From a2a40272d2165a3346e939b061e2185f456fe04f Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Thu, 2 Oct 2008 21:44:50 +0000 Subject: 2008-10-02 Joel Sherrill * README.configure, aclocal/bsp-alias.m4, aclocal/check-bsps.m4: Add M32C port and m32csim BSP. --- README.configure | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-) (limited to 'README.configure') diff --git a/README.configure b/README.configure index e20999d19e..60916b5055 100644 --- a/README.configure +++ b/README.configure @@ -90,25 +90,20 @@ The following targets are supported: (none) will build the host-based version on Linux, Solaris and HPUX. - arm-rtems4.9 - tic4x-rtems4.9 - h8300-rtems4.9 - i386-rtems4.9 - m68k-rtems4.9 - mips-rtems4.9 - no_cpu-rtems4.9 - powerpc-rtems4.9 - sh-rtems4.9 - sparc-rtems4.9 + arm-rtems4.10 + bfin-rtems4.10 + h8300-rtems4.10 + i386-rtems4.10 + m32c-rtems4.10 + m68k-rtems4.10 + mips-rtems4.10 + no_cpu-rtems4.10 + powerpc-rtems4.10 + sh-rtems4.10 + sparc-rtems4.10 bare see notes -The cross-compiler is set to $(target)-gcc by default. This can be -overridden by: - -+ using the --program-prefix option to configure to specify the - string which will prepended to the tool names. Be sure to include - a trailing "-". For example, to use a m68k-coff toolset, use the - --program-prefix=m68k-coff- option. +The cross-compiler is set to $(target)-gcc by default. To build, run make in the build directory. To specify which bsps to build, add the RTEMS_BSP="bsp1 bsp2 .." to the make command. Specifying multiple @@ -182,6 +177,8 @@ i386 : i386ex pc386 pc386dx pc486 pc586 pc686 pck6 ts_386ex variety of PC configurations including PC-104 based solutions. +m32c : m32csim + m68k : av5282 csb360 gen68302 gen68360 gen68360_040 genmcf548x idp mcf5206elite mcf52235 mcf5235 mcf5239 m5484FireEngine mrm332 mvme136 mvme147s mvme162 mvme162lx -- cgit v1.2.3