From eb36d1198cdf9dc1e2f776ef6e1e38755f6d13c5 Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Wed, 25 Apr 2018 15:06:08 +0200 Subject: bsps: Move documentation, etc. files to bsps This patch is a part of the BSP source reorganization. Update #3285. --- bsps/arm/lpc24xx/README | 52 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 bsps/arm/lpc24xx/README (limited to 'bsps/arm/lpc24xx') diff --git a/bsps/arm/lpc24xx/README b/bsps/arm/lpc24xx/README new file mode 100644 index 0000000000..47cc16150d --- /dev/null +++ b/bsps/arm/lpc24xx/README @@ -0,0 +1,52 @@ +Development Board: QVGA Base Board from Embedded Artists + +http://www.embeddedartists.com/products/uclinux/oem_lpc2478.php + +Drivers: + + o Console + o Clock + o RTC + o SSP (SPI mode) + o Network + o I2C + +Howto setup QVGA Base Board? + + o Unpack board. + o Connect board via USB to your PC. + o Verify that demo application runs. + o Disconnect board. + o Change jumpers to enable ISP. + o Connect board. + o Load U-Boot image 'u-boot_v1.1.6_lpc2468oem_v1_8_16bit.hex' + (available from the EA support page) into the flash (flash tool + FlashMagic is availabe from NXP). + o Change jumbers back to disable ISP. + o Use a terminal program to change the U-Boot settings via the console. + o U-Boot settings: + set ethaddr '00:1a:f1:X:X:X' + set serverip 'X.X.X.X' + set ipaddr 'X.X.X.X' + set rtems 'tftp a1000000 lpc2478.img;bootm' + set bootcmd 'echo Booting RTEMS ...;run rtems' + saveenv + +Howto make a U-Boot image? + +mkimage -A arm -O rtems -T kernel -C gzip \ + -a a0000000 -e a0000040 -n "RTEMS Application" -d app.bin.gz app.img + +Application Board: NCS (Nurse Control Station) + + Board: NextGenNCS + Processor: NXP LPC2478 or LPC2470 + SDRAM: 8MByte, 16 bit wide + Ext. Flash: 1MByte, 16 bit wide + Console: UART, 115200 Baud + Network: 100Base-T + +Application Board: TLI800 + TLI800 is a network node using four serial ports produced by Thorn + Security Limited. It is used by Tyco Fire & Integrated Solutions for a + fire control network. -- cgit v1.2.3