From e32fdfa442c55daa664e7c1adb3720e2e4c61a08 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Fri, 25 May 2001 16:39:11 +0000 Subject: 2001-05-25 Joel Sherrill * README.configure: Corrected the name of the MRM332 BSP. Strengthened the distinction between what the target and the BSP each select. Added more targets to list. --- README.configure | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'README.configure') diff --git a/README.configure b/README.configure index f8dc57aa60..83069aaf9e 100644 --- a/README.configure +++ b/README.configure @@ -88,19 +88,25 @@ unless directly specified. There are two ways of changing this: + set the RTEMS_BSP variable during make (see below). The --enable-rtemsbsp= option configures RTEMS for a specific target -architecture. The following targets are supported: +architecture. Remember that the target specifies the CPU family while +the BSP specifies the precise board you will be using. The following +targets are supported: (none) will build the host-based version on Linux, Solaris and HPUX. a29k-rtems only standalone, uses non-gnu compiler + arm-rtems + h8300-rtems i386-rtems i960-rtems hppa1.1-rtems m68k-rtems + mips-rtems mips64orion-rtems no_cpu-rtems powerpc-rtems + sh-rtems sparc-rtems bare see notes @@ -181,7 +187,7 @@ i960 : cvme961 i960sim rxgen960 hppa1.1 : simhppa m68k : dmv152 efi332 efi68k gen68302 gen68340 gen68360 gen68360_040 idp mvme136 mvme147 mvme147s mvme162 ods68302 - mrm + mrm332 no_cpu : no_bsp mips : p4600 p4650 (p4000 port with either R4600 or R4650) jmr3904 genmongoosev -- cgit v1.2.3