From 6128a4aa5e791ed4e0a655bfd346a52d92da7883 Mon Sep 17 00:00:00 2001 From: Ralf Corsepius Date: Wed, 21 Apr 2004 10:43:04 +0000 Subject: Remove stray white spaces. --- c/src/lib/libbsp/i386/shared/irq/irq.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'c/src/lib/libbsp/i386/shared/irq/irq.h') diff --git a/c/src/lib/libbsp/i386/shared/irq/irq.h b/c/src/lib/libbsp/i386/shared/irq/irq.h index fa82c0233d..3a1add8355 100644 --- a/c/src/lib/libbsp/i386/shared/irq/irq.h +++ b/c/src/lib/libbsp/i386/shared/irq/irq.h @@ -28,7 +28,7 @@ extern "C" { /* * Include some preprocessor value also used by assember code */ - + #include #include /*-------------------------------------------------------------------------+ @@ -37,7 +37,7 @@ extern "C" { typedef enum { /* Base vector for our IRQ handlers. */ - BSP_IRQ_VECTOR_BASE = BSP_ASM_IRQ_VECTOR_BASE, + BSP_IRQ_VECTOR_BASE = BSP_ASM_IRQ_VECTOR_BASE, BSP_IRQ_LINES_NUMBER = 16, BSP_LOWEST_OFFSET = 0, BSP_MAX_OFFSET = BSP_IRQ_LINES_NUMBER - 1, @@ -46,7 +46,7 @@ typedef enum { * NB : 1) Interrupt vector number in IDT = offset + BSP_ASM_IRQ_VECTOR_BASE * 2) The same name should be defined on all architecture * so that handler connexion can be unchanged. - */ + */ BSP_PERIODIC_TIMER = 0, BSP_KEYBOARD = 1, @@ -56,11 +56,11 @@ typedef enum { BSP_UART_COM1_IRQ = 4, BSP_RT_TIMER1 = 8, - + BSP_RT_TIMER3 = 10 } rtems_irq_symbolic_name; - + /* @@ -94,9 +94,9 @@ typedef struct __rtems_irq_connect_data__ { * It is usually called immediately AFTER connecting the interrupt handler. * RTEMS may well need such a function when restoring normal interrupt * processing after a debug session. - * + * */ - rtems_irq_enable on; + rtems_irq_enable on; /* * function for disabling interrupts at device level (ONLY!). * The code will disable it at i8259s level. RATIONALE : anyway @@ -132,7 +132,7 @@ typedef struct { rtems_irq_symbolic_name irqBase; /* * software priorities associated with interrupts. - * if irqPrio [i] > intrPrio [j] it means that + * if irqPrio [i] > intrPrio [j] it means that * interrupt handler hdl connected for interrupt name i * will not be interrupted by the handler connected for interrupt j * The interrupt source will be physically masked at i8259 level. @@ -209,7 +209,7 @@ int BSP_irq_enabled_at_i8259s (const rtems_irq_symbolic_name irqLine); * 4) perform rescheduling when necessary, * 5) restore the C scratch registers... * 6) restore initial execution flow - * + * */ int BSP_install_rtems_irq_handler (const rtems_irq_connect_data*); /* @@ -252,7 +252,7 @@ int BSP_rtems_irq_mngt_set(rtems_irq_global_settings* config); * (Re) get info on current RTEMS interrupt management. */ int BSP_rtems_irq_mngt_get(rtems_irq_global_settings**); - + #ifdef __cplusplus } #endif -- cgit v1.2.3