From dbaf51a44b8c465ac2f546d21719c66cd889c91f Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Thu, 23 Jul 1998 22:13:10 +0000 Subject: Patch from Emmanuel Raguet : Here is a patch for KA9Q stack. This patch contains an Ethernet Driver for Western Digital, some fixes for the UDP and TCP protocols (for endian conversion) and some little programs which allow the test of UDP and TCP sockets via Ethernet. I have tested that on an Intel machine. If someone can test it on a big-endian machine, ... --- c/src/lib/libbsp/i386/pc386/network/network.c | 554 ++++++++++++++++++++++++++ 1 file changed, 554 insertions(+) create mode 100644 c/src/lib/libbsp/i386/pc386/network/network.c (limited to 'c/src/lib/libbsp/i386/pc386/network/network.c') diff --git a/c/src/lib/libbsp/i386/pc386/network/network.c b/c/src/lib/libbsp/i386/pc386/network/network.c new file mode 100644 index 0000000000..a37b9cf88c --- /dev/null +++ b/c/src/lib/libbsp/i386/pc386/network/network.c @@ -0,0 +1,554 @@ +/* + * RTEMS/KA9Q driver for WD8003 Ethernet Controller + * + * + * $Id$ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "irq.h" + +#define ET_MINLEN 60 /* minimum message length */ + +/* + * Number of SCCs supported by this driver + */ +#define NSCCDRIVER 1 + +/* + * Default number of buffer descriptors set aside for this driver. + * The number of transmit buffer descriptors has to be quite large + * since a single frame often uses four or more buffer descriptors. + */ + +#define RX_BUF_COUNT 15 +#define TX_BUF_COUNT 4 +#define TX_BD_PER_BUF 4 + +/* + * RTEMS event used by interrupt handler to signal daemons. + * This must *not* be the same event used by the KA9Q task synchronization. + */ +#define INTERRUPT_EVENT RTEMS_EVENT_1 + +/* + * Receive buffer size -- Allow for a full ethernet packet plus a pointer + */ +#define RBUF_SIZE (1520 + sizeof (struct iface *)) + +/* + * Hardware-specific storage + */ +typedef struct { + struct mbuf **rxMbuf; + struct mbuf **txMbuf; + unsigned int port; + char *base; + unsigned long bpar; + unsigned int irno; + int rxBdCount; + int txBdCount; + int txBdHead; + int txBdTail; + int txBdActiveCount; + struct iface *iface; + rtems_id txWaitTid; + + /* + * Statistics + */ + unsigned long rxInterrupts; + unsigned long rxNotFirst; + unsigned long rxNotLast; + unsigned long rxGiant; + unsigned long rxNonOctet; + unsigned long rxRunt; + unsigned long rxBadCRC; + unsigned long rxOverrun; + unsigned long rxCollision; + + unsigned long txInterrupts; + unsigned long txDeferred; + unsigned long txHeartbeat; + unsigned long txLateCollision; + unsigned long txRetryLimit; + unsigned long txUnderrun; + unsigned long txLostCarrier; + unsigned long txRawWait; +}wd80x3EnetDriver; + +#define RO 0x10 + +#define SHATOT (8*1024) /* size of shared memory */ +#define SHAPAGE 256 /* shared memory information */ +#define MAXSIZ 1536 /*(MAXBUF - MESSH_SZ)*/ +#define OUTPAGE ((SHATOT-(MAXSIZ+SHAPAGE-1))/SHAPAGE) + +static unsigned long loopc; + +static wd80x3EnetDriver wd8003EnetDriver[NSCCDRIVER]; + +/* + * WD8003 interrupt handler + */ +static rtems_isr +wd8003Enet_interrupt_handler (rtems_vector_number v) +{ + unsigned int tport, nowTicks, bootTicks; + unsigned char status, status2; + + struct iface *iface = (struct iface *)(wd8003EnetDriver[0].iface); + wd80x3EnetDriver *dp = (wd80x3EnetDriver *)&wd8003EnetDriver[0]; + struct mbuf *bp; + unsigned int i2; + unsigned int len; + unsigned char start, next, current; + char *shp, *temp; + + tport = wd8003EnetDriver[0].port ; + + PC386_disableIrq(wd8003EnetDriver[0].irno); + PC386_ackIrq(wd8003EnetDriver[0].irno); + asm volatile("sti"); + + /* + * Drop chips interrupt + */ + outport_byte(tport+IMR, 0x00); + + /* + * Read status + */ + inport_byte(tport+ISR, status); + + /* + * Ring overwrite + */ + + if (status & MSK_OVW){ + outport_byte(tport+CMDR, MSK_STP + MSK_RD2); /* stop 8390 */ + rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &bootTicks ); + while(nowTicks < bootTicks+loopc) /* 2ms delay */ + rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &nowTicks ); + outport_byte(tport+RBCR0, 0); /* clear byte count */ + outport_byte(tport+RBCR1, 0); + inport_byte(tport+ISR, status2); + status |= (status2 & (MSK_PTX+MSK_TXE)) ; /* TX status */ + outport_byte(tport+TCR, MSK_LOOP); /* loopback mode */ + outport_byte(tport+CMDR, MSK_STA + MSK_RD2); /* start */ + } + + /* + * Frame received? + */ + while (status & (MSK_PRX+MSK_RXE)) { + outport_byte(tport+ISR, status & (MSK_PRX+MSK_RXE)); + inport_byte(tport+BNRY, start); + start += 1; + shp = dp->base + 1 + (SHAPAGE * start); + next = *shp++; + len = *((short *)shp)++ - 4; + if (start >= OUTPAGE || next >= OUTPAGE) + break; + bp = ambufw (RBUF_SIZE); + bp->data += sizeof (struct iface *); + temp = bp->data; + bp->cnt = len; + + if ((i2 = (OUTPAGE - start) * SHAPAGE - 4) < len){ + memcpy(temp, shp, i2); + len -= i2; + temp += i2; + shp = dp->base; + } + memcpy(temp, shp, len); + + net_route (iface, &bp); + outport_byte(tport+BNRY, next-1); + outport_byte(tport+CMDR, MSK_PG1 + MSK_RD2); + inport_byte(tport+CURR, current); + outport_byte(tport+CMDR, MSK_PG0 + MSK_RD2); + if (current == next) + break; + } + + /* + * Ring overwrite + */ + if (status & MSK_OVW) { + outport_byte(tport+ISR, MSK_OVW); /* reset IR */ + outport_byte(tport+TCR, 0); /* out of loopback */ + if ((status & (MSK_PTX+MSK_TXE)) == 0) + outport_byte(tport+CMDR, MSK_TXP + MSK_RD2); /* resend */ + } + + /* + * Enable chip interrupts + */ + outport_byte(tport+IMR, 0x15); + asm volatile("cli"); + PC386_enableIrq(wd8003EnetDriver[0].irno); + +} + +/* + * Initialize the ethernet hardware + */ +static void +wd8003Enet_initialize_hardware (wd80x3EnetDriver *dp, int broadcastFlag) +{ + int i1, ultra; + char cc1, cc2; + unsigned char temp; + rtems_status_code sc; + unsigned int tport; + + tport = dp->port; + + /* address from board ROM */ + inport_byte(tport+0x04, temp); + outport_byte(tport+0x04, temp & 0x7f); + + for (i1=cc2=0; i1<8; i1++) { + inport_byte(tport + ADDROM + i1, cc1); + cc2 += cc1; + if (i1 < 6) + dp->iface->hwaddr[i1] = cc1; + } + + inport_byte(tport+0x04, temp); + outport_byte(tport+0x04, temp | 0x80); /* alternate registers */ + outport_byte(tport+W83CREG, MSK_RESET); /* reset board, set buffer */ + outport_byte(tport+W83CREG, 0); + outport_byte(tport+W83CREG, MSK_ENASH + (int)((dp->bpar>>13)&0x3f)); + + outport_byte(tport+CMDR, MSK_PG0 + MSK_RD2); + cc1 = MSK_BMS + MSK_FT10; /* configure 8 or 16 bits */ + + inport_byte(tport+0x07, temp) ; + + ultra = ((temp & 0xf0) == 0x20 || (temp & 0xf0) == 0x40); + if (ultra) + cc1 = MSK_WTS + MSK_BMS + MSK_FT10; + outport_byte(tport+DCR, cc1); + outport_byte(tport+RBCR0, 0); + outport_byte(tport+RBCR1, 0); + outport_byte(tport+RCR, MSK_MON); /* disable the rxer */ + outport_byte(tport+TCR, 0); /* normal operation */ + outport_byte(tport+PSTOP, OUTPAGE); /* init PSTOP */ + outport_byte(tport+PSTART, 0); /* init PSTART */ + outport_byte(tport+BNRY, -1); /* init BNRY */ + outport_byte(tport+ISR, -1); /* clear IR's */ + outport_byte(tport+IMR, 0x15); /* 0x17 enable interrupt */ + + outport_byte(tport+CMDR, MSK_PG1 + MSK_RD2); + + for (i1=0; i1<6; i1++) /* initial physical addr */ + outport_byte(tport+PAR+i1, dp->iface->hwaddr[i1]); + + for (i1=0; i1irno, wd8003Enet_interrupt_handler); + if (sc != RTEMS_SUCCESSFUL) + rtems_panic ("Can't attach interrupt handler: %s\n", + rtems_status_text (sc)); +} + + +/* + * Send raw packet (caller provides header). + * This code runs in the context of the interface transmit + * task or in the context of the network task. + */ +static int +wd8003Enet_raw (struct iface *iface, struct mbuf **bpp) +{ + wd80x3EnetDriver *dp = &wd8003EnetDriver[iface->dev]; + struct mbuf *bp; + unsigned int len, tport; + char *shp; + + tport = dp->port; + + /* + * Fill in some logging data + */ + iface->rawsndcnt++; + iface->lastsent = secclock (); + dump (iface, IF_TRACE_OUT, *bpp); + + /* + * It would not do to have two tasks active in the transmit + * loop at the same time. + * The blocking is simple-minded since the odds of two tasks + * simultaneously attempting to use this code are low. The only + * way that two tasks can try to run here is: + * 1) Task A enters this code and ends up having to + * wait for a transmit buffer descriptor. + * 2) Task B gains control and tries to transmit a packet. + * The RTEMS/KA9Q scheduling semaphore ensures that there + * are no race conditions associated with manipulating the + * txWaitTid variable. + */ + + if (dp->txWaitTid) { + dp->txRawWait++; + while (dp->txWaitTid) + rtems_ka9q_ppause (10); + } + + if (dp->txWaitTid == 0) + rtems_task_ident (0, 0, &dp->txWaitTid); + + bp = *bpp; + len = 0; + shp = dp->base + (SHAPAGE * OUTPAGE); + + /*rtems_interrupt_disable(level);*/ + + for (;;){ + len += bp->cnt; + memcpy(shp, (char *)bp->data, bp->cnt); + shp += bp->cnt ; + if ((bp = bp->next) == NULL) + break; + } + + free_p(bpp); + + if (len < ET_MINLEN) len = ET_MINLEN; + outport_byte(tport+TBCR0, len); + outport_byte(tport+TBCR1, (len >> 8) ); + outport_byte(tport+TPSR, OUTPAGE); + outport_byte(tport+CMDR, MSK_TXP + MSK_RD2); + + /* + * Show that we've finished with the packet + */ + dp->txWaitTid = 0; + return 0; + +} + + +/* + * Shut down the interface + * FIXME: This is a pretty simple-minded routine. It doesn't worry + * about cleaning up mbufs, shutting down daemons, etc. + */ +static int +wd8003Enet_stop (struct iface *iface) +{ + unsigned int tport; + unsigned char temp; + /* + * Stop the transmitter + */ + tport=wd8003EnetDriver[0].port ; + inport_byte(tport+0x04,temp); + outport_byte(tport+0x04, temp & 0x7f); + outport_byte(tport + CMDR, MSK_STP + MSK_RD2); + return 0; +} + +/* + * Show interface statistics + */ +static void +wd8003Enet_show (struct iface *iface) +{ + printf (" Rx Interrupts:%-8lu", wd8003EnetDriver[0].rxInterrupts); + printf (" Not First:%-8lu", wd8003EnetDriver[0].rxNotFirst); + printf (" Not Last:%-8lu\n", wd8003EnetDriver[0].rxNotLast); + printf (" Giant:%-8lu", wd8003EnetDriver[0].rxGiant); + printf (" Runt:%-8lu", wd8003EnetDriver[0].rxRunt); + printf (" Non-octet:%-8lu\n", wd8003EnetDriver[0].rxNonOctet); + printf (" Bad CRC:%-8lu", wd8003EnetDriver[0].rxBadCRC); + printf (" Overrun:%-8lu", wd8003EnetDriver[0].rxOverrun); + printf (" Collision:%-8lu\n", wd8003EnetDriver[0].rxCollision); + printf (" Tx Interrupts:%-8lu", wd8003EnetDriver[0].txInterrupts); + printf (" Deferred:%-8lu", wd8003EnetDriver[0].txDeferred); + printf (" Missed Hearbeat:%-8lu\n", wd8003EnetDriver[0].txHeartbeat); + printf (" No Carrier:%-8lu", wd8003EnetDriver[0].txLostCarrier); + printf ("Retransmit Limit:%-8lu", wd8003EnetDriver[0].txRetryLimit); + printf (" Late Collision:%-8lu\n", wd8003EnetDriver[0].txLateCollision); + printf (" Underrun:%-8lu", wd8003EnetDriver[0].txUnderrun); + printf (" Raw output wait:%-8lu\n", wd8003EnetDriver[0].txRawWait); +} + +/* + * Attach an WD8003 driver to the system + * This is the only `extern' function in the driver. + * + * argv[0]: interface label, e.g., "rtems" + * The remainder of the arguemnts are key/value pairs: + * mtu ## -- maximum transmission unit, default 1500 + * broadcast y/n -- accept or ignore broadcast packets, default yes + * rbuf ## -- Set number of receive buffer descriptors + * rbuf ## -- Set number of transmit buffer descriptors + * ip ###.