depend-am: +depend: depend-am +.PHONY: depend depend-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile deleted file mode 100644 index 1ce881e04e..0000000000 --- a/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile +++ /dev/null @@ -1,41 +0,0 @@ -# -# Makefile for TS-1325 Utilities example -# - -MAIN=ts1325_test - -# Tool paths -tooldir=/usr/local/rtems -rtemsdir=${tooldir}/rtems/ts_386ex - -# Tool names -GCC=${tooldir}/bin/i386-rtems-gcc -GNATMAKE=${tooldir}/bin/i386-rtems-gnatmake -SIZE=${tooldir}/bin/i386-rtems-size -SIS=${tooldir}/bin/sis -GDB=${tooldir}/bin/sis-gdb - -CARGS=-B${rtemsdir}/lib/ -specs bsp_specs -qrtems \ --msoft-float -mno-fp-ret-in-387 -#CARGS=-B/usr/local/rtems/tools/build-i386-rtems/ts_386ex/lib/ -specs bsp_specs -qrtems - -all: init.o - $(GNATMAKE) -O -gnata -gnatE -gnato $(MAIN) -g \ - -bargs -r \ - -cargs $(CARGS) \ - -largs $(CARGS) init.o - $(SIZE) $(MAIN) - - - -init.o: init.c - $(GCC) -O4 -g -Wall -ansi -fasm $(CARGS) -c init.c - -run: - $(SIS) $(MAIN) - -gdb: - $(GDB) $(MAIN) - -clean: - rm -f b_$(MAIN).c b_$(MAIN).o *.o *.ali $(MAIN) diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/README b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/README new file mode 100644 index 0000000000..0e85bba7d0 --- /dev/null +++ b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/README @@ -0,0 +1,10 @@ +# +# $Id$ +# + +This is a test which can be built and run after the tools and BSP are +installed. It's placement in the BSP tree is questionable since this +is the only target program like this in the RTEMS tree. We need to +work out some kind of proper placement for it. + +It is written in Ada. diff --git a/c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in index 2c886e504e..a22567a632 100644 --- a/c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in +++ b/c/src/lib/libbsp/i386/ts_386ex/wrapup/Makefile.in @@ -5,42 +5,44 @@ @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ -top_builddir = ../../../../../../.. -subdir = c/src/lib/libbsp/i386/ts_386ex/wrapup +top_builddir = ../../../.. +subdir = libbsp/i386/ts_386ex/wrapup -INSTALL = @INSTALL@ +RTEMS_ROOT = @RTEMS_ROOT@ +PROJECT_ROOT = @PROJECT_ROOT@ # We only build the Network library if HAS_NETWORKING was defined NETWORK_yes_V = network NETWORK = $(NETWORK_$(HAS_NETWORKING)_V) -RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - VPATH = @srcdir@ -BSP_PIECES=startup clock console timer $(NETWORK) -GENERIC_PIECES= +BSP_PIECES = startup clock console timer $(NETWORK) +GENERIC_PIECES = # bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS=$(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel) -LIB=$(ARCH)/libbsp.a +OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \ + $(foreach piece, $(GENERIC_PIECES), \ + ../../../$(piece)/$(ARCH)/$(piece).rel) +LIB = $(ARCH)/libbsp.a -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg +include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg include $(RTEMS_ROOT)/make/lib.cfg +INSTALL = @INSTALL@ +INSTALL_CHANGE = @INSTALL_CHANGE@ + # # (OPTIONAL) Add local stuff here using += # -DEFINES += +DEFINES += CPPFLAGS += -CFLAGS += +CFLAGS += -LD_PATHS += -LD_LIBS += -LDFLAGS += +LD_PATHS += +LD_LIBS += +LDFLAGS += # # Add your list of files to delete here. The config files @@ -55,16 +57,16 @@ CLOBBER_ADDITIONS += $(LIB): ${OBJS} $(make-library) -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) ${PROJECT_RELEASE}/lib +all: ${ARCH} $(SRCS) $(LIB) + $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib -install: all +install: all -$(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs: ../bsp_specs +$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs $(INSTALL_DATA) $< $@ -preinstall: $(PROJECT_ROOT)/${RTEMS_BSP}/lib/bsp_specs +preinstall: $(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -- cgit v1.2.3