###.###.### -- IP address + * ether ##:##:##:##:##:## -- Ethernet address + * irno -- Set controller irq + * port -- Set io port + * bpar -- Set RAM address + */ +int +rtems_ka9q_driver_attach (int argc, char *argv[], void *p) +{ + struct iface *iface; + wd80x3EnetDriver *dp; + char *cp; + int i; + int argIndex; + int broadcastFlag; + char cbuf[30]; + + /* + * Find a free driver + */ + for (i = 0 ; i < NSCCDRIVER ; i++) { + if (wd8003EnetDriver[i].iface == NULL) + break; + } + if (i >= NSCCDRIVER) { + printf ("Too many SCC drivers.\n"); + return -1; + } + if (if_lookup (argv[0]) != NULL) { + printf ("Interface %s already exists\n", argv[0]); + return -1; + } + dp = &wd8003EnetDriver[i]; + + /* + * Create an inteface descriptor + */ + iface = callocw (1, sizeof *iface); + iface->name = strdup (argv[0]); + + /* + * Set default values + */ + broadcastFlag = 1; + dp->txWaitTid = 0; + dp->rxBdCount = RX_BUF_COUNT; + dp->txBdCount = TX_BUF_COUNT * TX_BD_PER_BUF; + dp->irno = 5; + dp->port = 0x240; + dp->base = 0xD0000; + dp->bpar = 0xD0000; + iface->mtu = 1500; + iface->addr = Ip_addr; + iface->hwaddr = mallocw (EADDR_LEN); + memset (iface->hwaddr, 0x08, EADDR_LEN); + + /* + * Parse arguments + */ + for (argIndex = 1 ; argIndex < (argc - 1) ; argIndex++) { + if (strcmp ("mtu", argv[argIndex]) == 0) { + iface->mtu = atoi (argv[++argIndex]); + } + else if (strcmp ("broadcast", argv[argIndex]) == 0) { + if (*argv[++argIndex] == 'n') + broadcastFlag = 0; + } + else if (strcmp ("rbuf", argv[argIndex]) == 0) { + dp->rxBdCount = atoi (argv[++argIndex]); + } + else if (strcmp ("tbuf", argv[argIndex]) == 0) { + dp->txBdCount = atoi (argv[++argIndex]) * TX_BD_PER_BUF; + } + else if (strcmp ("ip", argv[argIndex]) == 0) { + iface->addr = resolve (argv[++argIndex]); + } + else if (strcmp ("ether", argv[argIndex]) == 0) { + argIndex++; + gether (iface->hwaddr, argv[argIndex]); + } + else if (strcmp ("irno", argv[argIndex]) == 0) { + dp->irno = atoi (argv[++argIndex]); + } + else if (strcmp ("port", argv[argIndex]) == 0) { + sscanf(argv[++argIndex], "%x", &(dp->port)); + } + else if (strcmp ("bpar", argv[argIndex]) == 0) { + sscanf(argv[++argIndex], "%x", &(dp->bpar)); + dp->base = (char *)(dp->bpar); + } + else { + printf ("Argument %d (%s) is invalid.\n", argIndex, argv[argIndex]); + return -1; + } + } + printf ("Ethernet address: %s\n", pether (cbuf, iface->hwaddr)); + printf ("Internet address: %s\n", inet_ntoa(iface->addr)); + printf ("Irno: %X, port: %X, bpar: %X, base: %X\n",dp->irno, dp->port, + dp->bpar, dp->base); + fflush(stdout); + /* + * Fill in remainder of interface configuration + */ + iface->dev = i; + iface->raw = wd8003Enet_raw; + iface->stop = wd8003Enet_stop; + iface->show = wd8003Enet_show; + dp->iface = iface; + setencap (iface, "Ethernet"); + + /* + * Set up SCC hardware + */ + wd8003Enet_initialize_hardware (dp, broadcastFlag); + fflush(stdout); + + /* + * Chain onto list of interfaces + */ + iface->next = Ifaces; + Ifaces = iface; + + /* calibrate a delay loop for 2 milliseconds */ + rtems_clock_get(RTEMS_CLOCK_GET_TICKS_PER_SECOND, &loopc ); + loopc /= 500; + + /* + * Start I/O daemons + */ + cp = if_name (iface, " tx"); + iface->txproc = newproc (cp, 1024, if_tx, iface->dev, iface, NULL, 0); + free (cp); + return 0; +} + + + + + + + -- cgit v1.2.3